i just rooted my g1 with the amon ra recovery img and i installed kingklicks new 2.2 rom and wen i reboot the pone is stuck at the tmobile screen...ne help
do you have the proper radio and spl? if not, flash the radio first so you don't turn your phone into a paper weight.
bonkasnucca said:
i just rooted my g1 with the amon ra recovery img and i installed kingklicks new 2.2 rom and wen i reboot the pone is stuck at the tmobile screen...ne help
Click to expand...
Click to collapse
Did you wipe before flashing? How is your sdcard partitioned?
Related
hello, I made the following steps: (I try to flash Jachero 2.3.5)
1) Install RC29
2) Install recovery image 1.3.1
3) Flash latest radio: ota-radio 2.22.19.2.6I
4) Flash latest spl: 1.33.2005
... and when I try to reboot, the phone stay stuck in the G1 screen.
What I'm doing wrong ?
Do you have root? If you do which im hoping is true try reformating your sd card cuz sometimes whenyou flash different roms some of the old stuff stays even after reflashing
hope that helps
you might have a brick, after flashing the SPL you are supposed to have another sd card with another ROM(or the same ROM) on it to reflash, if not you can get a brick
Sounds like you just need to reload your rom on. Once you flash the spl you need to reflash your rom otherwise you will be stuck at the g1 screen due to the fact you don't have a rom loaded on your phone because the spl update overwrites your rom.
It's Normal, i went through the same thing. After installing the SPL you have to re flash your ROM. im no expert but what i did was:
Note: i added the cyanogen recovery image 1.3.1 and also i have ROOT,
I had Cyanogen 3.6 rom so i flashed the radio then spl. and got the g1 screen.
then i flashed 3.6 rom on again. (turn on phone with power+home, alt+w to wipe, alt+s to install)
After it loaded the cyanogen 3.6 so i checked the settings to make sure i had the right spl and radio. and then i just flashed the JACHero rom. just like i did with the Cyanogen rom.
Probably dont have to reflash the cyanogen rom i was just being careful.
Just mount your sdcard in recovery. Boot into recovery and press alt+x. Now type:
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
Remove the update.zip,and place your ROM of choice on the sdcard. Rename it to update.zip. In recovery console type "reboot recovery". Now wipe and flash away =]
okay this is what ive done...i use the flash rec apk and then backup and applied the ra recovery img. now i can go to the recovery mode...can i apply any rom not knowing the spl?...also one last question.... if i need to unroot do i do this by appliying the dreamin.img by pressing the end and camera then apply and this should unroot it right????
oh yeh i came from a cupcake build...on my g1
To get back to stock you flash the DREAIMG.nbh in bootloader. You need the 1.33.2005 SPL to flash a hero rom and a few others, but they will state that in the OP. You can flash any other rom though.
SUPER handy for partitioning SD cards!
jndd333 said:
SUPER handy for partitioning SD cards!
Click to expand...
Click to collapse
huh? what are you talking about.
hey..
okay i flash my g1 with flash rec.apk then i applied the recovery image and now i applied the 4.1999 rom from cyanogen but i wanted to try the blur rom...so i applied that...now if i go back to cyanogen rom do i need to get the 1.6 adp from dev site then apply the 4.1999 rom???
xghostyxjokerx said:
okay i flash my g1 with flash rec.apk then i applied the recovery image and now i applied the 4.1999 rom from cyanogen but i wanted to try the blur rom...so i applied that...now if i go back to cyanogen rom do i need to get the 1.6 adp from dev site then apply the 4.1999 rom???
Click to expand...
Click to collapse
there is a single flash version of 4.1.999 look for it in the dev section.
okay so i had to flash and downgrade back to RC29 from Froyo roms, i rooted, then upgraded my Radio, and also flashed Hard SPL. but when i try to flash Danger SPL it wont change, i check my boot loader and it still keeps saying hard spl is still installed.
note: im using amon ra 1.7.0 recovery
Solved: used Amon RA 1.5.2
Bzerk1 said:
okay so i had to flash and downgrade back to RC29 from Froyo roms, i rooted, then upgraded my Radio, and also flashed Hard SPL. but when i try to flash Danger SPL it wont change, i check my boot loader and it still keeps saying hard spl is still installed.
note: im using amon ra 1.7.0 recovery
Solved: used Amon RA 1.5.2
Click to expand...
Click to collapse
Before Danger You must need to Flash your RADIO first and then reboot and try flashing Danger.
Bzerk1 said:
okay so i had to flash and downgrade back to RC29 from Froyo roms, i rooted, then upgraded my Radio, and also flashed Hard SPL. but when i try to flash Danger SPL it wont change, i check my boot loader and it still keeps saying hard spl is still installed.
note: im using amon ra 1.7.0 recovery
Solved: used Amon RA 1.5.2
Click to expand...
Click to collapse
It is obviously smarter than you.
