Related
Hi,
Can anybody please help me with this proble,
I am freaking.
I bought the phone SX 66 (Cingular) a week back and thought will download some cool things in the weekend.
I thought of upgrading the Rom.
The sequnce was confusing.
So I downloaded BAUpgradeUt file , EntelBL, GetDeviceDte, HTCRUU.DLLHTCRUU.cnf and xda3nbftool files on to a temp folder.
I guess I executed the BAUpgradeUt file (with Activesync on) and the phone was on the cradle connected to my laptop.
It restarted and went to a mode where the screen started showing USB v2.07
I removed the battery and tried restarting by pressing the power button, it showed serial V2.07 (as it was not connected to the cradle)
I waited for the battery to dry down but nothing is happening.
Now when i connect it back to cradle, it says USB V2.07
I am really worried.
Its a little difficult to understand fro the XDA forums, so can anyone help me step by step on how to fix this.
I mean which file do i need to execute.
Should i disconnect anything?
Pls explain in detail as i will miss out again and dont want to loose this.
I have unlocked this successfully erlier
Awaiting the earliest reverts
Thanks
Abhi
[email protected]
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into the cradle
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Hi Midget, Thank you for the patience and being there.
I am sorry but I am still stuck with this.
Like mentioned by you,
1. downloaded mtty1.42.rar onto a temp fold on my laptop
2. Stopped wcescomm.exe from taskbar(the rapimgr was not running so dint get it)
3. Device was put into cradle (was saying USB v 2.07)
4. I executed the mtty1.42 extracted file(application)
("This is where I got stuck")
I got
open port setting popup
a. Asked me for Port (options were COM1,2,3 and USB)
I selected USB
b. Asked me for Baud:
I selected 115200
c. Databits = 8bits
d. Stopbits = 0bits
e. Localecho=No
f. Flow Control=None
e.Parity=None
When I say Ok, It opens me a window of Multi Port TTY Version 1.42 and within that there is another window that is opened that says
USB115200 N-8-1 and its a blank notepad kind of a file
(Do I need to type in anything into this and save and and download?)
5. U have instructed me to
a. Choose WCEUSBSH001 (where do i choose this from?)
b type "set 14 0" without the quotes to tell bootloader to boot the OS after reset. (where do I do this)
c. type "task 28" to get your device formatted (where)
d. type "task 0" to ask your device reboot (where)
6. take the device out of the cradle, and manually reset it if it does not do that already(I was not able to reach this stage).
Please take a little time in guiding me and sorry if I have been troubling you with basic questions and I m very worried and want to fix this sooner.
Also is it required for the phone to be charged suring this process and is it mandatory that I should ensure that it reads USB v2.07 while it is on the cradle?
Awaiting ur instructions and Thanks again s much
Abhi
Midget_1990 said:
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into the cradle
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Click to expand...
Click to collapse
everything is fine, just type what i said into the 'notepad' window, pressing eneter after each line and removing the quotes, then remove from cradle and hard reset your phone
Hi,
I am very sorry, but I need help.
I am unable to fix this.
I am trying my best to follow the instructions and dont know where am i going wrong.
Like U said,
I went again with the Multi Port TTY utility and in the new USB text file window, ((stopped the wcescomm.exe application from taskbar)
I tried entering
set 14 0
USB>task 28
USB>task 0
USB>
Saved the file as USB
The phone in the cradle was still showing USB v2.07
I took the phone out of the cradle, removed the battery and inserted it back into the cradle
and i again starts showing USB v2.07
Where am i going wrong..
I also tried
USB>set 14 0
USB>task 28
USB>task 0
USB>
but in vain...
Please help in resolving this
Thanks
Abhi
Midget_1990 said:
everything is fine, just type what i said into the 'notepad' window, pressing eneter after each line and removing the quotes, then remove from cradle and hard reset your phone
Click to expand...
Click to collapse
I got same problem couple of days ago.
i tried this way, and it works for my PDA. but the only thing is my siemens sx66 bluetooth does not work any more, and tell me the license is expired. anyone knows the reason? i think the exrom wrong.
thanks.
andy xia
Midget_1990 said:
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into the cradle
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Click to expand...
Click to collapse
I ****ed my BA like this guy and found this solution via google.
It worked perfectly. God bless you sir.
Stuck in Serial
The BA that I have killed is stuck in "Serial, v2.07". Placing it in a USB cradle does nothing. I have tried to connect using a cable I purchased, but I think I need a straight thru cable and I only have a null modem.
