Hi mates
I`m using HTC Touch Pro, branded by T-Mobile germany (mda vario 4) with EnergyROM Photon (build 21864). I have a build-in bluetooth device in my car (original bmw e90). Usually I can connect my phone with BT system in the car and use it, now i got a headset Planctronics Discovery 925. I tried to establish the connection via BT in the car, HTC Touch Pro and Planctonics Headset, all 3 dev. in the same time, but dont know how. Is it possable? Cuz i want to make the conversation private and public. Private via Planctonics Headset and publice via BT System in the car.
Please HELP!!!
your BMW's bluetooth connects automatically to your phone , the only way to make it connect to your bluetooth headset is disconnecting the phone thru the voice menu of the BMW, then choose the headset on the phone's bluetooth menu
i have a mazda 3 2010 and it does the same thing.
THX for your answer. Well this means there is no way to connect 2 devices to my htc phone at the same time? . According to wiki link KLICK, the master BT device can communicate up to 7 devices.
Related
I know this is for only XDA devices, & I tried searching but I didnt see anything except for 1 post. http://forum.xda-developers.com/viewtopic.php?t=11128&highlight=nokia+car+kit
But I thought I might try you guys here.
I have posted on other HP related sites as well for the same problem.
This site was so usefull when I had my Siemens SX56.
The only thing I wanted to know is if anyone knows if there is any add on driver I can add to it to make the hp6315 bond with my nokia bluetooth carkit model # CARK112.
I cant seem to get it to bond?
I did get my Jabra BT200 to bond and work correctly.
This is what nokia says about it?
*Compatible phones must support the Bluetooth 1.1 specification and Handsfree profile.
As far as I know the hp 6315 doesn't support handsfree only headset?
Any help would be greatly appreciated.
...have you tried the "explore a BT device" in the BT connection wizard, not the "handsfree/headset" set-up? I paired it together once & it worked fine...I do beleive this "widcomm stack of BT" supports handsfree...
BTW, after I added another headset (my SE HBH-65) it didn't connect again, but BT is funny/finicky doing multi-device connxns...
Nokia Carkit with HP6315??????
Thanks , I will try that I will let you know.
...another tip...even better tyhan the last one that I don't think is necessary if you use this one : when pairing h-set/handsfree device about half way thru the wizard hit the tools button (I think?) & it default-checks, "show only handsfree devices", uncheck that & you should now see the carkit show-up! This of course makes no sense since the carkit is a handsfree device but it seems to work so go with it...
thanks that did the trick!!!!!!
I just yest spent some extended time with CarKit (it in my wife's car) & it wasn't very reliable. After turning the car off & then back on it would not re-establish a pairing. After resetting both iPaq & carkit (turning off & on again, I'd go thru the wizard again & it would re-establish but would duplicate the carkit on the iPaq...
Has your kit been more reliable? (I have the nokia Cark112)
nokia car kit with ipaq
No. mine has been doing the same thing.
...ya, my work around has been to delete the previous carkit pairing & re-establish itself - a new one - obviously not great but workable if you need it...btw, every Nokia phone (even the newest ones) work fine with this kit...so who knows - I may get the Nokia 9500...
Hi all,
i recently upgraded my qtek 9090 to 1.42 (Tmobile posted BA_TMNL_14200_115_11300_Ship). I have major problems connecting to my handsfree set in my car. The first try to connect is successfull. I can pair with the handsfree device, enter the security code and everything is fine. The device appears in bluetooth manager under paired devices.
After disonnecting the paired devices rapidly gets lost. After that, theres no chance to connect to the device again. The only chance is to delete the bluetooth device in the manager and pair it again.
Despite to this, if have no problems with my gps mouse. Security is disabled, the device also don't appears in paired devices
Has anyone an idea ?
BT Version is 1.0.0 3900
I think I found the problem. Seems, that my handsfree set in my car still had the connect information of the former installation and I still use the same name for bluetooth. The handsfree set can save the connect information of 3 devices and two of them had now the same name but different id's. Seems, that was the problem. I'll test it for some days, but I'm sure, that was the solution
have fun
BT headset is paired but gets lost
my MDAIII has just been updated to the latest Tmobile upgrade.
Everything works ok. BT headset pairs and when i make a call i can speak. But when i receive a call the connection with the headset has a '?'
Now i first have to search to get a connection.
It's like it switches off the BT Headset connection when I receive a call.
Does anyone know how to solve this?
Hello,
I searched a program for my Kaiser that disconnects a BT device, such as carkit or headset, when a call is finished.
