Problem with Tilt, thanks for viewing - Tilt, TyTN II, MDA Vario III General

I fixed the previous issue now I'm stuck on connecting to my PC via USB with activesync.. I had it working fine, now all of the sudden after a hard reset it won't connect, I searched for other similar issues but didn't get anything on here. It just will not connect, I've tried the uncheck advanced thing in settings on my phone, another hard reset, deleting/reinstalling activesync, I can't get it to sync, it will only charge when connected. Thanks for looking

I better start reading entire posts

You need to provide better info. What operating system is on your computer?
Does your computer/OS give a sound to aknowledge the new hardware/device connected? Like when you plug in a USB key?
Check windows device manager and remove any USB devices that may be your Kaiser and restart the system (without the Kaiser connected).
Have you tried deleting devices from activesync? If it is stuck on a different device, it won't sync another and a hard reset probably makes it look like a new/different device.

Fast replies, thanks! No sound when connecting, no green icon, it stays grey of course, I'm on XP 32bit, using activesync 4.5 and using WMWiFirouter to connect at the moment to surf. Usually I tether using it as a usb modem which won't work of course right now. I just deleted the device, still no go... Oh and i deleted everything under my USB submenu in hardware manager/device manager, and I just get the same popup still, "USB device not Recognized, One of the usb devices attached to this computer as malfnctioned, and windows... etc etc"

"USB device not recognised" comes from the PC? Does that mean the PC sees the USB device but doesn't know what to do with it?
Disable WMWiFiRouter on the phone and see if that affects anything. If it has anything installed on the PC try uninstalling that.
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.

Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.

You didn't answer:
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.

JFX said:
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
Click to expand...
Click to collapse
If you want to do that, you could try to uninstall the previously installed device driver by going to Control Panel -> System -> Hardware tab -> Device Manager -> Universal Serial Bus Controller...go from there

Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.

Check AS connection settings if USB is enabled. If it is, disable it, put the phone in bootloader and see what happens.
You don't have anything like WM5storage installed on the device, do you?
Better to reflash the phone (by storage card) before format your PC.
It's bedtime for me, good luck. Try the G.W.E.N.I. thread and wiki and see if anyone has your problem before. I think there has been.

JFX said:
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Click to expand...
Click to collapse
Silly question but did u try to reboot your PC?
EDIT: try to read this threads, maybe there is a solution for u:
http://www.google.com/cse?cx=000825...esync&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8

Related

diamond & windows 7

hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
try changing the usb port
i've tried but didn't work
try reboot sometimes computers start on the whole unknown usb device
and the only cure is reboot
is the only solution?
it's possible is an hardware issue?
Re-install WIN 7
If rebooting too doesn't work then i recommend re-installing Win 7, it hardly takes half an hr..
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
i'd uninstall wmdc even search and remove any traces of it in regedit
of cause if you reinstalled win7 from scratch that should happen automaticly
or I would try connecting it to another computer to verify that the device connector was not damaged
it's possible is an hardware issue?
because the pc recognise my diamond with bluetooth
news
my pc recognize my diamond with bluetooth but for the usb port nothing...
i've tried to install a new rom version but nothing...
how i can install an original bootloader from internal storage?
as I said try connecting it to another computer xp with activesync or later with wmdc
anything
you don't need to sync or anything just detect it if works you could even use a public library computer if they are not too locked down
thats how you detect if the connector in the phone have been damaged
about doing it from Internal storage I'd suggest you check the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
maybe around the "Upgrading / cooking / flashing:" section
i think the usb connector on the phone is broken
the only solution is the assistance...but i have the hardSPL inside my phone!!!
Try it on another PC .
i've tried...but nothing
windows fault
This is actually a problem with windows.
I had the same issues but solved it by fiddling with the device manager. This is slightly more advanced than just plugging the phone in but it's not that hard.
Also you can check to see if this is really a problem with the phone. Try to connect the phone in disk mode (so it registers as a memory stick). If it shows up it means it really is windows having some issues detecting the device.
I have the same problem, but when the TD is in disk mode no problem at all
stronkyz said:
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
Click to expand...
Click to collapse
STEPS (on HTC TOUCH DIAMONF):
1. START
2. SETTINGS
3. CONNECTIONS (tab)
4. USB TO PC
5. UNCHECK "Enable advanced network functionality"
6. OK
Try now to connect your HTC with your PC (Win 7)
stronkyz said:
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
Click to expand...
Click to collapse
may be you could change diamond's rom

