when i bought my T2 it came with radio: 4.48.25.20
i have flashed other ROMs and have lost this radio
i have since downloaded the radio and it is a topaz radio
and i know topaz radios should flash just fine, but i keep getting an error wrong device
i really want radio 4.48.25.20 on my T2, it works great here
GustavTheLion said:
when i bought my T2 it came with radio: 4.48.25.20
i have flashed other ROMs and have lost this radio
i have since downloaded the radio and it is a topaz radio
and i know topaz radios should flash just fine, but i keep getting an error wrong device
i really want radio 4.48.25.20 on my T2, it works great here
Click to expand...
Click to collapse
You need security unlock to flash topaz radios, and IIRC some hex editing too .
Dave
really? because i am hard spl'd, and on the raphael thats all you needed to flash any radio
Supposedly you can flash any radio that was made for a Rhodium with HardSPL. For other model radios (like Topaz), you have to security unlock it which is slightly different.
So your choices it looks like for now is to try one of the newer radios (I think there is a higher number T-Mobile one for Rhodium on the thread); security unlock your phone and flash the Topaz radio; or hang tight and pray someone posts the ATT Stock Radio!
GustavTheLion said:
really? because i am hard spl'd, and on the raphael thats all you needed to flash any radio
Click to expand...
Click to collapse
Yes, the Device will only accept a Topaz Radio if it is Security Unlocked. This is also true in the Raphael.
Thanks
Dave
Related
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!
I´ve a HTC 3600 and installed Hard-SPL Olipro 1.20 then executed the application for releasing the Sim and CID restrictions of my HTC.
I keept the WM5 ROM and tested the device. The Sim is now unlocked, i suppose so is CID, how can I check this before installing a new cooked ROM?
My gps was working fine, now I can´t get gps signal, do I need a radio update? Which is recommended? Did the sim unlocking process downgraded my radio rom
ROM: 1.23.410.2
RADIO: 1.16.00.00
thanks in advance
you are right
Unlocking P3600 downgrades the radio...
Therefore you cannot use GPS until you upgrade the radio again.
Take a look here, http://trinityguides.info/index.php , choose a gps enabled radio and upgrade...
Thanks, I also thought that.
Which of the Radio Rom´s should I choose?
Radio 1.38.00.11
Radio 1.41.00.11
Radio 1.46.00.11/30.11
Radio 1.50.08.11
How I can I check if my CID was succesfully unlocked? I want to install a new ROM with a different language.
If you installed hard spl on your device, it doesn't matter if you have cid unlocked or not, cause hardspl let's you install any rom in any language.
As for the radio, it depend's on your carrier and the country you are in.
I see you are in Portugal so you can use the latest version (Radio 1.50.08.11), it works just fine for me.
Humm, I´ve read that the latest ROM cause mora battery drain than the others, is this true?
What improvements are present in the latest ROM´s compared to 1.38 ?
Guys,
I have currently Duttys HD 2.8 installed which is pretty perfect but my HD has problems with reception (drops call during calling, etc.). So I assume Hardware failure and need to go back to German Stock Rom.
The issue is now that there is no new German Romupdate yet and SPL is 1.14 (or 1.15).
How can I go back to this stock Rom. When I install it with SPL 1.56 it will not work I assume.
Any ideas?
cheers
chefffe
the german shipped rom should match your phone.
You shouldn't need anything except the shipped setup.
Have you tried it yet?
If you have Duttys V2.8, use USPL to flash to original stock rom
EDIT
More info can be found here
but will the installed SPL 1.56 work with an old german Rom (after Rom flash with using USPL 2.5)?
As far I understood old Rom need also old SPL Version?
you must have flashed back to spl 1.14 in order to install duttys rom. uspl is only temporarily for one flash procedure. you keep spl 1.14
so the only thing to do is to flash your stock rom. that´s all
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
chefffe said:
but will the installed SPL 1.56 work with an old german Rom (after Rom flash with using USPL 2.5)?
As far I understood old Rom need also old SPL Version?
Click to expand...
Click to collapse
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
chefffe said:
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
Click to expand...
Click to collapse
Are you sure the reception problems derive from the ROM? Maybe you have to try a different radio!
chefffe said:
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
Click to expand...
Click to collapse
When you flashed to Dutty's 2.8 you had to have an SPL v 1.14 and then install an original HTC 1.56 rom. During this process it upgraded your SPL to v 1.54. If you now want to downgrade to an older HTC German rom that is not based on SPL v 1.54 all you need to do is download said rom and install it after running USPL.
You can check this by placing your phone in the bootloader right now (turn it off. hold volume down button while pressing power on button). It should say SPL 1.54.0000. If it does then all you need to do is run USPL and then whatever rom you want to load. When you load the older stock German rom it will replace your current SPL with the one from that rom. I have yet to see an original / stock HTC rom that does not include the SPL in it. And if you check the Blackstone Wiki these are the instructions...
