Cant send sms :/ cant use active sync - XPERIA X1 Q&A, Help & Troubleshooting

hi all, my prob is " The call barring settings are now enabled " when tried to send some sms :/
What's the matter ?
2nd problem is = I cant connect my phone with active sync.
When tried to change setting in usb settings my pc do not recognize the DISK DRIVE too !!!
Conculsion = i cant send sms (have no limit free sms)
i cant CHANGE my rom !!!!!!! (have energy rom atm)
i cant transfers somes files to my phone
ps : havent sd reader
if some one can help me no problem...

Cannot Connect
Dialed:
the answering modem has been disconnected.
To change your connection settings and change them if needed, tap settings.
My Location:
There is a problem with the connection to ther gprs service in your registered home network.
This open up all the minutes...
Thanks for help

If you can backup your data onto your SD card, I'd suggest a hard reset.
Did you install any apps or flash a new ROM? Something might have changed your settings or messed up a few files/reg entries and caused this

ok thanks you but now its solved, my phone was blocked by bouygues telecom...
But have a second probleme that is my phone cant be detected by my computer, as storage card or with activesync its same !!!

Related

GPS ROM & WM5torage

Im using the dopod rom withiut any problems... but i cannot use wm5torage program anymore...
Any solution for this?
vdias said:
Im using the dopod rom withiut any problems... but i cannot use wm5torage program anymore...
Any solution for this?
Click to expand...
Click to collapse
Try with some program to boot in safe mode.
That work's for me.
safe mode
I have the same problem...
please could you better explain what does it mean to boot in safe mode ?
thank a lot
vdias said:
Im using the dopod rom withiut any problems... but i cannot use wm5torage program anymore...
Any solution for this?
Click to expand...
Click to collapse
Strange...
I can use Wm5torage without problems.
Only had to reinstall the program .
settings
could anybody details used settings ?
installed on device orin storage card?
other settings ?
I tried 4 times , both destinations , eveytime I get an error popup when I try to activate.
In Hermes you need to do this before using WM5Torage:
Settings --> Connections --> USB to PC and disable "advanced USB functions"
error
I tried again , that flag was off
the error says
:Can't switch to mass storage usb driver , error if.......
any idea?
A bit strange. I clicked the submit button only once but had a double posting.
@tower5
problem seems to be related to a programm which is always checking your space on sd card or something like that. Iam using Pocket Plus to bring my device up in safe mode. so far so good.
I still have not found out which programm is always have access to sd card.
Maybe it is the system itself which always have access.
Hope this helps in any way.
WM5torage
Forgive me, what is WM5storage? Is it an extra storage space? I have just got my D810 flash, do I need to flash it again?
thks
I have the same problem too.
First time I have start wm5torage (v.173) I can browse my miniSD, but when I try to copy something it dosen't responce.
I think wm5torage "disconnect" card from PDA system and not send to system signal that it run. System power manager put itself to "half-sleep mode" for batary economy.
I try to chek this. Just switch to today and press UP and Down keys to prevent Trinity to sleep.
Great !!! wm5storage work !!!
I cheked that with different GPS ROM's
I use Softick Card Export II and works without problems.
WM5torage donĀ“t works me when is ANY program installed in storage card - unusable.
!SOLUTION! WM5torage !SOLUTION!
Hi all,
Just like to add my input as I was frustrated with this for a long time. The program that seems to be problematic is called "VCDaemon.exe". It is some background process for "Cyberon Voice Commander". It runs in the background and seemingly decreases the load time when you hit the voice command button. What I have done is stop it from automatically loading by removing the link from "\Windows\Startup\". What you could also do is use "Task Manager" to kill the process which also worked for me. However, everytime you start up voice commander the process will restart itself so you will need to kill it again.
Needless to say as well that WM5torage, cannot be installed to the storage card as otherwise it cannot lock the storage card.

