Recently got a G1 off a friend as tempory fix until my replacement X10 arrives.
Phone is currently locked to T-Mobile and I don't have an active T-Mobile sim card.
I've been following the guides on rooting it but I've ground to a halt.
I've flashed the ROM back to the earlier T-Mobile ROM (i.e. before the exploit was patched) as per the guide, but now, because the sim card in the phone isn't active, I can't log in to my google account to get onto the actual handset.
Any possible work around for thid?
Before I flashed it, the ROM that was originally on it allowed me to skip this login step and connect via my Wi-Fi.
I hope you do know, unlocking and rooting are two different things.
Yes.. hence I listed flashing, rooting and sim unlocking as 3 seperate proceedures.
http://forum.xda-developers.com/showthread.php?t=452316 should help you
Although if you sim-unlock it (since you're not a T-mobile customer you would have to buy a code from numerous ebay/craigslist sellers) you could just use your simcard to go through activation (look in the big APN thread for your settings)
That thread is big help, thanks!
Still stuck though, I've got DroidExplorer and all the other software needed installed, however I need to get USB debugging enabled on the phone.
I cannot do this without gaining access to the phone itself.
Going round in circles here!
No one?
Hello every one here is my story
i bought G900F HongKong Version.
started the rooting method as in this Thread http://forum.xda-developers.com/galaxy-s5/general/how-to-root-triggering-knox-2nd-method-t2843044
after reading and collecting the file, i restarted my phone to the download mode, and there i found the gateway to what seems to be a new phone nightmare.
in the download mode it show the model G900A (not G900F) the phone is brand new came with all G900F package and software. i also checked the IMEI and it show that my phone is G900F.
an hour ago i decided to go with rooting method in the above link, but odin wont flash the kernel. so i posted the issue in the above Thread, and i been told that my phone bootloader might be looked, and in this case its not G900F but instead it G900A, also i been told to search in the AT&T on how to check my boot loader status, but i could not find any clue, also google has no info on how to check my bootloader status.
Attached some photos of my phone details via Phone info app, and also attached the error from the download mode on the phone.
So fat my phone is still a live, i have not put my sim card inside yet (need to change it to nano sim first)
Thank you all
You try this @ command prompt.
getprop ro.bootloader
screem_3 said:
Hello every one here is my story
i bought G900F HongKong Version.
started the rooting method as in this Thread http://forum.xda-developers.com/galaxy-s5/general/how-to-root-triggering-knox-2nd-method-t2843044
after reading and collecting the file, i restarted my phone to the download mode, and there i found the gateway to what seems to be a new phone nightmare.
in the download mode it show the model G900A (not G900F) the phone is brand new came with all G900F package and software. i also checked the IMEI and it show that my phone is G900F.
an hour ago i decided to go with rooting method in the above link, but odin wont flash the kernel. so i posted the issue in the above Thread, and i been told that my phone bootloader might be looked, and in this case its not G900F but instead it G900A, also i been told to search in the AT&T on how to check my boot loader status, but i could not find any clue, also google has no info on how to check my bootloader status.
Attached some photos of my phone details via Phone info app, and also attached the error from the download mode on the phone.
So fat my phone is still a live, i have not put my sim card inside yet (need to change it to nano sim first)
Thank you all
Click to expand...
Click to collapse
according to the BL screen its an G990A (which is the AT&T US model complete with Locked bootloader) but according to the other screens it seems to be a Canadian version which i believe is a W8 the baseband is ND3 which either the Canadian or U.S. model have. unfortunately it look like you may have bought brick. Try using Odin to flash everything back to Stock but Im not even sure what firmware to tell you to look for. my best guess would be to go by the Download screen and use the AT&T U.S. firmware try using this thread as a guide http://forum.xda-developers.com/showpost.php?p=55133105&postcount=1
deleted
Thank you all for your replies, i talked with the seller and even he does not know how this happen, my guess it might be a refurbished phone, anyway i am returning it, and will try to get G900F European version.