With disconnecting I mean that the device is not connected anymore at that moment.
So when I have an incoming phonecall, I have to push to connect my BT device to my phone. Then I can pick up the phone with my device.
Who knows were I can find this?
Thanks,
Temba
Hmm, I don't see the point.
When an incoming call is received, before it starts ringing the Kaiser will look for a known paired BT device, if it is on but not connected it will connect it automatically. If it's not on at that moment you're out of luck for that call.
Just leave your device connected... you should already have to push on your device to take the call, no?
Kilrah,
The point is that when I end a call, I want that my BT device disconnects from my phone. Reason is that when I walk to my car, I want to use my BT carkit and not my headset.
Maybe I had to ask how I can unpair a BT device from my phone after a call. But 'unpairing' is for me that I have to enter a pincode every time I want to connect.
Any ideas?
Temba
Hi,
This is an issue between HTC Windows Mobilie devices and carkits equiped with a parrot chip.
As far as I've understood all Windows Mobile 6.1 devices are affected.
I myself have a Kenwood DNX 8220 BT Double DIN Head Unit in the car but there are more Head Units and carkits that make use of the Parrot chip CK5050 if I'm not mistaken.
Does anyone have a tweak or a registry setting that is able to fix this?
I've allready tried to change the COD registry value to: 52020C which is suggested as a solution in a parrot forum topic:
http://www.parrot.com/forums/english/viewtopic.php?id=5620
It didn't solve the issue
tembares said:
Kilrah,
The point is that when I end a call, I want that my BT device disconnects from my phone. Reason is that when I walk to my car, I want to use my BT carkit and not my headset.
Click to expand...
Click to collapse
Oops, had missed this reply back then. I know it's way old, but as someone brought this thread up again, never know if you might read it...
AFAIK this isn't possible. If you have 2 BT devices, paired and powered on but not connected, when a call is received / placed form the phone it will use the last one that has been either connected or selected and "Set as hands free" in the BT settings. If you want to make sure the phone connects to one of them without you going in the BT settings and set it as hands free, you need to turn the other one off.
Please only repond to this if you have solved carkit issues.
I have a JVC AVX33 headunit with bluetooth, worked perfect on my old SE K800i, however on my diamond it keeps "booting" the bluetooth connection.
Connects for 30 seconds, looses connection, and connects again.
Is there a possible fix for this?
New Bluetooth Stack?
Tweak?
Or an explanation to why this is happening?
It Renders my Diamond useless in my car setup, and this would meen the world to me to have fixed.
Would purchasing a PARROT bluetooth carkit solve the problem?
Do you search the carkit with the phone or vice versa let the carkit search the phone?
I would recommend to test both setups. Do not forget to make your phone visible for the carkit when you want to pair it. Are you able to enter the bluetooth pair code on the phone when requested?
Hi, i have a Pioneer deh-p9800bt with bluetooth handsfree function and the only way to use it with wm6 and 6.1 (Htc Jamin, Gsmart i120 and Gsmart T600) has been to install Jetware HandsFree Extension. With the Gsmarts the Pioneer connects automatically and all works perfectly, with the Diamond the connection must be started every time from the Pioneer, but, then, all works (also battery and signal level): i think that a registry tweak has to be made in order to have an automatic connection.. i will try to see the differences between the registry settings of the i120 and the Diamond..
Yes i tried pairing both ways phone -> headunit and visa versa, and i am able to pair the two devices with code. However it keeps booting the bluetooth, looses connection and then getting it again. About every 30 seconds.
And i tried JETware yesterday without any change, however i am going through the different JETware config add-ons today to see if the result is better.
I think that its when the phone is trying to update the contact list to the headunit, it crashes the bluetooth. Anybody know if it is possible to change the bluetooth stack driver with another? on the HTC Touch Dual i had previous the bluetooth worked just fine.
bump bump bump
OK - bit of a strange one...
I have a much loved kaiser and a powered car-cradle so i can use it for navigation and speakerphone calls whilst driving.
I also have a Blackberry for work but no car cradle for that, so I can't legally make / receive calls whilst driving in the UK.
Now i'm too cheap to buy a proper bluetooth carkit / visor / headset or pay for call forwarding so I wonder if it's possible to pair up the BlackBerry with the Kaiser so that calls to/from the Blackberry can be conducted using the cradled Kaiser as a speakerphone.
i can pair the devices successfully and even get a prompt on the kaiser asking if i want to use the blackberry as carkit, but can't seem to get the reverse to happen.
Conceptually, is this possible and if so, what drivers or software might i need for either device?