Stuck Wizard - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!

sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
u prob. d/c ur cable when you were flashing a rom
this happened to me
the solution for me was to just reflash a rom

Hello,
sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!

eXPLOiTeD said:
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!
Click to expand...
Click to collapse
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)

Hello, Maybe this helps....
sephiroth_vg said:
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)
Click to expand...
Click to collapse
ok... if it`s shown in device manager the the phone is detected by the PC that`s in bootloader mode and connected....
If your phone is CID locked... i have to flash to a official IMATE K-JAM ROM.... you can` find some here... http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
And when you try to charge the phone... orange light must apear, if you say that it don`t indicate... then i think it doesn`t charge...
Regards & Good Luck!

man sadly no orange light.....the screen just turns white when i plug it in...sometimes even that doesnt happen...but a VERY RARE (2 times) the red light flashed for just a fraction of a second...and the links for imate roms are dead..i tried access to the ftp site and there is nothing left in the imate folder at all...anyways..i tried to flash the rom from imate website...even that wouldnt flash..says phone not detected..

Related

Battery Problem after upgrading with new uk t-mobile rom

Hi,
i upgraded my charmer with the new uk t-mobile rom and my nproblem is that the battery does not charge,and i don't know how to do
have you some suggestions???
Waiting your answer,thanks a lot,Antonio
Hi did you get a answer
Hi I have the ssame problem, did anybody come up with any ideas ?
Cheers
TBW
Battery Problem
Hi, I have too this problem with wm6 rom have you some suggestions??? pleas
Hi...nobody can help us???
Try plugging in the charger and when its plugged in, hit soft reset button with your stylus. Wait for the system to boot and see if it charges.
vlodeck said:
Try plugging in the charger and when its plugged in, hit soft reset button with your stylus. Wait for the system to boot and see if it charges.
Click to expand...
Click to collapse
i have the same problem and doesn«t work for me
Then my guess is you flashed a ROM not intended for your device.
now how i can solve this?
Reflash a charmer rom? And if that doesn't work, try a prophet WM5 rom.
it says that i don't have enough battery, is lower than 50%
Use the NO_ID RUU version instead.
i already try a few roms and i can't flash the pda with none of them
You will need to reboot in BootLoader mode first (powerkey+camera+reset).
hello!
a downgrade my Charmer and now the battrery is 0%, when i connect to usb phone don't want to start, on charger it startet but battery dont want to charge. help pls ...
Hi,
I have solve this problem but I'm not sure how I've done this.
1. dowlnoad cab from this link http://forum.xda-developers.com/showthread.php?t=327988
2. I have use program Wizard Service Tool and clear everything what is possible including format.
3. reset
4. format after strart camera+record+soft reset
5. after reset bootloader mode, and first time my phone has connet in BLmode with USB.
6. Then I have run original T-mobile RUU and it's working
My battery has been on 0% in system as well but after downgrade battery states about 70%
have a same problem.
did anybody else solve this problem? anybody used SD flashing method?
i've solved problem partly - now battery charges, but i can't start it without power supply. so what have i done:
1) i've downloaded ShellTool_bugfixed.zip (you can easily find it google).
2) unpack it.
3) copy Cert_SPCS.cab and EnableRapi.cab to you WM and install
4) extract nk.nbf from original Charmer ROM into ShellTool folder
5) start ShellTool.
6) press Get ROM Info
7) press Extract OS
10) press Flash OS
11) press ОК
Followed all this steps, now i've got an original charmer os, but bootloader is still from previous crap ROM. so there is trouble with starting it up. If you phone doesn't start even when you charging it from power socket, so try to wet contacts on battery - it should work.
now i thinking how to re-flash bootloader, cuz it cannot enter into bootloader witout power supply from socket. It's no possible to flash it from PC, cuz it cannot enter a booloader plugged into USB port. It seem that there is not enough power impulse to startup.

Big Problems!!! System is freezing all the time!

Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
DerGregen said:
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
Click to expand...
Click to collapse
Flash from bootloader. Make sure you're hard SPL though, or that it's a compatible ROM for your CID.
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
manuv1615 said:
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
Click to expand...
Click to collapse
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
DerGregen said:
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
Click to expand...
Click to collapse
You said that you could enter bootloader menu right?
now tell me, whats written there?
i'll wait here,.
Theres a 4 colour screen (red, green, blue and white)
And in the red bar is a text with a yellow font:
KAIS139 MFG
SPL-1.0.0liPof
CPLD-8
And below in the withe bar stands "Serial" or "USB.
What rom did you use?
try HardSPL 3.56 by jockyW,.
then reflash your ROM,.

Installing WM on BA

I did everything the site said, but I ran stuck when it asked me to use the upgrade MaUpgradeUt_noID, I run the upgrade then nothing happends when it sees for the device version. well then I click just on upgrade then it sais its finished then cold reset but theres no Stripe screen coming(for the boot) I also just pressed Camera and record buttons but nothing helped.. someone can help me?
hey dude!
dun worry
first u need to see the information dialog
which tells you the version of rom u have already and the version u r upgrading to.
So, as far as i judge is that, u have to have an nk.nbf, ruu.dll, ruu.conf, getdevicedata.exe, enterBL.exe and finally Maupgradeut_noid.exe
put ur device in bootloader prior to run the upgrade process.
press ur record + on/off then press reset (keep pressing three buttons for 2 seconds) U will see SERIAL written at top on ur BA's screen. Connect the usb cable to your BA and disable usb connections in active sync. then run upgrade process
just run the upgrade. It will take 25 minuts
U need to put out the mem card too before putting to bootloader
(u need just one nbf file at a time)
dark_prince said:
hey dude!
dun worry
first u need to see the information dialog
which tells you the version of rom u have already and the version u r upgrading to.
So, as far as i judge is that, u have to have an nk.nbf, ruu.dll, ruu.conf, getdevicedata.exe, enterBL.exe and finally Maupgradeut_noid.exe
put ur device in bootloader prior to run the upgrade process.
press ur record + on/off then press reset (keep pressing three buttons for 2 seconds) U will see SERIAL written at top on ur BA's screen. Connect the usb cable to your BA and disable usb connections in active sync. then run upgrade process
just run the upgrade. It will take 25 minuts
U need to put out the mem card too before putting to bootloader
(u need just one nbf file at a time)
Click to expand...
Click to collapse
I cant find those files, even on the internet to download, I cant find it can you upload it for me or something?

