I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
i've made the same wrong thing like you ... 5 days to find it out.
1. dont have a rom on your storagecard (well not in the root)
2. put the hardspl.exe on the desktop of your pc (also dont have a rom on the desktop)
3. start the hardspl.exe on the desktop with the usb pluged in.
and it will work and you will feel like me "like a dump noob".
SO YES - YOU HAVE TO START THE X1_HARDSPL.EXE FROM YOUR BLOODY PC, LAPTOP, ETC AND NOT FROM YOUR X1
Bennieficial said:
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
Click to expand...
Click to collapse
I had the exact same problem.
You need to:
Disable your internet connection(wifi/lan)
disable your virus detection and windows firewall (and any standalone fire wall you have)
Remove you MicroSD card
run hardspl (it should now complete the operation)
And flash to what ever rom you like (using the SD card method)
Re-enable your firewall/virus detection/internet connection (In that order)
thanks!! i got it working just fine now thanks to both of you guy's help!
ok one more problem. I am not able to get my X1 synced with WMDC anymore, just as it was doing before my failed attempts at Hard-SPLing my phone. How do I fix this?
ok do you have now the hardspl on the phone?
IF yes - it will sync.
1. dont connect the phone
2. delete the "Partnerschaft" in english perhaps the team in WMC (means delete the phone in MWC).
3. connect the phone it will say a "oh new phone" - give him the sync possibilities and it's done.
took a bit time the first time...................just checked it right.........hm got also problems.....yesterday it worked because he copied the changes ........but today!
Related
I figured it out!
I went to a blank computer and installed the T-Mobile Apps from scratch then the first thing I did after the reboot from the ActiveSync install...was rand the ROM upgrader (CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe)
....PRESTO.....
What I saw was the driver used when the phone goes into the Boot Loader screen (RED, GREEN, BLUE). It stated "USB Device" as the driver was loading in Windows XP...after it stated device ready to be used....it started!
I would suggest unistalling ActiveSync and reinstalling it from the T-Mobile Disc....this should work!
PM me if you have any problems.
Hi, I had this same problem after a bad flash. couldn't get ActiveSync to connect, Thought phone was F***ed, Got it going again tho
What I did was search the forun for file mtty
1) download and run. Must turn off A/S connect via usb first
2) When mtty rund it asks for a port. Select usb
3) Click ok, press enter on next screen then type "SET 14 0" press enter
4) Close this program and re enable A/S connect via usb
5) Re Flash with Rom File and it all went ok for me.
Note all my phone would do when Reset (Hard or Soft) was give the three colour screen
I fixed the previous issue now I'm stuck on connecting to my PC via USB with activesync.. I had it working fine, now all of the sudden after a hard reset it won't connect, I searched for other similar issues but didn't get anything on here. It just will not connect, I've tried the uncheck advanced thing in settings on my phone, another hard reset, deleting/reinstalling activesync, I can't get it to sync, it will only charge when connected. Thanks for looking
I better start reading entire posts
You need to provide better info. What operating system is on your computer?
Does your computer/OS give a sound to aknowledge the new hardware/device connected? Like when you plug in a USB key?
Check windows device manager and remove any USB devices that may be your Kaiser and restart the system (without the Kaiser connected).
Have you tried deleting devices from activesync? If it is stuck on a different device, it won't sync another and a hard reset probably makes it look like a new/different device.
Fast replies, thanks! No sound when connecting, no green icon, it stays grey of course, I'm on XP 32bit, using activesync 4.5 and using WMWiFirouter to connect at the moment to surf. Usually I tether using it as a usb modem which won't work of course right now. I just deleted the device, still no go... Oh and i deleted everything under my USB submenu in hardware manager/device manager, and I just get the same popup still, "USB device not Recognized, One of the usb devices attached to this computer as malfnctioned, and windows... etc etc"
"USB device not recognised" comes from the PC? Does that mean the PC sees the USB device but doesn't know what to do with it?
Disable WMWiFiRouter on the phone and see if that affects anything. If it has anything installed on the PC try uninstalling that.
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
You didn't answer:
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.
JFX said:
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
Click to expand...
Click to collapse
If you want to do that, you could try to uninstall the previously installed device driver by going to Control Panel -> System -> Hardware tab -> Device Manager -> Universal Serial Bus Controller...go from there
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Check AS connection settings if USB is enabled. If it is, disable it, put the phone in bootloader and see what happens.
You don't have anything like WM5storage installed on the device, do you?
Better to reflash the phone (by storage card) before format your PC.
It's bedtime for me, good luck. Try the G.W.E.N.I. thread and wiki and see if anyone has your problem before. I think there has been.
JFX said:
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Click to expand...
Click to collapse
Silly question but did u try to reboot your PC?
EDIT: try to read this threads, maybe there is a solution for u:
http://www.google.com/cse?cx=000825...esync&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
i've got a qtek 2020i
but something went wrong with an upgrade downloaded from qtek netherlands.
now i can't turn it on it doesn't work anymore
in teh screen i can read
serial
v1.01
or when in the cradle usb
plz help out here i can't fint it with active sync.
inreally need the damn thing. it's like losing my right hand
it came with winmobile 2003 ce
maybe i need a more resent version.
I am not an expert by any means but the fact that it switches to USB when cradled means it should be reflashable with a new ROM, search the o2.ie site for their most recent ROM. Not saying their offering is the most recent but it should get you going again
i searched but i can't find anything.
i don't know were i can find it
and if i do how does it work?
my telephone is using Orange / T mobile
Ok I had the same problem recently and managed to fix it using mtty.exe, and a working flash file.
The procedure goes like this:
Get mtty.exe, ( I found a copy on a file sharing site using google ).
Open Activesync and disable the USB option in connection settings, you'll need the usb port for mtty.
