Related
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
mod edit;
the title has been changed as you did not have a bricked phone...if you ever brick you phone belive me,,,u cant restore it at home.
regards
faria
It's not bricked. As long as you can go into bootloader mode, and flash it with Cingular clean ROM you should be fine..
Have you ever read the note from faria? He said NOT to upgrade to AKU 3.2 without IPL/SPL version 2.xx.
You can try to take out you're SIM card, go to the boot screen by pushing the cam button and the on button and flash it again with te original ROM.
Good luck
Sorry for my bad English
or you can try it this way: link
just go into bootloader (camera button + soft reset) and flash that 1.5 ROM, which is able to downgrade.
and then
!Do !NOT! install any 2.x ROM (like farias ) for the 1.x bootloader (ipl/spl)!
before it you could flash any official 2.x ROM ;-)
I'm pretty sure that this was resolved in another thread and not updated here...
Dr Puttingham said:
I'm pretty sure that this was resolved in another thread and not updated here...
Click to expand...
Click to collapse
You are correct.
--M
(granted there may be a lot of pages to read through to get to the information...but a solution was posted.)
Yes I was pretty sure I saw it resolved in another thread, might have even helped...
Ahh, the joys of posting across threads... makes me feel oh so nice!
Thanks
Thank you friends for all those things.
Things seem to get worse, I couldn't even turn the fone on.I had full charge of batt. before upgrading .After that "accident", i left the fone alone for one night, when i woke up in the morning, tried to turn on the fone but i failed.Tried to enter bootloader mode but failed.The fone now becomes a brick.
-Do you friends know how to revive my fone?
-Do you know where can i have it revived?
Thanks for all!
Leave the battery out for few days, then try again after full charge in BL mode.
TIA
BL Mode????
almozaffar said:
Leave the battery out for few days, then try again after full charge in BL mode.
TIA
Click to expand...
Click to collapse
------------------Thank you very much almozaffar and friends!But how can i full charge the batt. in BL mode?I just have the wall charger as included in the box, a USB cable.What i need in BL mode?
I find no red LED(indicating that the fone's being charge)when i connect the fone with my wall charger as well as with the USB cable.I realise that the batt. gets hot but i'm not sure if it's charged.
Best regards
Someone just told me to remove the batt. for about 2,3 days then recharge, i'm not sure if that works but i'll try.Thank you!
Same problem here!
I have a Cingular 8125, I tried to update it to MDA with IPL/SPL 2.26. I was successfully flashed it. After it turn on, everything work fine, so I turned it off, so that I can inside my sim card. After I inside my simcard, my phone is now can never turn on again. I tried and tried again, there was no used. I plug in the power to the phone, there is no power. When I unplug the power, I see a flash from the screen, or after I remove the battery I see a flash from the screen. I have no idea what it is doing, but i can't turn the power back on. Can some please please help me!
Thanks,
Bricked fone huh? No way!!!
After researching the Wizard, i know how to revive it and do not have to spend a cent!Anyone interested?Please PM me!I'll post later when i have time the whole procedure.
@unknown84: I send u file on how to revive your fone.
How to revive your 8125.
Friends,
First remove your main battery, then plug and unplug the wall charger connecting to your fone, if the RED LED and your Fone screen flash then you can revive your fone(at least it works with my fone,wish you good luck!)
Read these lines carefully before you proceed to the procudure.That really works with my phone(i'm not sure if it works with your fone but i wish you good luck)
*Preparation:
1.Charge the main batt. for 2 hours long.
2.Remove your main batt., charge without the main batt. for 1 minute.
3.Plug and unplug the wall charger for at least 3 times ( main batt. removed) (you'll find that your fone keep flashing, both LED and your Fone screen, by doing this i hope it'll help with waking up the backup batt.)
4.Download the official Cingular 8125 ROM version 2.25(you can find it everywhere)
-Three ways to enter bootloader mode:
a.Hold firmly CAM + Power until Bootloader Mode appears
b.Hold firmly Voice Dial,Rec Button + Power until Bootloader Mode appears
c.Hold firmly CAM + Voice Rec + Power ........