I am lost. I have been reading through hours of material and am still not sure what to do. I purchased my att samsung galaxy note 3 n900a from a friend and it seems it use to be rooted. It has a custom recovery. I was able to verify the imei is good with att but had to use a program to locate it. My baseband is blank. It shows I have android 5.0 and that build is lrx21v. N900aucueoc2 4335446. But when I run a firmware test to see what I need to download (if that's even what I should be doing) it shows my phone is n900aucubmi9 android 4.3. My kernel shows 3.4.0-4335446. I'm not sure where to start for all the issues the phone has and I'm not sure I should download the 4.3 firmware when it's currently on 5.0. Please help.
hbaca25 said:
I am lost. I have been reading through hours of material and am still not sure what to do. I purchased my att samsung galaxy note 3 n900a from a friend and it seems it use to be rooted. It has a custom recovery. I was able to verify the imei is good with att but had to use a program to locate it. My baseband is blank. It shows I have android 5.0 and that build is lrx21v. N900aucueoc2 4335446. But when I run a firmware test to see what I need to download (if that's even what I should be doing) it shows my phone is n900aucubmi9 android 4.3. My kernel shows 3.4.0-4335446. I'm not sure where to start for all the issues the phone has and I'm not sure I should download the 4.3 firmware when it's currently on 5.0. Please help.
Click to expand...
Click to collapse
Not sure what it takes to get someone to reply on this but ok..... i was able to get a sim card and put service on it and it has made the phone work every now and then. It keeps slipping back into no mobile network and stops working though. I have updated the apn settings to the correct options. Still when it turns the network off it goes back to no baseband showing, no imei, tells me to insert sim. I'm wondering if it has something to do with the custom recovery that I have on it. I'm honestly not sure CAUSE IM NOT ABLE TO GET ANY FEEDBACK.
hbaca25 said:
Not sure what it takes to get someone to reply on this but ok..... i was able to get a sim card and put service on it and it has made the phone work every now and then. It keeps slipping back into no mobile network and stops working though. I have updated the apn settings to the correct options. Still when it turns the network off it goes back to no baseband showing, no imei, tells me to insert sim. I'm wondering if it has something to do with the custom recovery that I have on it. I'm honestly not sure CAUSE IM NOT ABLE TO GET ANY FEEDBACK.
Click to expand...
Click to collapse
I am no expert on this, and cannot offer much advice for it may violate the terms of this site. BUT, it sounds like you have a corrupt EFS partition, which is where the IMEI is stored. It is possible to set it right, but for that, you have to do your own research. Searching these forums for threads related to fixing EFS should be a good place to start.
Please note that I do not know if this is the case with your device. Its just where I would start my search. Good luck!
got a new nexus 6 for Christmas and it won't read any of the sim cards i have (tried 2 T-mobile and an at&t sim) so after digging around a bit i see that the IMEI and Basband are both listed as "Unknown" from what i've gathered this likely means my radio needs to be re-flashed, but this is a brand new device and i don't want to unlock the bootloader and risk not being able to return it if that doesn't fix the issue. is there anything else i can do? or should i just send it back for a return.
it's an xt1103 (US version) i was able to update it to 6.0.1 with OTA updates from google (over wifi), should these updates have flashed the radio? (it started out at 5.1 but still had unkown IMEI/Baseband)
looks like the best thing to do is probably just exchange it for a new one, hopefully i can do that tomorrow.
found this thread which seems to be the same issue: http://forum.xda-developers.com/nexus-6/help/nexus-6-sim-message-baseband-info-t3273190
this thread can be closed.
Hi. I am a complete noob when it comes to rooting Android.
**************************UPDATE************************************************
THIS ISSUE HAS BEEN SOLVED. PLEASE SCROLL TO POST #89 ON PAGE 9 TO SEE THE SOLUTION.
https://forum.xda-developers.com/showpost.php?p=77950935&postcount=89
***************************************************************************************************
I bought an *unlocked* Samsung Note 9 N960F/DS (Exynos 9810) international phone from a seller on ebay brand new and sealed. Received the phone yesterday (10/19/2018) and popped my working existing sim card from my iphone 6 with T-mobile into the new phone and it *worked*.........except no wifi calling.
