Anybody can help! my touch sceen not work?
On Align screen setup after touch all the cross, again and again (so many time)...never finish :. thank!
Reset
This may seem obvious, but have you tried a soft-reset?
grahamkdt said:
This may seem obvious, but have you tried a soft-reset?
Click to expand...
Click to collapse
yes, but still not work.
This might be obvious too but have you tried using the stylus and doing it super carefully?
Hi
I have the same problem.
Display doesn't work properly. When I am trying to calibrate it, have the same problem as ni91t. I tried to do it "super carefully" , I also tried to flash new ROM (I tried 3 different) but still the same.
Diamond is uncotrolled by touching display, it is possible only by using HW buttons.
I am afraid that this is HW problem.
Related
i have a tilt/kaiser. my third one. after about two months of using this one the backlight stopped coming on at all. everything works on the phone besides the backlight on the screen. i was thinking about buying a new lcd but i wanted to see if there were any other suggestions first. and i have flashed about 3 different roms to it but that is not the issue.
also it gets real hot in a matter of seconds after i turn it on...
bmw06 said:
i have a tilt/kaiser. my third one. after about two months of using this one the backlight stopped coming on at all. everything works on the phone besides the backlight on the screen. i was thinking about buying a new lcd but i wanted to see if there were any other suggestions first. and i have flashed about 3 different roms to it but that is not the issue.
Click to expand...
Click to collapse
Do you still have the "Backlight" icon in start/settings/>System tab?
i cant tell. all i can see when i turn the phone on is the att logo, and i can barely make that out with the glare. then all the sounds and lights work on the keyboard and the phones face but the backlight will not illuminate. do you think a hard reset would fix the problem. i mean could it have been something i installed?
yes the backlight can still be manipulated through system settings but it has no effect on the back light
bmw06 said:
i cant tell. all i can see when i turn the phone on is the att logo, and i can barely make that out with the glare. then all the sounds and lights work on the keyboard and the phones face but the backlight will not illuminate. do you think a hard reset would fix the problem. i mean could it have been something i installed?
Click to expand...
Click to collapse
You may have to hard reset.
ive already tried a hard reset
What about the warranty?
bmw06 said:
ive already tried a hard reset
Click to expand...
Click to collapse
If you've completed a hard reset, it's time to look at getting it repaired under warranty for free. Of course if non-approved spl/ROM/Radio are installed you should revert them first but this would be tricky if you can't really make out whats on the screen - then if you can see it enough to do a hard reset....
my HTC Touch Diamond randomly the screen got darker and darker now it black and i cant see a thing it still works cuz i use it thru mymobiler how do i fix my screen D:
anyone? :/
Did you try to change it through power management?
hkayak said:
Did you try to change it through power management?
Click to expand...
Click to collapse
nope it randomly did it its self
First thing to try is Hard reset. Failing that flash another ROM. If it still happens then its a hardware fault.
had the same problem, but my screen was not absolutely dark, so i could go to settings and changed the setting for backlight two times and then it worked again.
If a hard reset doesn't work then it's probably an lcd failure. You can replace the lcd if you want. If you have the insurance from your carrier then you might just go that route.
Need HELP ASAP! It is very hard for me to type and use the touch screen.
When I type and key in the letter ever so lightly, I end up with the wrong letter or the letter is entered 3 times. It is like it rapidly presses the letter.
Have you tried wiping / reflashing (if rooted) or factory reset (if not)?
That's always the first thing to try.
Thank you! Will let you know once it's fixed.
I tried different roms, it improved a little, nut now it hangs a lot.
You lucky yours is even sensitive. Mine barely recognizes my touch inputs .
BigWorldJust said:
You lucky yours is even sensitive. Mine barely recognizes my touch inputs .
Click to expand...
Click to collapse
I have to just let HTC replace my screen.
Yeah, I think the common problem is a not sensitive touch screen. Is there a way to tweak the screen to be more sensitive?
Hello,
My Touch screen doesn't respond to touching since an hour ago.
I see no logical reason for this fault,
My screen is guarded and nothing happend to it.
I tried to remove battery and insert it with no luck, I booted my phone into CWM touch recovery, and it also doesn't recognize touching.
update2:
The problem appeared again.
just flash a kdz to return to stock rom
naeem86 said:
just flash a kdz to return to stock rom
Click to expand...
Click to collapse
The problem appeared again I tried a lot of times to remove battery&insert but it doesn't help.
Please help me.
I've just flashed my phone to stock rom,
I'm still having the same touchscreen issues - the screen won't respond to touching.
Any suggestion please?
Is it possible that the touchscreen issue is caused because of the screen protector?
ohadz said:
I've just flashed my phone to stock rom,
I'm still having the same touchscreen issues - the screen won't respond to touching.
Any suggestion please?
Is it possible that the touchscreen issue is caused because of the screen protector?
Click to expand...
Click to collapse
Screen protector protects screen If you have got stock FW back on the phone, just bring it to your carrier and they should do it on warranty.
N00BY0815 said:
Screen protector protects screen If you have got stock FW back on the phone, just bring it to your carrier and they should do it on warranty.
Click to expand...
Click to collapse
Thanks for the advice,
I flashed stock rom and now when I turn on my phone It shows me the "Android Welcome Screen", Is there a method how to bypass this screen without touching the screen? (If I'm taking phone to my carrier, it might seem strange to them that my phone shows the "Welcome screen" whether the touchscreen doesn't work so they could know I flash my phone and not to accept my phone's warranty)
ohadz said:
Thanks for the advice,
I flashed stock rom and now when I turn on my phone It shows me the "Android Welcome Screen", Is there a method how to bypass this screen without touching the screen? (If I'm taking phone to my carrier, it might seem strange to them that my phone shows the "Welcome screen" whether the touchscreen doesn't work so they could know I flash my phone and not to accept my phone's warranty)
Click to expand...