*Procedures to followremember to remove your main batt. before doing hereafter)
1. Hold simultaneously 3 buttons : the CAMERA button, The Voice Recording Button, and the Power button.(or follow one of three ways to enter bootloader mode listed above)
If this doesnt work, do that again by holding those buttons, plug and unplug the wall charger and still keep holding those buttons
(as PLUG and UNPLUG the wall charger, you'll see the Red LED and the screen FLASH, i guess it's the way to WAKE our backup batt UP)
2. Hold those buttons will start the bootloader mode.
3.When your fone's already in the bootloader mode, put the main batt. in
(I'm sure u know what u'll do next if u can start the bootloader mode!!)
4.Unplug your wall charger
5.Plug in the USB cabble connecting to your PC.
6. Start flashing with your 2.25 ROM.
Note: When your fone's in its bootloader mode you can find out if u have a G3 or G4 chipset easily by
looking up at its IPL and SPL. G3 comes with x.xx( ex: 2.25)in both IPL and SPL.G4 comes with x.xx.001 in both IPL and SPL.
If u have a G3 chipset, do as i told u above. If u have a G4 chipset, just download the official ROM for your G4.
Good luck and don't flash again without reading carefully!
battery trick
Congras.
So the Battery trick works. I learned this trick even from motorola phone and apllied it to my 8125.
Now thank you for the newtrick you just detaled us with, appreciate itvery much.
TIA
almozaffar said:
Congras.
So the Battery trick works. I learned this trick even from motorola phone and apllied it to my 8125.
Now thank you for the newtrick you just detaled us with, appreciate itvery much.
TIA
Click to expand...
Click to collapse
=========
You're welcome almozaffar, you did help me with this to find a solution for our users' troubles here.
Thank you too :-D
I have brick
Could you please write for how long did you repeat the steps that you described, before getting BL screen.
THX
Still bricked
It certainly doesn’t work for me. Screen & led flash when taking out usb plug without battery, but that all.
simmilar problem
My HTC Wizard is having simmilar problems but even following these directions, I still cannot revive it.
I know my battery is almost full because when it died it was full. I don't know anyone else with a Wizard so I can't charge it, and this may be where the problem lies: Weather or not the battery is in my phone, whenever I connect wall power, it displays the message "Press send to restore...." and will not charge
When I plug/unplug the wall power with the battery removed, my screen does flash along with the red LED, but only once when I pull the power. Following the directions I have removed the battery and I'm plugging in the wall power jack in an attempt to enter bootloader screen. But just like every time, about three to four seconds after I plug it into the wall, the phone posts the "Press Send to restore factory, blah, blah blah". I don't know if this is part of the problem but it might be.
I've tried almost everything i found on forums, and what I can think of but still to no avail. I can't get my Wizard to enter bootloader mode. I've also tried every method to enter bootloader mode that I could find :/
any suggestions?
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
this is another story of bricked Herald device
there's no solution for that you have to wait
halder said:
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
Click to expand...
Click to collapse
what part is it stuck on, the white screen?
Provide more information
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
can we start to donate for man who can solve this problem?
can we start to donate for man who can solve this problem?
i can donate 100$
me too
just help as we will do evey thing
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake . another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
I don't know if there's anything you can do, but try this. It hasn't been tried on the Herald, that I know off, but it's worth a try.
halder said:
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
Click to expand...
Click to collapse
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
problem (300) bootloader
I have problem the same. exists somebody that helps me? urgent
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
ok, im inbetween a newb and a full out destructive force to any type of moddable device and im having a little bit of trouble with my cingular 8125. ive had this phone for a few months and i am having the hardest time dealing with the rom on the phone now. ill give a quick breifing on it:
got it with original cingular rom, not sure what spl or ipl on it but the first thing i did was unlock it by myself, cid and sim unlocked, and then updated to a jaguar wm 6.1 rom which worked fine. decided i was going to unfortunately sell this phone so i decided to upgrade it one more time to see if i really wanted to sell it, i then bought the upgrade to go past my 2.21 ipl and spl. i got my unlocker and followed my instructions and got a brick. but not a full brick. its stuck in the bootloader screen. after reading countless threads, i learned that i should be able to just still update a rom to the phone with no problems which actually works, but as soon as a rom completes it goes right back to my bootloader screen so help me! please cuz now thats its a challenge again, i want the phone! plus all my info is on the phone still back up
Flash the official stock ROM first, then use Button's ROM to downgrade your IPL and SPL before unlocking CID.
post the present IPL/SPL it displays now.Which rom you are trying to flash now ?
