i have htc hd new buy,,problem is i downloads rom energy rom ... and my pda to slow... i waant change back rom original... but activesynic canot link my computer,,, before problem,, i can link my computer.. so anbody out side there
helpppppppppppp meee... plzzzzzzzzzzzzzzzz
1st you need to say witch ROM you flash Exactly because they are many NRG Rom`s
2nd You say its a brand new Phone so i guess you was with Stock WM 6.1 so the question is do you read here the info and how you flash the Phone?
3rd You didnt tell what is the ROM WM 6.1 or 6.5 and alot more things..
If you want really someone to help you with this info that you provide to us, be sure no one can tell you anything.
Please post in Blackstone Forums!
Also you should read the Blackstone Wiki. It will help you to understand what to do.
if activesync no longer works for you, connect the phone to the computer with a cable (as you would normally) then on the phone choose disk drive mode.
then download the ROM you want to flash (stock roms are in the wiki). the file should be a .nbh file. rename it to BLACIMG.nbh if it isnt already and put it on the root (not in any folder) of your sd card. reboot your device and hold the volume down button. you should now be able to flash that ROM
problem solved...
...i think.
ASK768 said:
if activesync no longer works for you, connect the phone to the computer with a cable (as you would normally) then on the phone choose disk drive mode.
then download the ROM you want to flash (stock roms are in the wiki). the file should be a .nbh file. rename it to BLACIMG.nbh if it isnt already and put it on the root (not in any folder) of your sd card. reboot your device and hold the volume down button. you should now be able to flash that ROM
problem solved...
...i think.
Click to expand...
Click to collapse
thank u my friend sooooo much.. my problem settle. i folow u what u do.. i reboot and press buton volume and i link sync .. and done... thank so mouch.................................................
Solution found, thread closed
Related
Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.
Crackwhore wrote a guide for this, at top of forum
http://forum.xda-developers.com/showthread.php?t=505377
I used Crackwhore's guide too for my Orange HD and it worked perfectly with HSPLWrapper_Blackstone_156OliNex.zip allowing me to flash Duttys ROM which is excellent.
I even followed his instructions to roll back the SPL to test incase I ever needed to get the phone fixed under warranty, and it worked.
Flashing Orange Touch HD
bilalperwaiz said:
Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.
Click to expand...
Click to collapse
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING
Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for
digo21 said:
Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for
Click to expand...
Click to collapse
spl is similar to the bios of ur pc...
hispeedworm said:
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING
Click to expand...
Click to collapse
well regarding updating spl from 1.14 to 1.54 u need not install the full rom..
jus install hspl 1.56 olinex or if u want stock 1.54 then
1. dnload stock spl 1.56 from the tut thread
2. run uspl 2.5
3. wait fr bootloader to show 1.xx.uspl
4. remove and replg usb cable and confirm usb on white part
5. run hsplwrapper 1.56 olinex but do not do any thing on the ruu(wait fr files to extract in the window from where u ran the hspl wrapper)
6.copy the stock spl u dnloaded(ruu_signed.nbh) into the directory where files were extracted and allow to overwrite.
n thats all u need to get 1.56 stock..
yup u dont need stock rom if u just wanna get a cooked rom but if u want official update. thats the rom for orange sets.n do try both normal update n cooked rom of ur choice =)
Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you
bilalperwaiz said:
Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you
Click to expand...
Click to collapse
well this is a active forum..
n ya get back if need arises.
ur most welcome man
Thanks a lot......brilliant tutorial to debrand a orange touch HD to official ROM......
Hi! I have a question about roms. I want to flash my rom with let"s say shadowmans win 6.5, but i dont know how, because everyone is talking about hardspl and branded phones. I have i stock rom now (6.1) and i have hardspl preinstalled, does that mean that i can flash any rom i want or what? What is the quickest way to flash and what can u do if flashing fails? I need a quick giude for dummies. Thanks for all your help!
the easiest way to flash is with custom RUU it is explaind in hspl Wiki- as you will use this to flash hspl
download newest hspl 1.83 olinex and flash it
http://forum.xda-developers.com/showthread.php?t=520312
download ROM
connect you topaz to pc in active syns mode
open CustomRUU it us usually included with downloaded ROM
follow the instructions
then you can flash the radio again use the wiki
http://wiki.xda-developers.com/index.php?pagename=Topaz_Radio_ROM
hope this can get you started
If you definitely have hspl 1.83 olinex installed (you can check from the 3 colour bootloader screen - completely switch off your topaz and switch on again whilst holding volume down key), then you can flash any ROM using just your microsd card instead of connecting to your PC.
