Database Develop

Removed SD Card

Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.

te5ter said:
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
Click to expand...
Click to collapse
sounds like a corrupted partition try repair ext file systems if that dosent work youve got to format partition and reinstall all apps.
btw does youre fat32 partition work?

te5ter said:
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
Click to expand...
Click to collapse
If it only happened once it shouldn't be an issue, but if it does it wouldn't hurt to format your ext.
In recovery
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -r /system/sd/*

I tried repairing my ext, no luck.
Whenever i try to mount in recovery console i get error : No such file or directory

te5ter said:
I tried repairing my ext, no luck.
Whenever i try to mount in recovery console i get error : No such file or directory
Click to expand...
Click to collapse
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.

I cant recall which tutorial i fallowed, but it was all done through the terminal or recovery. Could you possibly point me to the right thread?

AdrianK said:
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
Click to expand...
Click to collapse
if you can remember the start and end of youre ext partition i think you can do this in parted by typing print then note down the start and end then type mkpartfs primary ext2 start - end

te5ter said:
I cant recall which tutorial i fallowed, but it was all done through the terminal or recovery. Could you possibly point me to the right thread?
Click to expand...
Click to collapse
Here you go, follow the second section.
http://android-simplicity.blogspot.com/2009/08/how-to-6-how-to-partition-your-sdcard.html

Everytime i try to mount in recovery i get "mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: device or resource busy"
I'm lost.

pull your battery our for 30 seconds or so. remove your sd card then reinsert it and then try again. if that doesnt work then do what the others guys have said and try to reformat your sd card and start from scratch.

AdrianK said:
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
Click to expand...
Click to collapse
Actually, with Parted you can just rm and mkpartfs any partition you want without affecting the other partitions.

I bit the bullet and just formated all the partitions.
Thanks anyways guys.

My advice for next time or any body else reading would be to download a live CD for ubuntu or fedora or similar and boot your PC off that - it's graphical and v. easy.
Or just dump windows altogether and go for linux ;-)
Smiffy.

Lordsmiff said:
My advice for next time or any body else reading would be to download a live CD for ubuntu or fedora or similar and boot your PC off that - it's graphical and v. easy.
Or just dump windows altogether and go for linux ;-)
Smiffy.
Click to expand...
Click to collapse
Yeah Gparted is amazing problem is then you have to walk the person through downloading, burning the image...which can be painful.

This is still happening, fresh format on sd card partitios and a wipe and clean install of Jacxrom.
Bad sd card? Or the phone?

JACxROM [v1.3]
I am attempting to flash to this ROM. Everything seems to go as describen in other posts, but when I power up the phone, I never make it past the splash screen. Any thoughts??

sorry
Sorry I posted this in the wrong place, I will move it.
rberger13 said:
I am attempting to flash to this ROM. Everything seems to go as describen in other posts, but when I power up the phone, I never make it past the splash screen. Any thoughts??
Click to expand...
Click to collapse

Bump, dead SD card?

partition corrupted anyway to recover?
I need help please!
I was running cyanogen 4.0.3.1 just installed today morning then changed theme to enoch 1.12 the newest one that worked fine. Updated the browser to loccys Then installed the HTC music and when finally rebooted the phone it was working fine until I noticed I had none of my apps on the sdcard.
All I have is syste/app folder which runs internally I think everything else does not work. It's like my sdcard is not in.
I shutdown rebooted and waited. Then removed sdcard rebooted and inserted the card one fully powered on and it is saying it wants to format it.
I get home turn my ubuntu system on and it detects it as a ext3 partition yet nothing inside. and now no fat32 partition or linux-swap.
anyways to recover or am I SOL?

SDCARD

Well I'm on xROM with HardSPL, stop the flaming I know. My SD CARD doesn't work on xROM so I have to someone downgrade without using a SD Card. Anyway I can do it so I can pop my SD Card back in and reroot? Or somehow change back to Cyan's ROM?

how are you on xRom with the hard spl?

Hey you are up late, wow you have nothing but problems with your sdcard, might want to invest the $15 for a new one.
Can you mount your sd in recovery console by typing ums_enable

That's the thing I had HardSPL and put the xROM in my SDCard and ran it through bootloader. Now nothing works, only calling and messaging. No Wifi nothing. I need to get out if you can help.

gridlock32404 said:
Hey you are up late, wow you have nothing but problems with your sdcard, might want to invest the $15 for a new one.
Can you mount your sd in recovery console by typing ums_enable
Click to expand...
Click to collapse
I can try.