Put the device in the cradle, and check that it says USB , (it may say serial 1.01 at this point, don't worry, this happened on mine).
Run mtty.exe, and select USB, this will open a terminal window allowing you to communicate with the device. If you don't see USB as an option then exit mtty and try plugging the USB cable into another port.
Once you have the terminal window open, type task 28 and press enter, this will format the DiskOnChip.
Once this is complete and there are no errors, exit mtty, and run the upgrade, this should hopeully restore your Alpine.
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
try changing the usb port
i've tried but didn't work
try reboot sometimes computers start on the whole unknown usb device
and the only cure is reboot
is the only solution?
it's possible is an hardware issue?
Re-install WIN 7
If rebooting too doesn't work then i recommend re-installing Win 7, it hardly takes half an hr..
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
i'd uninstall wmdc even search and remove any traces of it in regedit
of cause if you reinstalled win7 from scratch that should happen automaticly
or I would try connecting it to another computer to verify that the device connector was not damaged
it's possible is an hardware issue?
because the pc recognise my diamond with bluetooth
news
my pc recognize my diamond with bluetooth but for the usb port nothing...
i've tried to install a new rom version but nothing...
how i can install an original bootloader from internal storage?
as I said try connecting it to another computer xp with activesync or later with wmdc
anything
you don't need to sync or anything just detect it if works you could even use a public library computer if they are not too locked down
thats how you detect if the connector in the phone have been damaged
about doing it from Internal storage I'd suggest you check the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
maybe around the "Upgrading / cooking / flashing:" section
i think the usb connector on the phone is broken
the only solution is the assistance...but i have the hardSPL inside my phone!!!
Try it on another PC .
i've tried...but nothing
windows fault
This is actually a problem with windows.
I had the same issues but solved it by fiddling with the device manager. This is slightly more advanced than just plugging the phone in but it's not that hard.
Also you can check to see if this is really a problem with the phone. Try to connect the phone in disk mode (so it registers as a memory stick). If it shows up it means it really is windows having some issues detecting the device.
I have the same problem, but when the TD is in disk mode no problem at all
stronkyz said:
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
Click to expand...
Click to collapse
STEPS (on HTC TOUCH DIAMONF):
1. START
2. SETTINGS
3. CONNECTIONS (tab)
4. USB TO PC
5. UNCHECK "Enable advanced network functionality"
6. OK
Try now to connect your HTC with your PC (Win 7)
stronkyz said:
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
Click to expand...
Click to collapse
may be you could change diamond's rom
Hi everybody,
I have a 64-bit PC with Windows 7 Ultimate Service Pack 1 and a Samsung Galaxy S Advance GT-I9070 with Android 4.1.2.
I can't install a driver in order to make Windows recognize correctly the phone when I connect it via USB cable.
I've installed and uninstalled Samsung Kies many times with no results. I've also tried some Samsung driver from Windows Update with no success...
When I connect the phone, it is recognized as a MTP Device and the driver installation starts, but always ends with an error, as shown in the attached screen-shot image.
What can I do?
Thank you very very much.
Note: in another PC with WinXP I have no problems.
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
explanation
King ov Hell said:
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
Click to expand...
Click to collapse
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
ZioAlfredo said:
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
Click to expand...
Click to collapse
Did you root phone ? or installed a ROM or you just using it stock ?
I noticed something too; if you any have PIN or Password you have to unlock phone otherwise MTP not works. Unlock it and try too.
CCleaner will *probably* be enough but if you want to make sure go to regedit.exe and go to;
Code:
HKEY_CURRENT_USER/Software/
Then delete KIES & USB Driver stuff (don't delete system USB configs & drivers just Samsung's softwares )
EDIT: In start menu click to RUN (or whatever I don't now it's name in English, you're entering a text) Then write
Code:
%AppData%
Then delete KIES & Samsung folders and files.
I've just Updated the phone firmware from Android 2.3.6 to 4.1.2 with Samsung Kies on my WinXP PC.
I've deleted all Samsung Kies registry entries.
Now I'm going to install the driver you suggested...
Let me see results...
King ov Hell said:
Let me see results...
Click to expand...
Click to collapse
Failure... The same as always
ZioAlfredo said:
Failure... The same as always
Click to expand...
Click to collapse
...
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
ZioAlfredo said:
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
Click to expand...
Click to collapse
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
anantttt said:
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
Click to expand...
Click to collapse
Yes to all.
shut_down said:
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I've just tried to reboot the phone before connecting it to the PC, but I get the same error (see attachments).
Last year I managed to connect the phone to this PC, but, in any case the connection got interrupted after a while (see this thread).
I don't know what to do...
I had the same problem when i formatted my PC 2 days ago. I did some trial and error and it worked.
1. Dont use any USB Hub if you are using.
2. Remove the Pattern lock or any password security etc. Go to lock screen and select 'None'. (I dont know why but windows doesn't recognise if the device is locked)
3. Have Kies installed. Even new version worked for me. I used 2.5.13043_14
4.Connect your device with the USB cable (Should have MTP option selected which is by default)
5. Windows automatically recognises now and installs the necessary files.
P.S:- Remove the security pattern, etc. It really works.
If worked then pls reply.
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
ZioAlfredo said:
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
Click to expand...
Click to collapse
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
shut_down said:
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
Click to expand...
Click to collapse
This is how my PC recognizes my phone. The driver seems to be old, but I've configured Windows for downloading drivers automatically and that is all it can do.
Today, th PC did not recognized the phone at once. Then I unmounted and mounted back the MicroSD card and the PC recognized it.
But, after few seconds of folder browsing, the PC lost the connection. I'm thinking that the problem is the SD card.
Solved!
Solved!
It was the USB cable.
I replaced it with an original one and now it works.
Thank you everybody for your effort!