Download the ROM of your choice and extract the .nbh file from the archive or folder. It will be the biggest file in the archive. Rename this to TOPAIMG.nbh and put it in the root (top level) of your microSD card.
Make sure your battery is near to full, then turn off and restart your Topaz in bootloader mode as described above. It will detect the ROM and ask you to confirm upgrade. Simple as that. When it's complete and says "success" you can restart your phone using the reset button.
If ever it fails, you can simply do it again. Or, take out your microSD, put it in a card reader and put another TOPAIMG ROM file there, re-insert, and reflash.
Don't forget to delete the TOPAIMG file afterwards.
You can flash complete ROMs this way or just radio ROMs, it's the same process. I like this method because it's self-contained and doesn't rely on connection to your PC. Only make sure a) olinex 1.83 is installed already, and b) there's adequate battery left.
Don't forget to make a note of your stock ROM so that you can download it again in case you ever want to go back to it, or if you send your phone in for service.
problem
I did what you said but when I turn on the power with volume down press i can read, for a very short while, the word "no file image". What I have to do now? In the micro SD there is only the .nbh file and in the boot mode I can read that olinex 1.83 is installed.Help please.thanks a lot. Simon
I have checked that too, but i have hspl 1.33, does that mean i can flash any rom i want from my sd card or i must have 1.83 to do that?
Thanks for help
tommaazz said:
I have checked that too, but i have hspl 1.33, does that mean i can flash any rom i want from my sd card or i must have 1.83 to do that?
Thanks for help
Click to expand...
Click to collapse
you want the latest hard spl 1.83 so that there wont be any problems. all the chefs state in there rom thread to have that one too.
fs1978 said:
I did what you said but when I turn on the power with volume down press i can read, for a very short while, the word "no file image". What I have to do now? In the micro SD there is only the .nbh file and in the boot mode I can read that olinex 1.83 is installed.Help please.thanks a lot. Simon
Click to expand...
Click to collapse
is your micro sd formatted with fat 32? must be formatted in order to flash a rom using a micro sd card first. you dont have to power down your device to flash from sd card either. just hold volume down and insert stylus in the soft reset hole. hold until bootloader screen comes up. after flashing a hard reset is recommended. thats when you power down the device. you have to wait till everything gets set up first though to get to where you can power down the device though. hold volume up and down button. while holding those buttons turn the power back on. then follow the instructions it says.
fs1978 said:
I did what you said but when I turn on the power with volume down press i can read, for a very short while, the word "no file image". What I have to do now? In the micro SD there is only the .nbh file and in the boot mode I can read that olinex 1.83 is installed.Help please.thanks a lot. Simon
Click to expand...
Click to collapse
Is your ROM file named exactly TOPAIMG.nbh? Note the caps for the filename and lower case for the extension.
I was just reading another thread and apparently this is important for the bootloader to recognise it.
Please add one small comment to HSPL instructions
Few of us get "stuck" installing HSPL... Once you see a tricolor screen you are to follow RUU...but it says to be connected in activesync. yet if one looks on activesync you see your device is disconnected.
Please add "wait a minute" and just click OK on RUU. By then it is connected just doesn't show in activesync. Flash and all should be good.
Andy
I haven't burned a new ROM yet but have been getting the pieces together
I have an AT&T Pure which comes stock with WinMo 6.5 and also comes with
a Stock HSPL 1.83 (I believe 1.83 is required for all 6.5 and above?)
I think there is a potential area of confusion here for Pure users
(Especially since the other Topaz came with WinMo 6.1 and HSPL 1.33)
there is an OEM HSPL 1.83 and an Olinex modified 1.83 that will unlock
the phone.
Correct me if I'm wrong but
The one that is actually needed is the "modified"
1.83 OliNex (available here on XDA from Olinex as a sticky)
Can someone confirm this "subtle" difference???
