I've looked all over, and I believe I already know the answer to this..
But of course while flashing ROM's and themes and whatnot, I believe I've bricked my G1. Turning it on just leaves it hanging at the T-mobile G1 screen. I cannot get into recovery or fastboot mode. (Again, nothing happens when I hold down Power + Home, or Power + Camera).
Going to say it one more time, because I've been looking things up all morning...and people seem to ask this a lot I cannot get into recover or fastboot mode. Holding down Power + Camera, Power, or Power + Home just leaves me with the same results, stuck at the T-mobile G1 screen for hours+.
Is my phone bricked? Am I screwed? is there anything I can do, or does this require replacing hardware? I've heard of some people finding a way out of this, and I've also heard others saying I'm screwed.
I received my G1 from customer care from T-mobile... So I guess I can technically return it? Should I just send it back, or will they know I've broken warranty by playing with the software?
If you can't get into bootloader, or recovery, you are bricked.
yep, prob bricked .but have you tryed just as a last resort, take out your battery, hold the camera button, and put it back in to see if it will boot into the spl. if it doesnt start right away, try holding power right after doing it again
__________________ B-man007 get's all the credit if it work worth a shot good luck
So I figured. I tried the power thing, Lucky69. No luck here.
Does anyone have a suggestion on what I do? Like I said, I've only had the phone for a couple of days now. Is it possible to return it to T-mobile? Do you thnik they'll know what happened and say no, or just flash the device and get me a fixed/new one? Can I open it up and fix it myself?
just act like when you tryed to turn it on it dont work .they should replace just don't tell them you been messing with it .but if you can't get into recovery,bootloader ect then it's done for .also if t mobile give you any trouble ,then call htc and go that route . but if you only had a fews days should be no problem good luck
Yeah, if you just got it a few days ago, it shouldn't be a problem. I'd be willing to bet tmobile will even replace it. That will save you the hassle of going through the HTC route.
That's what I was going to try. Say something about I was prompted to OTA update to 1.5, Walked awayrot he phone, came back and it was as is. I just don't know their ability to open it up and look at it/hook it in and see a ROM on there, ya know?
ya ,that would be good to say .also the tmobile store prob won't know at all just take it in .i haven't ever heard of any one getting refused unless you tell then you what you were doing .don't worry they won't come after you .just play it cool .you aren't the first one to do this .but the sooner the better then you will have your phone again .then you can go back to it just be carefull on what you flash .good luck. just say it said update and you hit ok then that's when it did it .
Related
hey guys i have a g1. its rooted.
i tried to get the latest custom radio. but idk why after wiped and then i used update frm sd. its did something then asked to reboot to finish installation . then the "Unboxing and an arrow to phone" came up. and its not going away .. its always there... i removed the battery fone ... tried to go to the recovery mode. nothing works .......
Need HELP!!!!!!!!!!!!!!!!
You said you cannot get into recover home + power
Can you get into the bootloader?? (camera + power)
If you can't boot into either of theese modes, then you probably bricked your phone during your radio update
nope.. i tried. the same screen comes up...
so there is no way to fix it now?
If you search around the forums abit there's a couple things you can try that will work in the chance that somehow it's just a softbrick....
However, not being able to boot with camera + power or home + power , is usually a sign of a brick
i think i got a softbrick.... cause its not the G1 sign.. the installation sign thats on the screen.. "Unboxing and an arrow to phone"
anyhow tnx dude
o7hafiz said:
i think i got a softbrick.... cause its not the G1 sign.. the installation sign thats on the screen.. "Unboxing and an arrow to phone"
anyhow tnx dude
Click to expand...
Click to collapse
Doesn't matter what you can see on-screen, if you can't get in to the SPL (home+camera) and can't boot the phone itself, then the thing's dead. Simple as.
Only way to fix that is to take it back to HTC/Tmo and say that's what happened after an OTA update, or replace the motherboard.