I want to verify that I should be able to connect via serial and do the same process?
Thanks.
padapa
i had ewhat a similar issue, my problem was caused by windows vista....not sure if thats what your issue is, but if you are running vista try this...
http://forum.xda-developers.com/showthread.php?t=291723
still in stuck serial
After a long break, I'm back to trying to recover this BA that is stuck in bootloader. I've read wiki's and forum posts till I'm blue in the face. I have two BAs, one with WM2003 and the "stuck one".
If I put the good BA into the cradle, it starts Activesync and the USB driver and I can connect via mtty and see the good BA, the "stuck one" does not start anything.
If I plug in my serial cable and put in the good BA, I see the "CLIENT" message. When I put in the "stuck one", I see nothing and typing the codes does nothting.
Any ideas would be greatfully appreciated.
Padapa
check the bottom PC IO/Connector of the BA physically for broken "pins"
Midget_1990 said:
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into the cradle
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Click to expand...
Click to collapse
Not working bro :S
had the same prob here.
im back after a break. i gave up.
i think what i did wrong was using the usb hub. and since you had the issues w the cable... maybe....
im still looking for an answer.
lets see if we can make it.
follow the instructions as they may help.
these brains are good.
i posted this thread but im sure you already know.
http://forum.xda-developers.com/showthread.php?t=346510
Hello!
Where I can download mtty for Trinity?
http://wiki.xda-developers.com/uploads/mtty.exe not working!!!!
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
I have SPL-1.01 MFG, but......
USB> task 32
Level = 0
Cmd>lnb C:\finalsplash.nb 500e0000
:F=C:\finalsplash.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
Click to expand...
Click to collapse
On this step, process stoped
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
you have to use mtty 1.16 for the lnb command to work.
Take it from here:
ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
pof said:
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
Click to expand...
Click to collapse
Say me, please ROM adress for Trinity!
Sorry, my English very bad....
lvsw said:
Say me, please ROM adress for Trinity!
Click to expand...
Click to collapse
sorry I don't have a Trinity and I don't know what is the ROM layout on it, you can investigate yourself capturing the output of the RUU while flashing a rom with usb monitor, dumping rom parts with rbmc bootloader command, and dumping mmu and parts of mem from gnuharet... but it's a long process until you manage to get all the addresses correctly. You have to compare what you get from the device with the *.nb file extracted from the NBH to see where each part of the ROM starts. Can't really do this without having a Trinity on my hands
Problem using mtty
I have some ploblems using mtty.... I deselect "connect to USB" in pc activesync, then I connect the pocket pc on the usb cable, then I start mtty and I select USB.... I have a the mtty window in which is written CLIENT then, again, CLIENT, and the pocket pc... CONNECTING TO USB... and this situation remain without any changement.... where I am wrong?
pof said:
you have to use mtty 1.16 for the lnb command to work.
Click to expand...
Click to collapse
Actually, the LNB command must be implemented in the bootloader to work. If you connect to Trinity using any version of MTTY (from 1.10 to 1.46) and type LNB, it will just give an "Command error!!!" message.
yes, but seems to be implemented on the MFG bootloader version that is left on the device after unlocking it with imei-check unlocker, isn't it?
can't get MTTY to connect w/ Trinity
dr-jo said:
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
Click to expand...
Click to collapse
Not that I think it should matter much but in case it does I'll say first that I'm running a PC w/ Vista and not xp or earlier.
Anyway, I can't get MTTY to connect to my Trinity.
The only port that MTTY can open is my Com3. All other ports, inluding the one titled "USB" can not open.
When I have MTTY open on Com3, there is no response to any command so I suspect although the application is occupying the port, it is not communicating w/ the Trinity.
Can anyone provide some insight here or tell me the correct com port settings (parity, baud, stopbits, etc)?
Thanks,
J
I tried MTTY on my WinXP notebook as well. I get the same situation. I downloaded a freeware terminal emulator application also but wasn't able to establish coms w/ the Trinity either.
Can someone confirm their com settings in MTTY?
The same thing has happened to me on p3400i, the New Gene, followed the guide at XDA to every letter, though I knew my device was a new Gene. Now the mtty program opens with some settings window instead of the USB button. Only port accessible is COM3. Flashed and bricked by Olipro SPL.
hp in 6515 had the bootloader mode and not getting to leave here until he managed to resurrect but I lack the file and radio Radio OS file system, then I tried to update the Rom poking the same as had, to see if the 1.29 asi I take what I needed, but when I put in to upgrade the 0.1% and disconnects the ActiveSync, returns to 0.0% and a ratito I get error 606: limited time spent in communication with the bootloader usb, I have tried a lot of times and always with equal and different versions of ActiveSync.