Big Problem with Contacts ( please help )

hello, i am using Kaiser now , i had over than 300 contacts on it , yesterday formated my desktop pc and reconect the kaiser to the active sync software , it asked for relationship , so i made it normaly , when done , all my contacts gone away !!!! cz the outlook on the pc was new after formating !!!!!!! , how i can get them back !! i tried to search on ( Parament save ) icon in the setting like i was doing with w2003se in pda2k before but its not availabe on this windows 6 !!
p.s i was using pda2k for long time and i have a backup made by active sync with pda2k and active sync that time ( before 10 days ) then the pda broke completely , ,, its .stg file , 30 mb ,,,
can we do something guys ? i really need that contacts
waiting for help
regards
come on guys , i need your help up
This is a commond problem. Try this solution. After you synch (during which time I presume you have no contacts on your Kaiser), go to tools-->options and uncheck contacts. Sync again. Then reenable contacts. Good chance the contacts will now transfer. Do not remove the USB cable during the process.Hope this works for you.
its me said:
hello, i am using Kaiser now , i had over than 300 contacts on it , yesterday formated my desktop pc and reconect the kaiser to the active sync software , it asked for relationship , so i made it normaly , when done , all my contacts gone away !!!! cz the outlook on the pc was new after formating !!!!!!! , how i can get them back !! i tried to search on ( Parament save ) icon in the setting like i was doing with w2003se in pda2k before but its not availabe on this windows 6 !!
p.s i was using pda2k for long time and i have a backup made by active sync with pda2k and active sync that time ( before 10 days ) then the pda broke completely , ,, its .stg file , 30 mb ,,,
can we do something guys ? i really need that contacts
waiting for help
regards
Click to expand...
Click to collapse
Umm, im not 100% sure what your saying, Did you have your contacts on the phone already or only on outlook?
Neurodoc said:
This is a commond problem. Try this solution. After you synch (during which time I presume you have no contacts on your Kaiser), go to tools-->options and uncheck contacts. Sync again. Then reenable contacts. Good chance the contacts will now transfer. Do not remove the USB cable during the process.Hope this works for you.
Click to expand...
Click to collapse
Got ya now, Yeah this is a common problem, I did the same thing and i was able to get my contacts back.
thank you a lot dear bro.
its already unchecked , i told you , when first sync with new-formated pc i unchecked it , so i lost the contacts , i don't know exactly why that happend , but i need to restore them back , plz guys anyone has any idea to solve that problem
thanx Again Neurodoc , i will try to check and uncheck it again and let you know anyway
waiting for solution
dear ManTheDan it seems we were writing in the same time ,
i am trying my best , i told you what happend exactly
, i formated my pc , outlook got empty contacts , then when the first sync i didn't check anything in the wizard connection , i thought that i wanat it only for charging , and i noticed that my outlook is empty cz pc formated , so i didn't check anything ...... when got CONNECTED on active sync ,, all contacts has been gone ,,,, empty on kaiser as well as outlook !
any other ideas guys ? plz
thank you too much
Since it sounds like your contacts are no longer in Outlook on your PC because it was re-formatted, I think the ony way to get them back is via a back-up you had done before this problem existed. Reading your post, it sounds like you had done a back-up, but that it is "broken". I am not sure what that means, but I would try it.
Well if you do have the .stg file try setting up outlook again and restoring using that file via active sync restore option under tools i think. Not sure if you reformated your computers after you had saved your contacts, sorry if i dont understand, just trying my best
Check your deleted folder in outlook, thats where it puts everything after you synced, if you empty it entirely(a lot or daily) then your doomed if not copy paste them back in to the contacts and sync, happened to me but a different way of it happened.
(had contacts then synced, then deleted them off the sim and somehow out of my stupidity I deleted both. . .and then I was looking and looking and then someone told me that and I did what I said and then they synced back and I put them back on both and just used kaiser tweak to hide sim contacts.)
outlook has no contacts , cz the pc completely has been formated , and i installed new outlook ,, so its empty !!!! and got the kaiser also empty even i didn't check the contacts when sync it for the first time !!
stg file is good , but i got from the pda2k before break the device , i mean i broke the device completly ( destroied pda2k ) so noway to get it back again as working device , ,,
i thought about to restore it into win2003 emulator sfotware , then transfer the contacts into outlook , then from outlook i can get them on kaiser ,, but also the mobile devie emulater software didn't read the stg file cz it got from other machine as said ...
now trying to get a pda2k from a friend and restore the stg file into it , to fill out the outlook , then get in back into kaiser , thats the only logic idea i think ,right guys ?
