Bought a new in box white Rogers HTC Dream, from someone who had an extra. Having owned a Dash, TyTN and Diamond before, I knew I wanted to flash a custom ROM, but was not familiar with Android.
I searched Google and came across this: http://www.maximumpc.com/article/howtos/howto_hack_your_android_g1_phone?page=0,0
This turned out to be a really bad guide for me. I found out Rogers phones require special attention AFTER I bricked my phone, and now I'm stuck on the Rogers logo with no access to Fastboot or Recovery Mode. In the linked guide, I flashed the recovery image and booted into Recovery Mode. I then selected the update.zip radio file I downloaded and flashed it, finishing the process with Home+Back to reboot my device, winding up where I am now. Is there any hope for me, since it's just a radio and not an SPL? If not, do you think rogers might do something? I still have the retail box and everything, it just wasn't purchased on my account.
Thanks in advance for any help!
eeesh...Flashing the wrong radio is NEVER good...There might...might be a chance to fix. I'd search the forums for the word "Brick" and see what you can find there is a lot of threads on the subject. I recall reading something about a warranty of sorts offered by HTC, you could look into that as well.
you can TRY this, but im not sure if it will work (like 1% chance maybe, but this guy also had rogers)
http://forum.xda-developers.com/showthread.php?t=568938
if that doesnt work, then idk how to help you.... rogers have a different radio than the regular g1..i think if you flashed 26I, you maybe ok.. but then again idk
please post your results here back
PS: thats the same article that pissed cyanogen off lol
Thanks for the link, I'd actually already found and tried that myself. I guess you can put that thread to rest now, as I am in the exact same situation. His described steps, including any and all variations I could think of, did nothing for my poor Dream. I'd have to say the OP in that thread did indeed have only a semi-brick with some other extenuating circumstances.
Anyways, I got in contact with the one who sold me the phone and we successfully switched the ownership and IMEI over to my Rogers account, so now the phone is registered to me and I have full warranty. As the phone is older than 30 days old a factory refurbished Dream is in the mail and should arrive sometime next week with a return package for the recently deceased.
This time I'm going to make sure to root/flash the phone properly, with this guide: http://forum.xda-developers.com/showthread.php?p=4280573#post4280573 (or the linked guide depending on SPL version...)
Once that's done, do I need a specific ROM too? I've read about 3G problems on the Rogers network with some ROM's...
Thanks for your help!
Related
Sometime between flashing JacHEROski1.6r3cc(from twitter. Really slow by the way, needs tweaking) AND Cyan's 4.0.4 my G1 has decided that wifi doesn't need to work anymore.
I've tried several roms since I realized it wasn't able to turn on to try and get it working. I've also search Q&A and Dream Development looking for anyone or anything on the issue with no result.
I've reflashed the radio and spl and even had no luck with getting it to work on JF1.51 ADP. I'm stumped and would like to get it working.
I'm sorry in advance if this thread is uncalled for. Delete it if you must, but after 3 days of searching and requesting help from fellow xda peeps I am still without a fix.
Roms I've flashed since the problem
Jacheroski's
1.6r2 a & b
Cyan's
4.0.3
4.0.4
4.1.1
Jacxrom
1.4r2
1.4r3
JF
1.51 ADP
Twisted's
4.5r3
All with the same result "unable to start WIFI"
Edit: 8/31/09
Okay so after calling T-mobile's PDA tech support I've found out that this issue has warrant for replacement. It is a know issue with their latest update. Before they could send me out a replacement I had to check the color indicator circle to make sure it is white (which it is) and give the my G1's IMEI # which I did located under the battery. I am now waiting for a replacement which should arrive in a week. SO Yeah!!! I wasn't able to change the color though (the bronze has a hard to read slide out keyboard is dim light) and I guess my battery warranty was up in July = [
I have a few days left before I have to send it in. Does anybody want any info off my device before I return it? Like logs etc. Just pm me.
Mod thanks for not closing this thread right away = ]
Mod okay to close = ]
yourtravelboy said:
Sometime between flashing JacHEROski1.6r3cc(from twitter. Really slow by the way, needs tweaking) AND Cyan's 4.0.4 my G1 has decided that wifi doesn't need to work anymore.
I've tried several roms since I realized it wasn't able to turn on to try and get it working. I've also search Q&A and Dream Development looking for anyone or anything on the issue with no result.
I've reflashed the radio and spl and even had no luck with getting it to work on JF1.51 ADP. I'm stumped and would like to get it working.
