Database Develop

Radio v. 1.10.0

I have O2 XDA III (german), with radio rom v.1.10.0.
I've tried to find the way how to backup that rom and upload it to FTP. Can someone tell me how to do that. I've searched the wiki, but I didn't found the real solution.
Do I need to use XDArit or XDAtools? Can I do it under Win98, or I need WinXP/2000?
I have SD card and SD card reader.

I've described the process here:
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
You can do this under Win98.

mamaich said:
I've described the process here:
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
You can do this under Win98.
Click to expand...
Click to collapse
I've tried this and it doesn't work. When I press ok, I don't get terminal window. I've also tried this using COM2 (thats my modem) and it works fine, but with usb I don't get nothing

you should terminate Activesync before running MTTY. Kill processes wcescomm.exe and wcesmgr.exe with task manager and enter bootloader on your device (press and hold power+camera buttons and reset). The screen would write "serial ...", insert it into cradle, screen would write "USB ...". Run MTTY, select "usb" or "\\.\wcescom01" port and everything should work.
And don.t forget to do a backup, this will hard reset your device.

Thanks in advance for sharing your Radio! I've asked in any Forum, i know, but nobody seemed to cooperate. So it is great hearing somebody helps us.

mamaich said:
you should terminate Activesync before running MTTY. Kill processes wcescomm.exe and wcesmgr.exe with task manager and enter bootloader on your device (press and hold power+camera buttons and reset). The screen would write "serial ...", insert it into cradle, screen would write "USB ...". Run MTTY, select "usb" or "\\.\wcescom01" port and everything should work.
And don.t forget to do a backup, this will hard reset your device.
Click to expand...
Click to collapse
The problem was in win98, in WinXP everything worked fine. So, this stuff doesn't work with win98. When I backuped it, I couldn't transfer the backup on my computer (ntrw transfers 256Mbytes and says that something is wrong with the image). I think the problem is that I have MMC card, not SD card. I should get SD card today, and I hope that everything will work then.

Hope the upload will work, just put it in the root dir, as you can not put it in any of the folders.
Curious to see if this further improves GSM/GPRS etc...cheers!

Can't wait to hear the feedback on the 1.10 radio. I was going to go 1.08 but seems like a waste when this one is so close.

Ok, HappyGoat, do you have the path you saved too for this magic Radio?
1.08 is nice, works fine. Of course I must upgrade for no reason other than insanity, hence Im looking for the file.
Thanks
Rich

Is it also possible to extract the whole ROM from your device, so that I can update my SPV M2000 with your O2 ROM?

Any news about this new radio rom?

ringram said:
Ok, HappyGoat, do you have the path you saved too for this magic Radio?
1.08 is nice, works fine. Of course I must upgrade for no reason other than insanity, hence Im looking for the file.
Thanks
Rich
Click to expand...
Click to collapse
The Radio 1.08.00 is available again on the ftp server. Have a look in the BlueAngel folder, it's in there.
Any progress on getting the radio 1.10.00 version...?

I've borrowed SD card from a friend, and I have to bring it back until saturday. So, I need some quick answers.
It is 256Mbyte SD card. I've done the procedure of backup like instructed. You can see my log in attachment.
After that I put the card in Transcend 7 in 1 card reader. I've used ntrw to backup the SD on my computer, but something is wrong. It creates 256MByte file on my computer. The picture of console window is in attachment. I did like I was instructed, and i've also tried "d2s" (to backup only WinCE) and all combinations (only Radio Rom etc.), but the result is the same.
Any suggestions? I really need to do this quickly.

Try this command in DOS:
Code:
C:\ntrw read XDAIIs.nb1 i:
Just might work, not sure. In either case, thanks alot for trying and sharing this with us...

No ideas?

