i've got a qtek 2020i
but something went wrong with an upgrade downloaded from qtek netherlands.
now i can't turn it on it doesn't work anymore
in teh screen i can read
serial
v1.01
or when in the cradle usb
plz help out here i can't fint it with active sync.
inreally need the damn thing. it's like losing my right hand
it came with winmobile 2003 ce
maybe i need a more resent version.
I am not an expert by any means but the fact that it switches to USB when cradled means it should be reflashable with a new ROM, search the o2.ie site for their most recent ROM. Not saying their offering is the most recent but it should get you going again
i searched but i can't find anything.
i don't know were i can find it
and if i do how does it work?
my telephone is using Orange / T mobile
Ok I had the same problem recently and managed to fix it using mtty.exe, and a working flash file.
The procedure goes like this:
Get mtty.exe, ( I found a copy on a file sharing site using google ).
Open Activesync and disable the USB option in connection settings, you'll need the usb port for mtty.
Put the device in the cradle, and check that it says USB , (it may say serial 1.01 at this point, don't worry, this happened on mine).
Run mtty.exe, and select USB, this will open a terminal window allowing you to communicate with the device. If you don't see USB as an option then exit mtty and try plugging the USB cable into another port.
Once you have the terminal window open, type task 28 and press enter, this will format the DiskOnChip.
Once this is complete and there are no errors, exit mtty, and run the upgrade, this should hopeully restore your Alpine.
Related
Hi,
Please help. I was trying to upgrade to WM5 (http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade). I'm currently at step #10 but it seemed to have frozed. I left it up overnight and nothing occured. My PDA2k is now "dead." I tried soft and hard reset, removed it from the cradle. I tried all options listed below...still no luck.
****************************
If nothing has changed or happened in about 10 minutes, try this:
1. Make sure your device or cradle is connected directly to your computer (so no hubs!)
2. Disconnect the device from the PC, or remove from cradle
3. Perform a "hard reset" on the device (screen will flicker but nothing will change)
4. Kill the BaUpgradeUt.exe program on your PC by using Window's Task Manager (CRTL+ALT+DEL)
5. Kill the wcesscom.exe program on your PC by using Window's Task Manager (this is the ActiveSync application)
6. Place the device back in it's cradle
7. Restart the upgrade program from your PC (double-click BaUpgradeUt.exe)
****************************
Please let me know what else can I do?
Thanks in advance.
I'm answering my own question.
I re-loaded the old rom from www.imate.com. Took an hour rest, re-installed ActiveSync 3.7, works perfectly (WM2003).
I figured it out!
I went to a blank computer and installed the T-Mobile Apps from scratch then the first thing I did after the reboot from the ActiveSync install...was rand the ROM upgrader (CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe)
....PRESTO.....
What I saw was the driver used when the phone goes into the Boot Loader screen (RED, GREEN, BLUE). It stated "USB Device" as the driver was loading in Windows XP...after it stated device ready to be used....it started!
I would suggest unistalling ActiveSync and reinstalling it from the T-Mobile Disc....this should work!
PM me if you have any problems.
Hi, I had this same problem after a bad flash. couldn't get ActiveSync to connect, Thought phone was F***ed, Got it going again tho
What I did was search the forun for file mtty
1) download and run. Must turn off A/S connect via usb first
2) When mtty rund it asks for a port. Select usb
3) Click ok, press enter on next screen then type "SET 14 0" press enter
4) Close this program and re enable A/S connect via usb
5) Re Flash with Rom File and it all went ok for me.
Note all my phone would do when Reset (Hard or Soft) was give the three colour screen
Hello!
Where I can download mtty for Trinity?
http://wiki.xda-developers.com/uploads/mtty.exe not working!!!!
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
I have SPL-1.01 MFG, but......
USB> task 32
Level = 0
Cmd>lnb C:\finalsplash.nb 500e0000
:F=C:\finalsplash.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
Click to expand...
Click to collapse
On this step, process stoped
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
you have to use mtty 1.16 for the lnb command to work.
Take it from here:
ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
pof said:
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
Click to expand...
Click to collapse
Say me, please ROM adress for Trinity!
Sorry, my English very bad....
lvsw said:
Say me, please ROM adress for Trinity!
Click to expand...
Click to collapse
sorry I don't have a Trinity and I don't know what is the ROM layout on it, you can investigate yourself capturing the output of the RUU while flashing a rom with usb monitor, dumping rom parts with rbmc bootloader command, and dumping mmu and parts of mem from gnuharet... but it's a long process until you manage to get all the addresses correctly. You have to compare what you get from the device with the *.nb file extracted from the NBH to see where each part of the ROM starts. Can't really do this without having a Trinity on my hands
Problem using mtty
I have some ploblems using mtty.... I deselect "connect to USB" in pc activesync, then I connect the pocket pc on the usb cable, then I start mtty and I select USB.... I have a the mtty window in which is written CLIENT then, again, CLIENT, and the pocket pc... CONNECTING TO USB... and this situation remain without any changement.... where I am wrong?
pof said:
you have to use mtty 1.16 for the lnb command to work.
Click to expand...
Click to collapse
Actually, the LNB command must be implemented in the bootloader to work. If you connect to Trinity using any version of MTTY (from 1.10 to 1.46) and type LNB, it will just give an "Command error!!!" message.
yes, but seems to be implemented on the MFG bootloader version that is left on the device after unlocking it with imei-check unlocker, isn't it?
can't get MTTY to connect w/ Trinity
dr-jo said:
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
Click to expand...
Click to collapse
Not that I think it should matter much but in case it does I'll say first that I'm running a PC w/ Vista and not xp or earlier.
Anyway, I can't get MTTY to connect to my Trinity.
