Related
I have Tytn II with L26_Kaiser_Diamond_V5 (Hybrid 3.29.707) Rom.
Installed Calligrapher 8.6 and unable to select either writeanywhere or writepad from the SIP menu or by anyother means. In short after installing calligrapher and softresetting i am not able to use it.
Can anyone please help
Don't know if it will work or not but, you might try installing the Default_IM_WM5.cab or SipChange.cab and see if one of them will let you select it.
no success
^^ Solution -- not working
Assuming-
1. you installed with the desktop loader EXE
2. you had an active ActiveSync session and your phone was properly connected and
3. you selected to have both Write Anywhere and Write Pad SIPs selected when finalizing install to PPC
You should have entries for both in the SIP and a folder under programs with the EXEs. If you cannot find any of this you haven't properly installed the program.
Reconnect your phone and make sure you have an active Sync session, run the setup EXE from your desktop and follow the instructions that appear on your screen. (See pic)
Yes of course
The program was installed from the desktop pc and softreset was done. Both writeanywhere and writepads are installed and it is shown on the list of SIPs (when we click small arrow near the keyboard icon) but unable to select them. I am able to access the options menu of calligrapher from Start>settings>system>calligrapher.
ok now do this
http://forum.xda-developers.com/showthread.php?t=301433
Please see the image
boomermax
I had done that yesterday itself but the problem is menu showsup faster but unable to select writeanywhere or writepad.
so basically I've been no help at all...LOL
I'm sure you've uninstalled and reinstalled and have probably have redownloaded a fresh copy and tried installing that...
what happens when you select it from programs? Nothing?
Reinstalled
Reinstalled few times, when i select from programs nothing happens adn i don't know is it the problem of the L26 ROM or Windows 6.1 or the Calligrapher 8.6 --
if some one can help i will be grateful
Earlier also there was some problem without a solution for someone
http://forum.xda-developers.com/showthread.php?t=353077
try disabling the cube if you have it. I had this problem with transcriber, worked after I disabled the cube.
NO CUBE
I don't have cube but transcriber is working perfect only i have problem with calligrapher
still probably no help
have you tried having the installer remove transcriber from SIP during install?
Yes of course
Even without transcriber calligrapher will not work.
what if you tried this sequence and substituted calligrapher for the keyboard install?
http://forum.xda-developers.com/showpost.php?p=2271142&postcount=692
Phatware states calligrapher doesn't play well with third party apps that affect touch screen behavior and that is probably the problem here
not yet
^^ done without success
posted in another forum in reference to SIP troubles and Calligrapher...
"The main difference between CalliGrapher 8.6 and all previous versions is that it has been compiled with recently released Microsoft Visual Studio 2008. It is remotely possible that the new compiler has performance issues, but we have not heard anything about this and have not seen any evidence in our internal tests. The only difference that we’ve noticed when using the new development tool is that size of the compiled binary files slightly increased.
We will continue testing and will post additional information if we have any. "
Maybe trying previous version might help.
Also, taking the logic from this thread http://forum.xda-developers.com/showthread.php?t=398091 it might serve you to start from scratch and reload ROM then tackle this calligrapher issue then move on to loading other applications.
Partially success - Hard reset
I have done a hard reset.
installed first the calligrapher 8.6
soft reset
installed default_im_cab
changed sip through default_im_cab as writeanywhere
soft reset
Now writeanywhere is available and working in all applications except for Lexisgoo dictionary 3.1.1
Any help or suggesstions?
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
....thats what I get alot of the time trying to install things like mem maid and skype mobile. Does anyone have any ideas on this one, do I need to unlock something to install as I don't see anyone else on the forum with the same prob. I have the T-mobile MDA if thats relevant.
Cheers.
Most probably you can't run unsigned apps.
Change the xxx101a key to dword 00000001 in security policies in the registry.
Did you download SkypeForPocketPC.exe or SkypeForPocketPC.cab ? I accidentally downloaded SkypeForPocketPC.exe the other day and got the same message. Download the .cab file instead. It's located on the same page. It says something like "For advanced users, download <link>.".
yes .exe installs for pocketpc are always ment to be run from the pc which then
use activesync to copy the cab to the phone and run it
Rudegar said:
yes .exe installs for pocketpc are always ment to be run from the pc which then
use activesync to copy the cab to the phone and run it
Click to expand...