I'm sorry in advance if this thread is uncalled for. Delete it if you must, but after 3 days of searching and requesting help from fellow xda peeps I am still without a fix.
Roms I've flashed since the problem
Jacheroski's
1.6r2 a & b
Cyan's
4.0.3
4.0.4
4.1.1
Jacxrom
1.4r2
1.4r3
JF
1.51 ADP
Twisted's
4.5r3
All with the same result "unable to start WIFI"
Click to expand...
Click to collapse
Huh... well... I hate to say it... but it may be a hardware issue. Sorry. If you wipe and flash your rom then it should start up. Or maybe it could be your access point (if it's an 802.11a or something).
you may want to hit me for saying this, but if you can't get a wipe/flashing fix, try going back to rc-29 and finding the stock 1.5 update (someone has it in their sig i just can't recall right now, sorry). and see if it will work in a stock build. if it doesn't then it is a hardware problem and your phone will be back at stock so you can call for help. if it does work on stock though, since you have already rooted your phone before i have an easy to follow guide to get you back to the latest and greatest cyanogen mod from stock in my sig
hope this is of some help
definitely try what binary100100 posted above me first though.
I'll try R29. I am rooted. I can su in terminal in all the roms accept Cyan's 4.1.1 (theres something weird with it) So my plan is to flash to an Official T-mobile rom and call for tech support. is there anything I need to know before I call tomorrow?
yourtravelboy said:
I'll try R29. I am rooted. I can su in terminal in all the roms accept Cyan's 4.1.1 (theres something weird with it) So my plan is to flash to an Official T-mobile rom and call for tech support. is there anything I need to know before I call tomorrow?
Click to expand...
Click to collapse
do not mention ANYTHING about rooting, flashing, recovery, anything technical at all. the dumber you sound the better.
Thanks for the advice. I will post my findings tomorrow.
Have you looked thru your kernel log (dmesg) for any error messages that might show up when you attempt to turn on your wireless radio? I'd check there first and post back.
Hey guys its been a while since I've even tried to fix my phone cause everyone was saying its dead. But I've been reading stories of people coming back from the G1 logo. So i could really use your help.
Heres the problem, A while back I dropped my old G1 and had to get a new one. Upon looking for the video I used last time to root my phone, I couldn't find it. I searched high and low but to no avail. I figured any video would work as long as it rooted me. So I started up the video. however once i was "done" with it i noticed nothing had changed. So i figured the video was garbage and found another one and started it up. I know, STUPID. Well when i booted my phone after wiping and flashing. It stayed on the G1 logo. I knew the worst had happened. So now i don't know what to do. There have been one or two occasions that I've gotten it to boot loader. So i know i can get there. but what do i do when I get it?
Also, no, I never got to flashing raido's or anything like that. I thought I wasn't rooted so i didn't move on.
I know it was long but I'm getting all the info out there. Please help, I think its possible, and if it is I want my phone back!!!
What were you installing by the way?
EDIT: Made a mistake, thought you were able to boot into recovery.
He does not get to recovery, but into bootloader mode (cam + power on). This is good, as there is a good chance to recover from that.
Try the first section of this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
You have to flash the correct dreamimg.nbh via bootloader. You might need a Goldcard to do so, in certain countries, but lets just hope that is not the case (would be more work...)
€: Some more Info on Bricking your device with Radio/SPL updates, so take care: http://forum.xda-developers.com/showthread.php?t=655097
The guide on cyanogens wiki is considered dangerous at the optional update to HardSPL
Hey guys, please forgive me if I misuse my terminology here but I am still a padawan learner.
My wife's hero is rooted and running a cyanogen rom. All was well for months but now her usb plug is broken and NOT charging. I have not yet verified that the usb won't talk to the pc but I assume it's the case because I can't get the thing to charge. Of course i have tried 5 or 6 diff chargers, tried wiggling, etc. but i am convinced that there is a broken prong in the phones plug. The phone is under warranty for 2 more days but I understand that I need to flash it back to stock before trying warranty stuff.
I have searched and the answers I have found are to simply run the latest RUU from the htc website. I found it, no problem, but it is an .exe file and would require the usb to work, right? The phone is dead right now or i would test the usb>pc connection and I have arranged to briefly borrow a friend's battery later tonight. If i can't get the connection to work is there any other way to flash this thing back to stock? If I just download a stock rom and flash that then i will still be rooted right? Do they check that? and lastly what about running an OTA update? Any advice/ideas are greatly appreciated.
