How to upgrade from Orange ROM ?? - Touch HD Windows Mobile ROM Development

Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.

Crackwhore wrote a guide for this, at top of forum
http://forum.xda-developers.com/showthread.php?t=505377

I used Crackwhore's guide too for my Orange HD and it worked perfectly with HSPLWrapper_Blackstone_156OliNex.zip allowing me to flash Duttys ROM which is excellent.
I even followed his instructions to roll back the SPL to test incase I ever needed to get the phone fixed under warranty, and it worked.

Flashing Orange Touch HD
bilalperwaiz said:
Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.
Click to expand...
Click to collapse
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING

Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for

digo21 said:
Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for
Click to expand...
Click to collapse
spl is similar to the bios of ur pc...

hispeedworm said:
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING
Click to expand...
Click to collapse
well regarding updating spl from 1.14 to 1.54 u need not install the full rom..
jus install hspl 1.56 olinex or if u want stock 1.54 then
1. dnload stock spl 1.56 from the tut thread
2. run uspl 2.5
3. wait fr bootloader to show 1.xx.uspl
4. remove and replg usb cable and confirm usb on white part
5. run hsplwrapper 1.56 olinex but do not do any thing on the ruu(wait fr files to extract in the window from where u ran the hspl wrapper)
6.copy the stock spl u dnloaded(ruu_signed.nbh) into the directory where files were extracted and allow to overwrite.
n thats all u need to get 1.56 stock..

yup u dont need stock rom if u just wanna get a cooked rom but if u want official update. thats the rom for orange sets.n do try both normal update n cooked rom of ur choice =)

Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you

bilalperwaiz said:
Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you
Click to expand...
Click to collapse
well this is a active forum..
n ya get back if need arises.

ur most welcome man

Thanks a lot......brilliant tutorial to debrand a orange touch HD to official ROM......

Related

Installing WM on BA

I did everything the site said, but I ran stuck when it asked me to use the upgrade MaUpgradeUt_noID, I run the upgrade then nothing happends when it sees for the device version. well then I click just on upgrade then it sais its finished then cold reset but theres no Stripe screen coming(for the boot) I also just pressed Camera and record buttons but nothing helped.. someone can help me?
hey dude!
dun worry
first u need to see the information dialog
which tells you the version of rom u have already and the version u r upgrading to.
So, as far as i judge is that, u have to have an nk.nbf, ruu.dll, ruu.conf, getdevicedata.exe, enterBL.exe and finally Maupgradeut_noid.exe
put ur device in bootloader prior to run the upgrade process.
press ur record + on/off then press reset (keep pressing three buttons for 2 seconds) U will see SERIAL written at top on ur BA's screen. Connect the usb cable to your BA and disable usb connections in active sync. then run upgrade process
just run the upgrade. It will take 25 minuts
U need to put out the mem card too before putting to bootloader
(u need just one nbf file at a time)
dark_prince said:
hey dude!
dun worry
first u need to see the information dialog
which tells you the version of rom u have already and the version u r upgrading to.
So, as far as i judge is that, u have to have an nk.nbf, ruu.dll, ruu.conf, getdevicedata.exe, enterBL.exe and finally Maupgradeut_noid.exe
put ur device in bootloader prior to run the upgrade process.
press ur record + on/off then press reset (keep pressing three buttons for 2 seconds) U will see SERIAL written at top on ur BA's screen. Connect the usb cable to your BA and disable usb connections in active sync. then run upgrade process
just run the upgrade. It will take 25 minuts
U need to put out the mem card too before putting to bootloader
(u need just one nbf file at a time)
Click to expand...
Click to collapse
I cant find those files, even on the internet to download, I cant find it can you upload it for me or something?

did i brick my blackstone??? PLEASE HELP!!!!

