I tried to copy a bunch of files to my sd card and it crashed during it and says that the sd card is damaged. it says it needs to be formated. but when i try to do it in hero it does nothing. How can i format it. when i try to phone just sits there and then locks up and shuts off. have to pull battery and restart.
no one has a answer. there has to be a way. i need my sd card. i dont want to have to buy a new one when i have 2 that should work.
I had a similar issue with a 1 year old 16GB card last week. Card was destroyed and I couldn't get anything off of it. The MBR was damaged and wouldn't be re-written. Had to go get a new card :-/
Tried this one:
http://www.sdcard.org/consumers/formatter/ ?
/ Regards
I used my mac and disk utility to format, partition and a bunch of stuff... then i formated using my hero. it worked after that
Related
On my computer it's fine. I just want to listen to my music. Damaged or not.
What causes Damaged SD cards?
Try to reformat it and see if it works. There are several things that can cause a card to go bad.
I have and just spent countless hours getting music on the card and I downloaded an .apk when I got error (Installed and worked fine) then just got error.
How to safe me from these from happening again?
All my apps are gone due to app2sd bummer
sillyshy said:
How to safe me from these from happening again?
Click to expand...
Click to collapse
Just do what you always prolly do. Just make sure to unmount before you disconnect. Sometimes the cards can just go bad. Just make sure to get a name brand card and get a class 6 (you don't have to). It was prolly just a fluke.
Sandisk 8gb class 2 I do unmount error for past 3 months. Know I can't get back my apps2sd to rework after I did a format.
How did you format it? In the phone from UI? If so then it erased your ext partition.
Look in HERE for good guide on how to check what partitions do you have and to format and repartition.
Good luck
If your running swapper, you need to turn it off before mounting. Thats the main cause if its not actually damaged.
I had that happen to me when I tried using Apps 2 SD 2. It said it corrupted my SD, and when ever I tried to unmount from the PC, it would freeze up. I just backed it up, deleted all my partitions, reformated and made new ones. What ever A2SD you're using, make sure you follow tuts correctly.
If you use AppsToSD to partition your card and you get an error saying that your SD card is corrupted or damaged, ignore it. Take out the card, format the Fat32 partition on your PC (a full format, not quick erase). When it's done, both the Fat32 and ext2 partitions will be there. I have experienced that problem several times.
Also, you can do adb to get the files off the ext2 partition before you use the phone to remove the partition and re-format the card.
Well guess what all I did was turn off my phone overnight and charge it. This morning turned back on got the same good message after spending 5 hours putting music onto my card. So this time I am doing a full format of the card and just using fat32 nothing more no apps2sd I think that may be my problem. Cause when using it I don't get the option to safe remove the sd card in SD card settings.
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Sandisk SDHC Class 2 goes dead, and won't get detected
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Yea that happens my 1yr 8Gb class 6 dies a while ago but that was from my using it for readyboost and eboostr(unrelated).Now i got this 4gb class 2 thats pretty fast If you had swapper then i think the card could be damaged, try formatting that sd card in recovery mode.
there is a way to reformat the card if its not physically damaged but it seems like yours is. I dont rmr the commands to do it in gparted, butits possible
Ok.. the other day I had booted my phone into recovery so that I could do a nandroid backup, the backup was completed but when I restarted my phone I got a mess!get saying my ad card was damaged, it prompted to format which did nothing. I took the card out and plugged it into my computer which was able to see it and read the files. I am confused because my comp will read the card and I am able to flash files off the as card thru recovery. I have tried reformatting the card thru my pc and thru recovery but no luck.
I have read through a lot of different threads regarding as cards not reading or cards saying that they are damaged, but I have tried everything and my hero will not read the card and says its damaged.
If anyone has any ideas on what to do plz let me one.
Thanks
time for a new sd card.
I've had this happen to me many times and the file that's always the culprit is the file that contains the small images of web pages for the bookmark widget. Running a check disk in recovery mode fixes the prob right away.
I think the file is bookmark_thumb.1 or something like that.
I had the same thing happen to me on a
8 Gig sd. everytime i hooked to the pc it would ask to format and than would show damaged on my phone. I took mine out for a while and formatted it in my pc. Quick and regular. I used it to transfer files for a while not saying you have to do it this way. I have recently put it back in my hero and it is working fine. Its only a 8gig class 2 card. im looking into a higher class card soon.
I have AT&T Tilt with Sakajati's HyperDragon IV Windows Mobile 6.1 OS ROM, I also have this 8 GB micro SD card, which has around 3.5 GB of data, but for some reason I am not able to write on it any more. When ever I tried to format it I get this message which says " The card is write protected" I don't remember putting any password or anything. I can read data from that card on any computer or phone, but can write anymore data on the card. I can't delete anything from the card either.