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
dimedash12 said:
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
Click to expand...
Click to collapse
WEIRD !
You got mixed Bootloaders of G3 And G4,IPL 2.21.0001 is G4 and SPL 2.21 is G3,as you posted,well,can't say which was original,only you can tell,but some how its mixed Bootloaders,in this situation no Rom will flash,its a 'Brick'.
If as Zabardast says its bricked then you have three options:
1. Get a new Wizard
2. Get a new Wizard Motherboard
3. Get a Wizard with broken LCD from eBay and replace its LCD with your current one and Enjoy!!! (Cheapest)
lol this is tough! but no worries, ill be back with some other pda at some point and time and then ill try and take this phone apart! but the weird thing about my wizard is that this only happened when i tried to update the phone with the CID unlock program that you have to pay for!
lol it was perfectly fine until i tried to do it! oh well, back to my crappy p168!
May be that CID Unlock program was not meant to be for a G3 and you were updating a G3 so it mixed you IPL/SPL and caused a kinda BRICK. So please be careful before doing flashing things because if you dont be carefull then your PPC may become a heavy paper weight, and a costy one too. LOL. TC
kitty4uhig said:
Farming for eq2 plat isn't easy, but you can buy eq2 plat, guides, accounts & items on sale. We have revolutionized the exchange of money to eq2 plat. Purchase eq2 plat& power up your character ot the next level. Our world class customer service will make sure you are more than satisfied with every purchase. Feel free to contact our 24 hour live support with any questions you may have. Shop now and play as a VIP!
Click to expand...
Click to collapse
Stop this nonsense immediately,otherwise it'll be reported and you'll be banned.Its spam !!!
try this: http://forum.xda-developers.com/showthread.php?t=276963
Cingular 8125 problems
Ok guys i am really pissed i have been looking for three days and cant find it, first off my IPL is at 1.01 and the SPL is at 2.25 and i cant fix it i wanted to install the original 2.25 again and start from scratch but can not find the damn thing so if anyone has it can u just upload it fo me and give me a link that i can get it at please i am sick and tired of waitnin i really like this phone and i dont want to risk bricking it thanks.
Ok, grimgod, aggression is reaaaallly ugly and no freakin one will help with that sh!t attitude (pardon the language, mods). The senior members do everything they can to help the noobs. Have you tried reading the flashing guide, wiki, or tutorial? I'd bet even money you haven't. Have you CID unlocked? Did you flash the button rom twice ( as the guide suggested to get ipl/spl both 2.xx)? Did you flash the official tmo rom (found im the flashing guide)? Have you done anything other than sit on your hands and wait for it to be handed to you? READ AND SEARCH!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=310831 <HERE!!!!!!!!!! Should I flash your device, too?
Similar issue... need some Wizard Expertise
I picked up a coworkers old Cingular 8125 that he'd had in a drawer for about a year. Battery was right dead so the phone wouldn't boot. I charged the battery on an external charger for a few minutes, put it back into the phone, and plugged it in to the charger until the LED went green indicating a full charge.
When I power up I see the T-Mobile splash screen (light gray background, some square dots, and the "T-Mobile" logo). And there it stays indefinitely.
Tried a hard reset (Comm Mgr + Voice Cmd + Soft Reset), and it said "Press Send to restore factory default". Pressed the green dialer key (I assume that's send), and it says Format FAT partition, FAT partition complete, and then returns to the same T-Mobile splash screen and hangs there.