Since my house has terrible reception I really do need wifi calling in order to receive calls (I use Skype for outbound). I decided to root and install Detonator (tekhd) even though I've never done this before. Somewhere along the line I messed up and installed the latest LUX ROM because I misred Tekhd's guide on Detonator (my fault).
Here's where I stand now: I found a stock ROM for this model (N960F/DS) and reinstalled it using Odin3 v3.13.1.
After a successful flash when I insert my working T-mobile sim I get "SIM network PIN blocked. Enter SIM network PUK."
Here the Service Provider SW shows XEU/XEU,XEU/MYM
I get the *same* message when I insert a spare T-mobile sim I happened to have that was confirmed as available with T-mobile customer service. If I take the working sim out and put it back into the other phone it works without a problem. I think that rules out the sim cards having issues.
Earlier when I had the phone rooted and Detonator installed (and working), I got a different message when I inserted the SIM:
Network Lock: This device can be remotely unlocked if eligible.
Please use the "Device Unlock" application to unlock the device.
Make sure the device has an internet connectivity to use the "Device Unlock application".​
Here the Service Provider SW showed TMB/TMB/MYM.
I tried looking for a T-mobile Unlock App apk to download but could not find a recent one. I would get a "Device not supported" error. It seems T-mobile has taken it off the Playstore.
Now, I can't install a stock USA ROM from T-mobile because those ROMS are only for the Snapdragon versions and I have the Exynos chip. I was given two unlock codes over the phone with T-mobile customer service to try and unlock the Pin lock but they both did not work.
Do you think an unlock service will be able to provide me with a valid "Sim Network PUK" code? I'm happy to pay for the service if I can just get the damn phone working. I've spent almost $770 on this phone and in hindsight should just have gotten the T-mobile branded phone for $100 more. I'm really at a loss as to what I can do to rectify this situation.
Also in hindsight I should have done more research before purchasing the phone and also should have backed up my partition in TWRP........You live and you learn.
The irony here is that I had an unlocked phone.....and now it has somehow gotten locked.........by the carrier whose SIM card is working perfectly fine......in a different phone. The device was paid in full btw.
Any help is greatly appreciated. Thank you in advance.
orsonwells456 said:
Hi. I am a complete noob when it comes to rooting Android.
I bought an *unlocked* Samsung Note 9 N960F/DS (Exynos 9810) international phone from a seller on ebay brand new and sealed. Received the phone yesterday (10/19/2018) and popped my working existing sim card from my iphone 6 with T-mobile into the new phone and it *worked*.........except no wifi calling.
Since my house has terrible reception I really do need wifi calling in order to receive calls (I use Skype for outbound). I decided to root and install Detonator (tekhd) even though I've never done this before. Somewhere along the line I messed up and installed the latest LUX ROM because I misred Tekhd's guide on Detonator (my fault).
Here's where I stand now: I found a stock ROM for this model (N960F/DS) and reinstalled it using Odin3 v3.13.1.
After a successful flash when I insert my working T-mobile sim I get "SIM network PIN blocked. Enter SIM network PUK."
Here the Service Provider SW shows XEU/XEU,XEU/MYM
I get the *same* message when I insert a spare T-mobile sim I happened to have that was confirmed as available with T-mobile customer service. If I take the working sim out and put it back into the other phone it works without a problem. I think that rules out the sim cards having issues.
Earlier when I had the phone rooted and Detonator installed (and working), I got a different message when I inserted the SIM:
Network Lock: This device can be remotely unlocked if eligible.
Please use the "Device Unlock" application to unlock the device.
Make sure the device has an internet connectivity to use the "Device Unlock application".
Here the Service Provider SW showed TMB/TMB/MYM.
I tried looking for a T-mobile Unlock App apk to download but could not find a recent one. I would get a "Device not supported" error. It seems T-mobile has taken it off the Playstore.
Now, I can't install a stock USA ROM from T-mobile because those ROMS are only for the Snapdragon versions and I have the Exynos chip. I was given two unlock codes over the phone with T-mobile customer service to try and unlock the Pin lock but they both did not work.
