Can anyone help me finding USBToPCPopUp or simmilar application (asks you if you wish disk or activesync when you connect to USB) in cab/exe for X1 stock rom?
Try one of the two cabs inside. Works for me on my Xperia. Don`t forget softreset after instal.
Thank you!
Related
I installed the "o2_connect_iis.cab" file in my WM5. I use unloacker to get it from Extened ROM folder when I still used WM2003SE.
But When I start it, it informed that "O2 connect application is designed for O2 devices, which can't run on other devices". Is there anyone know how to fix it ?
The Autoconfig also not come with the WM5. How to install it to WM5? I have seen a lot of cab in Extended ROM folder about Autoconfig. I must travel around the world, so it is convinient to me to have this autoconfig. Please help me
for those who use an Qtek 9100 (MDA vario etc.etc) plz try this tool
this tool should be used by any PPC user youll get a smal icon in the launcher wich makes you able to swich between ActiveSync and just memorystick drivers
wich means you can just connect your ppc to any pc (even a mac) and it would been recognized as an usb stick(mass storage device)
plz help the makers debug the tool as they say it should work on the qtek 9100 altough if i try it gets stuck after installing the mass storage driver on my xp machine it just doesnt activate the device in the device manager
maybe we could all follow pewe and post our problems on
http://www.softick-forum.com/viewtopic.php?p=102#102
anyone who would get it to work plz post all info (rom version etc.etc.)
It's working in my device
I have it working without problems.
My device:
ROM: 1.3.7.5. ESN in Spanish
Radio: 01.12.10
Protocol: 4.0.13.23
ExtROM: 1.3.7.105
Cardexport II v2.11b
It's working on mine with no problems as well but I'm using v2.11b, when i use the latest v2.12(edit from 2.21 to 2.12) the USB mode doesn't work.
Imate K-Jam Rom 2.16.9.1WWE
you can use another program called WM5Storage found at
http://www.modaco.com/WM5torage-t238545.html
The latest CardExport (2.12 IMHO) don't work on Wizard. Previous 2.11 acts perfectly.
used it on qtek, tmo, and jam images
greetz
Hi, i had some problem with card export, sometimes it works, after not, a reboot, it works..., but with wm5storage, all is OK and it is free !
Qtek 9100 French rom 2.17
Check out the new v2.15, works perfect with the latest Qtek ROM.
Only thing you have to do after installing is soft-reset, go the the Preferences of the app and under the tab Hardware select "Alt init order" and "Use dumb endpoint" and offcourse switch it to Card Export
Can't Remove Windows WM5Storage
I tried installing this and it put itself inside the accessories folder. It didn't work with my MDA and I tried removing it using Add/Remove programs but it didn't work, the folder is still there. I tried to reinstall it and now I have 2 folders. LOL, how do I get this thing deleted out of my MDA!
Hi,
I bought a Diamond 2 weeks ago in French (v1.37.406.1 FRE) and I started to install .cab applications.
I tried to install :
S2U2 (1.05)
S2V
ESET NOD32 (on official site for PPC)
PHM
psshutxp
Advanced config (the link of XDA)
CorePlayer
none have been installed. The error message is :
The installation of "the_cab" has failed
Click to expand...
Click to collapse
So I do an Hard Reset and I was able to install :
S2U2 (but not the link of XDA)
S2V
PHM (not in the official website)
psshutxp
Advanced config (not the link of XDA)
but not CorePlayer and ESET
So I do an Hard Reset again but after nothing works
I do 2 Hard Reset again and I flashed my original french rom for the french rom in this topic : http://forum.xda-developers.com/showpost.php?p=2344831&postcount=42
the original.
And doesn't work
Where is the problem ?
Thx
nobody ??!?
You sure you have enough free memory to install those programs??.
I have same problem... have several programs that just dont get installed for unknown reason and it is even I chose flashcard also...
try updating ROMs, 1.37 is nutoriously slow anyway so that would definately help in terms of speed, and maybe its a bug on your ROM and you'll kill two birds with one stone, worth a try seeing as you've hard reset and lost your data anyway
I just uploaded all the apps using ActiveSync and it all works... Can someone explain why with USB drive it will copy but not work as it should?
Can we test it somehow?
Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.
buffystar said:
Did you still have the Diamond connected to PC and acting as a Hard drive if so there was your problem. When it is connected as a hard drive the Diamond will not see the WM device therefore when you are trying to install the program(Cab File) will not be able to install its reg settings to windows. I always disconnect my Diamond from PC after transferring Cab.
Click to expand...
Click to collapse
No no... sure I run CAB from the phone after I disconnected... I just upladed this via USB drive and it was making errors (just not working) but If I did same via ActiveSync it is working.
Can you explain this?
After a small crash this morning, my diamond won't load the TF3D interface anymore . There was a problem with SpoonAlarm (alarm app). Tried to soft reset it several times and removed the battery. As a workaround I've chosen another theme and temporarily disabled TF3D.
It seems that manila.exe disappeared from my Windows directory!
Is this familiar to one of you guys?
I haven't tried a hard reset yet, as this will erase my settings.
Config:
ROM: Elite 3.0 WWE
Radio: 1.00.25.05
Prot: 52.29.25.12H
wdejong said:
After a small crash this morning, my diamond won't load the TF3D interface anymore . There was a problem with SpoonAlarm (alarm app). Tried to soft reset it several times and removed the battery. As a workaround I've chosen another theme and temporarily disabled TF3D.
It seems that manila.exe disappeared from my Windows directory!
Is this familiar to one of you guys?
I haven't tried a hard reset yet, as this will erase my settings.
Config:
ROM: Elite 3.0 WWE
Radio: 1.00.25.05
Prot: 52.29.25.12H
Click to expand...
Click to collapse
Hi...
I don't think u need a hard reset....
I don't know what's append to your TF3D or files...
But I'm pretty sure that manila.exe is still there ...
Is 'Elite 3.0 WWE' ROM with TF3D in the ROM?
can u uninstall TF3D or is it IN the ROM files...?
If it's in the ROM files..
try this...
install Total Commander...
use it to do a search for all _manila files
delete them!
do a search for manila.exe also and delete the file...
Don't worry...
Now your original manila files will be there..
and TF3D should work ....
Although TotalCMD wasn't able to delete all the files, it was able to remove some of the _manila files. After enabling TF3D via the "Today" app in "System" it worked instantly.
Thanks, problem solved.
what do you call the bar of alphabet on the right side which appears when your scroll thorugh a big list.....???
сan any one point out the links to cabs to install it???
any recommendation for the cleanest rom for HTC TYTN II ??
ps: recently after flashing to new rom....notice that it's not included.....
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
how to render a card reader????
McHale said:
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
Click to expand...
Click to collapse
thanks for the fast reply!!
i'm using hyperdragon lite rom now....
how ever somehow softick card export is not working....
my pc kept on installing the driver for it for the first connection....
after some time kaiser hang......
and on second connection the pc show that it is connected.....but i can't explore the sd card cos there's no link from my computer .....
normally i would search for autorun.....but after rom update to hyperdragon it stopped working.....
still trying the search to look for fix...........
anyone??????
ps : w5storage not working tooo....
only hope at the moment....pocket controller through the file browser option???
this is really a pain!!! cos i don't have a card reader......
active sync could do some transfer but it's slow and limitation with the file size.......
edit: some one pointed out that in order to use card export, a usb2pc.exe file need to be in the /windows folder.....
anyone can kindly verify this????
or please kindaly upload a copy of that file so that i can try it my self......
(no rapidshare or megaupload servers.....they don't work for me)