Come to think of it, I might have the original naandroid backup that i did of the phone back in the day. If i restore this, would it go back to stock?
Here's what you can do:
Go HERE and download the S-OFF bootloader.
Flash it
Download THIS - its the zip that gets uploaded/flashed when you run the RUU.
And..as per instructions on that page:
Simply rename this to HERCIMG.zip and place on the root of your SDCard.
Power your phone completely off.
Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
After it flashes you'll have a stock phone, with the stock bootloader
Its the same setup I have on my phone..Just in case I need to un-root on the fly Except I have two zips. One with the stock bootloader and one without so I can keep it unlocked.
Gotta love XDA, thanks so much. I may have found it if I had thought about searching for "stock sprint zip format". Hopefully the next guy will find this. I have been helped by your advice many times throughout the forums in my searches.
drumstyk1 said:
Gotta love XDA, thanks so much. I may have found it if I had thought about searching for "stock sprint zip format". Hopefully the next guy will find this. I have been helped by your advice many times throughout the forums in my searches.
Click to expand...
Click to collapse
You should add "or computer" to the title as well For those that may search 'unrooting without a computer'
And you're welcome that's why I'm here
Not working (yet)
Hi, another noob here: SAKKA.
I also need to revert to stock. I already switched the phone number (just upgraded and giving Hero to daughter). So have to push everything from Mac via USB. Unable to d/l md5sum: a77a2dee8e903e8f1a18b28b5c5e0b40 b/c it won't connect (too old?) Have HERC in root, did steps 1-4. But no go. Is there someway I can chat and get some help? Or do you know where i can chat now that AOSP is no longer running an online chat room (as far as I know)?
do u have any idea how old this thread is
Oh.
D'oh. Thanks.
That being said. Know how I can find someone to talk me through this?
sethfriedman said:
Oh.
D'oh. Thanks.
That being said. Know how I can find someone to talk me through this?
Click to expand...
Click to collapse
There is this help page :
http://forum.xda-developers.com/showthread.php?p=13479613
I always unroot with this:
http://forum.xda-developers.com/showthread.php?p=8551240
Then I root with the "one click method"
http://forum.xda-developers.com/showthread.php?t=743289
Both never fail me....
Good luck
V's CDMA Hero
V's CDMA Hero
i tried this! it was on the updating part and when it was almost done, the htc screen appear and it started all over with s-off. so it said fail.
Just curious, if phone is already activated to her # then why go back to horrible stock.
If u want a stock ROM flash liquid sense or nfx.
http://forum.xda-developers.com/forumdisplay.php?f=643
From either of those two ROMs u can do all that stock can.. like activation, PRL updates, etc.....
So unless its going for service under warranty there is no need to unroot to stock.
Good luck
V's CDMA Hero
Hello
I hope i have posted in the right section and someone can explain too me if this is right or wrong.
I just downloaded the 2.0 version of samsung kies software,when i plugged my phone in it said i could do a firmware upgrade for my phone.
So of course i did so,i first done the backup which was an option in the process.Then pressed ok and it started doing its thing.
Well i left it and came back too see a green android guy on the phone and a message on laptop saying the update had failed and i need too recover the fail by going into emergency firmware recovery mode.
I did this(pressed yes) and it started doing its thing again and rebooted the phone,after it had done it said too disconnect and reconnect my usb cable which i did and the phone was back running again.
The question i have is what basically just happened?
I presume it was a fail on the firmware update since thats what it told me but on checking my stats it had done what it said it was going too and thats upgrade from CSC: JP5 to CSC: JP6.
So it said it failed but on the samsung kies software it now says the csc JP6 and i cant update any firther.
Im sorry i should maybe of checked the code better too be honest i didnt check the full version upgrade, i just thought ok firmware upgrade yup ill do that and flicked through the yes options til the upgrade started.
Thanks for any replies.I have a untouched samsung galaxy S by the way,i not done anything too it except installed apps and games.So no roms,no lag fix,no hacks at all.
Its been a coupleof days now since my post so hope its ok too comment in it again so maybe i can get some help.
Im not sure if my first post explained itself enough so if anyone has any questions i will be happy too answer them.I dont know if my phone will be affected long term but the fail or not.
Csc..what is this why had the software felt it needed too be changed from 5 to 6 ?
the fact it said it failed yet on checking i cannot update again and it has in fact changed from 5 to 6 as it said it would.All my added shortcuts on home screens went but the files stayed.
csc....has anyone also got the changed firmware like i have and gone through the failure too get it.