Do you think an unlock service will be able to provide me with a valid "Sim Network PUK" code? I'm happy to pay for the service if I can just get the damn phone working. I've spent almost $770 on this phone and in hindsight should just have gotten the T-mobile branded phone for $100 more. I'm really at a loss as to what I can do to rectify this situation.
Also in hindsight I should have done more research before purchasing the phone and also should have backed up my partition in TWRP........You live and you learn.
The irony here is that I had an unlocked phone.....and now it has somehow gotten locked.........by the carrier whose SIM card is working perfectly fine......in a different phone. The device was paid in full btw.
Any help is greatly appreciated. Thank you in advance.
Click to expand...
Click to collapse
this is a first. I always though once the region lock was lifted it couldn't be relocked( to me it seems to be a region lock issue, which if it is you need to make a 5 min call on region soil... good luck)
anyways check on your box there is a sticker with model and serial . find what carrier or region its from and grab that firmware and flash it. might want to factory wipe everything (including cache) in the recovery before booting it up indownlaod mode to do Odin flash.
also remove sim before wiping/ flashing, let it boot and do the initial setup then insert sim.
bober10113 said:
this is a first. I always though once the region lock was lifted it couldn't be relocked( to me it seems to be a region lock issue, which if it is you need to make a 5 min call on region soil... good luck)
anyways check on your box there is a sticker with model and serial . find what carrier or region its from and grab that firmware and flash it. might want to factory wipe everything (including cache) in the recovery before booting it up indownlaod mode to do Odin flash.
also remove sim before wiping/ flashing, let it boot and do the initial setup then insert sim.
Click to expand...
Click to collapse
I did wipe and reinstall the stock rom with the sim removed. The strange thing is..........I get the same message if I insert an old, blank, unused t-mobile sim into the device. Plus the working sim works fine in my old phone. So how could it be that the sim is locked?
There is nothing on the box that says anything about a carrier. This was advertised and sold as a factory unlocked phone which by all indications it does seem to be. The only thing on the box that says anything about country is that it was manufactured in vietnam.
orsonwells456 said:
I did wipe and reinstall the stock rom with the sim removed. The strange thing is..........I get the same message if I insert an old, blank, unused t-mobile sim into the device. Plus the working sim works fine in my old phone. So how could it be that the sim is locked?
There is nothing on the box that says anything about a carrier. This was advertised and sold as a factory unlocked phone which by all indications it does seem to be. The only thing on the box that says anything about country is that it was manufactured in vietnam.
Click to expand...
Click to collapse
no sticker with device model or anything? not even in the back of the phone when it was new? a white sticker
bober10113 said:
no sticker with device model or anything? not even in the back of the phone when it was new? a white sticker
Click to expand...
Click to collapse
Yes there are stickers. But it is not associated with a carrier, specific region, or country. I just see IMEI info on the sticker on the back of the phone and S/N.
orsonwells456 said:
Yes there are stickers. But it is not associated with a carrier, specific region, or country. I just see IMEI info on the sticker on the back of the phone and S/N.
Click to expand...
Click to collapse
nothing like
SM-N960FOYAU1MYM or something?
bober10113 said:
nothing like
SM-N960FOYAMYM or something?
Click to expand...
Click to collapse
Ah ok. SM-N960FZBDMYM
bober10113 said:
nothing like
SM-N960FOYAU1MYM or something?
Click to expand...
Click to collapse
btw I think detonator zip backup efs partition. did your issues arise before it after flashing it? if after try to find the backup and refresh it
bober10113 said:
btw I think detonator zip backup efs partition. did your issues arise before it after flashing it? if after try to find the backup and refresh it
Click to expand...
Click to collapse
I was a dumbass and did not backup. I had zero issues other than no wifi-calling before trying to root and flash detonator...... Thank you for your help.
I went to a site with all "official" downloads and I don't see anything for ZBDMYM........
orsonwells456 said:
I was a dumbass and did not backup. I had zero issues other than no wifi-calling before trying to root and flash detonator...... Thank you for your help.