Bricked phone TyTN II....crap....what to do ?

Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
mfesenko said:
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
Click to expand...
Click to collapse
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
denco7 said:
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
Click to expand...
Click to collapse
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
mfesenko said:
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
Click to expand...
Click to collapse
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
denco7 said:
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
Click to expand...
Click to collapse
Nope, it just does a regular soft reset , and back to the same screen
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
JugglerLKR said:
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
Click to expand...
Click to collapse
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
mfesenko said:
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
Click to expand...
Click to collapse
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
mfesenko said:
Nope, it just does a regular soft reset , and back to the same screen
Click to expand...
Click to collapse
Keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
JugglerLKR said:
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
Click to expand...
Click to collapse
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone.
Maybe you didnt read well enough..
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone
Click to expand...
Click to collapse
YOU AREN'T BEING ASKED TO HIT JUST THE POWER BUTTON
try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to pc and see if you can run the ruu in your stock rom.
Click to expand...
Click to collapse
keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
Click to expand...
Click to collapse
THAT MEANS DO IT AGAIN !
Thanx
Thank you denco , for the info , and thanx chumley for beating some sence into me. So i got to the bootloader. Do i need to instal my original rom or can i just reinstall the one i got or maybe another one?
well I have the same problem.
It started with the edfc problem explained here
While trying to fix that problem, I switched my rom to the TPC elite rom series (windows 6.5).
All went fine till three days later, while text-messaging, the screen freezed. I removed the battery, restarted the device and found myself having the same symptoms discussed in this threat.
Putting my phone into bootloader doesn't work, and I think It has to do with the problem I had before; that apart from the directional buttons and the power button, all buttons are defunct.
Anyone any suggestions? (apart from: don't bother us, etc, etc...)
my phone randomly bricked too a while back....as far as I understand is that either you CAN put your phone in to bootloader or your phone is junked....correct me if im wrong ppl
.....make sure you hold the camera and power buttons then reset with stylus....
and make sure you install your stock rom...aka the att tilt rom
if you didn't do it already...
1. flash your original rom (SD card method - Step 5 Flashing Via MicroSD Card ) you need the rom to be at least from the same operator. it should run just fine, just as long as you follow the directions.
2. HardSPL,SIM CID unlock, etc. as described on the same forum i pointed to a little earlier. from this point on you should have a phone just like it was when new.
try to read more carefully (maybe a few times) and search before you start a new thread.
on the wiki and in the stickies in the rom development section you get a lot of "bricked" solutions. you just have to read them all and see what is your case...

911

NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
LVjrod said:
NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
Click to expand...
Click to collapse
If your phone is CDMA (sprint/verizon) make sure you have a CDMA ROM (there arent very many available), if not try flashing the phone again from the rainbow screen (bootloader) you may want to download the ROM again too, some people have had bad downloads.
so i can redo it from rainbow screen
Yes Put your phone in boot loader ( rainbow screen) and reflash. Who is your cell carrier? If it is Verizon or sprint then get a CDMA rom, AT&T and T-Mobile get a GSM rom
its sprint
wen i tried it said that i dont have usb on, its not readin it
LVjrod said:
its sprint
wen i tried it said that i dont have usb on, its not readin it
Click to expand...
Click to collapse
When you put it in boot loader then plug in your USB cord does it go from serial to usb on your phones screen? It may take a min for it to change
it says to follow the instruction on the pc to sync or sumthing like that
and restarts
and again on that TP2 screen and not doin anything
ok step by step.
1. uplug phone from pc
2. Pull out bat and put it back in
3. hold volume down to get to boot loader
4. plug in USB cable ( it should read on the last 1/3 of the screen near the bottom USB
5. Grab a CDMA rom from HERE or HERE
6. FLash the rom you got from step 5
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
LVjrod said:
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
Click to expand...
Click to collapse
Its cool. IF you look at the last white part of the screen on the bottom you should see something that says SERIAL when no cord is plugged in or USB once it is plugged in
If you dont then we can try using the SD card method
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
yes it does say that
its on usb now
goin to try again
Why don't you take out your SD card and put it in your PC and drag and drop the verizon stock rom on the SD card...That would be just the nbh file...name it rhodimg.nbh then put the sd card back in and then put it into bootloader and flash it back that way?
Yea, just what zelendel instructed you to do....
this is the error
plz make sure its properly synced
plz retry after syncing
LVjrod said:
this is the error
plz make sure its properly synced
plz retry after syncing
Click to expand...
Click to collapse
Ok try the SD method I posted a few posts back
ok
will try it
thanks again
error 260
about usb cradle
but on the boot loader screen it says usb
LVjrod said:
error 260
about usb cradle
but on the boot loader screen it says usb
Click to expand...
Click to collapse
Ok maybe I wasnt too clear, when you flash from the sd card you cant have it plugged in
oh
sorry
redoing
ok its in process now
once it is done then wut
LVjrod said:
ok its in process now
once it is done then wut
Click to expand...
Click to collapse
Once it is done then follow the last step and use the stylus to hit the rest button after removing the sd card and it should boot up full. Where did you get the rom?

Categories

Resources