I just recently got a HTC Dream with the following details:
DREAM PVT 32B SHIP S-ON d
HBOOT-1.33.0010 (DREA20000)
CPLD-4
RADIO-3.22.20.17
Jun 2 2009,21:33:16
Firmware: 1.5
Baseband: 62.525.20.18U_3.22.20.17
Kernel: 2.6.27-9af60ed4 [email protected]
Build: 1.87.421.1 146733 CL#47295 release-keys
I noticed that the Dream is not able to use WPA Enterprise and in order to gain access to wpa_supplicant.conf I need to root the phone. I have tried several approaches and have not succeeded:
- Tried 1-click and am unable to get into recovery mode (device hangs on "HTC Dream" logo after Home+Power)
- Tried http://forum.xda-developers.com/showthread.php?t=442480. The downgrade fails with "Invalid model ID". (Tried both RC29 and RC7)
Can someone confirm that the phone with the above FW-version is rootable and please point me in the right direction. I have gone through the forum last night as well as Google, but as a complete noob there is so much information, and I want to make sure, I do the right thing.
I also noticed that when booting into recovery mode, I get the triangle-logo, but no recovery options (I assume that this might have gotten messed up in my attempts to root the phone) - any advise on this?
try cyans rom i think he fixed this with somehing he took out of dohnut
JJbdoggg said:
try cyans rom i think he fixed this with somehing he took out of dohnut
Click to expand...
Click to collapse
I tried cyan's recovery image from here: http://forum.xda-developers.com/showthread.php?p=3915123 (i.e. via 1-click). For anything else I would need to have the phone rooted, which I am not able to do.
Okay, I bricked my first Rogers HTC dream because I thought it froze during a reboot after I updated the ROM so I pulled out the battery... sure enough I didn't wait long enough and that phone is no more. I am in the US on AT&T and wanted to take advantage of 3G.
Basically I would like to know the correct procedure before going any further.
I'm following this:
[HOWTO] Root, Hack, Flash G1/Dream - http://forum.xda-developers.com/showthread.php?t=553416
To use this:
[ROM]TheOfficial DONUT TMO US/EU & AOSP-1.6_r1.4(dream/sapphire32B)[11/17/09]-v2.2.1 - http://forum.xda-developers.com/showthread.php?t=538456
So far all I did was download ASTRO, Backup Recovery Image, and then Flashed to RAv1.2.1G.img. After I rebooted while holding Home+Power it stopped at the "ROGERS" screen and my heart stopped. I thought I bricked my phone again. After pulling out the battery and rebooting without trying to get into recovery it booted up fine. So before I go any further what should I or shouldn't be doing. As of right now my phone works fine and will boot up fine and boot into the HBOOT screen but it will NOT boot into recovery, it will just say rogers.
Here is what the HBOOT screen says:
DREAM PVT 32B SHIP S-ON d
HBOOT-1.33.0010 (DREA21000)
CPLD-4
RADIO-3.22.20.17
Jun 2 2009,21:33:16
If anyone can help out here. What exactly should I be doing with a Rogers Dream with the above settings?
Thanks a lot.
use this thread instead?
http://forum.xda-developers.com/showthread.php?t=558301&page=8
hi.
i think its the spl that prevent you from booting, try updating your radio version to the compatible one and update to hspl.Make sure your radio version is the right one
HBOOT-1.33.0010 is the so called "perfected" spl
Now this is for the normal T-Mobile G1 but when you flash a radio you should ALWAYS flash the spl first. So I'm assuming that you have to do the same with a rogers though. I'm jealous I wish I had a rogers G1 so I can use 3G =[
CrazyEye said:
Now this is for the normal T-Mobile G1 but when you flash a radio you should ALWAYS flash the spl first. So I'm assuming that you have to do the same with a rogers though. I'm jealous I wish I had a rogers G1 so I can use 3G =[
Click to expand...
Click to collapse
NO the radio should always be flashed first. the .2005 spl will brick a g1 with the wrong radio.
however, the .2005 spl is safe with ALL roger dreams.
IIRC, rogers needs the .2005 to begin the rooting procedure.
you need to get that or use a proper 1-click that will work on your phone
I just got my replacement G1 (I bricked my last one, stupid move on my part) and it is a referb.