Click to collapse
... or download it through opera if you have free 3G or WiFi.
thanks guys will give that a try, bloody love this fone
[SOLVED!! look at the end of the thread]
hello,
i'm in real trouble.
the beginning of my trouble was:
i updated my kaiser with the new vodafone 6.1 rom.
from this point, i can't sync anymore...
i tried really everything what was suggested in google/forums and the forum here.
- hard-reset
- deleted reg-keys (partnership)
- uninstalled WMDC and installed real fresh
- rolled back to VPA Rom 6.0 and back to 6.1 because of the same problem
- tried every settings (advanced network mode)
- disabled firewalls
- .. and so on...
can't get rid of this f*** problem...!
any ideas?? i'll make a donation for the guy who can solve my problem without doing a fresh vista installation!
--> domain network! but there isn't any difference while syncing?
--> i can copy data to my VPA and reverse, explorer mode works fine!
--> Windows Vista x64 Ultimate
please can you help me?!
sorry for my bad english!
eventlog is showing:
- System
- Provider
[ Name] RapiMgr
- EventID 8
[ Qualifiers] 49152
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-09-27T08:39:17.000Z
EventRecordID 32699
Channel Application
Computer E6850-Core2Duo.xxxxx.xxxxx.de
Security
- EventData
communication (0x80072745)
at the wmdc.log file:
wmdc Error: 6 : [null] Caught exception: System.Runtime.InteropServices.COMException (0x80004005): Beim Aufruf einer COM-Komponente wurde ein HRESULT E_FAIL-Fehler zurückgegeben.
bei Microsoft.WindowsMobile.IActiveSyncEngine.GetDataTypeArray(String partnerID)
bei Microsoft.WindowsMobile.DeviceManager.ActiveSyncEngine.<LoadDataTypeList>b__5()
DateTime=2008-10-21T12:08:58.8656855Z
wmdc Verbose: 0 : NewPartnershipWizard ended becuse of an exception
garfield2412 said:
hello,
i'm in real trouble.
the beginning of my trouble was:
i updated my kaiser with the new vodafone 6.1 rom.
from this point, i can't sync anymore...
i tried really everything what was suggested in google/forums and the forum here.
- hard-reset
- deleted reg-keys (partnership)
- uninstalled WMDC and installed real fresh
- rolled back to VPA Rom 6.0 and back to 6.1 because of the same problem
- tried every settings (advanced network mode)
- disabled firewalls
- .. and so on...
can't get rid of this f*** problem...!
any ideas?? i'll make a donation for the guy who can solve my problem without doing a fresh vista installation!
--> domain network! but there isn't any difference while syncing?
--> i can copy data to my VPA and reverse, explorer mode works fine!
--> Windows Vista x64 Ultimate
please can you help me?!
sorry for my bad english!
eventlog is showing:
- System
- Provider
[ Name] RapiMgr
- EventID 8
[ Qualifiers] 49152
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2008-09-27T08:39:17.000Z
EventRecordID 32699
Channel Application
Computer E6850-Core2Duo.xxxxx.xxxxx.de
Security
- EventData
communication (0x80072745)
at the wmdc.log file:
wmdc Error: 6 : [null] Caught exception: System.Runtime.InteropServices.COMException (0x80004005): Beim Aufruf einer COM-Komponente wurde ein HRESULT E_FAIL-Fehler zurückgegeben.
bei Microsoft.WindowsMobile.IActiveSyncEngine.GetDataTypeArray(String partnerID)
bei Microsoft.WindowsMobile.DeviceManager.ActiveSyncEngine.<LoadDataTypeList>b__5()
DateTime=2008-10-21T12:08:58.8656855Z
wmdc Verbose: 0 : NewPartnershipWizard ended becuse of an exception
Click to expand...
Click to collapse
Which operating system are you trying to sync with?
First thing you can try is to go start, settings, connections, usb to pc and then untick "enable advanced network functionality"
let me know if that works or not I will give you something else to try.
1.Why don't you try another rom eg a hyperdragon's one.