Can someone suggest what could be wrong with the card and how can I unlock it?
I have tried low level format also, the format completes without any error, but when see in file explorer all the files are still there. If I try to format from SD formatter, I get error "The memory card is write protected", windows format doesn't give any error, just runs and in the end says "Windows can't comeplte the format". Card is working file and have no problem in reading the data it has, just can't write new one ot delete old one.
This is very weird problem... any help/comment is good.
Not sure if this will help....
I've had very similar issues over time...
Because of high TomTom & Music Use.
Both are loaded and work off my SD Card (6 GB worth)
What I finally found that worked for me, was to get a 2nd card and backing up my SD card to my Desktop PC, so later I could transfer to the 2nd SD Card when needed.
Then I do a Complete Format [Full FAT32 Format] of the old SD Card, via the Mini SD adapter on my Desktop PC.
I found that formating within the phone doesn't always work...
If this is not the case I can think of 2 other reasons for potential problems..
~Some ROM's require the removal of SIM & SD Cards when installing?
~If you were using an adapter formating the SD Card and it was not set to write mode?
Best of Luck!
JAC,
Thanks for your reply, but I have already tried FAT32 formatting using micro sd card, but as I said before, but it errored out.I even tried low level format, but didn't work. There is no locking swithc or anythign in micro SD card, not sure how the data can be locked. If it was ecrypted I was not able to read data on other devices. So what happened? Any help!!!
Like everything else, sometimes things just wear out, break or are just low quality to begin with. If you can read it on other devices, then transfer it and get a new card.
There is also a trick used by nefarious suppliers that takes a 4GB (or any size chip) and format it in a way that it appears as a larger chip. Then when you go to write to it the whole thing goes crazy.
This is why I recommend using reputable resellers and buying good quality Name Brand Chips, Like Sandisk or Kingston.
I'm having a weird problem with a Nexus One. It had a 2GB microSD card in it that seemed to go corrupt (all the file names went crazy) so I reformatted it and it happened again within minutes. So today I bought a new 8GB microSD card and and the Nexus now gives the error of "Blank SD Card - SD card blank or has unsupported filesystem." It is unable to format the card, but it doesn't give an error. I tried formatting the card to FAT32 on my computer, still the phone thinks it is blank/unsupported.
I'm hoping the SD slot isn't fried... any thoughts?
You could try reformating the SD card in a computer using SDformater with erase on.
I have the same problem for a few weeks now. My phone can't seem to read the sd card at all. Thought it was the sd card so I bought a new one, but problem remains. I know both cards work (have tested them in another phone and the computer reads them). I've tried formatting the card in the phone and reformatting with erase on using SDFormatter in my computer but my phone refuses to read it. Think it might be my sd slot as well...
Currently running CM 7.1.0. Haven't tried a factory reset or flashing another ROM (how would one go about doing that with no sd card?) as I'm not too keen to lose that data if I can help it.
Did you manage to fix it?
I was not able to fix it and after many hours of troubleshooting, so I gave up. Good luck to you, and please reply if you find a solution.
Hi guys, I have a 64GB SanDisk Ultra MicroSD class 10 card. I use it on my Samsung Galaxy s3. Couple of days ago I went to my friend and ask him to give me some movies. He was sending it via data cable but we got frustrated and we had to go somewhere so in the middle of transferring data he unplugged the cable and now my SDcard isn't working anymore. I mean can it be damaged just because we unplugged it in the middle of transferring? I've done it so many times before but it wasn't really a problem. Anyway I'll try to explain what I did with my card since then and what was it's response.
1. The data in the card is intact, I've backed it up as well and when I put my card into my phone it works perfectly. (btw the card was in FAT32 format)
2. I can copy stuff into my card but when I put into my phone it wouldn't show and when I put it back on card reader again the file disappears.
3. I can delete stuff from my card then I take it out and put it back again and the file that I've just deleted comes back.
4. I've tried formatting it but it would give me an error.
5. I've used Easeus partition manager but it would give me an error as well.
6. Then I've used the software I've used when I first formatted the card to FAT32. Guiformat. It would format my card normally but when I go into my card all the files are there.
7. I've tried using commands like "chkdsk d:/r or chkdsk d:/f etc but after like 44% it would say certain files are invalid and can't continue the do the checkdisk command (the file it shows was the files I tried to get from my friend)
8. I've tried so many other stuffs but none of them seems to able to format my card.
now my question to you guys is my card really dead? can it be dead just for interrupting file transfer? is there any way to get my card back to normal? anyway I can format my card? I'd really appreciate it if any of you guys can help. Thanks