So then I tried putting it into Boot Loader manually (Power On + Camera). No problem, shows IPL 2.26 and SPL 2.26. Plug it into the computer USB port (running XP Pro), and then the USB connection shows on the phone. Attempted to flash the Wizard Love ROM to get this thing back to square-one. Error 260. Attempted to flash the T-Mobile stock ROM. Error 260.
Between each flash attempt, I'm pulling the battery out and starting fresh. I think I've followed all the steps I'm finding in multiple threads. But for some reason I'm not able to get this thing to communicate via USB. All RUU's give an Error 260. Am I missing something?
Forgot to mention I'm following the steps outlined in this thread from Dr P. To the letter!
Also did a little reading up on using the MTTY method in this thread by Drug_Store. Thought maybe the existing ROM might be intact, and I might be able get it to a 256MB MiniSD, then write the backup ROM from SD in boot loader. Well, for some reason I don't even see the USB connection option when I use the MTTY - can't ever get to a point where I can issue commands. Again, I think I'm following the instruction. But still no juice.
Nudge, nudge. I'd donate for a solution that works... otherwise I have to keep letting my 10 year old play The Quest on my phone.
Hi There
plz help me
while upgrading Kjam MY PC restarted
and now My Kjam started Automatically on boot loader no HTC Or Imate Screen
and No Hard reset
Download and flash official k-jam stock rom to recover back to its default status than proceed further.
I has the same problem
sometime ago i had the same issue my F#$kn PC restars and my phone goes directly to vbootloader and it was caused cause i have flash my device with the miniSD in it... but is not prooved some people said that it is not the trouble.... what ever
when you recover your XP just plug your device to the PC via usb in bootloaders mode... unplug your miniSD and if you want.... your SIM card (it doesnt matter at all) and reflash.
if it doesnt works try the method described in my Signature link... Trying MTTY to revives a wizard everywhere stucks!!
But... is recomended do first a reflash in bootloaders... then if not works contact me to guide you trough the steps on MTTY...
Good luck
(OH! be sure that dont use too much your device in bootloaders cause the batt dont charge in this mode and we need more than 70% to reflash)
by the way... is G3 or G4? what info do you have?
zabardast_1 Thanks For Ur Reply
+ Que PPC
My Kjam dosen't Turn on now i will try to reCharge it and i hope ur replay help
My Phone is G4
and plz tell me any thing May help me ..
ThanX Alot
Is your batt
Your batt is dead...
I told you... dont use it cause in bootloaders dont charge....
So try to get an only batt wall charger... or find another wizard to recharge your batt... or get one with at least 70% of charge.
mmm I dont know a lot of G4 devices but maybe you need to reinstall an official Rom like zabardast said but i dont know if its needed to remove the hard SPL ask zabardast maybe he knows.
HI ALL, i have a problem whit my xperia , it has spl 0.87 end i cant hardspl it. Some help plz? i try manual spl, hard spl but nothing worcks. PLZ HELP!!!
Moved to Q&A as not Rom Dev.
Are you sure you are connected correctly, EG, ActiveSync or WDDM connected, phone charged to 50% +? usally H-SPL works, what errors are you getting?
Thanks
yes, i do it befor on anader xperia but on this on dont worck, is brend new one! if i try to do it from pc the xperia enter boot loder end the loding bar apear but nothing hapen i let hem about 30 minutes end steel loding bar! on sd card enter boot loder spl 0.52 apeer but after same problem ! what is the problem a new type of spl from sony? or what?
Conection is ok i try to upgrade the firmware from sony it worck end i use the RUU whit an original firmware end it worck!
I found the problem if you have spl 0.87... the hard spl by usb dont worck but you cand do this: find a card 1-2 gb (i try 8 end 16 gb dont worck i dont know why). Format the card end put only manual spl on it end the image of hard spl from hard spl but renam it Kovsimg.mbh. Then run spl manual, the phone will restart end start in bootloder after theat the image will start too loading after the phone loade end update the spl phone will restart (on the phone restart take out the card) if you dont take the card the proces will repet it sealf.For me it worck this way!!!(after theat update your firmware whit what you want, good luck!!!
Great
Thread closed as you solved your problem
Badwolve1