Related
a while ago, i was rom jumping left and right and i came across an app called Phone Prioritizer app.
i really liked this app, even though i wasnt sure it did anything..
i was reading about it and it says it makes sure your incoming calls dont mess up or lag or anything..
i forgot which rom had it... but would there possibly be an .apk of this app because i am currently running cyanogens latest 4.2.13 with the Darkstar theme and it doesnt have it.
sorry if this went in the wrong section btw...
It is in KINGXKX v2.3 I am using now... I was looking it up to see what it did too.
i would love this as my phone randomly sometimes takes forever to get to the dialer.
I wrote the phone prioritizer app.
It started off being called phone renicer then script scheduler. It actually installs as phone prioritizer in the app drawer for all versions.
Older versions are here when it was called phone renicer:
http://forum.xda-developers.com/showpost.php?p=4493992&postcount=126
Newer versions are here:
http://forum.xda-developers.com/showthread.php?t=558822
The older versions were simpler to use.
The newer version allowed you to schedule any scripts you want by placing them in a specific folder on the sdcard. Sample scripts are in the zip file including the phone prioritizing scripts.
sweet, thanks jinx! mad props for this app. incoming phonecalls no longer lag
xaisomboun said:
sweet, thanks jinx! mad props for this app. incoming phonecalls no longer lag
Click to expand...
Click to collapse
What priorities did you set to get no lag on incoming calls. I tried it with the default priorities (in the included txt files) but it seemed to make no difference.
Thanks
Andy
Have this been included in any ROM out there?
I'm running xROM 2.0 by JAC and have already heard the fastest ring. Afraid if I install it it would mess up things and slow down...
Thanks!
It changed the priority of the phone higher than all other running apps.
Mike Taylor was the originator of the code to do rhis.
My program just periodically reset it since it liked to revert occasionally.
This seemed to work extremely well with the roms that were out when this was written.
I don't have a g1 anymore so I can't say how well it works now.
There was a script in the thread with the older versions that would allow you to verify the phone's priority.
awicks said:
What priorities did you set to get no lag on incoming calls. I tried it with the default priorities (in the included txt files) but it seemed to make no difference.
Thanks
Andy
Click to expand...
Click to collapse
i set it to default and it works fine for me
It works for me using the default settings.
Thanks to all concerned.
Still found a use for this on My g2x
This is a build I put together yesterday... It's basically stock ROM with the bloatware removed along with most sense elements... I'm working on a more pure vanilla, but builds thus far are really unstable. This build has been stable on my phone- with the exception of Rosie Utility FC at startup that I can't figure out since Rosie is gone. Wifi tether is enabled, google apps are included, su and busybox are installed and working, and I'm using launcher2 for now. Try it out and see what you think- nothing special, but it's something to play with until the pros release something great...
link removed- see http://forum.xda-developers.com/showthread.php?t=713316 for newest work...
I am getting major force closes on every thing when it boots up. Am I doing anything wrong. The only ROM I can get to work is the cyan test rom.
Acore is one of the force close but there are many when it boots.
did you wipe before install? I haven't had these problems... so it's hard to tell you what's going on- sorry it's not working for you though...
I did do a wipe but not sure if I am doing it right. It does seem like it is installing both roms. What is the best way to wipe?
In clockwork recovery select wipe data/factory reset... then wipe cache partition.
Yeah I finally got to wipe. Thanks for the help
Any chance you will get a version of this with the stock android dialer and phone.apk (i.e. like the Nexus One)?
That's where I'm headed eventually... I'm trying to figure out how to get nexus over to the inc, but the gsm/cdma thing is busting my ass... So far I have it loading with working hardware, but it won't join the damn network...
DobbsianYeti said:
This is a build I put together yesterday... It's basically stock ROM with the bloatware removed along with most sense elements... I'm working on a more pure vanilla, but builds thus far are really unstable. This build has been stable on my phone- with the exception of Rosie Utility FC at startup that I can't figure out since Rosie is gone. Wifi tether is enabled, google apps are included, su and busybox are installed and working, and I'm using launcher2 for now. Try it out and see what you think- nothing special, but it's something to play with until the pros release something great...
