Database Develop

HELP My P4350 is not responding!!:eek:

Can anyone help me, while updating my rom there went something wrong, i guess!
Now I only see the screen with 'Touch-IT' and I don't know what to do! Please help me!!
Thanks a lot! Bram

this guide really helped me when i started flashing
bramwillems said:
Can anyone help me, while updating my rom there went something wrong, i guess!
Now I only see the screen with 'Touch-IT' and I don't know what to do! Please help me!!
Thanks a lot! Bram
Click to expand...
Click to collapse
PAY SPECIAL ATTENTION TO STEPS 3. 3A,3B,3C...
1. Download which version of Touch IT you want. For the Last version made, here is the link: http://forum.xda-developers.com/showthread.php?t=340403
2. Backup any information you wouldn't want to lose. Either backup to memory card or PC; your choice
3. At this point, You need to install the official RUU for your device, if you're already running the official RUU, then you need to hard reset your device. (Press and hold both soft keys and press reset button, continue to hold softkeys til screen displays to hard reset. Press the call button to continue). If you need to install the official RUU, continue to step 3a4Here is a list of uploaded RUUs
3a. Enter bootloader on your phone (Hold camera button and press reset, continue holding camera until a screen with 3 gradient colors shows up
3b. Connect your computer via USB to your ppc (Pocket PC)
3c. Run the RUU .exe from your hard drive, follow its simple onscreen instructions and click check boxes necessary to continue with the installation. This should take a few minutes, and you will more then likely see your screen flash and change things, this is normal, let it work. After a few minutes it will boot up and go into "automatic customization of your device", I continued this (screen alignment, tips, auto setup), and waited for my device to be totally ready for me to use.
4. Connect your device via USB to the PC and wait for activesync. If it automatically pulls up a profile for your phones sync, delete that profile. If it asks again to setup device for syncing items, click cancel. You will still be able to explore your phone and install devices without setting up the sync profile for your phone.
5. Make sure your phone is connected as a guest, if it is not, make sure it is. The method I used to do this was this zip file I ran "guest only" registration entry. (Make sure and run allow partnership registration after completing installation), but it should display as guest after the hard reset.
6. Copy aserg policies.cab to your mobile device
7. Run aserg policies.cab from your device
8. Soft reset (use stylus for button on side of wing, or on bottom of herald)
9. Go into your comm manager on your phone, and disable "phone". Basically enter flight mode so nothing can be sent to your phone during this process.
10. Once booted, its time to give it a shot. Make sure you're still connected as guest, and run !Upgrade_rom.bat from Touch_it folder on your PC
11. This will bring up a command prompt waiting for you to hit a key to begin, press any key
12. During this time it is installing, NEVER touch your phone or play with it in any matter. It may look as though the command prompt has gotten hung up at times, but leave it run until it completes (or fails). your phone will pop up a message saying "unknown status" or the likes, but dont close that window, like I said just leave it alone.
13. If you have no error messages in the command dialogue box then you're ready to hard reset your phone. (press both softkeys, and press reset, continue holding softkeys til you see a dialogue asking if its okay to restore settings, hit the call button to finish it)
14. Your device SHOULD boot normally, go through setup, and you should be golden.
If at any time there is an error during install, but you still let it complete, you might have a chance at it working. Hard reset it after completion (even with errors) just to see if it works. If it wont go past your Tmobile or HTC picture screen on bootup, then you have bricked your device. To UNbrick it, run steps 3a through 3c and reinstall the RUU.
If you get any errors, try and try again. Its proven working on several devices.

thank you very much for your help, but i cant find the offical RUU?