2.Have you tried more than one pcs to synchronise with? Maybe you have problems with your pcs operating system
If still a problem might be a defective usb port.
Does WMDC even acknowledge your Kaiser?
Launch WMDC from the Control Panel, and then then connect your phone. Do you see "Connecting" pop up for even a second before switching back to "Not Connected"?
If nothing else has worked so far try this:
Go to Device Manager, delete the "Portable Device" keys, then go to c:\windows\inf folder (Make sure you can view hidden folders). Next, find the oemxx files until you find the one that has "Windows Mobile Smartphone" in it. These are numbered sequentially for each device you add, so you'll have to do a bit of digging before you find the right one. Once you find it, delete it and the corresponding .pnf file. Once you've done this, reboot your computer and reconnect your device and it should reinstall. Be sure to make copies of the files just in case you delete the wrong ones.
thank you very much for answering so fast!
answers to your questions:
-Which operating system are you trying to sync with?
--> Vista x64 Ultimate
- First thing you can try is to go start, settings, connections, usb to pc and then untick "enable advanced network functionality"
--> tried a couple of times ticked and unticked --> only gives back different rapimgr fault codes, but still no sync
defective UDB --> trided different cables and ports
connection to kaiser works very well (without sync)!
--> can see my kaiser in explorer an can copy files!
only syncing does not work :-(
mskip said:
If nothing else has worked so far try this:
Go to Device Manager, delete the "Portable Device" keys, then go to c:\windows\inf folder (Make sure you can view hidden folders). Next, find the oemxx files until you find the one that has "Windows Mobile Smartphone" in it. These are numbered sequentially for each device you add, so you'll have to do a bit of digging before you find the right one. Once you find it, delete it and the corresponding .pnf file. Once you've done this, reboot your computer and reconnect your device and it should reinstall. Be sure to make copies of the files just in case you delete the wrong ones.
Click to expand...
Click to collapse
tried to change drivers in device manager about 3 days ago.
i have
HTC USB Sync
version 6.0.6001.18000 21.06.2006 and
version 6.1.6965.0 31.05.2007
tried to change this in device manager but both drivers won't sync.
but both drivers connect very well!
registry needed
can anybody post his regystry-keys for:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
??
thank you!
maybe there is a bug in my machine!
idea. these keys are empty at my machine!
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\CEDevice]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\CEDevice\Services]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\CEDevice\Services\Synchronization]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\CEDevice\Services\Synchronization\Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\CEDevice\Services\Synchronization\Objects\File]
"Settings"="MS.WinCE.CEFStore.InplaceUI"
@="CEFStore Data Object"
Do you have HardSPL installed on your phone so you can try flashing a non stock rom? Alot of the sync problems on stock roms are fixed by the chefs when they cook their own roms. Look at the links in my sig for some threads to look at.
mskip said:
Do you have HardSPL installed on your phone so you can try flashing a non stock rom? Alot of the sync problems on stock roms are fixed by the chefs when they cook their own roms. Look at the links in my sig for some threads to look at.
Click to expand...
Click to collapse
i thought about it...
but worrying about: why does WM 6.0 and WM 6.1 rom work anymore?
flashed back to WM 6.0 (asked vodafone for it!!) and the problem is there anymore?
i've read a litte bit about hardspl and flashing...
is it very difficult?
Guten Aben!
Any chance you can redo your Vodaphone update from a good XP machine? Sometimes it works when Vista doesn't.
It only needs to download Activesync from Microsoft's website if it doesn't have it already.
This happened to me a long time ago, it turned out that rebooting Windows PC after changing the network settings worked, just like in the old Win98 days. I am referring to the Activesync network setting.
For some reason the realtime registry edits for networking wasn't so realtime!
Good luck friend!
joihan777 said:
Guten Aben!
Any chance you can redo your Vodaphone update from a good XP machine? Sometimes it works when Vista doesn't.
It only needs to download Activesync from Microsoft's website if it doesn't have it already.
This happened to me a long time ago, it turned out that rebooting Windows PC after changing the network settings worked, just like in the old Win98 days. I am referring to the Activesync network setting.
For some reason the realtime registry edits for networking wasn't so realtime!