I've gone to the tri-color Boot screen and the stock Pure only says
HSPL 1.83 (it does does not say OliNex)
my current understanding is that I will need to
burn the Olinex HSPL over my Stock OEM 1.83
before adding a new ROM??
One final question is after I reburn the new Olinex HSPL
Do I need to install the new ROM at that point?
Or could I use my phone? (with old stock Rom plus new HSPL)
Just want know if I'd be "off the air" at that point or not?
(So maybe I'll wait with R1+ over the latest Dutty Rom)
TIA
Hope this can at least promote some understanding
KJL
problem
--------------------------------------------------------------------------------
I did what you said but when I turn on the power with volume down press i can read, for a very short while, the word "no file image". What I have to do now? In the micro SD there is only the .nbh file and in the boot mode I can read that olinex 1.83 is installed.Help please.thanks a lot. Simon
any idea on how to flash back to stock at&t rom for warranty purposes. i rmr seeing a post in the raphael rom section but nothing here. any ideas??? im turning this in for a tilt 2. sits perfectly in my car mount n looks like a micro mini netbook...haha....
any other way to flash the rom beside used the sd card , because when i when to boot load tri color screen it say no image file , so any one please help .
Did you hard SPL it, and are you sure you renamed the file correctly?
yes i did and try find a way used pc to flash it , anyone know
hey, sorry i aint an expert but have you flashed the rom to the root of the memory card, turned the phone off, taking the battery out for 3-5 seconds, re-installing the battery then holding down the volume down button and at the same time th epower button, this should then display the bootloader mode, then everything is basically automatic, and just follow the on screen instructions, down forget to hard reset after installation!
yongh said:
yes i did and try find a way used pc to flash it , anyone know
Click to expand...
Click to collapse
The ROMS ive installed recently tend to come bundled with RomUpdateUtility.exe which allows you to install the rom from your desktop via usb link.
Here's the ROM library:
http://forum.xda-developers.com/showthread.php?t=477801
Scroll down to:
II - FLASHING TOOLS & UTILITIES
Choose:
- ROM Update Utility (RUU) for X1 with instructions - App to flash ROMs from PC
Follow instructions:
DONE!
Hi folks!
I hope that you can help me:
I have to restore the stock spl on my xperia in order to get the keyboard and a case crack repaired!
The initial situation was like this: X1 hard spled with custom fw.
I first downloaded a german vodafone rom and flashed this rom with the sd card method: Renamed the firmware to kovsimg.nbh, copied it to sd and flashed via hardspl. I rebooted the phone and the standard tom booted just fine.
Then I downloaded "ruusigned_072stockspl.zip" from this thread: http://forum.xda-developers.com/showthread.php?t=431218
I extracted it, renamed it to kovsimg.nbh and flashed it... after the flashing process (the bar was full which means it flashed 100% to me) the phone showed "loading" for a while... after like 10mins I put out the battery.
The phone now starts into tricolour screen even if I dont press power+down.
its on stock SPL (shows SPL-0.72.0000) and it says "Continue to Upgreade ROM... please wait" but nothing happens..
what steps should I take from there on? I ve attached a screen which shows the tri colour screen.
Did I brick my X1?
Don't think you got much more options then try to reflash the spl. Maybe that will fix this. Do you still got usb access in this tri color mode?
nope, I dont get a usb connection
With spl you mean I should try to reflash hardspl?
If I have no hard spl, is it possible to flash a original rom with a sd card only?
HellSassa69 said:
nope, I dont get a usb connection
With spl you mean I should try to reflash hardspl?
If I have no hard spl, is it possible to flash a original rom with a sd card only?
Click to expand...
Click to collapse
pls compare your problem with this post and see if the solution (under Edit) also applies for you
gl
DrakenKorin said:
pls compare your problem with this post and see if the solution (under Edit) also applies for you
gl
Click to expand...
Click to collapse
thx for your advice I am sure that this will be the solution - stupid thing is: like the guy in the post you linked I have lost my micro sd to SD Adapter and therefore I cant write the stock firmware to my card -.- stupid thing...
In a hour I ll rush away, buy a adapter and then try to flash the stock rom but as it sounds from the thread the scenario is the same so I think it will work.