Im trying too add my own questions in the hope someone has some answers since i see many questions get answered in this section within no time,but mine seems too of stumped some.
thanks for replies guys it will settle my mind and i will of course try too find my own answers and if all else fails i will contact samsung and ask them what went wrong.
Hi,
I installed Kies today and connected my girlfriends cellphone, a Samsung Champ Duos (don't know if it's a phone only for the Philippino market)... Same here, started up first time and Kies prompted me to update the phone's firmware. I followed the steps, something went wrong and I was told to perform an emergency recovery.
I tried, but after 63% an error message appear telling me that something went wrong and "if the problem persists please contact support centre".
I've tried the recovery process maybe 20 times now and same every time. I have already sent an email to the support, but hoping someone here knows how to fix this in the meantime.
Thanks in advance!
Not sure Kies can be unreliable...
Have you tried another computer?
Try the recovery again but hold the usb cable in place, it may have a loose connection
Either way support should answer you shortly and they will sort it out, as it should be under warranty and kies messed it up. They will probably tell you to find your nearest service centre...
@Caz2k11 if you ever read this again and still haven't got your answer, it shouldn't have affected you that there was a problem installing in the first place.
CSC - there is a sticky on the the general section that describes most of this stuff but in brief i think its either country specific code or country service code, something like that. Really its only important if you have problems downloading things from the market, or reception/data related issues. Usually carrier related... Its worth checking you have the correct one when you update as it saves you from changing it later which results in a factory reset.
Ahh damn it...
Got a reply from their support this morning. They apologized and told me I have to send the phone to my nearest service centre. Great for me living in the province and I'll bet the closest service centre is located in Manila....
Does anyone know if the *original rom* is available somewhere on the internet?
Most of us do not use kies to update
You can fiind the latest original ROMs at samfirmware.com
jc
3d_jc said:
Most of us do not use kies to update
You can fiind the latest ROM ar samfirmware.com
jc
Click to expand...
Click to collapse
Hehe no ****
I'm running Andriod on my HTC Leo as well, but this is my girlsfriends phone, still warranty so I'll be a bit careful at the moment.
Have registered on the site mentioned above, not sure which file I'm going to use or anything, since I cannot start the phone to see the current firmware etc. The model no. is GT-E2652W and "SSN" is "E2652WGSMH", does that mean it's a E-series phone?
It means a few things ...
First of all, you are totaly at the wrong place since this forum section is for Samsung Galaxy S, and you Champ Duo , well, isn't a Galaxy S !
Second thing is that this forum, as well as samfirmware, deal mostly with Android phones, which your isn't, I believe. It does somehow look like, but isn't.
Sorry I can't help more
jc
3d_jc said:
It means a few things ...
First of all, you are totaly at the wrong place since this forum section is for Samsung Galaxy S, and you Champ Duo , well, isn't a Galaxy S !
Second thing is that this forum, as well as samfirmware, deal mostly with Android phones, which your isn't, I believe. It does somehow look like, but isn't.
Sorry I can't help more
jc
Click to expand...
Click to collapse
Yes, I'm awared of that. Found this thread when I Google-searched "samsung emergency recovery".
Sure, no arm done, it's just that non android phone have a different way to recover. I did a couple of googling too, but must admit I did not find a great deal of information either,
Sorry and best of luck for bringing your device back to happiness.
jc
So here's the deal.
it's a long story, but i happened in a short time.
I was unlocking my bootloader and stuff on my nexus one on my mac. using the boot loader.
I used the superboot to unlock it.
and so i succeed in that.
i didn't bother with the install-superboot-mac.sh thing.
i didn't know that by then.
so i went on to search about the cyanogenmod 7, and i can't get the radio refreshed. i read the article in the cm forum.
so, i saw this post somewhere,(...read hundreds of posts now)
that tells me to use the rom manager thing.
so i downloaded it, and i tells me that my phone is not rooted!
so i was wondering how this happened.
i searched online, and i found this post telling me to use that install.bat(which is for windows, mac is the one i mentioned above) thing after i unlock the bootloader.
i was a bit scared.
but i went on to the fast boot manu and i connect my computer,
i put the directory in, and then i threw the install-superboot-mac.sh thing in my phone, successful, so i rebooted my phone.
And after the first not-ANIMATED start up screen, which is the staying-X and the unlocked symbol at the bottom, the screen goes black.
i was not sure what happened. so i pullout the battery and booted it again.
same thing.
it was not until the third time i opened it and waited for it, i realized that it was my screen that's not working!