MAMeingast said:
Are you sure the reception problems derive from the ROM? Maybe you have to try a different radio!
Click to expand...
Click to collapse
Like MAMeingast said, have you tried flashing another radio? You should try running USPL and flashing the radio you were using before Dutty's 2.8 first in my opinion... and see how this works!
I tried 3 different Radios.
The very strange thing now is, that I flashed the new wwe update rom (with spl 1.56). Then it worked pretty normal. So I flashed back Duttys (because much better) and have the same problems again. I flashed now again back to wwe and for the last 4-5 hours I have normal reception ???
Thats really weird because I thought Dutty is using the same 1.13.25.24. or even more strange if the radio is not changed with his rom.
chefffe said:
I tried 3 different Radios.
The very strange thing now is, that I flashed the new wwe update rom (with spl 1.56). Then it worked pretty normal. So I flashed back Duttys (because much better) and have the same problems again. I flashed now again back to wwe and for the last 4-5 hours I have normal reception ???
Thats really weird because I thought Dutty is using the same 1.13.25.24. or even more strange if the radio is not changed with his rom.
Click to expand...
Click to collapse
Dutty's rom does not include the radio but it may be changing the rilphone.dll! I'm not sure. But it's still weird because if you flash the WWE 1.56 rom and then Dutty's all should be well and good.
I need to revert my last info. Also with the 1.56 wwe Stock Rom my Phone is not working properly. I tested now 6hours and it was several times not reachable although I had full reception. I think my HD is really broken .. **** ...
Therefore I need to install the old german stock Rom with SPL 1.14.
I still dont have a clue how to do that
chefffe said:
I need to revert my last info. Also with the 1.56 wwe Stock Rom my Phone is not working properly. I tested now 6hours and it was several times not reachable although I had full reception. I think my HD is really broken .. **** ...
Therefore I need to install the old german stock Rom with SPL 1.14.
I still dont have a clue how to do that
Click to expand...
Click to collapse
It's actually quite easy! Do you still have the stock German HTC ROM with SPL 1.14? If not, download it again. Put your phone in bootloader, run USPL, and load the stock German HTC rom. That's it! You can verify your SPL reverting back from 1.54 to 1.14 by going into the bootloader afterwards.
exactly thats it. I didnt thought that spl 1.14 is also included in this rom so I was a bit afraid. But I tried and it worked without problem. Thanks man ;-)
New HTC ROM update incl. german 14/4/09
Hi cheffe,
not 100% sure if this is what you're after?
http://www.htc.com/de/SupportViewNews.aspx?dl_id=537&news_id=142
I'll stick with English
chefffe said:
exactly thats it. I didnt thought that spl 1.14 is also included in this rom so I was a bit afraid. But I tried and it worked without problem. Thanks man ;-)
Click to expand...
Click to collapse
Very good, glad you hear you're back in business!
HTC lova said:
Hi cheffe,
not 100% sure if this is what you're after?
http://www.htc.com/de/SupportViewNews.aspx?dl_id=537&news_id=142
I'll stick with English
Click to expand...
Click to collapse
Hey ... were here in the HTC Touch HD Thread .. not Touch 3G ;-)
chefffe said:
Hey ... were here in the HTC Touch HD Thread .. not Touch 3G ;-)
Click to expand...
Click to collapse
I must have miscopypasted.. *cough*
Tschuldigung
chefffe said:
Guys,
I have currently Duttys HD 2.8 installed which is pretty perfect but my HD has problems with reception (drops call during calling, etc.). So I assume Hardware failure and need to go back to German Stock Rom.
cheers
chefffe
Click to expand...
Click to collapse
So your phone worked fine with the stock rom?
i´m with german e-plus provider and have to assume poor recepion qualities with my touch hd, either stock or custom rom / radio roms ...
only thing that helped was disabling 3g - back to 56k internet
So: did you reflash work? Phone usable again?
Here you go...
A working reconstructed stock AT&T Tilt 2 ROM.
No Radio
No Bootsplash
enjoy,
-e
Rapidshare Link: here
Thanks. Not too concerned about the Radio if it isnt hard to Flash. Is it true you have to do a SIM Unlock to flash a Radio? I looked at the top of the Radio Thread and it doesnt mention it.
What Radio will any of you ATT users who Flash this, use?
Downloading....
eras2r said:
Here you go...
A working reconstructed stock AT&T Tilt 2 ROM.
No Radio
No Bootsplash
enjoy,
-e
Rapidshare Link: here
Click to expand...