When i turn on my phone I get the Tri Colored screeen
and it says: Upgrade ROM error code please try again.
and then the phone turns off and on.... Please help....
please please HELP SOMEONE!!!!
Don't dispair! I had the same problem and got out of the situation: http://forum.xda-developers.com/showthread.php?t=505377&p=3677341
You probably have the wrong Original Rom from HTC installed (may wrong language).
To solve the situation you will need USPL. USPL will install. If you are using Windows Vista you will probably have to update the drivers (See the thread).
Once USPL is running install the Original HTC 1.56-ROM.
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
nobody else can help??????
Try to take out the battery for one minute or two, then see what happens when switching on.
If ok (usual start) make usual normal bootloader state, and see what is your SPL. Then decide which flash you have to do.
Mr. Nick said:
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
Click to expand...
Click to collapse
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
please help me!!!!!
dalamario said:
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
Click to expand...
Click to collapse
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
from my experience with HTC Wizard and what you are describing it
sounds like
your battery is very close to dead
you need to find a way to recharge it
your phone is protecting it by shutting off
also i don't know how valid this is for the Blackstone
but the wizard would not charge in tri-color mode
(again for battery sake)
so make sure you have a nicely charged battery (buy a spare or a table charger)
and then try to flash something again
P.S. i don't know how one sentence cries for help peppered with EXCLAMATION points encourage anyone to help you
nguyenbathanh said:
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
Click to expand...
Click to collapse
A clarification of the above post. When you have 3 colors (actually 4 with white color) and USB on the white band you have to start blac_uspl.exe. That will replace the original bootloader of your phone with cracked temporary bootloader named USPL. At this stage it shall no more give errors and you may flash it from the PC or from the memory card.
The suggestion for the battery also seems fair.
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
You have to copy the BLACIMG.nbh on the microSD using a USB card reader, not your phone. Then with the microSD on the phone, in the tri-color screen, it will automatically flash your ROM, if you don't have low battery of course.
If you want to use USPL to flash a coocked ROM (for your original official rom is not needed). Your phone have to stay at tri-color screen for more then 10s.
Perhaps your problem is a low battery as someone already suggested.
Do you have tried to remove battery and put it back, let the phone off and charge it with the wall charger?
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
wow
Mr. Nick said:
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
Click to expand...
Click to collapse
LoL
Dont stress so much next time. When your stressed out you dont think with a clear head. Glad it worked out for you.
The changing of ROM only seems can not brick your phone. Only unsuccessful changing of SPL can. Until SPL is OK you may ever flash new ROM.

plz help td2 stopped working after flashing atempt

tried to flash my TD2 to |T|6.5.1|ROM|WWE| ★ EnergyROM "Leo" 23081/21864 | Oct 28 | ★ Manila 2.5 ★ http://forum.xda-developers.com/showthread.php?t=562942
but after it was done it just stops at the touch diamond 2 logo i tried hard reset didnt work and i tried to flash with other ROMs but it just stays at 0 % dosnt go any further what can i do cant use it at all now.
i been running with custom ROMs before with no probs.
What spl version do u have?
Spl1.33.0000
you have made a mistake. you are not suppose to flash your phone without Hard spl. Do you know where your device is originally from? if you do go to the HTC website and download the stock rom.
step 2 download the rom that is for your phone.
step 3 put your device into tricolor mode (boot loader) if you dont know how then just hold the low volume botton and press power until your device enters the tri color mode.
step 4. once you are in the tricolor mode then plug in your data cable and wait until your computer recognizes it
step 5. run the original rom that you downloaded from htc.
now your device should be flashing the stock rom and after its done your device should be able to start.
your lucky that u didnt brick your phone.
if you have any other Q's let me know
I believe most of the newer roms require Hspl v1.83 to flash. Try that
danishnicooo said:
Spl1.33.0000
Click to expand...
Click to collapse
u need Hspl v1.83, then u'll be able to flash wm 6.5 rom; otherwise u'll get stuck at 18% everytime u try to flash it

any other way to flash the rom beside sd card

any other way to flash the rom beside used the sd card , because when i when to boot load tri color screen it say no image file , so any one please help .
Did you hard SPL it, and are you sure you renamed the file correctly?
yes i did and try find a way used pc to flash it , anyone know
hey, sorry i aint an expert but have you flashed the rom to the root of the memory card, turned the phone off, taking the battery out for 3-5 seconds, re-installing the battery then holding down the volume down button and at the same time th epower button, this should then display the bootloader mode, then everything is basically automatic, and just follow the on screen instructions, down forget to hard reset after installation!
yongh said:
yes i did and try find a way used pc to flash it , anyone know
Click to expand...
Click to collapse
The ROMS ive installed recently tend to come bundled with RomUpdateUtility.exe which allows you to install the rom from your desktop via usb link.
Here's the ROM library:
http://forum.xda-developers.com/showthread.php?t=477801
Scroll down to:
II - FLASHING TOOLS & UTILITIES
Choose:
- ROM Update Utility (RUU) for X1 with instructions - App to flash ROMs from PC
Follow instructions:
DONE!