The only port that MTTY can open is my Com3. All other ports, inluding the one titled "USB" can not open.
When I have MTTY open on Com3, there is no response to any command so I suspect although the application is occupying the port, it is not communicating w/ the Trinity.
Can anyone provide some insight here or tell me the correct com port settings (parity, baud, stopbits, etc)?
Thanks,
J
I tried MTTY on my WinXP notebook as well. I get the same situation. I downloaded a freeware terminal emulator application also but wasn't able to establish coms w/ the Trinity either.
Can someone confirm their com settings in MTTY?
The same thing has happened to me on p3400i, the New Gene, followed the guide at XDA to every letter, though I knew my device was a new Gene. Now the mtty program opens with some settings window instead of the USB button. Only port accessible is COM3. Flashed and bricked by Olipro SPL.
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
i've made the same wrong thing like you ... 5 days to find it out.
1. dont have a rom on your storagecard (well not in the root)
2. put the hardspl.exe on the desktop of your pc (also dont have a rom on the desktop)
3. start the hardspl.exe on the desktop with the usb pluged in.
and it will work and you will feel like me "like a dump noob".
SO YES - YOU HAVE TO START THE X1_HARDSPL.EXE FROM YOUR BLOODY PC, LAPTOP, ETC AND NOT FROM YOUR X1
Bennieficial said:
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
Click to expand...
Click to collapse
I had the exact same problem.
You need to:
Disable your internet connection(wifi/lan)
disable your virus detection and windows firewall (and any standalone fire wall you have)
Remove you MicroSD card
run hardspl (it should now complete the operation)
And flash to what ever rom you like (using the SD card method)
Re-enable your firewall/virus detection/internet connection (In that order)
thanks!! i got it working just fine now thanks to both of you guy's help!
ok one more problem. I am not able to get my X1 synced with WMDC anymore, just as it was doing before my failed attempts at Hard-SPLing my phone. How do I fix this?
ok do you have now the hardspl on the phone?
IF yes - it will sync.
1. dont connect the phone
2. delete the "Partnerschaft" in english perhaps the team in WMC (means delete the phone in MWC).
3. connect the phone it will say a "oh new phone" - give him the sync possibilities and it's done.
took a bit time the first time...................just checked it right.........hm got also problems.....yesterday it worked because he copied the changes ........but today!
Hi
I have tried the dummies guide concerning updating the HTC USB drivers but had a couple of issues:
1. If I press F8 during the boot process I get an abreviated version of the bois setup which has no selection for turning off digital signing of drivers. I have an ASUS motherboard so to enter the bois I press the DEL key. Whilst in the bios I can see no option for turning off the digital signing. The instructions in the thread simply don't work.
I have done some searching and found web pages that explain how to enter the command window, paste 2 or 3 lines of text to turn off digital signing and put W7 64 bit into a sort of test mode. I have done that and have "Test Mode Windows 7600" in the bottom right corner of my Desktop. I still can't install the HTC USB driver as it brings up an error due to being not signed.
Without installing the new driver I cant change my ROM. There must be others in the same boat having changed to Windows 7. Please help.
Ok a few things:
I'm on windows 7 x64 build 7600, I'm having NO problems, just connect your device in windows let it connect with active sync
Then de-connect your blacktsone, shut it down, and hold volume down button then press start up, it will now start in bootloader mode
Now re-connect and wait for it to get installed by your pc!
If you really DO need htc drivers
Go into your bios
Turn of any quick booting AND turn off full logog display
When windows is starting AFTER the bootscreen you'll get a screen with some sort of TABLE in it with all your hardware and all they're IRQ's
at THIS moment when you see this table press f8
Then you get a boot menu
and you can follow your guide with turning off the signed drivers etcetera!
Great Greet Giblet
wow dude, treat me like the idiot I am. Step by step please.
"Then de-connect your blacktsone" - i guess you mean take out the USB cable?
I wait for it to get re-installed but nothing happens whilst in bootloader and the word serial stays at the bottom of the screen
OMG
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Some options to get a new ROM on your device:
Alternative Option: Run ROM from storage card (this requires HSPL on your device)
- Connect your phone to your pc with the usb cable
- Choose Disk Drive option on your phone when presented with the choice.
- Extract the downloaded rar and if not called BLACIMG.nbh rename the romfile to that (ruusigned.nbh is commonly used so rename when so)
- Copy the BLACIMG.nbh to your phone's storage card via Windows Explorer where it should show up as an removable harddrive.
- Disconnect your phone from the pc once copy has finished.
- Shut down your phone.
- Press Volume Down (left top of phone) and keep it pressed while pressing the Start button (on top of phone) once.
- The bootloader (red,green,blue,white screen) will now start, it will detect the new rom file and ask you if you want to update your current one.
- Confirm and follow instructions on screen
Done.
As for your unsigned drivers i can offer some tips:
- Press F8 after you have seen all your hard drives recognized in the bios bootup screen but before you see the Windows Logo.
- F8 might be set as a bootselector menu by your motherboard manufacturer, if this gets in the way of trying the get to the F8 options from Windows you can disable it in your BIOS (to enter press del)
- If you have Windows 7 Ultimate you are entitled to XP-Mode which is basically a built in virtual machine of Windows XP within Windows 7, some people have been succesfull connection their phone to that XP installation and were able to update via it.
Hope this helps. together with the previous poster's comment you should come a long way, good luck.
Heefy said:
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Click to expand...
Click to collapse
Oh lol, guess you just managed, grats on that. for future you could try the alternative option i posted, works garanteed irregardless of operation system.
Solution found, thread closed
In future try posting such queries in the Dummies guide: updating HTC USB Sync Drivers thread. Thats what its there for