EDIT: This was the solution I downloaded the stock rom from the sticky thread in the Rom Section from XDA, extracted it to the sd root and renamed it kovsimg.nbh. Put sd card into X1, started X1 which automatically booted into tri colour screen - I only had to press power to porcede and everything is finde now after the flashing process! Stock rom and stock spl on my X1 thanx
simple!
i had the same problem...just rename the original rom.image to RUU_Signed.nbh then open hardspl (dnt push next)and replace the file push next ,update and it;s done!don't worry if u see the error at 0 % try to open the x1 after that and it would be fine
i thought of re doing doloop's modd for TP2
and here it is fully tested to be working
now we can mtty our X1 without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- run then ROMUpdateUtility.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
http://valkyrie.htc-files.com/downloads/roms/valkyrie/XPERIA/task29.zip
WHATS TASK29\MTTY
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
read this post to know what made me such a firm fan of mtty.http://forum.xda-developers.com/show...postcount=6085
but the thing is, mtty is and can be hard to use for new users. ... for me,, i was having the worst time installin the drivers needed to run mtty on win7 x64. so u i made this tool for me and for all
CREDIT:
all credit goes to doloop for coming up with the idea
doloop said:
Hi,
I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
As every one understand this command format the rom,
Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.
After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1
hey cool.. friend of mine just told me bout it.. he did it on his HD2 ^^
I'll give it a shot a soon as u release ur new Rom ^^
Brilliant idea. Haven't tried it out yet but if it works, this is going to be revolutionary.
Thanks for even thinking of such a procedure.
this is wonderful news !!!!!!!!
thx agent, should be sticky!
This is a fantastic application, as using MTTY with 64bit windows 7 takes a bit of mucking around.
Thanks agent)_47
this task29 messed up my phone now i can get past the se logo on the vakyrie 23540 rom....i did exactly what u sayd agent and then flashed ur rom and i
cant get passd se logo so now ill try to flash stock rom and then back to yours
Thanks Agent, just one question. Can it be use for HD2 and HD?
Cheers.
mobilkungen78 said:
this task29 messed up my phone now i can get past the se logo on the vakyrie 23540 rom....i did exactly what u sayd agent and then flashed ur rom and i
cant get passd se logo so now ill try to flash stock rom and then back to yours
Click to expand...
Click to collapse
did u flas a rom afterwards? if yes u need to use a different customruu, not this one....this one is only for mtty use
jimk68 said:
Thanks Agent, just one question. Can it be use for HD2 and HD?
Cheers.
Click to expand...
Click to collapse
no
but we hav the same app in the hd2 dev section
agent_47 said:
did u flas a rom afterwards? if yes u need to use a different customruu, not this one....this one is only for mtty use
Click to expand...
Click to collapse
i know its fo the mtty use i flashe thrue sd card..and ur rom and it started to softreset by itself and would not get passed sony logo on boot
so now i have stock rom and i works perfecly
mobilkungen78 said:
i know its fo the mtty use i flashe thrue sd card..and ur rom and it started to softreset by itself and would not get passed sony logo on boot
so now i have stock rom and i works perfecly
Click to expand...
Click to collapse
wat?? n comfused...
just to make surre...this is what you do.
1. flash the task29 folder (not from sd card...via active sync)
2.when done, flash any ROM using a different customRUU or via sd card
sori i was to ask task29 just format n clean rom?what about radio?
Good one Agent, mtty Win 7 x64 had too many loops for me to jump through.
Thank you agent, i had tried and it worked.
agent_47 said:
wat?? n comfused...
just to make surre...this is what you do.
1. flash the task29 folder (not from sd card...via active sync)
2.when done, flash any ROM using a different customRUU or via sd card
Click to expand...
Click to collapse
i flashed stock rom after the task29 and then ur rom and now its fine
great work agent! thanks
worked for me. thanks very much
1. run ROMUpdateUtility in task 29 folder when in boot screen
2. and then install any custom rom
a question. after installing the new rom is necessary to make HR?
chemita said:
a question. after installing the new rom is necessary to make HR?
Click to expand...
Click to collapse
in theory, no
but i don see a problem HRing nonetheless as it only takes 5sec to do it
I mean after installing your rom for example. not the task29