If someone can give me a solution or at least as I can tell you put your radio and radio file system.
There be any other program other than the Pda ActiveSync to communicate with your computer?
ricar said:
hp in 6515 had the bootloader mode and not getting to leave here until he managed to resurrect but I lack the file and radio Radio OS file system, then I tried to update the Rom poking the same as had, to see if the 1.29 asi I take what I needed, but when I put in to upgrade the 0.1% and disconnects the ActiveSync, returns to 0.0% and a ratito I get error 606: limited time spent in communication with the bootloader usb, I have tried a lot of times and always with equal and different versions of ActiveSync.
If someone can give me a solution or at least as I can tell you put your radio and radio file system.
There be any other program other than the Pda ActiveSync to communicate with your computer?
Click to expand...
Click to collapse
one solution is also posted in this forum here i'm just copying and pasting for you because that is posted for another model but i confirm i checked it with HP iPAQ in boot loader by formatting it after flashing bad ROM or any communcation error.
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
Take Care
ENJOY
but not so you retrieve the radio os and radio system file
solution works on a 6515d with BL screen
I install hard spl 1.3 then try to reset my htc p3600 trinity with this command in mtty bat not work , i try this and work in hermes and kaiser bat in trinity not. So can somebody helo me to reset call duration in trinity please and write how and what need to do.
this command in mtty and hard spl1.3 not work i try this:
1) put device in bootloader mode
2) disable activesync usb connections
3) connect to bootloader using mtty.exe
4) when you see "USB>" prompt type this (DO NOT COPY-PASTE):
rtask b
0 <--- wait until you see a "0" here
ate1 <--- enable local echo
atv1 <--- verbose output for return values
[email protected]?1 <--- get outgoing call time
[email protected]?0 <--- get incoming call time
[email protected]=270F,270F reset both counters BAT RECEIVED ERROR??
In hermes 100% work with hard spl1.2 and in kaiser when security unlock also work bat why this not work in TRINITY . Is any solution that can help me to reset call duration .plaase do not sent message that hard reset will remove call duration .!!! this also not work As i can see i need special bootloader i mean hard spl that this command work..So who can help???
try with hard spl1.2
try with hard spl1.2 - radio upgrade will also not work with hard spl1.3 on the trinity -
Carlo626 said:
try with hard spl1.2 - radio upgrade will also not work with hard spl1.3 on the trinity -
Click to expand...
Click to collapse
With hard spl 1.2 command rtask b in mtty not work ,so plase only write if you try and know that work.
i tried without success.maybe no way to reset it until now
Finaly work after use trinity unlocker and hard spl 1.3
Cmd>rtask 4
Cmd>rtask 7
Enter Radio Image
AT-Command Interpreter ready
0
atv1
OK
[email protected]?1
@TALK: 00003B3F
OK
[email protected]?0
@TALK: 00005176
OK
[email protected]=270F,270F
OK
i've got a qtek 2020i
but something went wrong with an upgrade downloaded from qtek netherlands.
now i can't turn it on it doesn't work anymore
in teh screen i can read
serial
v1.01
or when in the cradle usb
plz help out here i can't fint it with active sync.
inreally need the damn thing. it's like losing my right hand
it came with winmobile 2003 ce
maybe i need a more resent version.
I am not an expert by any means but the fact that it switches to USB when cradled means it should be reflashable with a new ROM, search the o2.ie site for their most recent ROM. Not saying their offering is the most recent but it should get you going again
i searched but i can't find anything.
i don't know were i can find it
and if i do how does it work?
my telephone is using Orange / T mobile
Ok I had the same problem recently and managed to fix it using mtty.exe, and a working flash file.
The procedure goes like this:
Get mtty.exe, ( I found a copy on a file sharing site using google ).
Open Activesync and disable the USB option in connection settings, you'll need the usb port for mtty.
Put the device in the cradle, and check that it says USB , (it may say serial 1.01 at this point, don't worry, this happened on mine).
Run mtty.exe, and select USB, this will open a terminal window allowing you to communicate with the device. If you don't see USB as an option then exit mtty and try plugging the USB cable into another port.
Once you have the terminal window open, type task 28 and press enter, this will format the DiskOnChip.
Once this is complete and there are no errors, exit mtty, and run the upgrade, this should hopeully restore your Alpine.