Hi can somebody tell me a radio rom which is for german cards like a vodafone card. I had the problem that i can not turn the phone on by every rom that i flashed. I had use the 1.17.25.26W and the 1.09.25.14 but both does not work
Have you installed the correct rilphone.dll? Is it Simlocked?
rilphnone.dll? what is this an where can i find it? It isn't simlocked
There is a radio thread why not use it???
crose1990 said:
Hi can somebody tell me a radio rom which is for german cards like a vodafone card. I had the problem that i can not turn the phone on by every rom that i flashed. I had use the 1.17.25.26W and the 1.09.25.14 but both does not work
Click to expand...
Click to collapse
are you using a WM 6.5 ROM? and, did you flash HardSPL (1.56 OliNex) to your device before flashing? not being able to turn the phone on with "every ROM you flashed" suggests that you have the wrong SPL (e.g., have not used HardSPL or USPL to prep your device before flashing).
I had used Hardslp 1.56 before flashing
I'm assuming from above post that HSPL 1.56 was successfully flashed then? Did you check SPL?
You can find rilphone for each radio in radio thread (which is where you should have posted your query!)
Please post further queries in that thread
Ta
Related
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!
Hi,
I have upgraded my Orange SPV M700 (UK) shipped roms to the following:
SPL-1.30.Olipro
AX3L_OS v2.0.8.2
I may have mis-understood from the readme but I thought the updated radio was part of AX3L's rom update as when it completed everything was updated except the radio version (this still showed 1.30.00.01 in device info. the ROM shows 2.0.8.2).
So I updated just the Radio to version 1.46.00.11 and the flash process completed ok, however still it shows 1.30.00.01 in device information.....any idea how to fix this?
I followed the guides on
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Apart from the radio not showing the correct version everything else is fine, GPS, etc. does work but I did notice it seemed to get very warm at the back of the handset (can't remember it doing this before the upgrades).
Thanks for any help.
hrdspl 1.30 desn't upgrae radio. Get flash witouth go in bootloader
So, are you saying start the radio rom upgrade without going into bootloader? Just want to confirm as the guides state otherwise...
http://forum.xda-developers.com/showthread.php?t=316274 I download the radio here and upgraded only the radio. I got error text the first time i tried to flash but when phone go to bootloader flash,it again, works perfect!
here you find the 1.46.30.11 radio too
ketma said:
So, are you saying start the radio rom upgrade without going into bootloader? Just want to confirm as the guides state otherwise...
Click to expand...
Click to collapse
Yes. In that way you flash with sspl.
Thanks for both your replies, flashed ok and now updated with 1.46.30.11.
Cheers.
can i just re-emphasize that it's quite dangerous to flash radios without hard-spl, and not the kind of advice you want to be giving out on this forum. If you're so convinced it's the Hard-SPL, load a different hard-spl before you flash the radio.. SSPL isn't a good alternative as all it does it bypass CID check, not protect your device in case of a bad flash
Switch back to SPL-1.20.Olipro and you can flash radio roms.
yes, please follow the guides on the site, which now reflect the option of going back to old hard spl if 1.30 doesn't seem to be working.
it is not good advice to be handing out in the forum that people should flash radio without hard-spl. You guys are going to wind up responsible for a lot of noob bricks, and you're lucky you don't have one yourself
I´ve a HTC 3600 and installed Hard-SPL Olipro 1.20 then executed the application for releasing the Sim and CID restrictions of my HTC.
I keept the WM5 ROM and tested the device. The Sim is now unlocked, i suppose so is CID, how can I check this before installing a new cooked ROM?
My gps was working fine, now I can´t get gps signal, do I need a radio update? Which is recommended? Did the sim unlocking process downgraded my radio rom
ROM: 1.23.410.2
RADIO: 1.16.00.00
thanks in advance
you are right
Unlocking P3600 downgrades the radio...
Therefore you cannot use GPS until you upgrade the radio again.
Take a look here, http://trinityguides.info/index.php , choose a gps enabled radio and upgrade...
Thanks, I also thought that.
Which of the Radio Rom´s should I choose?
Radio 1.38.00.11
Radio 1.41.00.11
Radio 1.46.00.11/30.11
Radio 1.50.08.11
How I can I check if my CID was succesfully unlocked? I want to install a new ROM with a different language.