Strless01 said:
That's the thing I had HardSPL and put the xROM in my SDCard and ran it through bootloader. Now nothing works, only calling and messaging. No Wifi nothing. I need to get out if you can help.
Click to expand...
Click to collapse
wtf..... ummm boot into recovery with a cm rom on your sdcard. wipe your phone. flash the cm rom.

I was also wondering that one too david, I was pretty sure you needed the danger spl to run xrom, maybe he means the xrom theme

How do I get back to cyans ROM?

Did you make a nandroid backup at any time like I told you too

gridlock32404 said:
Did you make a nandroid backup at any time like I told you too
Click to expand...
Click to collapse
That would be something I failed at. ): But I'm sticking my card in my dads phone, formatting it then sticking it back in the G1 hope this works!
It's working fine on his phone but not on mine. FML.

His phone prob did not format to fat32, can you mount your card in recovery, try mounting it to your computer with the command I gave you

gridlock32404 said:
His phone prob did not format to fat32, can you mount your card in recovery, try mounting it to your computer with the command I gave you
Click to expand...
Click to collapse
I do, do that but it doesn't read it. It says format and I press it and then it says Unable to format.
It's working fine on my dads phone.

Strless01 said:
I do, do that but it doesn't read it. It says format and I press it and then it says Unable to format.
It's working fine on my dads phone.
Click to expand...
Click to collapse
try to partition it via the recovery console

Try it on your other computer, have you tried throwing against a way yet
Did you ever get a cd-r so you can make a live ubuntu cd yet

david1171 said:
try to partition it via the recovery console
Click to expand...
Click to collapse
How do I do that? I am in the console.

Oh yeah, now that you have cm-recovery 1.4, you can do that now
Hey david can you give this nice young man the commands

gridlock32404 said:
Oh yeah, now that you have cm-recovery 1.4, you can do that now
Hey david can you give this nice young man the commands
Click to expand...
Click to collapse
Is it going to erase all my contacts again?

Formating the card. No. The wipe you are going to need to do before you flash a new rom on your phone, yes and you will have to sign back into google again

gridlock32404 said:
Formating the card. No. The wipe you are going to need to do before you flash a new rom on your phone, yes and you will have to sign back into google again
Click to expand...
Click to collapse
Will I be able to sign in with WIFI? And I'm okay with the contacts, but whats the command to partition it?

To delete existing partitions and repartition via recovery console, here are the commands once you've entered console and then hit enter to get to the prompt:
Copied & pasted from another thread HERE...
parted /dev/block/mmcblk0
print (to verfiy we know what size card we are dealing with. Mine was 8166 read below if yours is different)
rm 1 (if you had more than 1 partition you would want to rm them as well)
mkpartfs primary fat32 0 7622
mkpartfs primary ext2 7622 8134
mkpartfs primary linux-swap 8134 8166
quit
upgrade_fs
recovery
If you just want one partition for fat32, just use the first mkpartfs command and use 0 through whatever the total size of your card is...

Help JF out!!!(Not JesusFreak)

sup everybody
yo i just got a class 6 8gb microsdhc card i was happy nstuff getting ready to set it up for my g1(use to have a 4gb card)
and i formated it with all the partitions etc.
i put my backup of my fat32 partition on my new card
and i was getting ready to flash and going through the procedures of wipe/repair/flash
but when repairing my ext filesystems
it gives me an error no matter what i do saying that it cant mount the sdcard period!!! so i took off my backup of my fat thinking that it was effecting it, and it wasnt. Giving me the same error
so what am i missing here???
what do i do to get my g1 running again
what am i doing wrong

try to re-partition your card again. (also its freke)

im repartiton again
lol i can always rely you david to come on in and help a n*gga out

Don't wipe. Use switchrom.sh (see sig) on your 4GB and just restore to your 8GB. No wipe and good as new in minutes.

well fcuk i wiped but i though i remember devsk saying if you reformat the system sd then you cant restore with switchrom becuase it only stores the app and app private data or something like that correct me if im wrong?

yo wait i repartitioned and i got a switchrom back up!!!yes
but ithought it runs off the system sd which i dont have acess to
idk ill figure it out if i need help ill re reply

you can't restore it bc you won't have the switchrom.sh on your ext3 just put it back on and then restore. the dalvik-cache gets recreated each boot.

fkuc yes i did it
i found out you can do it throught the sdcard instead of the system/sd
dam i love everyone there so creative lol
ok thnxs guys and later david : P

jf4888 said:
fkuc yes i did it
i found out you can do it throught the sdcard instead of the system/sd
dam i love everyone there so creative lol
ok thnxs guys and later david : P
Click to expand...
Click to collapse
switchrom.sh is the best thing you can do for your Android device. Period! I flash like crazy now. I've tried just about every ROM there is and when I'm done, I switchrom back to my usual setup. I even swap SD cards when I feel like it. It's awesome.