Click to collapse
You can try on-screen phone, which is a software by LG, but i think, that this also needs to be setup first... Otherwise, just tell them, that you did a factory reset, because your phone wasnt working properly anymore, and thats when your error occured.
I dont see another way... Maybe repair it on your own
N00BY0815 said:
You can try on-screen phone, which is a software by LG, but i think, that this also needs to be setup first... Otherwise, just tell them, that you did a factory reset, because your phone wasnt working properly anymore, and thats when your error occured.
I dont see another way... Maybe repair it on your own
Click to expand...
Click to collapse
I'm going to take my phone back to carrier
But there's very strange thing: the touchscreen rarely works.
I removed the battery for a night and when I got up in the morning and I inserted the battery and turned the device on, for a few seconds the touch worked . What does it tell about phone?
I've just received my phone from repairing, and my touch screen has been replaced.
I'm a little disappointed because I expected for getting new phone(I have a warranty). I've also noticed that the screen is a little thicker, about few mm, which is weird.
Is it right that phone with replacement touch screen won't be as smooth and good as normal one, or not necessarily?
Same problem of Freezing screen
Disappointing but i too have this very same problem with my brother's P970... any ideas how or why?
though sometimes it would respond but leaving it a few minutes would again make it freeze. The hardware buttons work but the 4 touch buttons wont. now i cannot get thru the rom manager to make it into Bootloader mode so i can install another rom...
some things i did a few days before this happened:
1. flashed CWM recovery successfully.
2. installed a lot of apps and happened to fill up the SD card.
3. installed a new ROM Gingerbread Repackaged V20N
I can still get to S/W Upgrade but all I need is the Bootloader Mode. I honestly dont think this would be a digitizer malfunction since it works well in a given time. It's like it lagggggs much and unresponsive. I cannot get past the lock screen. Any ideas or any other way to get to the B/L mode? Thanks.
arzakem said:
Disappointing but i too have this very same problem with my brother's P970... any ideas how or why?
though sometimes it would respond but leaving it a few minutes would again make it freeze. The hardware buttons work but the 4 touch buttons wont. now i cannot get thru the rom manager to make it into Bootloader mode so i can install another rom...
ARZAKEM i have the very same problem too i was also doing the same stuff which you atempted and end up with none responsive touchscreen.
my phone is since then lives in a my draft in the kitchen and i was also curious about the malfunctionality because it worked sometimes and other times not.
I just thumbled upon the post when i search the web i know its too late to ask but could you please please tell me what you done with that phone ???
I ordered a new touchscreen from ebay and it will arrive soon but i was wondering wether you managed to fix it or not? could you please tell me what was the real problem did you replace the touchscreen or is it not the touchscreen?
Click to expand...
Click to collapse
I have this problem occasionally as well, but only occasionally and only with cm10
Sent from my LG-P970 using xda app-developers app
my phone has somehow the same issue, the touch screen works normally,but out of nowhere it stops responding,i mean the hole screen and also the 4 touch buttons on the bottom just wont work like they supposed to,but here is the catch,i lock the phone with power button and the screen and the buttons start to work normally for a while......but then the problem happens again!!! could someone tell me what the heck is wrong?? is it the software or the physical touch sensor thing is broken?? HELP!!
albertwesquer said:
my phone has somehow the same issue, the touch screen works normally,but out of nowhere it stops responding,i mean the hole screen and also the 4 touch buttons on the bottom just wont work like they supposed to,but here is the catch,i lock the phone with power button and the screen and the buttons start to work normally for a while......but then the problem happens again!!! could someone tell me what the heck is wrong?? is it the software or the physical touch sensor thing is broken?? HELP!!
Click to expand...
Click to collapse
You need to indicate your current ROM. Then can the issue be accessed
Sent from my LG-P970 using Tapatalk 2
After I restart the phone, touch screen does not work anymore.
Now I have to use the mouse to control the mobile.
Is there a secret code or something I can do to reset the touch screen? Or some sensors or anything?
Methods such as restarting again and safe mode did not work. I also tried a total shutdown, then turn it on again, but nothing.
It does not want to work.
Any advice will be helpful.
Hi Hogar315,
Maybe with CIT you know more, which sensors, touchscreen and so on on your phone work/or not...
settings -->my device-->all specification push 4 times (Ore more ) kernel version.
Also you can try to enable the advanced powermenue in the developer settings. If you shot down you can try to go directly in safe mode.
Good luck
Arkon1
arkon1 said:
Hi Hogar315,
Maybe with CIT you know more, which sensors, touchscreen and so on on your phone work/or not...
settings -->my device-->all specification push 4 times (Ore more ) kernel version.
Also you can try to enable the advanced powermenue in the developer settings. If you shot down you can try to go directly in safe mode.
Good luck
Arkon1
Click to expand...
Click to collapse
Touchscreen on CIT testing does not work
Safe mode does not solve the problem either
What advanced power menu will give me?
Thanks
hogar315 said:
Touchscreen on CIT testing does not work
Safe mode does not solve the problem either
What advanced power menu will give me?
Thanks
Click to expand...
Click to collapse
When you dropped the phone , the force of impact could've caused some internal connector to become loose.
Or it could've damaged the touch digitizer itself.
Bobfish said:
When you dropped the phone , the force of impact could've caused some internal connector to become loose.
Or it could've damaged the touch digitizer itself.
Click to expand...
Click to collapse
I do not remember it dropped me... do you think that this could be problem after maybe half a year or even more?
But I was doing restarts pretty often without any problem.
Thanks