Click to expand...
Click to collapse
just to help out, from experimenting with rom building myself i came across this:
Search the XDA-developers forum for "Safely remove Rosie.apk on FreshToast 1.1?" (I cannot post a link because its a new account sorry)
its meant for the HTC Hero BUT it explains that you want to get rid of HtcAddProgramWidget.apk to make that FC go away.
the question is will that break anything, try it and find out
I flashed your rom and saw the FC then "rm HtcAddProgramWidget.*" and the FC went away in the setup process. idk if it breaks anything else when you actually use the phone though. good luck!
mechinn said:
just to help out, from experimenting with rom building myself i came across this:
Search the XDA-developers forum for "Safely remove Rosie.apk on FreshToast 1.1?" (I cannot post a link because its a new account sorry)
its meant for the HTC Hero BUT it explains that you want to get rid of HtcAddProgramWidget.apk to make that FC go away.
the question is will that break anything, try it and find out
I flashed your rom and saw the FC then "rm HtcAddProgramWidget.*" and the FC went away in the setup process. idk if it breaks anything else when you actually use the phone though. good luck!
Click to expand...
Click to collapse
Nice- thanks for the help...
I'd like to see a stock dialer work with verizon to troubleshoot an issue.
A weird issue which not many people have seemed to mention is the fact that you can't make multiple calls with Verizon. Perhaps its a verizon limitation? I am new to verizon so I am not sure.. When I mean make multiple calls, all you can do with the stock incredible is place a call, add a call and then conference it. You cannot put your first call on hold, make a second call and then go back to the first call. The phone app will only allow you to conference it. Also when you hit end calls its ends both calls..
The EVO does not have this problem, but it being on sprint perhaps they support it.. As both are CDMA networks I believe it should work with the incredible?
I would love a senseless rom with the stock android dialer. I would be ok with sense but the sense dialer is a pos. i just hate it.
If you have something like Dialer One installed, it's actually ok to delete HtcDialer.apk and HtcDialer.odex from /system/app. You can say goodbye to the Sense dialer. Even if you still use the Sense launcher, when you press Phone it will bring up Dialer One and will not fc on you.
I finally put together a stock nexus rom for the Inc, but I'm having the same issues as the cyanogenmod... says TCDMA64 at the top and the damn camera won't work... does anybody know how to properly deodex the stock apps from the Inc.? Try as I might I can't get it to work...
On a brighter note- it's fast, and light... just won't take pictures...
I use this Phone.apk because i like the layout. I prefer it so much over the standard one, which is included in cm5.0.8 final (and 6 now). It was included once in 5.0.8test3 as far as i remember but was changed finally. Why?
So, anyone knows what version this is and where i maybe get a more recent version of it (doesn't work in cm6 for me)?
Thanks!
idk how it is in the g1 cm6 but in the cdma hero cm6 its included.
Ah - so it's a hero phone apk!?
Thanks for your hint - will have a look for it!
It's the full eclair dialer and it was removed because the G1 does not have a proximity sensor, so too many people complained about their faces hitting the hold button at the top. For a while in CM5, you could select either, but that seems gone as well.
It's still in CM5 and CM6.
Settings > Call Settings > Force Touch Keyboard.
Mine's grayed out with it checked for some reason but it works.
Sleeepy2 said:
It's still in CM5 and CM6.
Settings > Call Settings > Force Touch Keyboard.
Mine's grayed out with it checked for some reason but it works.
Click to expand...
Click to collapse
^^^this
i have it running fine on my dream with Cy6
Well, i knew this option, but never tried it..
At least i don't have to push this apk everytime from now on. Unfortunately CM6 doesn't run stable enough for me on my MyTouch...
