my device stuck at 75% when upgrading,now screen blank LCD,try to reboot at bootloader again,but I can't boot till 1%,then automatic prot out error,before that already try SSPL-Trin to boot a lot of version of win 6.1 rom but now stuck at 75%,if can stat window,I can handle it,try sync with device and open SSPL - Trin but system not support,(normaly down load SSPL- TRIN in device,go in to bootloader)please some one EXPERT out there can help me,Thanks
Eddie (Malaysia)
email address : [email protected]
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
sa13o said:
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
Click to expand...
Click to collapse
Try to boot from mini sd card,don't know which step make wrong,
1.Format to 32FAT
2.copy file .NBH to card,changed name to TRINIMG.nbh
3.put in to card slot
4.start bootloader
5.screen show loading......then at top have 0008xxx serial number??????
why can't get screen shown same like photo attach,so can't continue for next step to press start botton,coz turn back to bootloader screen.please that I make it wrong?please need ur all help
Share with ppl out there,Bootloader stuck at 75% whe upgrading Rom
sa13o said:
1. Remove battery wait for a while and put it back
2. Charge battery to 70% minimum
3. Try again
4. Good luck
Click to expand...
Click to collapse
Early,thank fou ur reply,my divice can turn on again.ha......ha....,I used Prof format,Extract the file http://rapidshare.com/files/46816571...1_108_Ship.exe (Official Rom Version :3.00.707.18,Radio version1.46.30.11)Aus Rom,then look for RUU_ sign.NBH,and rename to TRINIMG.nbh,copy file to Minisd card already format to FAT 32,And without Lable.soft reset divice at HTC home screen,and press and hold power botton and camera botton,with soft reset,after bootloader prot out,continue with white screen"Loading"and Checking,if match it will came out with same screen that Prof show at previouse post,then press power botton to boot,please plug in charger when botting step by step will show on boot screen(show radio -ok,OS-ok,and etc......wiat for completed.Now my device ok,I fill happy
just want to thank sa13o and to share with you all,when u get in problem,please make it easy and find out the way out,keep trying sure you can get the anwser at the end.
Hi
Can you give the correct rapidshare download link for the official ROM, i have Dopod D810 currently flashed with HTC P3600i official ROM, cannot download the HTC P3600i ROM from HTC site because of the serial number checker.
Related
Hi,
i upgraded my charmer with the new uk t-mobile rom and my nproblem is that the battery does not charge,and i don't know how to do
have you some suggestions???
Waiting your answer,thanks a lot,Antonio
Hi did you get a answer
Hi I have the ssame problem, did anybody come up with any ideas ?
Cheers
TBW
Battery Problem
Hi, I have too this problem with wm6 rom have you some suggestions??? pleas
Hi...nobody can help us???
Try plugging in the charger and when its plugged in, hit soft reset button with your stylus. Wait for the system to boot and see if it charges.
vlodeck said:
Try plugging in the charger and when its plugged in, hit soft reset button with your stylus. Wait for the system to boot and see if it charges.
Click to expand...
Click to collapse
i have the same problem and doesn«t work for me
Then my guess is you flashed a ROM not intended for your device.
now how i can solve this?
Reflash a charmer rom? And if that doesn't work, try a prophet WM5 rom.
it says that i don't have enough battery, is lower than 50%
Use the NO_ID RUU version instead.
i already try a few roms and i can't flash the pda with none of them
You will need to reboot in BootLoader mode first (powerkey+camera+reset).
hello!
a downgrade my Charmer and now the battrery is 0%, when i connect to usb phone don't want to start, on charger it startet but battery dont want to charge. help pls ...
Hi,
I have solve this problem but I'm not sure how I've done this.
1. dowlnoad cab from this link http://forum.xda-developers.com/showthread.php?t=327988
2. I have use program Wizard Service Tool and clear everything what is possible including format.
3. reset
4. format after strart camera+record+soft reset
5. after reset bootloader mode, and first time my phone has connet in BLmode with USB.
6. Then I have run original T-mobile RUU and it's working
My battery has been on 0% in system as well but after downgrade battery states about 70%
have a same problem.
did anybody else solve this problem? anybody used SD flashing method?
i've solved problem partly - now battery charges, but i can't start it without power supply. so what have i done:
1) i've downloaded ShellTool_bugfixed.zip (you can easily find it google).
2) unpack it.
3) copy Cert_SPCS.cab and EnableRapi.cab to you WM and install
4) extract nk.nbf from original Charmer ROM into ShellTool folder
5) start ShellTool.
6) press Get ROM Info
7) press Extract OS
10) press Flash OS
11) press ОК
Followed all this steps, now i've got an original charmer os, but bootloader is still from previous crap ROM. so there is trouble with starting it up. If you phone doesn't start even when you charging it from power socket, so try to wet contacts on battery - it should work.
now i thinking how to re-flash bootloader, cuz it cannot enter into bootloader witout power supply from socket. It's no possible to flash it from PC, cuz it cannot enter a booloader plugged into USB port. It seem that there is not enough power impulse to startup.
I am trying to install a rom to my wing from over 3 days couldn't do it , I need to know where to put the files and how to set the files up , This maybe easy for you but not for average person like me , Please help.
reply
sorry i dont have a answer for you.but, i feel your pain i am going through this same stuff and i is pissing me off. i had my friend do everything but he is getting pissed off now because i keep calling him on ****. i need help too.
Well, we need to know what you are doing first!
What ROM are you flashing?
Do you have HardSPL already on? Or do you have no idea? haha
Thanks for your respond , I will like to install ROM HERALD WWE 6.1 BUILD 20764.1.4.3 (Blue clear) , I have no idea what is HardSL !! but i will learn if you give me a little direction .
tazzam72 said:
Thanks for your respond , I will like to install ROM HERALD WWE 6.1 BUILD 20764.1.4.3 (Blue clear) , I have no idea what is HardSL !! but i will learn if you give me a little direction .
Click to expand...
Click to collapse
How to Flash HardSPL
1) Find out your IPL
-- Do a Soft Reset (Push Button under volume w/Stylus)
-- While doing Reset, hold the Camera button, it should bring up the Bootloader menu and list your IPL (I think, it has been a while since I haven't been running HardSPL)
2) Verify your IPL is 4.xxx or Higher!
3) Boot your phone Again
4) BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox
5) Download HardSPL:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
6) Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
7) Soft Reset again
8) Run ROMUpdateUtility.exe
9) screen will become white - WAIT until it reboots itself (Should be like 10-15 min)
10) Phone will boot back to your main ROM
11) Soft Reset, Hold Camera button, check if SPL is 4.70.yang
Okay, now HardSPL is on
12) Download Your ROM
There are 2 ways of doing this now, either
1) Run ROMUpdateUtility.exe - When finished, go to Step 8.
-OR-
2) Put RUU_signed.nbh on your SD-Card and call it HERAIMG.nbh
3) Soft Reset, hold the Camera button
4) It will say: PRESS KEY TO INSTALL or something like that...
5) Press the volume button down or up
6) The ROM should begin to Extract/Install
7) When it finishes, do a Soft Reset
8) You should have your new ROM now!
Good Luck!
Original HardSPL Thread:
http://forum.xda-developers.com/showthread.php?t=358225
Thanks will try now
I followed the instructions, however when I turn on the phone holding down the camera button I get a white screen that states searching for SD Card (the white screen disappears quickly) then a new screen with RED, Green, Blue, White stripes with the IPL & SPL INFO, there is no option to press up to install the ROM. The ROM is in the Root of the Storage card named written as such in your walk through.
Tom in AZ said:
I followed the instructions, however when I turn on the phone holding down the camera button I get a white screen that states searching for SD Card (the white screen disappears quickly) then a new screen with RED, Green, Blue, White stripes with the IPL & SPL INFO, there is no option to press up to install the ROM. The ROM is in the Root of the Storage card named written as such in your walk through.
Click to expand...
Click to collapse
What size Card are you using?
I cannot get my 4GB or 8GB Card to flash... I have to use a 2GB card (I think it is SDHC Drivers not loading in BootLoader)
That is most likely your problem.
Try to get a hold of a smaller one (Maybe borrow one)
Fenopy said:
What size Card are you using?
I cannot get my 4GB or 8GB Card to flash... I have to use a 2GB card (I think it is SDHC Drivers not loading in BootLoader)
That is most likely your problem.
Try to get a hold of a smaller one (Maybe borrow one)
Click to expand...
Click to collapse
I had a 4gb in there, so that might be part of the problem, as time went on there was more going on it seemed. I finally got it to go back to that flash that came with the HardSPL software.
In order to do it, I started off by taking your advice. First I put in an older Lexar 2gb chip into the phone (Non-SDHC), then re-installed the three cabs that come with the hardSPL (installing them to the device, not the SD card). Then had to put the phone into the mode with the 4 different color bars (press and release the soft reset button while holding down the camera button till the bars showed), and finally I started the RUU from the PC since it still did not see or take the NBH file off of the root directory of the 2gb Micro SD.
I hope it does not get flippy like that again. The darn phone was deleting its own files as it was unhappy on the last build. Thanks for the tip on the SD swap. I'll be sure to keep that in my bag of tricks should it happen again.
Tom
where do i transfer the files to on the phone how do i install them
hankf said:
where do i transfer the files to on the phone how do i install them
Click to expand...
Click to collapse
HERAIMG.nbh go on the Root of the SD-Card.
All instructions are right in this thread:
http://forum.xda-developers.com/showpost.php?p=3321535&postcount=5
these files go to the root of the sd card: Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
Thanks for the help super n00b have been reading but still lost dont want to mess my phone up once I hard sl my phone can I still run my old rom or do I need to install a new rom right away
mmmm...
Damn Phone...
hankf said:
these files go to the root of the sd card: Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
Thanks for the help super n00b have been reading but still lost dont want to mess my phone up once I hard sl my phone can I still run my old rom or do I need to install a new rom right away
Click to expand...
Click to collapse
Those CABs can go anywhere. You need to put them somewhere (root of the SD works for simplicity)
So put the CABs on the root of the SD Card
Use File Explorer or Total Commander (Whichever you have on the phone) to navigate to your SD Card and run the 3 CAB files (Order does not matter) - Install them to the phone (Not the SD Card)
Then run the Installer from your PC as stated in the instructions.
*Note: Installing HardSPL will also install a New ROM (It is some old version of PDAViet I think)
As for installing your old ROM again, you would use a different method.
Similar to installing HardSPL, there is a PC-Based installer for the stock ROM, this ROM will revert you to T-Mobile default OS and back to SoftSPL.
I can upload this ROM later when I get home if you would like...
I think i got the CAB part understood.
When I do the HARDSPL I should have a ROM ready to install correct may I ask what you reccommend I have never used any of them so all new to me.
Could you please upload the stock rom to revert back to t-mobile, the installer and softSPL or what ever I need.
hankf said:
I think i got the CAB part understood.
When I do the HARDSPL I should have a ROM ready to install correct may I ask what you reccommend I have never used any of them so all new to me.
Could you please upload the stock rom to revert back to t-mobile, the installer and softSPL or what ever I need.
Click to expand...
Click to collapse
I would have the ROM you want ready, otherwise you would be stuck with the HardSPL ROM (Which you probably don't want to use)
I would suggest Just2Clean.
It is customizable & fast. (Can be found in the ROM Dev forum)
Stock ROM:
http://www.mediafire.com/?2nq9iu0a2nt
so with the stock rom I can go back to my t-mobile theme at any time or do I need to get rid of the HARDSLP first?
1 more question my phone is Windows Mobile 6 Pro so do I need to stick with wm6 rom or can I do like wm6.1
hankf said:
so with the stock rom I can go back to my t-mobile theme at any time or do I need to get rid of the HARDSLP first?
1 more question my phone is Windows Mobile 6 Pro so do I need to stick with wm6 rom or can I do like wm6.1
Click to expand...
Click to collapse
The Stock ROM installer puts SoftSPL back on the phone.
Windows Mobile 6.1 is just modified version of Windows Mobile 6.
It doesn't matter.
got the phone HARDSLP tried installing rom just2clean of the sd card having the same problems as in post #7 tried different size microchip 2gig with no luck so i installed touchFLO 2d and now my phone just keeps rebooting tried connect back to the pc but it sees no phone any ideas
hankf said:
got the phone HARDSLP tried installing rom just2clean of the sd card having the same problems as in post #7 tried different size microchip 2gig with no luck so i installed touchFLO 2d and now my phone just keeps rebooting tried connect back to the pc but it sees no phone any ideas
Click to expand...
Click to collapse
Try using Flash Center (http://rapidshare.com/files/202330180/Flash_Center.rar.html)
1) Put the phone in BootLoader (Make sure it says SPL 4.70.yang)
-- To get in BootLoader: Do a Soft Reset while holding down the Camera Button
2) Put the ROM in the 'RUU' folder (Name it anything [No spaces/special characters]) and try flashing using ROMUpdateUtility
If SPL is not 4.70.yang:
Try Re-Flashing HardSPL
If it won't stay connected long enough to flash (Gives an error upon flashing)
- When the Phone reboots itself, try holding the Camera button again, it sometimes will keep going
If you STILL can't get it going..
- Search desperately for a different SD Card (Make sure it is formatted in FAT32/FAT16)
When i turn on my phone I get the Tri Colored screeen
and it says: Upgrade ROM error code please try again.
and then the phone turns off and on.... Please help....
please please HELP SOMEONE!!!!
Don't dispair! I had the same problem and got out of the situation: http://forum.xda-developers.com/showthread.php?t=505377&p=3677341
You probably have the wrong Original Rom from HTC installed (may wrong language).
To solve the situation you will need USPL. USPL will install. If you are using Windows Vista you will probably have to update the drivers (See the thread).
Once USPL is running install the Original HTC 1.56-ROM.
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
nobody else can help??????
Try to take out the battery for one minute or two, then see what happens when switching on.
If ok (usual start) make usual normal bootloader state, and see what is your SPL. Then decide which flash you have to do.
Mr. Nick said:
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
Click to expand...
Click to collapse
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
please help me!!!!!
dalamario said:
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
Click to expand...
Click to collapse
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
from my experience with HTC Wizard and what you are describing it
sounds like
your battery is very close to dead
you need to find a way to recharge it
your phone is protecting it by shutting off
also i don't know how valid this is for the Blackstone
but the wizard would not charge in tri-color mode
(again for battery sake)
so make sure you have a nicely charged battery (buy a spare or a table charger)
and then try to flash something again
P.S. i don't know how one sentence cries for help peppered with EXCLAMATION points encourage anyone to help you
nguyenbathanh said:
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
Click to expand...
Click to collapse
A clarification of the above post. When you have 3 colors (actually 4 with white color) and USB on the white band you have to start blac_uspl.exe. That will replace the original bootloader of your phone with cracked temporary bootloader named USPL. At this stage it shall no more give errors and you may flash it from the PC or from the memory card.
The suggestion for the battery also seems fair.
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
You have to copy the BLACIMG.nbh on the microSD using a USB card reader, not your phone. Then with the microSD on the phone, in the tri-color screen, it will automatically flash your ROM, if you don't have low battery of course.
If you want to use USPL to flash a coocked ROM (for your original official rom is not needed). Your phone have to stay at tri-color screen for more then 10s.
Perhaps your problem is a low battery as someone already suggested.
Do you have tried to remove battery and put it back, let the phone off and charge it with the wall charger?
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
wow
Mr. Nick said:
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
Click to expand...
Click to collapse
LoL
Dont stress so much next time. When your stressed out you dont think with a clear head. Glad it worked out for you.
The changing of ROM only seems can not brick your phone. Only unsuccessful changing of SPL can. Until SPL is OK you may ever flash new ROM.
NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
LVjrod said:
NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
Click to expand...
Click to collapse
If your phone is CDMA (sprint/verizon) make sure you have a CDMA ROM (there arent very many available), if not try flashing the phone again from the rainbow screen (bootloader) you may want to download the ROM again too, some people have had bad downloads.
so i can redo it from rainbow screen
Yes Put your phone in boot loader ( rainbow screen) and reflash. Who is your cell carrier? If it is Verizon or sprint then get a CDMA rom, AT&T and T-Mobile get a GSM rom
its sprint
wen i tried it said that i dont have usb on, its not readin it
LVjrod said:
its sprint
wen i tried it said that i dont have usb on, its not readin it
Click to expand...
Click to collapse
When you put it in boot loader then plug in your USB cord does it go from serial to usb on your phones screen? It may take a min for it to change
it says to follow the instruction on the pc to sync or sumthing like that
and restarts
and again on that TP2 screen and not doin anything
ok step by step.
1. uplug phone from pc
2. Pull out bat and put it back in
3. hold volume down to get to boot loader
4. plug in USB cable ( it should read on the last 1/3 of the screen near the bottom USB
5. Grab a CDMA rom from HERE or HERE
6. FLash the rom you got from step 5
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
LVjrod said:
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
Click to expand...
Click to collapse
Its cool. IF you look at the last white part of the screen on the bottom you should see something that says SERIAL when no cord is plugged in or USB once it is plugged in
If you dont then we can try using the SD card method
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
yes it does say that
its on usb now
goin to try again
Why don't you take out your SD card and put it in your PC and drag and drop the verizon stock rom on the SD card...That would be just the nbh file...name it rhodimg.nbh then put the sd card back in and then put it into bootloader and flash it back that way?
Yea, just what zelendel instructed you to do....
this is the error
plz make sure its properly synced
plz retry after syncing
LVjrod said:
this is the error
plz make sure its properly synced
plz retry after syncing
Click to expand...
Click to collapse
Ok try the SD method I posted a few posts back
ok
will try it
thanks again
error 260
about usb cradle
but on the boot loader screen it says usb
LVjrod said:
error 260
about usb cradle
but on the boot loader screen it says usb
Click to expand...
Click to collapse
Ok maybe I wasnt too clear, when you flash from the sd card you cant have it plugged in
oh
sorry
redoing
ok its in process now
once it is done then wut
LVjrod said:
ok its in process now
once it is done then wut
Click to expand...
Click to collapse
Once it is done then follow the last step and use the stylus to hit the rest button after removing the sd card and it should boot up full. Where did you get the rom?
I have bricked my Hera100 when i flashed OS only
its has the following :
IPL 5.04.0001
SPL 5.04.0000
GSM 03.07.90
OS 1.8.0.0
IT HANGS AT STARTUP SHOWING ABOVE DETAILS ONLY . PLEASE ANY ONE HELP PLEASE. THANKS
Okay. First, think you're going to want to do is flash back to the original WING/HERALD ROM - Click this link:TMo_Wing_RUU_Update_4.26.531.4
Also make sure to take out your sd card in your expansion bay if you have one.
Second, put your device into the bootloader by soft resetting your device (pressing in your stylus in the little hole on the left side of your device - then hold the camera button - until you get to a red-blue-green-white screen) then run the TMo_Wing_RUU_Update_4.26.531.4.
Then install the 3 CABs in this order:
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
6. Soft reset the phone.
7. Download the HardSPL folder, extract it, and place it on the Desktop.
8. Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen on the device will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
9. Phone should boot back into Canon Yang ROM. This is the HardSPL ROM. So far so good.
10. Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
If this works you can show you're patronage by trying one of my ROMs.
Tribulattifather said:
Okay. First, think you're going to want to do is flash back to the original WING/HERALD ROM - Click this link:TMo_Wing_RUU_Update_4.26.531.4
Also make sure to take out your sd card in your expansion bay if you have one.
Second, put your device into the bootloader by soft resetting your device (pressing in your stylus in the little hole on the left side of your device - then hold the camera button - until you get to a red-blue-green-white screen) then run the TMo_Wing_RUU_Update_4.26.531.4.
Then install the 3 CABs in this order:
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
6. Soft reset the phone.
7. Download the HardSPL folder, extract it, and place it on the Desktop.
8. Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen on the device will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
9. Phone should boot back into Canon Yang ROM. This is the HardSPL ROM. So far so good.
10. Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
If this works you can show you're patronage by trying one of my ROMs on my TribU2U thread
Click to expand...
Click to collapse
Thanks let me try i will post results .
Tribulattifather said:
Okay. First, think you're going to want to do is flash back to the original WING/HERALD ROM - Click this link:TMo_Wing_RUU_Update_4.26.531.4
Also make sure to take out your sd card in your expansion bay if you have one.
Second, put your device into the bootloader by soft resetting your device (pressing in your stylus in the little hole on the left side of your device - then hold the camera button - until you get to a red-blue-green-white screen) then run the TMo_Wing_RUU_Update_4.26.531.4.
Then install the 3 CABs in this order:
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
6. Soft reset the phone.
7. Download the HardSPL folder, extract it, and place it on the Desktop.
8. Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen on the device will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
9. Phone should boot back into Canon Yang ROM. This is the HardSPL ROM. So far so good.
10. Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
If this works you can show you're patronage by trying one of my ROMs on my TribU2U thread
Click to expand...
Click to collapse
It shows me invalid vendor ID but am trying to change your ROM to suite this device but i dont know how to ue mtty to get its CID infor. how can i get its CID infor????
Go the the wingster dot com. click roms, click tmobile wing, click 6.0 click download, it will take you to the tmobile website.
Enter the number located back of phone under battery. Download the StockRom. make sure you emter your phone into boot loader and install the stock rom. You don't need to be Hard SPLed. Should work because it worked for me. After your phone works just HardSPL your phone so you don't Brick it again.
Follow those instructions but do NOT download the Tmobile Wing's ROM since you don't have a Wing. Download the HTC ROM that was made for your device. (His SPL is only found on some Heralds, not on the Wing or other Atlas devices.)