thank you alot ,, any other idea's or similler problem plz post , i would be thankfull
regards
you can extract the contacts from the stg file, i've done it before with my blue angel. search the forums, it has to be around somewhere. and you might wanna use google to search, cause any info will probably be way to old for a plain search
found this thread http://www.pocketpcmag.com/forum/topic.asp?TOPIC_ID=18858 on extracting databased out of .stg files. dunno if it'll help, but hope it does. good luck
thank you too much dear , you are very helpfull
i already tried to open and extract the stg files , but couldn't !!
i tried some softs , wihtout results , only last one when somynex directed me to stg viewer I couldn't find it , i will try to find it , plz if you have other way to extract the stg file and get the contacts db from it let me know ,
by the way , the stg fle was taken from i-mate pda2k , its like ablue angel same same ,, so i just want to view the contacts to register them , even manually ,, thank you
regards
So you deleted contacts before you synced on outlook after you formatted? Or you deleted them after you synced on accident? Because you would check the deleted folder and then copy paste them back. I know you re-installed windows.
its me said:
outlook has no contacts , cz the pc completely has been formated , and i installed new outlook ,, so its empty !!!! and got the kaiser also empty even i didn't check the contacts when sync it for the first time !!
stg file is good , but i got from the pda2k before break the device , i mean i broke the device completly ( destroied pda2k ) so noway to get it back again as working device , ,,
i thought about to restore it into win2003 emulator sfotware , then transfer the contacts into outlook , then from outlook i can get them on kaiser ,, but also the mobile devie emulater software didn't read the stg file cz it got from other machine as said ...
now trying to get a pda2k from a friend and restore the stg file into it , to fill out the outlook , then get in back into kaiser , thats the only logic idea i think ,right guys ?
thank you alot ,, any other idea's or similler problem plz post , i would be thankfull
regards
Click to expand...
Click to collapse
Hello there,
Check the "DELETED" folder of the outlook, sometimes the contacts can end up there.... doesnt harm to check..even if its a brand new outlook.
But the possibility of that to is very less, as the contacts have been deleted from ur mobile, not from ur outlook...
I mentioned that but he didn't listen. . .
Yeah...
What happened is you setup a new sync partnership and it deleted your contact since "desktop overwrites mobile" is the default in ActiveSync. This is common and unfortunately irreversable. For future reference, when you wipe out your pc make sure you go into Outlook and do a file> import & export > export to a file > .PST > and save that all important .PST file somewhere safe. That file will contain your mail, calendar, contacts, notes, to-do's.
Sorry to be the bearer of bad news, but I don't think your getting that info back unless you backed up your entire C: drive.
Well, they should be in the deleted folder in outlook then. If the OP doesnt want to look and see them in deleted then its his problem.
ok guys , i told you that i formated the desktop pc , and i got outlook empty , blank without any data ,,,, so i had them only on the mobile device , outlook gone , went away , installed new windows , new office , new pc ,,,,,,,
when first try on active sync , first try made a relationship between the desktop and mobile device ,,,, I DIDN'T CHECK ANY CONTACTS OR CALENDER OR APOINTMENTS WHEN RELATIONSHIP WIZARD WAS CREATING ,,,, after done " connected " all contacts has been gone , i think like the bro said up that the new outlook overwrite the device contacts with new list " wich is empty cz the outlook is blank " so got the device as blank contacts also .. thats the most currect answer ,,,
NOW GUYS I FOUD A SOLUATION , BUT NOT FOR ALL
cz i had stg file from my old pda2k device " imate " win2003SE , i did this :
1. found a friend who has the same device " imate - pda2k "
2. asked him to hard reset it without any personal data , and give it to me
3. i restored the full back up to the device and i got my contacts back as my old pda2k device
4. copied the contacts to my sim card , then put it in kaisaer and install them on the mobile normally ( could be also with any backup program or oulook if well configured )
5. done ...
sorry , mybe this solution would not affect other's problem in the same state ..
NOW PLEASE TELL ME WHAT TO DO : coz i have them normaly on the kaiser now , i am afraid to connect it to the desktop pc coz of the same problem ,,
FIRST : i want to make normal sync relationship with kaiser and pc , but first set must tell him to check the contacts or not ,,, i afraid to overwrite it or loose them again ( even the last time i am sure i didn't check the contacts to be syncED !!! )
i want to normal way to be without loosing the exesting contacts ,,
SECOND : how to make a full back up for this kaiser with active sync or other way , ( active sync when connect to kaiser doesn't show full/backup/resotre and i don't know why !!! ) , in case to restore it later if needed , give me good way plz
thank you so much guys , i don't wish this problem happen to anyone , you take care
waiting for ideas for the First and Second matters i talked about ...
cya