What radio were you trying to flash? One from the Hero?
not looking good :/
That part where you said unboxing.. by forever did you mean atleast 10 minutes? sometimes this part can take forever.. If you yanked the battery while it was still updating the radio odds are you're sol :/
Also did you have the correct spl installed? sadly jacking up the radio install is the easiest way to perma brick your phone...
i tried to flash this rom http://forum.xda-developers.com/showthread.php?t=552591
then i tough it'll be better if used the latest radio as that ask... so i used "update-hero-radio-63.18.55.06IU_6.35.08.22-signed" i pasted it on my sd. then used update frm sd zip...
the installed and asked to reboot.. i did then i installed but that the end that screen came up =/
So in short you tried to update a G1 with a Hero radio image. I think that's the first time I seen this one. Not sure where to point you too at this point.....
jackslim said:
So in short you tried to update a G1 with a Hero radio image. I think that's the first time I seen this one. Not sure where to point you too at this point.....
Click to expand...
Click to collapse
The "ROM Flashing for dummies" book? ;P
Moral of this story, don't flash radio images intended for other devices!!...Or ROMs for that matter. They won't brick but without the required drivers they aren't going to work.
so thats it.................. i just leave it like that......... trash that fone? lol
that radio was a mistake.. i didnt read that name.. i thought it was for g1's htc rom.. but w.e
tell what should i do... just leave it till i get a solution?
o7hafiz said:
so thats it.................. i just leave it like that......... trash that fone? lol
that radio was a mistake.. i didnt read that name.. i thought it was for g1's htc rom.. but w.e
tell what should i do... just leave it till i get a solution?
Click to expand...
Click to collapse
Depending on how long you've had the phone, if it's been less than a year, you could call T-Mobile and say something to the affect of, your phone said it needed to reboot to apply an update and now it's stuck on this screen etc.. etc.. , and they would probably issue you a replacement, however if you get caught doing this, they could charge you an additional fee, and this is probably considered an insurance scam, you can decide what you'd like to do on your own, I just wanted to throw that little disclaimer in
nice to you find such matter funny.
anyhow ... i press and held the track ball and hit power button.. the blue like came out and the screen is black... O-o is that a good sign?
please help guys
Trackball does nothing but put it into "blue light mode", the ones you need working are home+power & camera+power. there are several pseudo solutions that claim to work even if these key combinations don't and perhaps they do for a few that are only softbricked. But, there are several hundred people with G1's in paperweight mode who'd beg to differ.
Alas, you've got alot of reading ahead of you, which could have been avoided had you done more reading in the first place :/
My suggestion, being that it seems you're fairly new, with a fairly new phone is follow jackslim's advice above and do alot more research next time...
thank you all of you...
ill go talk to T-mobile tomorrow see if they are able to help...=/
but i just wanned to show how the screen looks like
http://i27.tinypic.com/10rskyx.jpg
once again thanks for the advice
kinda odd tho. have you tried putting rc29's DREAIMG.NBH on the sd and holding camera+power...
Edit: then again, a hero radio on a "not hero" could definitely cause "odd"
oh and don't forget to atleast wipe your sd before going to t-mobile....
I'm on Darky's ROM since 9.2 and I've been flashing different stuff with 100% success rate... So far.
My girlfriend also bought a Galaxy S (the I9000, just for info) and me, considering myself a "veteran flasher" (but in real life, still being a tutorial-following guide monkey) told her "Hey, you know what - I can make your phone ten times better, just give it to me overnight".
So I prepared the phone... factory reset, etc. The 3-button combo didn't work (hmm, strange) but I looked around for a solution anyway - found one involving Odin, ADB and updating the bootloader, but since a lot of people bricked their devices this way, I skipped it.
I got the phone to boot into download mode via ADB and then started the guide to instal Darky's Ressurection Edition. Connected to Odin, the phone was recognized and added, then I started it and Odin spat out an ERROR message, then the phone was stuck at the "black screen of death" (a phone and a PC connecting).
So... why the hell did this happen?
I've already flashed my own Galaxy S so I've done this maybe even twice... got drivers, Odin, everything! What went wrong and can I even fix this or I gotta buy a new phone?
you can probably use a jig to get the phone back to download mode.
buy one on ebay or make one yourself. theres plenty of guides online for that.
as for odin having an error im thinking you might have a corrupt file? try downloading it again.
can you go into recovery mode or any 3 button won't work?