Click to collapse
thank you sir
Screen Shots
Please post screens for rom..thanks
Anyone try this? If so, and you have ATT, what Radio will you be using? Also, can someone confirm if a SIM Unlock is required to flash a Radio
Well done
Bravo! Can anyone cab up the ATT Dialer with Video Share from this ROM
Jola66 said:
Anyone try this? If so, and you have ATT, what Radio will you be using? Also, can someone confirm if a SIM Unlock is required to flash a Radio
Click to expand...
Click to collapse
Sim Unlock required to flash a Topaz radio. Check radio thread. I am using 4.49.25.17. No SIM unlock required for that one. Just HardSPL.
mcfarlan said:
Sim Unlock required to flash a Topaz radio. Check radio thread. I am using 4.49.25.17. No SIM unlock required for that one. Just HardSPL.
Click to expand...
Click to collapse
Thanks. You have no problems with using that Radio I take it? My stock was 4.48.25.20.
Jola66 said:
Thanks. You have no problems with using that Radio I take it? My stock was 4.48.25.20.
Click to expand...
Click to collapse
4.48.25.20 is not yet available...
Thanks Eras2r. It works.
Thanks Eras2r! It worked for me too.
Now if I could only get the Topaz 4.48.25.20 radio loaded up - in theory the rilphone.dll is already on the AT&T ROM so it should work.
I have HardSPL and unlocked sim. Yet, the Topaz radio will not load for me. Any ideas how to get it to load?
aaronsmckee said:
Bravo! Can anyone cab up the ATT Dialer with Video Share from this ROM
Click to expand...
Click to collapse
Let me know if this works. I think I have video share in this, but I might be wrong!
moderateinny said:
Thanks Eras2r! It worked for me too.
Now if I could only get the Topaz 4.48.25.20 radio loaded up - in theory the rilphone.dll is already on the AT&T ROM so it should work.
I have HardSPL and unlocked sim. Yet, the Topaz radio will not load for me. Any ideas how to get it to load?
Click to expand...
Click to collapse
Not SIM unlocked, it has to be SECURITY unlocked if you want to flash a non-Rhodium radio. If you want a Rhodium radio, only HardSPL is needed.
Check this thread for more info on how to security unlock - http://forum.xda-developers.com/showthread.php?t=555339
pinoymutt said:
Not SIM unlocked, it has to be SECURITY unlocked if you want to flash a non-Rhodium radio. If you want a Rhodium radio, only HardSPL is needed.
Check this thread for more info on how to security unlock - http://forum.xda-developers.com/showthread.php?t=555339
Click to expand...
Click to collapse
I am SECURITY unlocked - I've done the HardSPL thing and can load ROMs, Radios, etc. without a problem. I am also sim unlocked, but I guess that isn't required.
I still cannot load the Topaz radio on to my Tilt 2 though.
Any word on if/when the splashscreen upon bootup will be included or if you can go back to the stock SPL?
this build is very stable (i installed it on my tilt 2). Wierd thing tho is that the HTC Youtube app is missing.
moderateinny said:
I am SECURITY unlocked - I've done the HardSPL thing and can load ROMs, Radios, etc. without a problem. I am also sim unlocked, but I guess that isn't required.
I still cannot load the Topaz radio on to my Tilt 2 though.
Click to expand...
Click to collapse
....so you purchased the complete unlocker package from olipro WITH the security unlock included?? If not, you may not be security unlocked. When in bootloader mode, does it say "security unlocked" on top of the screen?
Later..........
doctajay said:
this build is very stable (i installed it on my tilt 2). Wierd thing tho is that the HTC Youtube app is missing.
Click to expand...
Click to collapse
Should be in the windows directory
moderateinny said:
I am SECURITY unlocked - I've done the HardSPL thing and can load ROMs, Radios, etc. without a problem. I am also sim unlocked, but I guess that isn't required.
I still cannot load the Topaz radio on to my Tilt 2 though.
Click to expand...
Click to collapse
Security unlock, SIM unlock, and HardSPL are 3 different things. Unless you purchased the complete package from Olipro as mentioned in the thread (or were given a code directly), you won't be able to flash a radio from a different model of phone.
SIM unlock = use of SIMs other than the carrier locked ones
HardSPL = use of other ROMs, as well as other Rhodium-SPECIFIC radios
Security unlock = use of radios from other phone models (such as Topaz)
Thanks so much OP
still cannot get the whole package with rom radio huh? I guess I will wait longer. Too itchy to try different rom. ahhhh
Okay, so I think the official WWE ROMs include a Radio update within them, because all the sudden I have the latest HTC Radio. I was not planning on flashing my radio for warranty purposes, but now am stuck. Has anyone been able to extract the official TMOUS Radio (I believe it's 3.45.25.14) as a "just in case"?
There is a dedicated Radio thread for the Rhodium. Try THERE.