SD card issues

So, I got a 4GB sdcard the other day. It came out of a blackberry a friend of mine was using. I formatted the card to FAT32 with the utility in windows 7, and everything seemed to be fine. I downloaded ext2fsd to be able to copy my ext partition to my new card. I followed the directions from the website about mounting the ext partition.
After I performed the steps above, my sdcard became unusable. I tried to take it out, and put it back in my card reader, and I get an error saying windows needs to format the drive, if I try to format it, it doesn't work. I've tried in gparted as well, and also get an error. I even tried from Amon's revorery, and sdparted in the console. I don't get errors with the latter two, but my card reader still says it's RAW.
I know that was lengthy, but I'm trying to figure out anymore steps to take, or if I should just throw the card away.
Thanks

ok..
wow.
You have to have 3 partitons. If you only format it with 1 partiton, you cant save data on a partition that doesnt exsist.
You have to go to recovery console and make a fat32, ext3 and linux swap partion.
I dont have the patience to go trhough it all with you because its in 100 different threads so .. use search?
Not trying to be rude, but this is stuff you can fin don your own here very easily if you werent expecting someone to do it for you
EDIT-- sorry, dont think i read fully what you did. I had this same thing happen today on a friends brand new 8gb.
HEres what I did since you have Amen ras recovery..
Format to just FAT32.
Turn on usb
give it a second to pop up and it will and check the size.
Then turn off the usb, go into parted on console, rm 1, then remake all 3 partitons according to the size of the card.
I suggest not using the full partiton in the recovery because it usualy screws up the swap.
From there you will be fine.
If it doesnt work that way, then im sorry, the card may be pooped or to low a class maybe?

crypysmoker said:
ok..
wow.
You have to have 3 partitons. If you only format it with 1 partiton, you cant save data on a partition that doesnt exsist.
You have to go to recovery console and make a fat32, ext3 and linux swap partion.
I dont have the patience to go trhough it all with you because its in 100 different threads so .. use search?
Not trying to be rude, but this is stuff you can fin don your own here very easily if you werent expecting someone to do it for you
EDIT-- sorry, dont think i read fully what you did. I had this same thing happen today on a friends brand new 8gb.
HEres what I did since you have Amen ras recovery..
Format to just FAT32.
Turn on usb
give it a second to pop up and it will and check the size.
Then turn off the usb, go into parted on console, rm 1, then remake all 3 partitons according to the size of the card.
I suggest not using the full partiton in the recovery because it usualy screws up the swap.
From there you will be fine.
If it doesnt work that way, then im sorry, the card may be pooped or to low a class maybe?
Click to expand...
Click to collapse
Yeah, I know you're not trying to be rude, but I know I need 3 partitions. I'm pretty aware of the way a sd card needs to be partitioned. I've tried everything mentioned. I think it's about time to call it quits. It's a class 2 card, so I don't think that's the issue, and I can't format in Ubuntu, or Windows. Oh well I suppose. Thanks.

You can try this app. Its called Sd formatter...it reformats the SD. IT worked for me.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html

cholito said:
You can try this app. Its called Sd formatter...it reformats the SD. IT worked for me.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Click to expand...
Click to collapse
I forgot to include this in the original list of things I tried, but I did give it a go. It is telling me the card is write-protected even though the switch on the adapter is set to the unlocked position. I've also tried it with a different adapter. I appreciate everybody's input.

well try using parted commands to write from block 0 to the last block and partition the whole thing as fat32
is that not working?

did you tried partitioning with RA 1.2.3 recovery?

@B-man007
I haven't tried writing the whole thing to FAT32 with parted. I'll give that a try tonight (don't have the card with me).
@cholito
I'm using RA 1.2.2, I think the script is the same, so I don't know that it would make a difference if I was using that or 1.2.3

Another sdcard thread....cm 4.2.5 apps2sd/swap is locking me up

Hello.. as the title states im having issues.
ok, so i recently rooted my g1when i saw Gnav was live (w00t) and all was well until i decided to partition my pqi class6 4gb partitioned as listed below.
ok heres the kicker.. every thing is fine until i start installing apps then it will just lock up then when i try to restart i get a black screen after the cm loading screen and thats it.. only way to get it back to life is to delete then repartition the card...... i reflashed, repartitioned and factory reset about 10 times and finally gave up and wiped card back to full fat32 and no swap or ext3 then reflashed cm 4.2.5 and have been running flawless for a week now so i have narrowed it down to my sdcard... any ideas on WTF could be going on here?? are pqi cards no good maybe?? it was real cheap i caught a deal on it about a year ago.. something like 2x4gb for 15 bucks shipped. I have never had any file loss when using it just for storage or anything.
heres how i had the partitions layed out
0 3459
3459 3971
3971 4003
i also tried ext4 aaaand out of desperation cm 4.2.4 with no luck
any insight greatly appreciated, I didnt know if i should post this here,in development or accessories but its a Q and im lookin for a A
Thanx
-Bop