But why did you just dont installed the 3 button method which gives you the change to flash other roms e.g.
Yes you risk to brick but you also risk but in my mind much bigger to brick your phone without 3 button so if something went wrong you have the change to go with the 3 buttons to the recovery menu...
Sent from my GT-I9000 using XDA App
Try getting the battery out for 1-2 seconds, put it back in and then try getting into download mode manually by holding first volume down+home and then also the power button.
If you can get into download mode, which is something I've found not to be pretty easy to erase, as it's independant from boot settings and files, all is still OK.
Yeah, I'll be out in the morning to buy the mats for a JIG, found a pretty easy guide how to make one, with pictures and everything.
The files being corrupt is something I didn't even think about, I'll re-download them if/when I manage to get the phone working.
Battery pull didn't do the trick, left it out of the phone for 4 hours, no dice.
After all, the phone is still under warranty and was recently 2.1 untill my gf updated it. Maybe I can tell that it's her fault, messing up Kies update or what? Then I'll get a free service/replacement, but I'll need a solid excuse to tell them. Any ideas? (yeah I know I'm an awful person but I can't afford a second Galaxy S, and the thought of giving her *my precious* because of my stupidity is just as awful)
rolfmao you made my day bro, my gf just bought a SGS as well but she saw me almost crying with the bricks i created, so as soon as i asked her if i could update her phone
she almost kicked me in the nutsack.
building a jig is pretty easy, you just need to practice touching the correct pins and you will be good to go.
as for the odin, it happends....i bricked my phone so many times
i just forced download mode and then reflashed with THE SAME FILES and it worked
my guess is that the connection is interrupted or something...causing it to abort or fail
FYI: Bricking means turning it to a brick, you can't revert from a "bricking"... Bad flash, ok! Black screen, ok! Brick, hum... if you can "unbrick", well, that's not bricking my friend!
All this to say the SGS is ALMOST unbrickable! With Jig, download mode, ADB, etc, there's so many way you can undo/redo things right!
You can say a lot of thing about the SGS, but the thing is made for developpers and flashers!
dikime said:
Yeah, I'll be out in the morning to buy the mats for a JIG, found a pretty easy guide how to make one, with pictures and everything.
The files being corrupt is something I didn't even think about, I'll re-download them if/when I manage to get the phone working.
Battery pull didn't do the trick, left it out of the phone for 4 hours, no dice.
After all, the phone is still under warranty and was recently 2.1 untill my gf updated it. Maybe I can tell that it's her fault, messing up Kies update or what? Then I'll get a free service/replacement, but I'll need a solid excuse to tell them. Any ideas? (yeah I know I'm an awful person but I can't afford a second Galaxy S, and the thought of giving her *my precious* because of my stupidity is just as awful)
Click to expand...
Click to collapse
Build a jig and do it yourself. Then if you run into trouble in the future - hey! you have a jig, no problem. Warranty situation is a bit iffy, sometimes they see that you screwed it up yourself....
t1mman said:
FYI: Bricking means turning it to a brick, you can't revert from a "bricking"... Bad flash, ok! Black screen, ok! Brick, hum... if you can "unbrick", well, that's not bricking my friend!
All this to say the SGS is ALMOST unbrickable! With Jig, download mode, ADB, etc, there's so many way you can undo/redo things right!
You can say a lot of thing about the SGS, but the thing is made for developpers and flashers!
Click to expand...
Click to collapse
Yeah, I know, but I read in another thread that if I get this screen AND can't get into download mode then I'm toast. That's why I used the word brick.
I decided I'll send her return the phone, equipped with her cutest and n00biest face so that they won't even think that there's a real idiot involved (me). And if they don't fall for that, I'll build a jig and try myself.
THIS IS WHY I HAVE NO GIRLFRIEND!!!
nah j/k!