Thanks!
hudl said:
I use this Phone.apk because i like the layout. I prefer it so much over the standard one, which is included in cm5.0.8 final (and 6 now). It was included once in 5.0.8test3 as far as i remember but was changed finally. Why?
So, anyone knows what version this is and where i maybe get a more recent version of it (doesn't work in cm6 for me)?
Thanks!
Click to expand...
Click to collapse
This is the phone app in 508. Go to Settings\Call Settings\ click the check box "In-call touch UI". You can even reverse which side the keyboard button is by checking the "Left-hand mode"
Anyone know what happened to the ability to slide to answer? The phone.apk had two slide bars (like the lock screen) to answer, and mute a call. However this feature was removed. Anyone know why/how to use it again?
Does anyone know if this has been backported to donut anywhere? And if so, can you point me in the right direction?
tehseano said:
Anyone know what happened to the ability to slide to answer? The phone.apk had two slide bars (like the lock screen) to answer, and mute a call. However this feature was removed. Anyone know why/how to use it again?
Click to expand...
Click to collapse
Still works for me on 5.0.8
aa
aa
Wonderful job
dzo, incubus26jc, kallt_kaffe are the leaders.
Not to forget OTHERS and you as well th3lolz who make things easier.
I wished this was here when it was there, but this is now and that was then.
This will really help the ones without browsing/data plans. Great contribution!
is the link broken ?
edit : probably its just my connection, still can't download it.
aa
Thanks, this is great
its so clean without the unnecessary icons and more space for other apps
EDIT: One question, I tried out Flex dialer and i cant seem to get it to work, I just get an "I'm sorry" error when it dials my voice number.
aa
th3lolz said:
Yeah I had the same problem, go to the flex dialer configuration settings, and change the dial pattern from "A,B,2,C#" to "A,p,B,2,C#"
It no longer gives the "I'm sorry" error and works great for outgoing calls
I'll add it to the OP too to make it easier in the future, I thought that it was just me.
Click to expand...
Click to collapse
Thanks, That worked great
Hi, I installed this last night, but for whenever my phone is in sleep mode, it keeps randomly rebooting. Is there a way to stop this?
aa
th3lolz said:
Hmm... I've never had that happen before
Which nbh are you using?
Click to expand...
Click to collapse
This one voguimg-240x320-froyo-26-07-10.nbh from here: it029000.massey.ac.nz/vogue/files/?C=M;O=D
aa
hi
I have htc elf
I want to know that can I install it on my phone or not ?
tnx
aa
This is nice...
I just installed in my vogue, and all work as well.
Camera work fine, with the setting pop-up when i touch the icon, except for zoom function, if i touch it, camera would stop.
With task killer, i see 2 running services that usually not show up in other build.
"android keyboard" and "pl.magot.vet..."
does it took a lot of memory ?
it won't close at all..
EDIT : it's ancal process, can i uninstall it as well as GPS test, because my vogue doesnt have GPS.
Hope would be more performance improvement with next release, and might be some black theme as default...
Btw, eclair + no data plan and app replacement would be nice to have.
Thank you th3lolz for this build,
i think i will keep it run it my vogue untill there's a new release with more light build.
Here's another one, while the screen locked, signal bar would present the actual signal of the phone, when you unlocked it, the signal bar would drop, but looks like it doesnt effect when i making a call.
Is there a way to get Incubus26Jc's Darkstar theme without having to install the his androidinstall.tar? They have all the other theme's androidupdate, but none for the ROM's theme. >.<
Ahiko said:
Is there a way to get Incubus26Jc's Darkstar theme without having to install the his androidinstall.tar? They have all the other theme's androidupdate, but none for the ROM's theme. >.<
Click to expand...
Click to collapse
You could try to unpack the androidupdate.tar and your android ROM you like, find the different, do some adjustment script, and repackage it again. I think you could use some different theme for your android....
th3lolz,
with this build, i got a lot of missed call, the screen doesn't wake up for incoming call. i hope this will fixed soon.
aa
th3lolz said:
Did you try Incubus' build? - I'm pretty sure I didn't remove anything that would cause that
Click to expand...