Well I had the same issue with my phone, but I switched over to Amon-RA recovery and it does SdCard partition for you, You just have to enter the number's you want and it does the rest in recovery mode. This is how to flash it on this page. http://forum.xda-developers.com/showthread.php?t=566669.

errrm i dont think the recovery is the issue, i really like cm 1.4 for the fact that it has a console
thanx.
Next

Amon_RA has a console too....
if you dont want to use that, then format it through parted with 1.4
Amon_RA's does the same thing but its much easier (he basically added automated scripts to the 1.4 recovery, since it is actually based off 1.4)

Thanx.....but that's not my issue, please thouroghly read my opening post.
Thanx again
Also I should probably add one note here....it don't lock up as soon as I install a app.... I can get 3 to 5 apps in be4 what's explained in my OP happens.

BopChie said:
Thanx.....but that's not my issue, please thouroghly read my opening post.
Thanx again
Also I should probably add one note here....it don't lock up as soon as I install a app.... I can get 3 to 5 apps in be4 what's explained in my OP happens.
Click to expand...
Click to collapse
Well get us a logcat of when that crash happens. It seems like bad partitioning but get us a logcat and we can narrow down the issue

B-man007 said:
Well get us a logcat of when that crash happens. It seems like bad partitioning but get us a logcat and we can narrow down the issue
Click to expand...
Click to collapse
ok, i dont know how to do so and is this something i can fetch after the os is crashed via recovery console and dump to sd??
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
also.. take a look below, am i not doing something right here???
i did all the partitioning in parted as below
after removing all partitions i have a 4003MB chunk
mkpartfs primary fat32 0 3459
mkpartfs primary ext2 3459 3971
mkpartfs primary linux-swap 3971 4003 <---maybe i should try 4000 and not goto the end of the sd??
then after i'm out of parted
upgrade_fs to get ext3
tahnx again

BopChie said:
ok, i dont know how to do so and is this something i can fetch after the os is crashed via recovery console and dump to sd??
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
also.. take a look below, am i not doing something right here???
i did all the partitioning in parted as below
after removing all partitions i have a 4003MB chunk
mkpartfs primary fat32 0 3459
mkpartfs primary ext2 3459 3971
mkpartfs primary linux-swap 3971 4003 <---maybe i should try 4000 and not goto the end of the sd??
then after i'm out of parted
upgrade_fs to get ext3
tahnx again
Click to expand...
Click to collapse
that seems right..
if you have ADB setup, type in
adb logcat
just before installing apps. When it crashes, it should give error messages which we will be able to help you with. Post it here in code tags or post it on pastebin.com

BopChie said:
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
Click to expand...
Click to collapse
..........
B-man007 said:
that seems right..
if you have ADB setup, type in
adb logcat
just before installing apps. When it crashes, it should give error messages which we will be able to help you with. Post it here in code tags or post it on pastebin.com
Click to expand...
Click to collapse
currently i dont but i can get it setup again and give a try.. see my nandroid Q please

BopChie said:
..........
currently i dont but i can get it setup again and give a try.. see my nandroid Q please
Click to expand...
Click to collapse
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup

B-man007 said:
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
Click to expand...
Click to collapse
ok think i got it solved here... using logcat on a boot after partitioning the card i could see it was hitting a infinite loop and had todo with some prop's i had swapped out for Gnav.. but since that is official on 1.6+ now i was able to reflash cm and sofar so good, installed 10 apps with apps2sd live and notta prob
Thanx a ton

B-man007 said:
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
Click to expand...
Click to collapse
ok think i got it solved here... using logcat on a boot after partitioning the card i could see it was hitting a infinite loop and had todo with some prop's i had swapped out for Gnav.. but since that is official on 1.6+ now i was able to reflash cm and sofar so good, installed 10 apps with apps2sd live and notta prob
Thanx a ton

haha ok well its good to know you got it working

yeah so far so good.. 1last q...i have read mixed angles on enabling swap on sd.. i saw some1 say if its there cm4.2.5 will use it.. but i have saw ppl say it needs to be enabled.
I have never saw my mem get lower than 20MB should i even bother with swap?

its not enabled by default, you have to do it yourself. You shouldnt really need it on a cyan ROM.