Hboot says:
PVT 32B
1.33.0010 DREAM21000
CPLD-4
Radio 3.22.26.17
So I thought this should be easy to root, but Zinx's Recovery Flasher won't work.
Backup gives - Backup FAILED: Could not run command. I don't really care I don't need a backup.
Clicking Flash gives - Flash FAILED: Could not run command.
Any suggestions?
I thought that since it was still 1.33.0010 all would be good, but no dice.
Also I tried to do the goldcard method but I am not really sure how this works. I created the goldcard... but I don't know how to get the .nbh file onto the card after it has been made into a gold card...
Suggestions please.
If your build number in settings, about phone is 1.89.631.1 you are running Rogers latest firmware update which currently is not rootable.
k so I'm a noob and I'm sure I'm missing something obvious. I was however able to root my rogers dream and I’m now running Cyanogenmod-6.0.0-DS.
I recently purchased the premium version of “ROM manager”. The idea of being able to flash ROMS at will seems cool (although I don’t think there’s that many for my phone.)
The thing is, the ROM manager doesn’t work. The only thing it does is detect a newer version of the OS and download it. I can’t back up my current image or flash a new ROM. If I try, it just hangs at the Rogers screen FOREVER, and I have to take the battery out. Then it will reboot normally. I’ve followed any instructions I have found but nothing I try works.
Please help me! What am I doing wrong?!
You should post the specs of your phone (radio, spl and recovery version) when asking for help.
Got the same problem here. Have you found a solution?
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
RADIO-3.22.26.17
Apr 20 2009, 15:30:43
Thanks
dvscool said:
The thing is, the ROM manager doesn’t work. The only thing it does is detect a newer version of the OS and download it. I can’t back up my current image or flash a new ROM. If I try, it just hangs at the Rogers screen FOREVER, and I have to take the battery out. Then it will reboot normally. I’ve followed any instructions I have found but nothing I try works.
Please help me! What am I doing wrong?!
Click to expand...
Click to collapse
THere is no "Rogers Dream" version of Clockwork recovery..
best is either one of two things:
1) select the "Magic" version when asked while flashing.. this will install the 32a magic recovery that will at least boot on the ebi1 rogers dream
2) install the 2708+ radio/kernel via fastboot and then the dream version.. recall however while that will work for clockwork the cyanogen mod version in RomManager is not 2708+ compatible.. make sure you get one of the other kernels. (also remember if you are with rogers they may cut your data if you have not signed the e911 wavier and use a radio other than the one you have.. yet 3g will be much more relyable on the 2708+ radio if you have signed the wavier.. and more ram)
I have a Rogers Dream/G1 with T-Mobile rc29 rom (doh!), which works and is usable but I want to get back to CM5. Please show me the way or put me out of my misery if its hopeless.
Recovery hangs at Tmobile G1 screen.
Fastboot gives me "00028002 Not Allow" code then is stuck with serial0.
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Tried Adb to get amon-ra 1.7.0, but still won't boot into recovery and is stuck at G1 screen. No memory error, just an immediate echo of the "flash_image recovery data/local/recovery.img" command after I hit enter.
fastboot won't show my device in cmd when at the 4colored screen but adb does recognize.
I'm pretty sure I mixed up the radio and spl, but does having access to the OS give me any options?
Please, point me in the right direction.
****SOLVED**** see Post#20 for my conclusion.
Download clockwork recovery, flash clockwork, then you'll have recovery?
Not sure tho, I think this was how I did it.
I think what you're talking about is ROM Manager, it includes Clockwork Recovery if I understand the dev's description correctly. I haven't tried it myself though.
Seems to me, that he is on a stock ROM and doesn't have root access.
If the phone is booting, a chance could be, to install 1-click-root (don't know how it is called exactly, but you can google for it) and then from there to install a custom recovery. After that, you can install CM5 or something else. Probably first I would install is an engineering SPL (1.33.2003 for example) which supports fastboot. With your current SPL you will not have a chance to get fastboot running.