This noob needs help plz...

I installed Icone demarrer.cab to change my start icon which worked. But know I cant sync my phone to my computer at all. Any ideas???
I've installed the same cab and no problem. It has nothing to do with active sync. Now try to delete association and re establish association.

[Q] Galaxy Contacts Sync To Gmail Via Kies? need help

Hello Dear XDA Members,
I need some help with syncronizing my Phone Contacts To Gmail.
Im not a Newb User At Galaxy And Tried Many Methods.
First I Edited All of my contacts via Kies And Saved It On The Phone And On PC As *.scv File.
*When Im Importing The File to Gmail Most Contacts Are Shown On the phone without the phone number.
*Ive Tried To Create A New File Via Excel Using The Following Headliners:
First Name Last Name Phone Number 1 Mobile Number And nothing ive tried didnt work.
Contacts Are Agian Shown Without Numbers Or Numbers Show In "Notes" And Its Not Possible To Call.
*Ive Tried Also To Mark Only The "Phone Cotacts" And Export It To SD Card, But Its Making Me a File with 1453Contacts (I have only 180 On My Original List, Only 10% Of them has 2Numbers Or More.) (i have on my phone display total of 180contacts and my sim has 330contacts but its not marked.)
And Than When I Reload The File From SD Card To Gmail Trough The Phone, It Gives Me Many DOUBLES, Missing Numbers Etc...
Ive Been Tring To Do That All Day Long And Just Cant Find The Solution.
Can Anyone Help Me?! Please :]
Thank You Very Much Guys
Try this http://www.fjsoft.at/en/ (It's free) and use kies only for rom updating (only thing it can do properly )
Enjoy.
Even I am in need of managing my contacts & wondering what work flow should I adopt so all gets sync with phone & gmail., I tried MyPhoneExplorer its a good software I tried connecting my samsung galaxy I9003 but it doesn't work as yet with this new model, though it supports I9000.
Kies I find useless except the samsung official stuff updating,
sgsI9003 said:
...I tried connecting my samsung galaxy I9003 but it doesn't work as yet with this new model, though it supports I9000.
Click to expand...
Click to collapse
MyphoneExplorer should work with your I9003 too, try the uninstall/reinstall process.
ttf said:
MyphoneExplorer should work with your I9003 too, try the uninstall/reinstall process.
Click to expand...
Click to collapse
uninstall/reinstall the phone/modem driver or MyphoneExplorer?
I wish it connects with I9003, but it says "connection to phone could not be established, no device attached to usb".
I am connecting the phone to LCD monitor usb hub not to the rear usb ports, could that be an issue?
sgsI9003 said:
uninstall/reinstall the phone/modem driver or MyphoneExplorer?
I wish it connects with I9003, but it says "connection to phone could not be established, no device attached to usb".
I am connecting the phone to LCD monitor usb hub not to the rear usb ports, could that be an issue?
Click to expand...
Click to collapse
MyphoneExplorer of course ^^ (on your PC), check if the client part is installed on your SGS too.
About the Hub, yes it can be a problem.
check if the client part is installed on your SGS too
Click to expand...
Click to collapse
didn't understand this part, what does CLIENT mean?
sgsI9003 said:
didn't understand this part, what does CLIENT mean?
Click to expand...
Click to collapse
The software work as a client side (app on your sgs) / server side (app on your PC), in order to comunicate and synchronize, so when you install PhoneExplorer on your PC it install an APP on your SGS. Just uninstall/reinstall it on your PC and it'll push it automaticaly on your phone.