[TOOL] Task 29 (format internal Memory) without drivers, without mtty.

i thought of re doing doloop's modd for TP2
and here it is fully tested to be working
now we can mtty our X1 without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- run then ROMUpdateUtility.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
http://valkyrie.htc-files.com/downloads/roms/valkyrie/XPERIA/task29.zip
WHATS TASK29\MTTY
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
read this post to know what made me such a firm fan of mtty.http://forum.xda-developers.com/show...postcount=6085
but the thing is, mtty is and can be hard to use for new users. ... for me,, i was having the worst time installin the drivers needed to run mtty on win7 x64. so u i made this tool for me and for all
CREDIT:
all credit goes to doloop for coming up with the idea
doloop said:
Hi,
I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
As every one understand this command format the rom,
Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.
After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1
hey cool.. friend of mine just told me bout it.. he did it on his HD2 ^^
I'll give it a shot a soon as u release ur new Rom ^^
Brilliant idea. Haven't tried it out yet but if it works, this is going to be revolutionary.
Thanks for even thinking of such a procedure.
this is wonderful news !!!!!!!!
thx agent, should be sticky!
This is a fantastic application, as using MTTY with 64bit windows 7 takes a bit of mucking around.
Thanks agent)_47
this task29 messed up my phone now i can get past the se logo on the vakyrie 23540 rom....i did exactly what u sayd agent and then flashed ur rom and i
cant get passd se logo so now ill try to flash stock rom and then back to yours
Thanks Agent, just one question. Can it be use for HD2 and HD?
Cheers.
mobilkungen78 said:
this task29 messed up my phone now i can get past the se logo on the vakyrie 23540 rom....i did exactly what u sayd agent and then flashed ur rom and i
cant get passd se logo so now ill try to flash stock rom and then back to yours
Click to expand...
Click to collapse
did u flas a rom afterwards? if yes u need to use a different customruu, not this one....this one is only for mtty use
jimk68 said:
Thanks Agent, just one question. Can it be use for HD2 and HD?
Cheers.
Click to expand...
Click to collapse
no
but we hav the same app in the hd2 dev section
agent_47 said:
did u flas a rom afterwards? if yes u need to use a different customruu, not this one....this one is only for mtty use
Click to expand...
Click to collapse
i know its fo the mtty use i flashe thrue sd card..and ur rom and it started to softreset by itself and would not get passed sony logo on boot
so now i have stock rom and i works perfecly
mobilkungen78 said:
i know its fo the mtty use i flashe thrue sd card..and ur rom and it started to softreset by itself and would not get passed sony logo on boot
so now i have stock rom and i works perfecly
Click to expand...
Click to collapse
wat?? n comfused...
just to make surre...this is what you do.
1. flash the task29 folder (not from sd card...via active sync)
2.when done, flash any ROM using a different customRUU or via sd card
sori i was to ask task29 just format n clean rom?what about radio?
Good one Agent, mtty Win 7 x64 had too many loops for me to jump through.
Thank you agent, i had tried and it worked.
agent_47 said:
wat?? n comfused...
just to make surre...this is what you do.
1. flash the task29 folder (not from sd card...via active sync)
2.when done, flash any ROM using a different customRUU or via sd card
Click to expand...
Click to collapse
i flashed stock rom after the task29 and then ur rom and now its fine
great work agent! thanks
worked for me. thanks very much
1. run ROMUpdateUtility in task 29 folder when in boot screen
2. and then install any custom rom
a question. after installing the new rom is necessary to make HR?
chemita said:
a question. after installing the new rom is necessary to make HR?
Click to expand...
Click to collapse
in theory, no
but i don see a problem HRing nonetheless as it only takes 5sec to do it
I mean after installing your rom for example. not the task29

Categories

Resources