If you installed hard spl on your device, it doesn't matter if you have cid unlocked or not, cause hardspl let's you install any rom in any language.
As for the radio, it depend's on your carrier and the country you are in.
I see you are in Portugal so you can use the latest version (Radio 1.50.08.11), it works just fine for me.
Humm, I´ve read that the latest ROM cause mora battery drain than the others, is this true?
What improvements are present in the latest ROM´s compared to 1.38 ?
Guys,
I have currently Duttys HD 2.8 installed which is pretty perfect but my HD has problems with reception (drops call during calling, etc.). So I assume Hardware failure and need to go back to German Stock Rom.
The issue is now that there is no new German Romupdate yet and SPL is 1.14 (or 1.15).
How can I go back to this stock Rom. When I install it with SPL 1.56 it will not work I assume.
Any ideas?
cheers
chefffe
the german shipped rom should match your phone.
You shouldn't need anything except the shipped setup.
Have you tried it yet?
If you have Duttys V2.8, use USPL to flash to original stock rom
EDIT
More info can be found here
but will the installed SPL 1.56 work with an old german Rom (after Rom flash with using USPL 2.5)?
As far I understood old Rom need also old SPL Version?
you must have flashed back to spl 1.14 in order to install duttys rom. uspl is only temporarily for one flash procedure. you keep spl 1.14
so the only thing to do is to flash your stock rom. that´s all
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
chefffe said:
but will the installed SPL 1.56 work with an old german Rom (after Rom flash with using USPL 2.5)?
As far I understood old Rom need also old SPL Version?
Click to expand...
Click to collapse
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
chefffe said:
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
Click to expand...
Click to collapse
Are you sure the reception problems derive from the ROM? Maybe you have to try a different radio!
chefffe said:
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
Click to expand...
Click to collapse
When you flashed to Dutty's 2.8 you had to have an SPL v 1.14 and then install an original HTC 1.56 rom. During this process it upgraded your SPL to v 1.54. If you now want to downgrade to an older HTC German rom that is not based on SPL v 1.54 all you need to do is download said rom and install it after running USPL.
You can check this by placing your phone in the bootloader right now (turn it off. hold volume down button while pressing power on button). It should say SPL 1.54.0000. If it does then all you need to do is run USPL and then whatever rom you want to load. When you load the older stock German rom it will replace your current SPL with the one from that rom. I have yet to see an original / stock HTC rom that does not include the SPL in it. And if you check the Blackstone Wiki these are the instructions...
MAMeingast said:
Are you sure the reception problems derive from the ROM? Maybe you have to try a different radio!
Click to expand...
Click to collapse
Like MAMeingast said, have you tried flashing another radio? You should try running USPL and flashing the radio you were using before Dutty's 2.8 first in my opinion... and see how this works!
I tried 3 different Radios.
The very strange thing now is, that I flashed the new wwe update rom (with spl 1.56). Then it worked pretty normal. So I flashed back Duttys (because much better) and have the same problems again. I flashed now again back to wwe and for the last 4-5 hours I have normal reception ???
Thats really weird because I thought Dutty is using the same 1.13.25.24. or even more strange if the radio is not changed with his rom.
chefffe said:
I tried 3 different Radios.
The very strange thing now is, that I flashed the new wwe update rom (with spl 1.56). Then it worked pretty normal. So I flashed back Duttys (because much better) and have the same problems again. I flashed now again back to wwe and for the last 4-5 hours I have normal reception ???
Thats really weird because I thought Dutty is using the same 1.13.25.24. or even more strange if the radio is not changed with his rom.
Click to expand...
Click to collapse
Dutty's rom does not include the radio but it may be changing the rilphone.dll! I'm not sure. But it's still weird because if you flash the WWE 1.56 rom and then Dutty's all should be well and good.
I need to revert my last info. Also with the 1.56 wwe Stock Rom my Phone is not working properly. I tested now 6hours and it was several times not reachable although I had full reception. I think my HD is really broken .. **** ...
Therefore I need to install the old german stock Rom with SPL 1.14.
I still dont have a clue how to do that
chefffe said:
I need to revert my last info. Also with the 1.56 wwe Stock Rom my Phone is not working properly. I tested now 6hours and it was several times not reachable although I had full reception. I think my HD is really broken .. **** ...