bramwillems said:
thank you very much for your help, but i cant find the offical RUU?
Click to expand...
Click to collapse
You defenitifly flashed a rom from teh HARD-SPL RUU folder...
... or you left a SPL.nbh inside your RUU folder.....
All roms are found in my signiture "All roms"
And for better flashing... download latest TouchIT6.1.3 and replace the RUUsigned.nbh with a one you will flash.
Or flash the TouchIT 6.1.3
I know hardspl sorked for you.
If flashing isn´t working
PUT device in BOOTLOADER (cam + softreset) then it MUST work
Good luck

papamopps said:
You defenitifly flashed a rom from teh HARD-SPL RUU folder...
... or you left a SPL.nbh inside your RUU folder.....
All roms are found in my signiture "All roms"
And for better flashing... download latest TouchIT6.1.3 and replace the RUUsigned.nbh with a one you will flash.
Or flash the TouchIT 6.1.3
I know hardspl sorked for you.
If flashing isn´t working
PUT device in BOOTLOADER (cam + softreset) then it MUST work
Good luck
Click to expand...
Click to collapse
Thank you papamopps! I run the HARD-spl again and my phone is fully functional!
I was very afraid that I my phone was totaly crashed and I could thrown it away! Thank you for saving my dear phone

bramwillems said:
Thank you papamopps! I run the HARD-spl again and my phone is fully functional!
I was very afraid that I my phone was totaly crashed and I could thrown it away! Thank you for saving my dear phone
Click to expand...
Click to collapse
Since NOW - never use HArd-SPL again...
Take the RUU from TouchIT6.1.3 or any other official RUU WITHOUT SPL.nbh!!
and enjoy free flashing .....

papamopps said:
Since NOW - never use HArd-SPL again...
Take the RUU from TouchIT6.1.3 or any other official RUU WITHOUT SPL.nbh!!
and enjoy free flashing .....
Click to expand...
Click to collapse
But on the releases from Itje there is a note that is won't work without HARD-spl? So what is the difference? (I don't know if I ask stupid questions, forgive me)

If you have used hard-spl once on your phone, you dont need to do it again
I include in my rom releases what u need to flash
just run the rom.exe file, and the phone will update.

Please help my Dopod D810/Trinity100 stuck at bootloader at 75% upgrading

my device stuck at 75% when upgrading,now screen blank LCD,try to reboot at bootloader again,but I can't boot till 1%,then automatic prot out error,before that already try SSPL-Trin to boot a lot of version of win 6.1 rom but now stuck at 75%,if can stat window,I can handle it,try sync with device and open SSPL - Trin but system not support,(normaly down load SSPL- TRIN in device,go in to bootloader)please some one EXPERT out there can help me,Thanks
Eddie (Malaysia)
email address : [email protected]

1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck

sa13o said:
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
Click to expand...
Click to collapse
Try to boot from mini sd card,don't know which step make wrong,
1.Format to 32FAT
2.copy file .NBH to card,changed name to TRINIMG.nbh
3.put in to card slot
4.start bootloader
5.screen show loading......then at top have 0008xxx serial number??????
why can't get screen shown same like photo attach,so can't continue for next step to press start botton,coz turn back to bootloader screen.please that I make it wrong?please need ur all help

Share with ppl out there,Bootloader stuck at 75% whe upgrading Rom
sa13o said:
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
Click to expand...
Click to collapse
Early,thank fou ur reply,my divice can turn on again.ha......ha....,I used Prof format,Extract the file http://rapidshare.com/files/46816571...1_108_Ship.exe (Official Rom Version :3.00.707.18,Radio version1.46.30.11)Aus Rom,then look for RUU_ sign.NBH,and rename to TRINIMG.nbh,copy file to Minisd card already format to FAT 32,And without Lable.soft reset divice at HTC home screen,and press and hold power botton and camera botton,with soft reset,after bootloader prot out,continue with white screen"Loading"and Checking,if match it will came out with same screen that Prof show at previouse post,then press power botton to boot,please plug in charger when botting step by step will show on boot screen(show radio -ok,OS-ok,and etc......wiat for completed.Now my device ok,I fill happy
just want to thank sa13o and to share with you all,when u get in problem,please make it easy and find out the way out,keep trying sure you can get the anwser at the end.

Hi
Can you give the correct rapidshare download link for the official ROM, i have Dopod D810 currently flashed with HTC P3600i official ROM, cannot download the HTC P3600i ROM from HTC site because of the serial number checker.