[Q] Captivate USB problems

Hi everyone,
I have an AT&T Captivate SGH-i897 (2nd hand) and i can't mount the phone to my laptop (winXP 32bit). When i plug in the cable to the phone and then the PC i get the "device not recognized".I've donwloaded the Samsung drivers from the xda wiki page and extracted them and tried to update the driveres via Device Mng ,but didn't work.Also dl'ed the Samsung drivers 5.0.x instaled ,and still nothing.USB Debugging is on...
So to recap,my top can't recognize the phone('s internal sd card) so plz help ???????
Try this, go into usb settings and choose "mass storage"
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
install kies
I would also recommend trying to fully uninstall all the drivers that associated on your pc with your phone (samsung or otherwise), and then reinstall the drivers before you plug in your phone. Then try to reconnect.
Just covering the basics. Assuming your phone is working correctly.
You have tried multiple USB ports on your computer, particularly those on the back if it's a desktop.
You have installed correct drivers (x86 or x64)
" for the correct operating system.
You have uninstalled the drivers before trying to reinstall.
You've tried to get Windows/ Mac to find them online (assuming you're using versions of OS that support doing that)
You've first tried Kies mini before full version, uninstalling in between. (Kies full version isn't supported for US, there are workarounds, but that's a different discussion)
On the phone you tell the phone to connect 'USB storage' (from the pull down menu after connected or in the settings)
I too am having problems with USB connectivity on a notebook with Win7/64. The usual failure mode is Windows not recognizing the USB device. I have followed ZBigT's basics, step by step and still cannot connect.
FWIW, my registry is awash with Samsung entries, some of which cannot be deleted.
I've even tried the AIO Toolbox application (to install the 64 bit drivers) to no avail.
Any other tips?
Is usb debugging turned off?
o hey guys sry for keeping u waiting,
i menaged to install ginger ,
the problem was my lap....rusty old bucket!!!!
had my friend come over with his lap and it worked like a charm ,
the problem is now i need a new one ;(,
damn
mrhaley30705 said:
Is usb debugging turned off?
Click to expand...
Click to collapse
Yes. Still no love. Have tried:
usb_drivers_GalaxyS_x64
SGH-i897_Captivate_USB_Drivers_5_02_0_2
mini-KIES
Kies
AIO
uninstalling reinstalling each time
When I plug in the Captivate, any of 3 USB ports on the laptop, Windows gives the "Unrecognized Device..." message.
Go to settings/about phone. Look at the very bottom to see what rom you are running.
mrhaley30705 said:
Go to settings/about phone. Look at the very bottom to see what rom you are running.
Click to expand...
Click to collapse
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
mabovalu said:
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
Click to expand...
Click to collapse
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
mrhaley30705 said:
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
Click to expand...
Click to collapse
Thanks for sticking with this. I was able to connect. I as focused on the Registry remnants, but your advice to clear out the Samsung folder in Programs worked. Thank you.
Additional comments: I am now running the Dlev ROM, it's OK, but when I plugged in the USB cable, just to the phone, it launched the Alarm Clock app! So I deleted that.
Then on the first of my four USB ports I got a USB driver failure to install, then the Windows Unrecognized USB device on ports 2 & 3. On port 4 it worked. (This is a Lennovo/Thinkpad notebook.)
I used the usb_drivers_GalaxyS_x64 package as that also worked on my desktop.
Thank you very much.