DreamerNS said:
I've borrowed SD card from a friend, and I have to bring it back until saturday. So, I need some quick answers.
It is 256Mbyte SD card. I've done the procedure of backup like instructed. You can see my log in attachment.
After that I put the card in Transcend 7 in 1 card reader. I've used ntrw to backup the SD on my computer, but something is wrong. It creates 256MByte file on my computer. The picture of console window is in attachment. I did like I was instructed, and i've also tried "d2s" (to backup only WinCE) and all combinations (only Radio Rom etc.), but the result is the same.
Any suggestions? I really need to do this quickly.
Click to expand...
Click to collapse
DreamerNS,
it is normal that you get a 256MB file, because your card has this kind of size!
The ntrw tool makes a full copy of your SD card it don't know how much data on your card is stored.
So make a full backup of your XDA, zip the 256MB file and upload the file to the ftp site.
Greetings
osch

DreamerNS said:
No ideas?
Click to expand...
Click to collapse
My suggestion did not work?

HappyGoat said:
DreamerNS said:
No ideas?
Click to expand...
Click to collapse
My suggestion did not work?
Click to expand...
Click to collapse
No. It is just filename, you can put anything you like there. it can be xdaIIs.nb1 or xdaIII.nb1 or IdontKnow.nb1 it doesnt change things, but thanks anyway.
It's too much for me to upload 256Mbytes. I have only dialup connection. Is there any way to extract radio rom from 256Mbyte file? If everything is allright, why is it says "ReadFile(): xdaIII.nb1 -- parameter is incorect"?

DreamerNS,
The unused bytes in the 256MB file will probably be zeros, and should compress to just a few kb.
Back in the days when mp3 FTP sites were all the rage (before P2P) I used to take advantage of highly compressable data like that. Sometimes you'd get a site where you'd have to upload a certain amount of MP3s before you could download. All you'd have to do is create a huge black .BMP file and rename it .mp3. Thanks to dial up modems automatic compression, you could upload a 10MB "mp3" in seconds! Hehehe
-no1

Going back to the problem, is I: the correct drive letter for your card reader's SD slot?
-no1

Blue Angel & Tuma 1.3

Hello!
First of all, I'm a newb
I've been using Tuma 1.3 for a while and suddenly, I got this message:
Storage memory is critically low. If you do not increase memory, you may not be able to start some programs. Use File Explorer to delete files you no longer need, or move some files to a storage card.
Click to expand...
Click to collapse
That been said I did not install new apps, copied new files, etc...
Still, I tried to search for any unusual bigger file but found nothing.
Tried a hard reset but it remained the same.
So my final approach would be upgrading to a new rom/downgrading to the latest official rom.
Guess what, since then I can't seem to connect to ActiveSync, Windows still recognizes the device, ActiveSync tries to connect to device but with no success.
I've read the hole wiki, and searched the forums but found nothing.
Is there a way to do some kind of full format? Or is there a way to upgrade the rom without ActiveSync?
Any advice?
Thanks in advance, best regards.
João 'tehCORE' Milheiriço

You can format the storage by using the hard reset method...
Power Button + Reset Pin
Before ROM didgits appear on screen hold down Camera + Record buttons until options appear on screen...
Use Record button to move to Format Storage option... Use Camera button to change to yes... (You should also format the Registry Hive to get all the way back to the base ROM state)
Press the Mail button to accept...
Your screen will turn white while the format takes place then you'll boot as normal...

dude...
i love you
thank you, it worked like a charm, i owe u one :wink:

Missing.dll file problem

I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?

Hi,
Try deleting the 'Internal Storage' folder using the file explorer and soft reset. 'Internal Storage 2' should be automatically renamed to 'Internal Storage'.
Hopefully this work for you.
DT

Did that. But still can not install any CABs...

Activesync mode
Check if your diamond is not connected as disk drive (normally when you connect it to your computer you have the choice to connect using activesync or disk drive). If you did connect using disk drive mode, you will not be able to install programs correctly. This is why it creates a 'internal storage 2' folder when installing programs.

I rearly use ActiveSync to install programs. I have them mostly as a CABs. So last advice does not fix the problem. Thank you though.

tarrytownfads said:
I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Click to expand...
Click to collapse
this internal storage 2 is because of messaging (attachments of email messages that are appointed to be stored in internal storage). when u want account to store messages to the internal storage some times it doesnot work in order to get this worked just go to MESSAGING and MENU >>>> OPTIONS >>>> and here u see all accounts and just at left side u see storage and there uncheck the item that says When available use this storage card to store attachements and then RESTART and the problem should now be solved.

Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?

tarrytownfads said:
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
Click to expand...
Click to collapse
FIRST install the sdkCERTF.cab see the attachment see if it works !!
which softwares are u installing again if u are installing them again maybe they were not deleted completely u can use taskmanager to terminate the process of that program and then reinstall. Use the Certf cab file and install it in your device may be this will help !!

Well, the whole point of my post is that it does not allow me to install ANY CAB file. I just tried it and copied both programs to the Diamond. After clicking on SDKCert.cab I've got the "Installation of SDKCerts.cab was unsuccessful" and with the TaskMgrv3.0 the message is "The file 'TaskMgr' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
What else could be done?

"digitally signed with a trusted certificate" issue
Guys, can anyone help here??? I can not believe that no one knows how to fix this...
If I were to flash my ROM to one of the newer ones from this forum, do you think it would fix the "digitally signed with a trusted certificate" issue?

Got the same issue with rom 1.37 :/
Any ideas since then ?

bringing this back to the top. I am trying to install an autorun that is designed to run from an SD card (not sure if this makes a difference or not) and when I do it says its not a trusted certificate and won't run. Have already installed the sdkcert.cab file and it states it installed correctly, but still the problem persists.

Fixed my install problem
I used Pocket Mechanic to fix registry issues and remove all trace of the program that first failed to install. All subsequent installs work fine.

Problems with .cab installation

Hi,
I bought a Diamond 2 weeks ago in French (v1.37.406.1 FRE) and I started to install .cab applications.
I tried to install :
S2U2 (1.05)
S2V
ESET NOD32 (on official site for PPC)
PHM
psshutxp
Advanced config (the link of XDA)
CorePlayer
none have been installed. The error message is :
The installation of "the_cab" has failed
Click to expand...
Click to collapse
So I do an Hard Reset and I was able to install :
S2U2 (but not the link of XDA)
S2V
PHM (not in the official website)
psshutxp
Advanced config (not the link of XDA)
but not CorePlayer and ESET
So I do an Hard Reset again but after nothing works
I do 2 Hard Reset again and I flashed my original french rom for the french rom in this topic : http://forum.xda-developers.com/showpost.php?p=2344831&postcount=42
the original.
And doesn't work
Where is the problem ?
Thx

nobody ??!?

You sure you have enough free memory to install those programs??.

I have same problem... have several programs that just dont get installed for unknown reason and it is even I chose flashcard also...

try updating ROMs, 1.37 is nutoriously slow anyway so that would definately help in terms of speed, and maybe its a bug on your ROM and you'll kill two birds with one stone, worth a try seeing as you've hard reset and lost your data anyway

I just uploaded all the apps using ActiveSync and it all works... Can someone explain why with USB drive it will copy but not work as it should?
Can we test it somehow?

Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.

buffystar said:
Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.
Click to expand...
Click to collapse
No no... sure I run CAB from the phone after I disconnected... I just upladed this via USB drive and it was making errors (just not working) but If I did same via ActiveSync it is working.
Can you explain this?

[Q] How to import a key to registry when WM does not start?

Is there a way to import *.reg file to the registry when WM does not start?
The problem is I have changed a key HKCU\ControlPanel\Sip\DefaultIm to change default keyboard and now WM doesn't load. It stucks before the green screen after initial Xperia animations. I guess either I've entered a bad CLSID or it tires to load keyboard before it mounts SD card.
Anyhow I have access to SD card contents only (via SDcard reader) and I would like to change the mentioned registry key contents. How to achieve this goal?
Thanks in advance.

Hm generally I'd like to mention: Don't install anything that autostarts on your storage card. To solve your problem: What about the active synch connection to your pc? Does it work? You could access your phones registry by using your pc.

ActiveSync of course do not work.

then hard reset phone .... or flash a new rom

Yep, I think this is the only solution for your problem.

guess it locks too early to do anything. with activesync would've been easier.
but you can try auto-install from sd-card:
- make a cab with your reg-settings
- make a dir called 2577 on your sd-card & put the cab in
- boot and see...
but i really think that directory is read at a later stage of boot-process.
so a hardreset should be your only option.

Hardreset to go to the original state of the last ROM flash, also of registry