But be careful: 1.33.2003 supports only radio version 1.x and 2.x. I am not sure if 1.33.2003 is the best solution for you, because you have a rogers dream.
i recomend the old way.. get the fflashrecapk. and use io file manager to flash it.. only problem is you need to be 1.5 if your on 1.6 than you need to downgrade.. but that would be difficult since you have no recovery lol
While a bit more work.. before all the how to's confuse you into bricking your phone, I'd make yourself a gold card, and use it to flash the orange nbh from the 2708+ thread.. (rename to DREAIMG.nbh and place on the goldcard, then boot with camera+power it will ask you to flash it)
Once you have the orange rom you will have fastboot and a 2.x radio.. if you don't need the 3.22 radio .. just flash the 2708+ radio+spl+hboot as per normal followed by a rom.. if you do need the 3.22 radio (rogers customer who has not signed the wavier and wishes to keep data) either flash the rogers e911 update and re-root or 1.33.2005+3.22.26.17 and a rom
Sorry lack of links.
is it rooted?
maybe you can flash the recovery through terminal
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
kl3vr said:
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
Click to expand...
Click to collapse
ok ummm wow you did a lot lol are you sure you did the flaskrec.apk thing right? so as of right now your phone is not rooted? and you are on 1.0? if thats the case you should get automatic updates and hopefully that could help you.. if not try downloading rom manager than flash the clockwork recovery.. personally i hate clockwork but if you can get that to work than i could help you get back to RA if you would like..
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
kl3vr said:
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
Click to expand...
Click to collapse
I think Ezterry's post (#6) is your best option
you don't mention you have tried that
you will need to do some research into goldcards and finding the orange.nbh link
hint for the orange see threads started by ezterry (via his profile) look at the kernel for 2708 thread
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
kl3vr said:
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
Click to expand...
Click to collapse
for the record
1.33.2003 is compatible with 1.x and 2.x radios but will brick with 3.x
1.33.2005 is compatible with 2.x and 3.x radios but will brick with 1.x
so 1.33.200* is only compatible with 2.x
read Ezterry's 2708 post, the answers you seek are in it
sorry for delay lol but with the flashrec file wat you do is press backup than when your typing in the box you have to put exactly what your file says...
ex.. sdcard/recovery-RA-dream-v1.0.7-cyan.img (yours could be diff but make sure you type exactly what your file says that you placed on sd card) hope it helps
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
kl3vr said:
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
Click to expand...
Click to collapse
hey no prob glad to help!! how did you end up fixing it? haha just curious
kl3vr said:
I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio.
Click to expand...
Click to collapse
Why ebi1 is equivalent to the old ebi0 and you loose the extra ram.
Thus unless there is a very specific reason it's a downgrade
kl3vr said:
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Click to expand...
Click to collapse
Best stay as is or upgrade the radio to 2.22.28.25.. As it has been distributed world wide. (Including to all locations 2.22.27.08 was previously distributed)
what did you do?
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
cacaface said:
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
Click to expand...
Click to collapse
If you flashed 0.95.0000 you are no longer using a dev phone (what do you see when you boot holding camera?)
The good news is that the ADP1 used the universal CID (11111111) and is thus not restricted to a particular carriers nbh file.. so you can probably just flash the orange nbh without the goldcard [just renamed DREAIMG.nbh on the root of your SDCard], then follow the 2708+ radio instructions.. or install 1.33.2003/5 via fastboot if you need the old radio.
The reason I'm pointing to the orange nbh is it will let you bypass the whole "I bricked my phone because I insisted on flashing death SPL via recovery" since you have an engineering SPL and 2.x radio after flashing that orange NBH from the 2708+ thread.
This is what worked for me, going from:
- a non responsive recovery
- OS locked at activation, so no usb debugging
- OS refused to root
- quadicolored fastboot screen that wouldnt recognize usb
To CM5 2708+ with RA-cyan1.7.
Before this thread I had to use this to get post the verizon data plan only activation to enable usb debugging.
Made a goldcard
Put the orange nbh renamed to DREAIMG.nbh (can't remember where i got it from, just searched) on the goldcard, Booted with camera+power to get fastboot, and applied the update.
Followed ezterry's post and at step 5 flipped over to this post on CM5 2708+
Now I'm gonna update the radio using exterry's advanced zips. Thanks again everyone, another successful thread.