I9305 usb connection/driver problem

I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Raistlin1158 said:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Click to expand...
Click to collapse
Thanks for the quick reply.I did that and it was set to mtp + adb...
When I then connected it it tried installing the driver and I got..
Driver device software was not installed.
Please consult with your device manufacturer for assistance getting this device installed
MTP USB Device X Failed
I tried updating the MTP drivers again from device manager but this time got
Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
SAMSUNG Mobile MPT Device
This device cannot start (code 10)
From what I'm reading it's a computer error not the phone. Can anyone suggest a new set of drivers to download (that doesnt involve Kies) as I've had issues with picking up harmful software from random sites when I've been struggling to find drivers.
I tried using the suggestion at the bottom of here r.e.Portable Devices and deleting the Upperfilters string Link but also to no avail.
Oh, and yes I've tried different ports and cables.
Well that's me done for the evening! I've tried everything mentioned in this thread including updating java and windows media player and all the afformentioned stuff but still no dice.
Could it be the actual drivers or a random windows 7 setting that I haven't yet tweaked since my clean install of windows??
http://d-h.st/YpV
Here are the correct drivers, install then reboot your pc.
Raistlin1158 said:
Go here for drivers.
---------- Post added at 01:00 AM ---------- Previous post was at 12:57 AM ----------
http://d-h.st/YpV
Here sre the correct drivers, install then reboot your pc.
Click to expand...
Click to collapse
Sorry,I know I'm tired but I can't see a link on your post...
Highlighted in red
The newer drivers don't really wwork with the 9305 so find some older drivers. That works for me
Sent from my GT-I9305 using xda app-developers app
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
woldranger said:
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
Click to expand...
Click to collapse
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
Cheers, yeah, I was going to try them but I wasn't at my pc at the time I wrote that. I've downloaded the exe package but now it seems there are still drivers to uninstall - I uninstalled the drivers through device manager and went into my C drive and removed the SAMSUNG folder with the USB drivers in it. I'll restart the pc and hope that helps with the removal....
woldranger said:
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Click to expand...
Click to collapse
Having the same problem. but I am on 4.3 rom using carbon rom a few days then transferred to pac man rom. My cellphone is not detected in my computer but it is being detected in the safely remove usb options. I tried to use a usb otg cable and a flash disk. No notification is seen on my phone but I can access the files on the flash disk (using usb otg cable) in the file manager. Tried the *#7284# but error occurs and says connection problem or invalid MMI code. I found that MTP udb device says failed
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
woldranger said:
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
Click to expand...
Click to collapse
Just got the same problem. But my problem is already solved. Just flash a new rom. In my instance, I flash ripper rom

[SOLVED] Windows 7 can't recognize Samsung Galaxy S Advance GT-I9070

Hi everybody,
I have a 64-bit PC with Windows 7 Ultimate Service Pack 1 and a Samsung Galaxy S Advance GT-I9070 with Android 4.1.2.
I can't install a driver in order to make Windows recognize correctly the phone when I connect it via USB cable.
I've installed and uninstalled Samsung Kies many times with no results. I've also tried some Samsung driver from Windows Update with no success...
When I connect the phone, it is recognized as a MTP Device and the driver installation starts, but always ends with an error, as shown in the attached screen-shot image.
What can I do?
Thank you very very much.
Note: in another PC with WinXP I have no problems.
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
explanation
King ov Hell said:
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
Click to expand...
Click to collapse
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
ZioAlfredo said:
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
Click to expand...
Click to collapse
Did you root phone ? or installed a ROM or you just using it stock ?
I noticed something too; if you any have PIN or Password you have to unlock phone otherwise MTP not works. Unlock it and try too.
CCleaner will *probably* be enough but if you want to make sure go to regedit.exe and go to;
Code:
HKEY_CURRENT_USER/Software/
Then delete KIES & USB Driver stuff (don't delete system USB configs & drivers just Samsung's softwares )
EDIT: In start menu click to RUN (or whatever I don't now it's name in English, you're entering a text) Then write
Code:
%AppData%
Then delete KIES & Samsung folders and files.
I've just Updated the phone firmware from Android 2.3.6 to 4.1.2 with Samsung Kies on my WinXP PC.
I've deleted all Samsung Kies registry entries.
Now I'm going to install the driver you suggested...
Let me see results...
King ov Hell said:
Let me see results...
Click to expand...
Click to collapse
Failure... The same as always
ZioAlfredo said:
Failure... The same as always
Click to expand...
Click to collapse
...
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
ZioAlfredo said:
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
Click to expand...
Click to collapse
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
anantttt said:
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
Click to expand...
Click to collapse
Yes to all.
shut_down said:
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I've just tried to reboot the phone before connecting it to the PC, but I get the same error (see attachments).
Last year I managed to connect the phone to this PC, but, in any case the connection got interrupted after a while (see this thread).
I don't know what to do...
I had the same problem when i formatted my PC 2 days ago. I did some trial and error and it worked.
1. Dont use any USB Hub if you are using.
2. Remove the Pattern lock or any password security etc. Go to lock screen and select 'None'. (I dont know why but windows doesn't recognise if the device is locked)
3. Have Kies installed. Even new version worked for me. I used 2.5.13043_14
4.Connect your device with the USB cable (Should have MTP option selected which is by default)
5. Windows automatically recognises now and installs the necessary files.
P.S:- Remove the security pattern, etc. It really works.
If worked then pls reply.
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
ZioAlfredo said:
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
Click to expand...
Click to collapse
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
shut_down said:
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
Click to expand...
Click to collapse
This is how my PC recognizes my phone. The driver seems to be old, but I've configured Windows for downloading drivers automatically and that is all it can do.
Today, th PC did not recognized the phone at once. Then I unmounted and mounted back the MicroSD card and the PC recognized it.
But, after few seconds of folder browsing, the PC lost the connection. I'm thinking that the problem is the SD card.
Solved!
Solved!
It was the USB cable.
I replaced it with an original one and now it works.
Thank you everybody for your effort!