Oh I didn't connect the phone while I installed the MyPhoneExplorer that could be the reason.
Let me try this.
sgsI9003 said:
Oh I didn't connect the phone while I installed the MyPhoneExplorer that could be the reason.
Let me try this.
Click to expand...
Click to collapse
Make sure the debug mode is checked too (Settings -> applications -> devlopment -> USB Debuging)
Ok Thanks that finally solved the problem.
(it created few more problems while installing & showed a failed driver) but it took some time over 5-7 mins to initialize the modem & then showed it connected.
My phone explorer is great in terms of feature you can dial via computer receive calls via computer, send & receve sms via computer, edit/add contacts much better to do on computer than on small keyboard.
sgsI9003 said:
Ok Thanks that finally solved the problem.
(it created few more problems while installing & showed a failed driver) but it took some time over 5-7 mins to initialize the modem & then showed it connected.
My phone explorer is great in terms of feature you can dial via computer receive calls via computer, send & receve sms via computer, edit/add contacts much better to do on computer than on small keyboard.
Click to expand...
Click to collapse
Make sure kies is not running in background process and try it with the stock USB cable directly connected on the PC (maybe a hub issue).
Ok all problem solved now,
do I need to switch off debugg usb settings again when I need kies, its not connecting with kies now or is that background service of kies (which I killed) is mandatory to connect with kies?
sgsI9003 said:
Ok all problem solved now,
do I need to switch off debugg usb settings again when I need kies, its not connecting with kies now or is that background service of kies (which I killed) is mandatory to connect with kies?
Click to expand...
Click to collapse
Yes disable the "debug mode" when you need kies again.
contacts phone/gmail
Hi,
I'm new with smartphone. I gave a samsung I9000.
read all the above. thx for tip "my phone expl"
but I can't create a new contact on my phone directly on my Gmail ?
Now I tried pyphoneexplorer, and I don't find how do copy/replace a (newly created) contact to my gmail.
Can I get Help please ?
thanx,
B

[Q] Importing/Exporting contacts and Wifi problem

Hi,
today i've updated my FW from 2.2 I9000xxjp3 directly to 2.2.1 I9000xwjs8 (XXJQ1_NEEJS1). I used both one and three file method and under them both the problems exist.
After update i have no Export nor import contacts to/from internal SD options available. I had that option on previous FW. Now i have only option to copy or import them from SIM. Before update i copied all my contacts to vCard file. I do not have copy in gmail account because i didn't synchronized accounts before the update (no internet connection). So now i cannot put my contacts back to phonebook. Is this normal or it's something wrong with installed FW? Or maybe something is wrong with internal sd card after flashing? It's mounting when connected to PC, i can copy files to and from the SD so i think it's fine.
Also after the update my wifi started to act strange. Its connecting to router, signal icon is on the status bar. Then i can download data then it suddenly stops to download any data after a few seconds, then it starts to fuction properly again. It looks like its disconnecting all the time but the wifi icon doesn't dissapear, also the signal strenght is good.
On 2.2 wifi worked very good co can it be the new FW fault?
Any solutions? Suggestions?
I can try other FW's but i want to have newest firmware in my phone so please help with my problems.
Thanks in advance.

Categories

Resources