After the stable X, the system goes to the animated one, but my screen is blacked out, so i can't see.
The bottoms on the phone are still working , yet i can't see a thing!
I can still open the fastboot/bootloader screen, but after that, nothing!
the recovery don't work, it's just an android with the sign.
I'm very worried about this situation.
please reply to me!!
i really need help, since i know nothing about this.
I just thought that 2.3's cool and now i got this....
here's some info that might help,
i have the korean version of the phone, it was cheaper and stuff.
didn't notice a different except that there's no 3g?
i don't really know what's the deal with it.
but it seems to be special or something.
The phone is unlocked, but my computer fails to find it using the adb devices.
im not sure if my phone is usb debbuging.
probably yes.
Everytime i try to load the recovery, it tells me to wait for device.
I really need help!!
OK... so you might have messed up your firmware... no worries... get a custom recovery (like AmonRA recovery)... flash it using fastboot... pop in a custom ROM like CM... flash and reboot...
the thing is i can't load the recovery or the mods. so here's the problem
Do as Craig said.
Put phone into the bootloader screen. White screen with skateboarding androids.
Do your thing with fastboot.
Reboot directly into the freshly flashed recovery and install a ROM.
Read the wiki.
Sent from my Nexus One using XDA App
Read my signature, find a proper guide in Wiki ("Unroot / restore"), execute.
Next time, before you're trying anything, either find a good guide on the internet or try understanding what things actually do before you attempt them.
I've read the wiki, but is my phone compatible with the rom?
my phone's korean version..
im not sure if i can.
and i certainly can't afford another adversity.
reclusivenigma said:
I've read the wiki, but is my phone compatible with the rom?
my phone's korean version..
im not sure if i can.
and i certainly can't afford another adversity.
Click to expand...
Click to collapse
It will work just fine, your phone isn't bricked and will be working fine in no time if you follow the advice in the posts above.
Edit: Am I the only one who wants the word 'Bricked' explicitly defined for the xda forums?
and also, since my screen is out, im not sure of weather my back up data thing is on or not, and usb debugging also
i've tried the ROMs, but the three i tried don't work.
downloading more, but i doubt if there's difference.
the device doesn't tell me to install the update, instead it just goes back to the bootloader screen
i've tried the ROMs, but the three i tried don't work.
downloading more, but i doubt if there's difference.
the device doesn't tell me to install the update, instead it just goes back to the bootloader
...
K, they don't really work, after checking the rom, my phone just goes back to the screen that showed up when i pressed power and volumn down
Why do people insist on receiving their instructions on a golden spoon?
Do you think you're the first one ever that got his phone corrupted? Maybe the second?
Go to Wiki, download FRG33, proceed with instructions for PASSIMG method. PUT ATTENTION THAT YOU'RE NAMING THE FILE RIGHT!
These instructions have been given in 800000000 threads by now. Look for the thread about moving from Vodafone OS version to stock Google OS. Search the forum with the words "restore stock".
What exactly are you doing?
You have a few pieces of advice that will work, but you're not really giving any details about what you are actually trying...?
Here's the link to follow Jack's advice:
http://forum.xda-developers.com/wiki/index.php?title=Nexus_One/Guides_%26_Tutorials#Unroot_.2F_Restore_your_Nexus
Sent from my NookColor using Tapatalk
just if you want to know,
i've downloaded the frg33
and i HAVE NAMED it CORRECTLY!
YET, IT doesn'T WORK
im not a retard!
after the 2 min period of searching, which is step 7, my phone goes back to the same screen
CID incorrect!
Update Fail!
Do you want to reboot device?
<VOL UP> Yes
<VOL DOWN> No
this shows up a couple of times also
Why ask for help if you're not going to do what people tell you?
With a unlocked bootloadet flash a custom recovery.
Reboot DIRECTLY into that.
Wipe and flash any rom you want.
If you don't know how to do any of the above search or read the wiki.
Sent from my Nexus One using XDA App
As albundy2010 suggested - if you have the bootloader unlocked (I didn't notice that part in the OP), just follow the guide for unlocked bootloader - fastboot flash all the partitions on the device manually. The guide is in the same place, but a different one - this time use "for unlocked bootloader".
tHANKS man!
I was such a f-in idiot...
now i can finally boot into the recovery..
I got it.. thanks guys
It's a tough flashing world out there, hey rec
I am glad you got it working