Cant write to storage via MTP (Or any other mode) from Windows 10 to OP3T

--- SOLVED see first post second page! ---
Hello XDA,
I am only able to read data on the phone when connected via USB on windows. On the phone itself I can change whatever I want ( Via ES-explorer for example) But in windows file explorer I can't. It will not tell me that I do not have proper writing rights, but instead just decides to freeze for 10 minutes everytime I try to make a file change, to eventually give me a beautiful
"windows explorer is not responding" pop-up
What I have tried :
-Rebooting,
-Reinstalling USB drivers,
-Switching USB debugging on and off,
-Reinstalling root,
-Installing the newest Oxygen OS update from February,
-used different cables (also an old micro USB with adapter) And nothing works.
This sucks because I was just trying to change my photography workflow from being Desktop based to being Android based..
Any suggestions ?
Greetings,
Thijs
www.instagram.com/thi_js
Edits: Clarify issue
i have the same problem be great to find a solution
Did you maybe noticed when this problem occurs to you? I know that one months ago it just did work. Should I reinstall Windows completely?
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
lorfo123 said:
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
Click to expand...
Click to collapse
How should one file a bug-report for windows 10 then, this can't be something that shouldn't keep unnoticed by them.
Did rolling back fix something for you, and how did you do so?
I've checked another Windows 10 computer which hasn't been updated and it recognises my one plus 3T so if you Google / YouTube windows 10 roll back it should work
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
1asbak1 said:
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
Click to expand...
Click to collapse
The only other thing I could suggest is using a virtual machine to run win 7
Did you try back usb ports?. My pc with windows 10 fails with the front ports.
Solution
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
ayush2901 said:
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
Click to expand...
Click to collapse
Which version of TWRP are you running? The thing is that If I afterward can't restore the data via USB haha, then the whole point of backing it up seems invalid
lorfo123 said:
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
Click to expand...
Click to collapse
This actually worked. Wauw.
Had to reboot a view times in order to get it in effect, nonetheless, THANKS let the creativity start again
Really,My A** is burnt while my phone showing messages to update,,, Fiunally donw..Thanks a lot...!!
super it works
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
picollo7 said:
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
Click to expand...
Click to collapse
When you connect the phone to pc do you get a notification on your phone with the USB options?
DirkGently said:
When you connect the phone to pc do you get a notification on your phone with the USB options?
Click to expand...
Click to collapse
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
picollo7 said:
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
Click to expand...
Click to collapse
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
DirkGently said:
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
Click to expand...
Click to collapse
Haha, yeah. Does anyone have links to the drivers that work for them?

Categories

Resources