How to upgrade from Orange ROM ??

Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.

Crackwhore wrote a guide for this, at top of forum
http://forum.xda-developers.com/showthread.php?t=505377

I used Crackwhore's guide too for my Orange HD and it worked perfectly with HSPLWrapper_Blackstone_156OliNex.zip allowing me to flash Duttys ROM which is excellent.
I even followed his instructions to roll back the SPL to test incase I ever needed to get the phone fixed under warranty, and it worked.

Flashing Orange Touch HD
bilalperwaiz said:
Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.
Click to expand...
Click to collapse
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING

Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for

digo21 said:
Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for
Click to expand...
Click to collapse
spl is similar to the bios of ur pc...

hispeedworm said:
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING
Click to expand...
Click to collapse
well regarding updating spl from 1.14 to 1.54 u need not install the full rom..
jus install hspl 1.56 olinex or if u want stock 1.54 then
1. dnload stock spl 1.56 from the tut thread
2. run uspl 2.5
3. wait fr bootloader to show 1.xx.uspl
4. remove and replg usb cable and confirm usb on white part
5. run hsplwrapper 1.56 olinex but do not do any thing on the ruu(wait fr files to extract in the window from where u ran the hspl wrapper)
6.copy the stock spl u dnloaded(ruu_signed.nbh) into the directory where files were extracted and allow to overwrite.
n thats all u need to get 1.56 stock..

yup u dont need stock rom if u just wanna get a cooked rom but if u want official update. thats the rom for orange sets.n do try both normal update n cooked rom of ur choice =)

Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you

bilalperwaiz said:
Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you
Click to expand...
Click to collapse
well this is a active forum..
n ya get back if need arises.

ur most welcome man

Thanks a lot......brilliant tutorial to debrand a orange touch HD to official ROM......

Stuck Wizard

Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!

sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
u prob. d/c ur cable when you were flashing a rom
this happened to me
the solution for me was to just reflash a rom

Hello,
sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!

eXPLOiTeD said:
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!
Click to expand...
Click to collapse
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)

Hello, Maybe this helps....
sephiroth_vg said:
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)
Click to expand...
Click to collapse
ok... if it`s shown in device manager the the phone is detected by the PC that`s in bootloader mode and connected....
If your phone is CID locked... i have to flash to a official IMATE K-JAM ROM.... you can` find some here... http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
And when you try to charge the phone... orange light must apear, if you say that it don`t indicate... then i think it doesn`t charge...
Regards & Good Luck!

man sadly no orange light.....the screen just turns white when i plug it in...sometimes even that doesnt happen...but a VERY RARE (2 times) the red light flashed for just a fraction of a second...and the links for imate roms are dead..i tried access to the ftp site and there is nothing left in the imate folder at all...anyways..i tried to flash the rom from imate website...even that wouldnt flash..says phone not detected..

blacdiag.nbh Error after flashing

I flashed blacdiag.nbh and after flashing i get this error :
Get OEMSPL fail!
Verify Str not found
Pls chk SECU-Flag on/off
Press HOME to exit
What does it mean ?
I ask because after last days flashing new roms i get problems my device sometime freezes and after rebooting (sometimes reboot freezes) starts reinstalling and that have didnot before
after presing HOME button i get to the
BlackStone System DIAG 5.02C
=====================
. Function Test
. Run-In Test
. Format FAT
. Device Info
. Engineer ID

could there be something wrong with my internal storage ?
and after running . Run-In Test it freezes on Pls Insert AC ? ? ?

hi
name ur file blacdiag.nbh to BLACIMG.NBH then try

fkameanq said:
name ur file blacdiag.nbh to BLACIMG.NBH then try
Click to expand...
Click to collapse
No mate, this one is for diagnostic not a rom flashing.
mrobo said:
could there be something wrong with my internal storage ?
and after running . Run-In Test it freezes on Pls Insert AC ? ? ?
Click to expand...
Click to collapse
did you plug in the AC? just connect your phone to the charger and wait for the tests to complete.