DO NOT FLASH DEATHSPL!!!! There is NO BENEFIT to it.
Use 1.33.2003. Be safe -- don't brick yourself.
If you want deathspl's partition mapping, use this instead: http://forum.xda-developers.com/showthread.php?t=717874
** NO NEED TO RISK A BRICK!!!
hello
i try to flash cwm 2.5.0.7 on my g1 with RA 1.7.0 installed but now i have no access to my recovery. the device stay on the G1 splash screen.
I try to flash again RA 1.7 but i got an error message...
Is anyone know what i have to do?
G1 rooted
s off hboot 1.33.2005
cpld4
radio 2.22.23.02
thanks
thi3um said:
hello
i try to flash cwm 2.5.0.7 on my g1 with RA 1.7.0 installed but now i have no access to my recovery. the device stay on the G1 splash screen.
I try to flash again RA 1.7 but i got an error message...
Is anyone know what i have to do?
G1 rooted
s off hboot 1.33.2005
cpld4
radio 2.22.23.02
thanks
Click to expand...
Click to collapse
How are you flashing the recovery.....flash it through fastboot...
fastboot flash recovery [recovery.img]
you should be good with it...if you will still face the issue please post how you are flashing the recovery and what error you are getting.
That's ok for me I could flash cwm 2.5.0.7 via rommanager
I'll try to flash RA another time (using terminal emulator)
Id anybody know how to see witch kernel is uses in a rom (in order to flash a custom sol)
Thank's
Ok for RA i flash it again while i install the new radio and the New spl
Sent from my Legend using XDA App
Hi there. I just got my G1 as a backup phone, and I am having issues with flashing CWM. When I flash it, I choose "HTC Dream", and it flashes successfully. However, when I try to boot into CWM, it will just hang at the G1 splashscreen. I have noticed Amon_RA recovery works fine, but the ROM I want to use (COS-DS) is recommended to be flashed with CWM. I have tried formatting the SD card and reflashing already (many times). I also tried the experimental versions of CWM but they will not flash at all. If it helps, my buddy installed SuperD (a donut ROM) on this G1 before he gave it to me.
My G1 is a 32B PVT device, with the Engineering S-OFF, HBOOT 1.33.2005 (DREA10000), Radio 2.22.23.02, and CPLD-4.
NikolaiT said:
Hi there. I just got my G1 as a backup phone, and I am having issues with flashing CWM. When I flash it, I choose "HTC Dream", and it flashes successfully. However, when I try to boot into CWM, it will just hang at the G1 splashscreen. I have noticed Amon_RA recovery works fine, but the ROM I want to use (COS-DS) is recommended to be flashed with CWM. I have tried formatting the SD card and reflashing already (many times). I also tried the experimental versions of CWM but they will not flash at all. If it helps, my buddy installed SuperD (a donut ROM) on this G1 before he gave it to me.
My G1 is a 32B PVT device, with the Engineering S-OFF, HBOOT 1.33.2005 (DREA10000), Radio 2.22.23.02, and CPLD-4.
Click to expand...
Click to collapse
From my experience with ROM Manager/ClockworkMod. The recovery do not work well. I recommended that you stay away from it.
Amon RA works fine without CWM.
I had the same problem when I first started flashing ROM. My big mistake was to start using it. Took me about a few months to realize that it does not work well and it will hang at the G1 screen.
Now I see that they still have not fix this problem. LOL!
BeenAndroidized said:
From my experience with ROM Manager/ClockworkMod. The recovery do not work well. I recommended that you stay away from it.
Amon RA works fine without CWM.
I had the same problem when I first started flashing ROM. My big mistake was to start using it. Took me about a few months to realize that it does not work well and it will hang at the G1 screen.
Now I see that they still have not fix this problem. LOL!
Click to expand...
Click to collapse
I agree!! 100% CWM doesnt work as well as RA and personally that COS-DS rom isn't that great... froyobylazslo is way better!!! but if you really want cwm that just downlaod "rom manager" from the market and apply/flash cwm through there... very simple
ldrifta said:
I agree!! 100% CWM doesnt work as well as RA and personally that COS-DS rom isn't that great... froyobylazslo is way better!!! but if you really want cwm that just downlaod "rom manager" from the market and apply/flash cwm through there... very simple
Click to expand...
Click to collapse
That is how I flashed CWM...
NikolaiT said:
That is how I flashed CWM...
Click to expand...
Click to collapse
If you already installed Amon RA, then I would recommend uninstalling CWM. Then you should be able to get into the Recovery Mode.
If you have not, I suggested that you do. Then uninstall the CWM.
It is not that hard to boot into Amon RA recovery and do what you need to do. I found out that it is easier than trying to use ROM Manager/CWM.
Also, you might want to try different ROM (IE: froyobylazslo, gengerbread yoshi, or even SuperAosp) if you are so incline to use CWM.