Good luck friend!
Click to expand...
Click to collapse
trying that tomorow..
my brother has an XP and Vista machine..
also thinking about checking his and mine HLKM\Windows CE keys...
garfield2412 said:
i thought about it...
but worrying about: why does WM 6.0 and WM 6.1 rom work anymore?
flashed back to WM 6.0 (asked vodafone for it!!) and the problem is there anymore?
i've read a litte bit about hardspl and flashing...
is it very difficult?
Click to expand...
Click to collapse
No its not difficult at all.
Read this guide I made for Flashing your First Rom its helped alot of people out and the steps are easy to follow
The guide has steps for flashing from MicroSD Card too if you dont trust Vista.
Try this. I ran into issues syncing with my Vista Ultimate x64 machine when running a particular cooked ROM, and this CAB fixed it for me.
I hate to ask such a mundane question, but you are running in administer mode with full access, right?
You can also check out this site http://www.pocketpcfaq.com/faqs/wmdc/connectoverview.htm
SOLVED!
hy,
okay, first of all i have to thank everybody who wanted to help me!
but all things you suggested to me: i tried i weeks before i opend this thread.
i wasn't able to solve my problem --> donation aquired...
but i figured it out on my own (now, months later, one day later i opened this therad ).
but i think the soloution can help many users who whave sync problems ant the rapimgr 0x00... problem!
remembered that i had sync problems years ago under XP with an PPC2002 machine when copyied the sync.-profile from one machine to the other.
i remembered the HLKM\Windows CE reg keys!
i asked my brother for his HLKM\Windows CE reg keys! (you remember i asked in this thread also)!
checked the keys with mine and figured out, that my keys where completely different and many keys are missing!
i exported my reg keys and deleted them in the registry. (HLKM\...\Windows CE (look in ahead and you know whitch keys i'm meaning)) --> backup
then i imported the reg HLKM\Windows CE keys from my brother !
conected my VPA and TADAAAAAAA, working!!!!!!!!!!!!!!!!!!
i think this can be another soloution for all guys who have problems with sync and an reinstall of WMDC dosn't do the trick!
wondering why an reinstallation of WMDC doesn't create the HLKM\Windows CE keys correctly???
thanks a lot for your ideas, even when they didn't help.
Glad you fixed it, if you can provide me with more details of the keys and values you changed i can test it out and make a cab to possibly help other people in the future
mskip said:
Glad you fixed it, if you can provide me with more details of the keys and values you changed i can test it out and make a cab to possibly help other people in the future
Click to expand...
Click to collapse
okay, i'll zip two .reg files (PC-Side). my "not working reg" and "working reg keys" from my brother that i imported.
i think WMDC is calling some dlls. when they aren't in the registry WMDC gives you a strange answer back...
still the question: why does a reinstallation of WMDC do not create these keys?
maybe these parts are interesting:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\PocketPC\Services\Synchronization]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\PocketPC\Services\Synchronization\Objects]
okay, here they are:
garfield2412 said:
okay, i'll zip two .reg files (PC-Side). my "not working reg" and "working reg keys" from my brother that i imported.
i think WMDC is calling some dlls. when they aren't in the registry WMDC gives you a strange answer back...
still the question: why does a reinstallation of WMDC do not create these keys?
maybe these parts are interesting:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\PocketPC\Services\Synchronization]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\SpecialDefaults\PocketPC\Services\Synchronization\Objects]
okay, here they are:
Click to expand...
Click to collapse
thanks i will have a look at them tonight
i am having the same problem except with windows XP and active sync 4.5
the odd thing is that it worked fine a month ago. i havent changed my ROM, installed/uninstalled anything on my phone. my computer, is a different story, i did install office 2007. i hadnt synced my phone for a month, so i decided it was about time. i connect via USB, and i get nothing. not even a little sound saying a device was connected. the phone charges but thats about it.
i have tried, muliple computers, multiple USB ports, multiple wires. I did a hard reset. And i finally tried the registry keys on this thread. still doesnt work. any ideas?
**i have also check/unchecked the "enable advanced network functionality" box
Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.
Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.
I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.
Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.
Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.
help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse
All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!
All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John
Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee