911 - Touch Pro2, Tilt 2 Windows Mobile ROM Development

NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz

LVjrod said:
NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
Click to expand...
Click to collapse
If your phone is CDMA (sprint/verizon) make sure you have a CDMA ROM (there arent very many available), if not try flashing the phone again from the rainbow screen (bootloader) you may want to download the ROM again too, some people have had bad downloads.

so i can redo it from rainbow screen

Yes Put your phone in boot loader ( rainbow screen) and reflash. Who is your cell carrier? If it is Verizon or sprint then get a CDMA rom, AT&T and T-Mobile get a GSM rom

its sprint
wen i tried it said that i dont have usb on, its not readin it

LVjrod said:
its sprint
wen i tried it said that i dont have usb on, its not readin it
Click to expand...
Click to collapse
When you put it in boot loader then plug in your USB cord does it go from serial to usb on your phones screen? It may take a min for it to change

it says to follow the instruction on the pc to sync or sumthing like that
and restarts
and again on that TP2 screen and not doin anything

ok step by step.
1. uplug phone from pc
2. Pull out bat and put it back in
3. hold volume down to get to boot loader
4. plug in USB cable ( it should read on the last 1/3 of the screen near the bottom USB
5. Grab a CDMA rom from HERE or HERE
6. FLash the rom you got from step 5

i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help

LVjrod said:
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
Click to expand...
Click to collapse
Its cool. IF you look at the last white part of the screen on the bottom you should see something that says SERIAL when no cord is plugged in or USB once it is plugged in
If you dont then we can try using the SD card method
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.

yes it does say that
its on usb now
goin to try again

Why don't you take out your SD card and put it in your PC and drag and drop the verizon stock rom on the SD card...That would be just the nbh file...name it rhodimg.nbh then put the sd card back in and then put it into bootloader and flash it back that way?
Yea, just what zelendel instructed you to do....

this is the error
plz make sure its properly synced
plz retry after syncing

LVjrod said:
this is the error
plz make sure its properly synced
plz retry after syncing
Click to expand...
Click to collapse
Ok try the SD method I posted a few posts back

ok
will try it
thanks again

error 260
about usb cradle
but on the boot loader screen it says usb

LVjrod said:
error 260
about usb cradle
but on the boot loader screen it says usb
Click to expand...
Click to collapse
Ok maybe I wasnt too clear, when you flash from the sd card you cant have it plugged in

oh
sorry
redoing

ok its in process now
once it is done then wut

LVjrod said:
ok its in process now
once it is done then wut
Click to expand...
Click to collapse
Once it is done then follow the last step and use the stylus to hit the rest button after removing the sd card and it should boot up full. Where did you get the rom?

Related

I flashed GSM ROM over CDMA Lika RETARD! HELP!!!!

Did something extremely stupid......
I Flashed a GSM ROM (DUTTY's 5.2 ROM) onto a Sprint CDMA phone. STUPID! I wasnt paying attention and I dunno why I did that maybe cause i saw the features on XDA and normally I'm on PPCGEEKS but now I need Help. Is there anyways of getting a CDMA Rom back on the phone. I can still get into bootloader manually. But i Need to be able to transfer a CDMA ROM to the internal Memory. Is this possible without fully booting into Windows Mobile?
Thanks for ANY suggestions!
I'm not sure, but the difference between isn't in the OS rom, but in the radio rom.
But it should be possible to flash another rom directly from the operating system with the tool delivered with almost every rom. Enter boot loader and then connect via usb.
my comp is not recognising the internal drive
pretty sure you bricked your phone
I too did this when i first started flashing my phone because i did not know the diff between GSM and CDMA , so this is what i did to fix it
1.turn the phone on to bootloader mode(tri-colour screen) to do this power the phone on while holding the the volume down key.
then
2.plug your usb in and wait for it to say usb on the bottom of the screen,
3. now flash your phone with a stock rom
this is what i did and the phone was fixed good luck post back with your results
I did the same with my phone and I burned it. I sent it to service and they change the entire motherboard.
apaquette420 said:
I too did this when i first started flashing my phone because i did not know the diff between GSM and CDMA , so this is what i did to fix it
1.turn the phone on to bootloader mode(tri-colour screen) to do this power the phone on while holding the the volume down key.
then
2.plug your usb in and wait for it to say usb on the bottom of the screen,
3. now flash your phone with a stock rom
this is what i did and the phone was fixed good luck post back with your results
Click to expand...
Click to collapse
Windows does not recognize anything when in bootloader mode. =( New phone on the way... if someone can gimme a fix for this I will pay pal them $$$...
WOOT fixed it!!!!
Using <--, vol-down, and power-button sequence:
First Bootloader will automatically try to flash DIAMIMG.rom which is still the ROM that messes up ur phone in the first place do to user error. I went ahead and let the WRONG Rom install about half way then pulled the battery. I then turned the phone back on and to bootloader screen says " Rom Upgrade Failed, Please try again..." I then plugged in USB cable and the phone detected the USB plugged in. Then went and ran rom upgrade utility via windows.... and presto! Phone fixed. Whew... I had all my contacts, pictures of kids and video all saved on internal storage. I hope this help someone as stupid as me.

did i brick my blackstone??? PLEASE HELP!!!!

When i turn on my phone I get the Tri Colored screeen
and it says: Upgrade ROM error code please try again.
and then the phone turns off and on.... Please help....
please please HELP SOMEONE!!!!
Don't dispair! I had the same problem and got out of the situation: http://forum.xda-developers.com/showthread.php?t=505377&p=3677341
You probably have the wrong Original Rom from HTC installed (may wrong language).
To solve the situation you will need USPL. USPL will install. If you are using Windows Vista you will probably have to update the drivers (See the thread).
Once USPL is running install the Original HTC 1.56-ROM.
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
nobody else can help??????
Try to take out the battery for one minute or two, then see what happens when switching on.
If ok (usual start) make usual normal bootloader state, and see what is your SPL. Then decide which flash you have to do.
Mr. Nick said:
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
Click to expand...
Click to collapse
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
please help me!!!!!
dalamario said:
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
Click to expand...
Click to collapse
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
from my experience with HTC Wizard and what you are describing it
sounds like
your battery is very close to dead
you need to find a way to recharge it
your phone is protecting it by shutting off
also i don't know how valid this is for the Blackstone
but the wizard would not charge in tri-color mode
(again for battery sake)
so make sure you have a nicely charged battery (buy a spare or a table charger)
and then try to flash something again
P.S. i don't know how one sentence cries for help peppered with EXCLAMATION points encourage anyone to help you
nguyenbathanh said:
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
Click to expand...
Click to collapse
A clarification of the above post. When you have 3 colors (actually 4 with white color) and USB on the white band you have to start blac_uspl.exe. That will replace the original bootloader of your phone with cracked temporary bootloader named USPL. At this stage it shall no more give errors and you may flash it from the PC or from the memory card.
The suggestion for the battery also seems fair.
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
You have to copy the BLACIMG.nbh on the microSD using a USB card reader, not your phone. Then with the microSD on the phone, in the tri-color screen, it will automatically flash your ROM, if you don't have low battery of course.
If you want to use USPL to flash a coocked ROM (for your original official rom is not needed). Your phone have to stay at tri-color screen for more then 10s.
Perhaps your problem is a low battery as someone already suggested.
Do you have tried to remove battery and put it back, let the phone off and charge it with the wall charger?
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
wow
Mr. Nick said:
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
Click to expand...
Click to collapse
LoL
Dont stress so much next time. When your stressed out you dont think with a clear head. Glad it worked out for you.
The changing of ROM only seems can not brick your phone. Only unsuccessful changing of SPL can. Until SPL is OK you may ever flash new ROM.

Bricked device

Have been using roms no problem, but when updating today my PC died midway and now my experia is bricked. Will not connect to pc either so cant restart update. Ant suggestions out there woudl be appreciated.
Your pc died?
Maybe a bit more detail?
What did you do when it died? Did you have a blue screen of death?
did you tried hard resetting your xperia?
To help you we need some info of what you have been doing and have tried to do..
you can try to put a rom on the sd card and then go to bootloader.. (since i install my roms that way) it could work.
Good luck,
download a rom, put it in the root of your sd card renaming it kovsimg.nbh
turn off your device;
turn your device on while press audio down button
you will enter bootloader mode;
follow the on screen instruction
it's done!
bye
Luca
flash using a customRUU or using mSD card
As long as you can get into the tri-color bootloader screen your still ok. turn off the phone, then hold both the volume down and power buttons, and your should see the tri-color screen, from there you can use the customruu method from pc, or like l0rdsheva said with placing a rom image on the root directory of your cd-card and naming it kovsimg.nbh
Thanks to you all sd card did it.
Richardacc said:
Thanks to you all sd card did it.
Click to expand...
Click to collapse
I personally think that the mSD method is the best, just make sure you got 50%+ on your batt
both methods hav their own advantages. the best i think is MicroSD with the charger plugged in. because then if u drop your phone while flashing (which i've done ) it doesn't turn off, at least i think it doesn't, because when i dropped my phone and the battery fell out while flashing via pc and it continued regardless. (much to my relief!)

Need Help! Bricked Phone??

Hey all,
I was trying to upgrade my Topaz to WM6.5 and obviously something went wrong.. Now when I turn the phone on, it goes to the tri-colour screen but displays the message Upgrade ROM code error please try again. After that, it goes to the white loading screen and just stays there until the numbers 00068002 in red appear at the top of the screen. Then it goes back to the tri-colour screen. I've searched the forums and tried some of the suggestions out there. Nothing has worked! Was wondering if someone could really halp me out with some step by step instructions!! Thanx in advance!
PS: I have HardSPL 1.83 installed already. That installation went well without any problems. It was when I went to flash the rom this happend.
i would suggest downloading another ROM (try the orginal ROM of your language http://forum.xda-developers.com/showthread.php?t=576620) and copying the TOPAIMG.nbh onto your storage card (ROOT DIRECTORY). now turn the phone on by pressing volume + and power button and then follow on screen instructions.
good luck!
dont worry, just a bad flash because of a corrupted rom
redownload the rom or any other rom.
use the card flasing as described by Drag-on or remove the storage card, (just tomake sure it does not see the rom image on it). connect it to pc. wait untill it shows usb on the 3color screen. wait untill the pc is finished installing drivers and then start the customRUU. that came with the rom you are insatalling
that should do the trick
success
Here's the thing, when I connect the phone to the PC, the PC can't find the phone anymore.. Well, it is connected, but it's not showing up on the computer.. I also don't know the original rom language for my phone.. My serial number begins with HT947L, anyone know?? I tried installing from the computer but it gives me the invalid vendor ID error..
ur computer is not suppose to read it like it would normally. (it wont recognize it in device center) but its connected. use the ruu that comes with the roms u download and u should be able to reflash ur device and dont worry its not bricked.
if u trying to do it manually rename RUU_signed that u get when u download a rom. rename it to topaimg and copy it to the root of ur microsd. then insert the card into the phone and turn it on. now ur phone should recognize the new rom and ask u if u want to install it. hope this helps
I haven't been able to find a rom that works.. I've tried several roms.. I rename them TOPAIMG.nbh and put it in the sd card but it never works. The phone will go to the loading screen and then the numbers 00068002 in red appear and then it just goes back to the tri colour screen with the words Upgrade ROM code error please try again. It just stays there after. When I try to do it manually from my computer it keep sgiving me the Invalid vendor ID error. I'm totally stuck.
I don't know if this will help, but when trying to do it manually, the program says I don't have a img on the phone. the version of the img I have is just left blank.
Update: Thanks for everyone's help! I finally found a rom that actually worked. It installed and everything. I still don't know why it had to be that certain rom and I still don't know why I couldn't flash from the SD card method. I'm really just happy everything is up and running again. I'm never flashing my phone on my own again.. lol.. If anyone knows why I couldn't flash from my sd and why I had to get a certain rom even though I had HARDspl installed please let me know. I would like to know just for future reference.

Hero stuck on boot screen

My phone was acting crazy today so I rebooted the phone and now it is stuck on the htc boot screen . I am running Fresh Toast v2.1 and haven't made any changes for over a month . I try go into recovery by holding the home key but it does nothing , just hangs . I tried to see if fresh kitchen would see the phone but it doesn't . Any help would be greatly appreciated . I have noticed that the phone will restart after hanging for about 5 mins but of course it still hangs .
I cant get into recovery , however, the only screen that comes up is the screen with 3 droids on skateboards and it says
clearstorage
Click to expand...
Click to collapse
Clear....
Click to expand...
Click to collapse
Done.....
Click to expand...
Click to collapse
<Menu> Reset Device
Click to expand...
Click to collapse
I should add that when I hold down the home and power key , it doesnt take me into recovery anymore , it takes me to the screen with 3 droid on skateboards and says clearstorage .
huedawg said:
My phone was acting crazy today so I rebooted the phone and now it is stuck on the htc boot screen . I am running Fresh Toast v2.1 and haven't made any changes for over a month . I try go into recovery by holding the home key but it does nothing , just hangs . I tried to see if fresh kitchen would see the phone but it doesn't . Any help would be greatly appreciated . I have noticed that the phone will restart after hanging for about 5 mins but of course it still hangs .
I cant get into recovery , however, the only screen that comes up is the screen with 3 droids on skateboards and it says
Click to expand...
Click to collapse
im allso having this problem i have tried like everything to restore my phone but still just stays on the htc boot screen.
cbwhat said:
im allso having this problem i have tried like everything to restore my phone but still just stays on the htc boot screen.
Click to expand...
Click to collapse
Can you get into your recovery?
huedawg said:
Can you get into your recovery?
Click to expand...
Click to collapse
i can get to the menu where you wipe and can go to usb toggle and restore to a custom rom yes
cbwhat said:
i can get to the menu where you wipe and can go to usb toggle and restore to a custom rom yes
Click to expand...
Click to collapse
Do you have a nandroid backup ? If so , try restore . I cant even get into my recovery . If dont work maybe try Turn it off and try to hold the power and home key. IF you get stuck again, hard reboot again (battery), load up, THEN turn it off again. This time, turn it on with the (-) volume button held down.
Have you tried taking the battery out for 30 seconds and putting it back in?
Dave2582 said:
Have you tried taking the battery out for 30 seconds and putting it back in?
Click to expand...
Click to collapse
yes i have
huedawg said:
Do you have a nandroid backup ? If so , try restore . I cant even get into my recovery . If dont work maybe try Turn it off and try to hold the power and home key. IF you get stuck again, hard reboot again (battery), load up, THEN turn it off again. This time, turn it on with the (-) volume button held down.
Click to expand...
Click to collapse
i have no problem getting to the recovery screen its just that i have tried different roms and they all dont work, even ones i have had installed on my hero before. it just stays at the htc boot screen. i have tried reformatting my sd card and partioning it and repartioning it. wiping everything. my nandroid backup didnt work either.
cbwhat said:
i have no problem getting to the recovery screen its just that i have tried different roms and they all dont work, even ones i have had installed on my hero before. it just stays at the htc boot screen. i have tried reformatting my sd card and partioning it and repartioning it. wiping everything. my nandroid backup didnt work either.
Click to expand...
Click to collapse
Sounds like its time to ruu
Well, if worst comes to worst, just run the RUU and start over again.
huedawg said:
Sounds like its time to ruu
Click to expand...
Click to collapse
what is ruu?
cbwhat said:
what is ruu?
Click to expand...
Click to collapse
Click on the link above that Dave provided and download that . Put it on your sd card and flash it . This will take you back to stock but you get to start the fun stuff all over again . Last case scenario . It could be worse , I mean , at least you have options . As of now , I have no way of communicating with my phone and no access to recovery . I might be screwed .
huedawg said:
Click on the link above that Dave provided and download that . Put it on your sd card and flash it . This will take you back to stock but you get to start the fun stuff all over again . Last case scenario . It could be worse , I mean , at least you have options . As of now , I have no way of communicating with my phone and no access to recovery . I might be screwed .
Click to expand...
Click to collapse
i went to usb toggle and put the ruu on the root of the sd card then i went to flash zip from sdcard and it says no zip found. what do i do?
It's a Rom Utility Update. Just download the RUU, install it, then run it. Follow the directions within the RUU. You will have to plug your phone to the PC and let the RUU do its thing. When it's completed, your phone should have a factory stocked ROM.
cbwhat said:
i went to usb toggle and put the ruu on the root of the sd card then i went to flash zip from sdcard and it says no zip found. what do i do?
Click to expand...
Click to collapse
Just go into recovery and choose flash . Find the ruu that you added to sd card and flash it .
huedawg said:
Just go into recovery and choose flash . Find the ruu that you added to sd card and flash it .
Click to expand...
Click to collapse
I believe it's an .exe file. I don't think you can flash it through recovery.
Dave2582 said:
Just download the RUU, install it, then run it. Follow the directions within the RUU. You will have to plug your phone to the PC and let the RUU do its thing.
Click to expand...
Click to collapse
well i pluged it in thought the usb during boot and in the recovery usb toggle and when i run the ruu i get a error 170 usb connection error
Try turning the phone off completely, then run the RUU again.
Isn't there another way to boot? I remember something about using the down volume button, the back arrow and booting... that's probably not the actual keys, but I know it was different from home and power. Anybody?

Categories

Resources