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-N960F/region/MYM/
did you flash one of these?
these should be the original firmware U1 and the lates U2 which if you flash wint be able to downgrade bootloader but shouldn't be causing rhe sim lock issue.
flash U1 first and see if it fixes your issue. then try the October U2 just for fun
you can also download it using samfirm tool
enter 960F and MYM in settings it should also be a faster download then the web links
bober10113 said:
https://samsung-firmware.org/model/SM-N960F/region/MYM/
did you flash one of these?
these should be the original firmware U1 and the lates U2 which if you flash wint be able to downgrade bootloader but shouldn't be causing rhe sim lock issue.
flash U1 first and see if it fixes your issue. then try the October U2 just for fun
Click to expand...
Click to collapse
My baseband version currently shows N960FXXU2ARH7 and Service Provider SW Ver. shows XEU/XEU, XEU/MYM. I will try loading U1 first and see what happens.
orsonwells456 said:
My baseband version currently shows N960FXXU2ARH7 and Service Provider SW Ver. shows XEU/XEU, XEU/MYM. I will try loading U1 first and see what happens.
Click to expand...
Click to collapse
ok so it's too late for U1 . ure phone is already on U2 latest bootloader. so flash the October build
but be sure to wipe all with no sim before flashing
and in Odin fill in all slots and for csc use CSC but not HOME csc file.
good luck
bober10113 said:
ok so it's too late for U1 . ure phone is already on U2 latest bootloader. so flash the October build
but be sure to wipe all with no sim before flashing
Click to expand...
Click to collapse
Should I take out sim, use TWRP to wipe, then go into download mode, Odin3=> flash rom? Thanks.
orsonwells456 said:
Should I take out sim, use TWRP to wipe, then go into download mode, Odin3=> flash rom? Thanks.
Click to expand...
Click to collapse
yeah might as well use tarp. and erase all. but before, did you sift through internal s or ext s for an efs backup that detonator might have made automatically?
check for a folder called .backup and or for a file like:
efs_backup.img.gz
efs_backup.img
or anything similar
bober10113 said:
yeah might as well use tarp. and erase all. but before, did you sift through internal s or ext s for an efs backup that detonator might have made automatically?
Click to expand...
Click to collapse
No, but I did download Dr. Ketan's tool to make an efs backup. But that was way later in the process....so it wasn't the original efs directory......It was after I flashed my current "stock" rom. I'm going to try and find another site to download since that one will take 2 days on slow speed......
Btw what does the ZBD mean? MYM I figured is Myanmar......
orsonwells456 said:
No, but I did download Dr. Ketan's tool to make an efs backup. But that was way later in the process....so it wasn't the original efs directory......It was after I flashed my current "stock" rom. I'm going to try and find another site to download since that one will take 2 days on slow speed......
Btw what does the ZBD mean? MYM I figured is Myanmar......
Click to expand...
Click to collapse
probably a date code of some sort. Samsung mashes a bunch if letters to come up with country,date code. just Google it.
but try samfirm 3.6 tool to dl
https://1drv.ms/f/s!AhXVLDDj8g3AgdJZClzJmsN17YL2CQ
I am using Samfirm and found this;
Model: N960F
Region: MYM
File: N960FXXU2ARJ1/N960FOXM2ARJ1/N960FXXU2ARJ1/N960FXXU2ARJ1
Verions: N960F_1_20181001162540_w0h1lv73k8_fac.zip.enc4
If Install this ROM, does this mean my phone will be region locked to MYM again? I'm definitely confused on this......
orsonwells456 said:
I am using Samfirm and found this;
Model: N960F
Region: MYM
File: N960FXXU2ARJ1/N960FOXM2ARJ1/N960FXXU2ARJ1/N960FXXU2ARJ1
Verions: N960F_1_20181001162540_w0h1lv73k8_fac.zip.enc4
Click to expand...
Click to collapse
yeah looks good. its October 1st build
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
orsonwells456 said:
If Install this ROM, does this mean my phone will be region locked to MYM again? I'm definitely confused on this......
Click to expand...
Click to collapse
well ure screwed either way. the goal is to restore everything back to stock and see if you can get a line working
btw was there a seal on the box that you had to break in order to open the box when you first got it?