But man... I didn't think you could actually brick the SGS. I mean, I always screw my rom up somehow, but the 3 button combos always work... Guess I'm just lucky... I'll try to be more careful from now on lol.
You bricking your SGS has taught me a valuable lesson! So thanks for that ^^
Sinotek said:
THIS IS WHY I HAVE NO GIRLFRIEND!!!
nah j/k!
But man... I didn't think you could actually brick the SGS. I mean, I always screw my rom up somehow, but the 3 button combos always work... Guess I'm just lucky... I'll try to be more careful from now on lol.
You bricking your SGS has taught me a valuable lesson! So thanks for that ^^
Click to expand...
Click to collapse
LOL, np
Anyway, I just sent her to return the phone, maybe it's a common problem because the guy there didn't even listen to her explaining the crude story I made her tell ("PC froze and then rebooted itself while updating" - yeah right!).
They said it'll be ready next week (hopefully).
This also thought me a lesson - maybe even two.
1) Never try crazy stuff on a Galaxy S without 3 button combo working properly.
2) Always have a JIG ready for use
When she gets it back next week I'll see if the 3BC works and if it does - yeah, I'll try to flash a custom ROM again
Thanks for this highly amusing thread lol the moral is.....don't mess with the womans phone if you want to live AND love
GTi 9000 insanity007/insane glitch
dikime said:
I decided I'll send her return the phone, equipped with her cutest and n00biest face so that they won't even think that there's a real idiot involved (me). And if they don't fall for that, I'll build a jig and try myself.
Click to expand...
Click to collapse
Best I've heard all day
But I must ask - how the ... did you manage to talk her into returning the phone herself...?? If that would have been me screwing up my gf's phone, she wouldn't let me in the house until I had fixed the darn thing myself.
I gave her mine - already heavily tweaked and loaded it with games like Plants vs. Zombies and Let's Create! : Pottery (she just loves that game). Plus I equipped MY cutest and n00biest face when I showed up to tell her the *cough* results.
This made my day. Apparently I thought only girls can put on a cute face and disarm anyone. LOL!
Regarding the brick, what I did was to repeatedly tried doing the 3BC then held all of it until the brick icon goes to download mode. Held it for 5minutes. No jig needed! If you keep it held down for some time, the phone resets itself. MAKE SURE THAT YOUR SGS IS CONNECTED VIA USB!
Good luck!
Sent using this XDA App thing from my awesome SGS
i think this is why all flash posts say make sure 3 button combo is working before you start... but I have had to use a jig to get mine back from the brink/brick once, almost made me cry as i needed my phone in 2 hours to meet up with friends
Oh yea... you will have to let us know what they said when she took it back. I am curious if they ask questions about how it got there and if they believed her... don't want to make things difficult in there but I know some companies who have products that are highly customisable (if "hacked like this") are suspicious of most software related problems
But getting the soft-bricked phone back to a new state with a new ROM would have been a great gift while returning the phone!
Dont u think so?
The whole idea was to get rid of the stock firmware and flash something epic ( in my case - Darky's 9.2).
They didn't ask her anything at the service centre so I/we got lucky with that, and even better - I formatted the internal SD card before flashing so even if the phone isn't hard bricked there won't be any evidence of software modifications (because I rooted the phone to backup everything with TB and to be able to put it in download mode via ADB).
Next week I'll report what happened and if I finally managed to flash a custom ROM (if not, expect a new thread: "Can't believe I bricked my Galaxy S... again!")
hey so i have a Samsung captivate and i just installed continuum v5.5 but every time to turn off my phone all my apps get erased. what can i do about that?
You flash the rom from cwm 2.5? That's my guess...
Try reflashing from where there. With talon kernel that has cwm 3.
studacris said:
You flash the rom from cwm 2.5? That's my guess...
Try reflashing from where there. With talon kernel that has cwm 3.
Click to expand...
Click to collapse
im sorry but im really new to this and i have no idea what that means. All i have one is install the new package and now when i turn off my phone all my apps that i downloaded from the market get erased.
What you were on before you flashed that?