Click to collapse
Yes, i already try all the android from all dev;
all incubus android, all myn's android, also dzo and Kallt_Kaffe, and i prefer to choose your build for my daily use.
With incubus' build, it also happen, and all things more slower then your build, and i prefer to choose not using rogue tools for more battery life.
With your build there's no need to use rogue tools.
And more clean from unused apps and more responsive when i push some button ( -menu, dialer, home, etc ... )
Sorry if i ask you too much...
and thanks for your support...
Hello,
I have been using CM for the last months, and now that the stock froyo rom is here with sense, I was decided to give it a try.
One of the things I have gotten used to in CM is the power control widget with 2G/3G options. I feel like I cant live without that right now, so I am trying to get it back. Has someone being able to do this?
I donwloaded the mod from here, and flash it using rom manager:
http://forum.cyanogenmod.com/topic/3625-new-power-control-widget-with-one-click-2g3g-toggling/
But no luck, after restarting androud would freeze up after 5 seconds.
Any help? Thank youi!
ykcorse said:
Hello,
I have been using CM for the last months, and now that the stock froyo rom is here with sense, I was decided to give it a try.
One of the things I have gotten used to in CM is the power control widget with 2G/3G options. I feel like I cant live without that right now, so I am trying to get it back. Has someone being able to do this?
I donwloaded the mod from here, and flash it using rom manager:
http://forum.cyanogenmod.com/topic/3625-new-power-control-widget-with-one-click-2g3g-toggling/
But no luck, after restarting androud would freeze up after 5 seconds.
Any help? Thank youi!
Click to expand...
Click to collapse
I'm thinkin the same thing. Guess they have to sort out a new and updated app.
It isn't just that simple... guys at CM modified phone and settings apk for this to work... you can't just replace those two files here in stock FroYo! There are many dependencies. Besides you would at least have to deodex stock ROM but that's just the beginning...
I suspect it needs APIs only present in cyanogenmod. But, perhaps if the API for toggling 3G is discovered (it must be there as there's a HTC widget for this), one could modify the default power control widget.
You mean API call? I doubt that stock HTC ROM has that. Does AOSP have it? From the original author in CM thread you can see that he was waiting for Google to implement that call but they weren't so he modified settings.apk and phone.apk to allow that call...
BlaY0 said:
You mean API call? I doubt that stock HTC ROM has that. Does AOSP have it? From the original author in CM thread you can see that he was waiting for Google to implement that call but they weren't so he modified settings.apk and phone.apk to allow that call...
Click to expand...
Click to collapse
The HTC ROM must have it (or something similar), since it has a widget for 3G enable/disable. Whether it's accesible or hidden is a different question. And AOSP doesn't have it, obviously.
kugel. said:
The HTC ROM must have it (or something similar), since it has a widget for 3G enable/disable. Whether it's accesible or hidden is a different question. And AOSP doesn't have it, obviously.
Click to expand...
Click to collapse
The call might have the same name, but it calls different aspects of setting. Only that way the same software would produce two different results using the same action on two different ROMs (namely CM and stock HTC). This sounds logical.
Google "switchpro" it is just like the CM froyo power widget but more customizable.
And then what?
We know those widgets but we are talking here that they don't produce the same result on different ROMs... namely CM and stock HTC's.
kugel. said:
The HTC ROM must have it (or something similar), since it has a widget for 3G enable/disable. Whether it's accesible or hidden is a different question. And AOSP doesn't have it, obviously.
Click to expand...
Click to collapse
Where is that widget? does it really switch from 3G to 2G in one click?
burtonseven said:
Google "switchpro" it is just like the CM froyo power widget but more customizable.
Click to expand...
Click to collapse
I tried it, but when you clicked on the 2G/3G switch icon it takes you the settings, it does not switch in one click, not as good as CM power control widget