Therefore I need to install the old german stock Rom with SPL 1.14.
I still dont have a clue how to do that
Click to expand...
Click to collapse
It's actually quite easy! Do you still have the stock German HTC ROM with SPL 1.14? If not, download it again. Put your phone in bootloader, run USPL, and load the stock German HTC rom. That's it! You can verify your SPL reverting back from 1.54 to 1.14 by going into the bootloader afterwards.
exactly thats it. I didnt thought that spl 1.14 is also included in this rom so I was a bit afraid. But I tried and it worked without problem. Thanks man ;-)
New HTC ROM update incl. german 14/4/09
Hi cheffe,
not 100% sure if this is what you're after?
http://www.htc.com/de/SupportViewNews.aspx?dl_id=537&news_id=142
I'll stick with English
chefffe said:
exactly thats it. I didnt thought that spl 1.14 is also included in this rom so I was a bit afraid. But I tried and it worked without problem. Thanks man ;-)
Click to expand...
Click to collapse
Very good, glad you hear you're back in business!
HTC lova said:
Hi cheffe,
not 100% sure if this is what you're after?
http://www.htc.com/de/SupportViewNews.aspx?dl_id=537&news_id=142
I'll stick with English
Click to expand...
Click to collapse
Hey ... were here in the HTC Touch HD Thread .. not Touch 3G ;-)
chefffe said:
Hey ... were here in the HTC Touch HD Thread .. not Touch 3G ;-)
Click to expand...
Click to collapse
I must have miscopypasted.. *cough*
Tschuldigung
chefffe said:
Guys,
I have currently Duttys HD 2.8 installed which is pretty perfect but my HD has problems with reception (drops call during calling, etc.). So I assume Hardware failure and need to go back to German Stock Rom.
cheers
chefffe
Click to expand...
Click to collapse
So your phone worked fine with the stock rom?
i´m with german e-plus provider and have to assume poor recepion qualities with my touch hd, either stock or custom rom / radio roms ...
only thing that helped was disabling 3g - back to 56k internet
So: did you reflash work? Phone usable again?
I've flashed Miri's ROM using USPL method so now SPL on my phone is 1.54. However, now I want to update my Radio as well to 1.10.
What I need to know is that do I need to do the same steps again which I did to USPL to 1.54 and then run CustomRUU file? Or is there another way to do it?
Also, when I go to bootloader mode, I see SPL as 1.54 but Serial doesn't change to USB.
5fifty5 said:
I've flashed Miri's ROM using USPL method so now SPL on my phone is 1.54. However, now I want to update my Radio as well to 1.10.
What I need to know is that do I need to do the same steps again which I did to USPL to 1.54 and then run CustomRUU file? Or is there another way to do it?
Also, when I go to bootloader mode, I see SPL as 1.54 but Serial doesn't change to USB.
Click to expand...
Click to collapse
You have to flash the radio rom in the same way you flashed your main rom.
Start in bootloader mode, connect to usb, run uspl and flash the rom using the CustomRUU tool.
If on your display it shows serial, you should look if you don't have a problem with your (Windows) drivers.
Iceberger said:
You have to flash the radio rom in the same way you flashed your main rom.
Start in bootloader mode, connect to usb, run uspl and flash the rom using the CustomRUU tool.
If on your display it shows serial, you should look if you don't have a problem with your (Windows) drivers.
Click to expand...
Click to collapse
That brings me to my next question which I believe is slightly daft: Does flashing the radio affect the ROM in any way or it simply flashes the radio & thats that?
5fifty5 said:
That brings me to my next question which I believe is slightly daft: Does flashing the radio affect the ROM in any way or it simply flashes the radio & thats that?
Click to expand...
Click to collapse
Radio only.
In a stock rom you find them both. Most of the chefs don’t add the radio part to their roms, then your radio rom you had, stays unchanged.
Flashing roms and radio's are separate unless a chef includes a radio in his/her rom. Flashing a radio will not affect your rom and vice versa. Both are flashed by using same method, i.e. either using USPL or HSPL
Thread queries answered, thread closed. In future ask query in existing thread, i.e. flashing issues in flashing guide thread and radio issues in radio thread
Thread closed