Anyway...from where you are now just boot into recovery
Wipe data/factory reset
Wipe cache
Go into advanced and wipe dalvik cache
Then reflash the rom.
umm for some reason i cant get into recovery mode.........haha any tips on that first
Turn off the phone. Hold volume up and power...that should do it
The extended power menu while it's on...
Or adb...
I have been trying those. none work, all that show up is a white screen that have AT&t and that says world phone. what should i do?
wait up!! AT&T screen?? FOUND THE PROBLEM!!!!!! although i have no idea how you have been able to boot at all... you still have stock eclair/froyo bootloaders. thats a gingerbread rom requiring updated bootloaders..so how it even got into the os is confusing me?
use this:http://forum.xda-developers.com/showthread.php?t=995143
then take a few days and READ!!! you skipped a HUGE step.
Im so confused now. it just stopped working? when i turn on my phone all that shows up is the AT&T world globe thingy and i cant get farther then that. I tired clicking the power and volume buttons but im just stick on the globe thing. is my phone like broken now??
connerpeters said:
Im so confused now. it just stopped working? when i turn on my phone all that shows up is the AT&T world globe thingy and i cant get farther then that. I tired clicking the power and volume buttons but im just stick on the globe thing. is my phone like broken now??
Click to expand...
Click to collapse
no. if it comes on its not broken.
what you need to do is pull the battery...and leave it off. come back to the forums and after you have spent several hours READING up on what exactly you are doing to your phone THEN you will have the knowledge to fix your phone.
this **** shouldnt be taken so lightly if you have literally no idea what you are doing.
yaaaaa i think im going to be done with all the rooting thing in till ive learned more about it. But is their a way to get it back to the way that i bought it.?
Yeah you just put it into download mode and use odin one click
Sent from my SAMSUNG-SGH-I897 using XDA App
This is a perfect example of why I ask that everyone to spend at least a day learning about what they are doing before doing it. Flashing a Rom to your device has some very major side effects if even one step is done wrong.
I tried to put it in download mode. it doesn't work, my phone will turn on and off but will just sit in the start up screen but thats all that it will do?
You will need a jig to force download mode.
Go to mobiletechvideos.com he has a video on how to make one actually heres the link to that video:http://www.youtube.com/watch?v=Rdn5GoRjhn0... if you can't get yours to work or think it might be to difficult after watching the video he also sells them pre made for under 10 us dollars.
There are also quite a lot of useful videos for beginners to watch and learn about what you're doing.http://mobiletechvideos.com/blog/?page_id=31 that whole page is worth a look...
so theirs no other way to get the phone back to normal? If their isn't anther way to get it back to normal then can i just call AT&T to send me anther phone because this phone is only 3 days old??
thats what all of my posts have been trying to do. get you to normal.
especially the ones WITH LINKS!!
yaa ik, sorry what i was trying to say was that is their any other ways to get the phone into download mode that doesn't take making that JIG?
with phone off try holding both volumes and inserting the usb cable thats connected to your pc.
or take out the battery, plug it in and hold the volume buttons, then with the buttons still held indert the battery.
if those dont work the jig will. its easy to make...or if you cant manage its cheap to buy...
what is it with people so resistant to trying to make/buy a jig? both ways its under 10 bucks, and that beats the hell out of not having a phone, and the frustration of trying everything else before you get around to a jig. make/buy one now you will have it for future use. its never not handy to have. i made one before i flashed anything so i would have an out if it went bad.
Okay well thanks to everyone who helped, im going to try to make the jig thingy but if i can't make that then im just going to throw it against a wall and use the insurance to get a new one. thanks though
Hello,
I haven't used my Cappy in a few weeks since I upgraded to the Infuse, so I decided I would let someone use it instead of letting it waste away in my desk. I had a MIUI Rom loaded when I was using it, but it was outdated and I wanted to clear out everything so I went to load the newest rom, but my power button wasnt working to wake up the screen. I thought this was a software issue because nothing physical had happened to the phone as far as I know. I was able to get it loaded through Rom Manager, but it was still having issues. I tried loading a different kernal thinking that might help, but it didnt.