anaadoul said:
No mate, this one is for diagnostic not a rom flashing.
did you plug in the AC? just connect your phone to the charger and wait for the tests to complete.
Click to expand...
Click to collapse
what does mean AC ? is acumulate power ? the charger ? if yes then i have done so but nothing happend, and the phone was 100 fully charged
I wanted run the diagnostic because I got problems with my device as i described in previous post, the roms after normal restart-reset want install again it seems that didnot find correct boot for starting windows mobile, even some shortcuts like xdashutdown didnot worked get error could not find the program, I tried many roms with same problems that for it could not be it in the wrong rom
last I flashed oli's HSPL again an again newest Radio will see how long it wil work normally
could be virus in the phone ?
and other test which I done from blacdiag.nbh have passed only stopped at the AC and want know what does mean in the fist post
Get OEMSPL fail! Verify Str not found Pls chk SECU-Flag on/off ??? how to turn off the Secu Flag

I get this error :
The file 'xdaShutdown' cannot be opened. Either it is not signed with trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.

and after connecting trough AS the structure of folders seems so :

i would guess you tried hard reset right?
did you flash a new rom before all this started to happen?
if so, try downloading and flashing again and if you still have the symptoms then flash a stock ROM then a custom one.

anaadoul said:
i would guess you tried hard reset right?
did you flash a new rom before all this started to happen?
if so, try downloading and flashing again and if you still have the symptoms then flash a stock ROM then a custom one.
Click to expand...
Click to collapse
hard reset I tried many times, even flashing with other roms
I think there is some problem with SIM unlocking there went something wrong
I would apprecciate someones help !

mrobo said:
I flashed blacdiag.nbh and after flashing i get this error :
Get OEMSPL fail!
Verify Str not found
Pls chk SECU-Flag on/off
Press HOME to exit
What does it mean ?
I ask because after last days flashing new roms i get problems my device sometime freezes and after rebooting (sometimes reboot freezes) starts reinstalling and that have didnot before
after presing HOME button i get to the
BlackStone System DIAG 5.02C
=====================
. Function Test
. Run-In Test
. Format FAT
. Device Info
. Engineer ID
Click to expand...
Click to collapse
Your radio ROM appears to be damaged. Normally blacdiag.nbh is not flashable, it runs from RAM, you shouldn't be able to flash it per say.
SIM unlock and security unlock if you did one could have been the cause of this...

stepw said:
Your radio ROM appears to be damaged. Normally blacdiag.nbh is not flashable, it runs from RAM, you shouldn't be able to flash it per say.
SIM unlock and security unlock if you did one could have been the cause of this...
Click to expand...
Click to collapse
With running blacdiag.nbh from RAM you mean running blacdiag.nbh from root of sd card reseting device and holding volume down button ?
How to repair it ? What you suggest ?

Hi mrobo,
Here you have the commands from blacdiag, read the last line :
[How To] BLACDIAG.nbh
I just figured out how to use blacdiag.nbh:
Step 1: Flashing HardSPL from OliNex
Step 2: Press [Volume Down] and [Power] key to enter bootloader
Step 3: Using RUU tool download to phone. It will run blacdiag.nbh automatically.
Step 4: Follow the phone screen instruction by pressing [Home] key to enter diagnostic screen:
"BlackStone System DIAG 5.02C"
"======================="
". Function Test"
". Run-In Test"
". Format FAT"
". Device Info"
". Engineer ID"
Step 5: Use [Volume Down] or [Volume Up] key to select test options and press [Home] key to start diagnostic function.
RADIO commands in 'at-commands.txt'.
[WARNING] Above operations may damage your phone.
Maybe this is the remedi for your device "http://forum.xda-developers.com/showthread.php?t=511708"

problem SOLVED for now I think
I have again runed BLACKSTONEv1Unlock.exe and imei.unl and it seems that my problems gone for now
BAAAD THING THIS NOT HELPED MEEE !!!

NOW I FLASHED SHIPPED ROM AND GOING TROUGH THE ALL PROCEDURES AGAIN
WILL SEE LATER !