I decided to cut my losses, go back to stock and see what I can do with warranty since its a relatively recently replaced phone. After dealing with getting drivers loaded on my Win7x64 machine which I never had any issues with before, I tried using ODINs 1click, but it would reboot my phone and just go through the normal boot process. I tried again, same results. Tried the "hold volume buttons and plug in usb cable" method that has worked in the past to get into download mode, but it would just reboot and reboot until I let go and then sit at the battery charging screen. It went into revocery one time, but since my power button doesnt work, there wasnt anything I could do. I tried several methods of getting into download mode, nothing worked.
Im headed to Radio Shack to pick up whats needed to make a jig, but I dont have high hopes of that working out. I am able to boot the phone and it works, at least until the screen timesout. Will a jig work or is something else wrong with it?
Thanks
adamofthestoffels said:
Hello,
I haven't used my Cappy in a few weeks since I upgraded to the Infuse, so I decided I would let someone use it instead of letting it waste away in my desk. I had a MIUI Rom loaded when I was using it, but it was outdated and I wanted to clear out everything so I went to load the newest rom, but my power button wasnt working to wake up the screen. I thought this was a software issue because nothing physical had happened to the phone as far as I know. I was able to get it loaded through Rom Manager, but it was still having issues. I tried loading a different kernal thinking that might help, but it didnt.
I decided to cut my losses, go back to stock and see what I can do with warranty since its a relatively recently replaced phone. After dealing with getting drivers loaded on my Win7x64 machine which I never had any issues with before, I tried using ODINs 1click, but it would reboot my phone and just go through the normal boot process. I tried again, same results. Tried the "hold volume buttons and plug in usb cable" method that has worked in the past to get into download mode, but it would just reboot and reboot until I let go and then sit at the battery charging screen. It went into revocery one time, but since my power button doesnt work, there wasnt anything I could do. I tried several methods of getting into download mode, nothing worked.
Im headed to Radio Shack to pick up whats needed to make a jig, but I dont have high hopes of that working out. I am able to boot the phone and it works, at least until the screen timesout. Will a jig work or is something else wrong with it?
Thanks
Click to expand...
Click to collapse
dont think taht the software is the issue..but still cant be sure as teh phone is not in my hand..
so anyways u r gettin the stuff to make the jig..so after taht flash any new gb rom with gb bootloaders..and still ur power button doesnt work then its hardware issue for sure..
but thats a small issue...if u know how to open the phone..then open the phone and check the connector soldering near the power button..
but if u cant do that by urself..then give it to a pro.and u r done..shdnt cost u much
You have to drop the battery out and replace it in order to use the 3 buttons on some builds, especially earlier builds.
looking for a little help guys, not sure what has happened but i have just literally (in the last 30 minutes) installed rom manager, on running the software for the first time i got the run at your own risk message that comes up the first time and then it went to the menu...... and then the phone shut down and now wont turn on, doesnt register when i plug it in to the laptop or even when the charger is plugged in. please guys need some suggestions here as to how to make this brick work again!!!
many thanks
having tried several different ways to resolve this (pressing and holding home, vol down and pwr whilest inserting the battery being one of them), ive come to the conclusion that there is no coming back from whatever rom manager has done to my phone. thankfully the phone is still within warranty as its less than 3 months old so heres hoping that they will fix the damn thing!!!
Rom manager is a tricky app because it is known for bricking phones often.
Seems like your phone is dead.
Most user with similar prob like you had to bring the phone to the service.
http://forum.xda-developers.com/showthread.php?t=1456946
As you are on warranty bring it there and wait till it is repaired.
Good luck.
Next time better do not work with rom manager.
thanks, yeah its weird cause when i had it on my x10 mini pro i had no issues - but clearly not the case here, oh well live n learn!!!
just as a sort of fyi i took the phone to my local t-mobile store here in liverpool and the guy behind the counter couldnt have been more helpfull, took the phone and arranged for it to be sent back to samsung for repair, even tried himself to make it work but to no avail. was most impressed with his 'can do' attitude and its not often that something like that happens!!!