Database Develop

Update: Can't believe my Galaxy S is OK

I'm on Darky's ROM since 9.2 and I've been flashing different stuff with 100% success rate... So far.
My girlfriend also bought a Galaxy S (the I9000, just for info) and me, considering myself a "veteran flasher" (but in real life, still being a tutorial-following guide monkey) told her "Hey, you know what - I can make your phone ten times better, just give it to me overnight".
So I prepared the phone... factory reset, etc. The 3-button combo didn't work (hmm, strange) but I looked around for a solution anyway - found one involving Odin, ADB and updating the bootloader, but since a lot of people bricked their devices this way, I skipped it.
I got the phone to boot into download mode via ADB and then started the guide to instal Darky's Ressurection Edition. Connected to Odin, the phone was recognized and added, then I started it and Odin spat out an ERROR message, then the phone was stuck at the "black screen of death" (a phone and a PC connecting).
So... why the hell did this happen?
I've already flashed my own Galaxy S so I've done this maybe even twice... got drivers, Odin, everything! What went wrong and can I even fix this or I gotta buy a new phone?

you can probably use a jig to get the phone back to download mode.
buy one on ebay or make one yourself. theres plenty of guides online for that.
as for odin having an error im thinking you might have a corrupt file? try downloading it again.

can you go into recovery mode or any 3 button won't work?

But why did you just dont installed the 3 button method which gives you the change to flash other roms e.g.
Yes you risk to brick but you also risk but in my mind much bigger to brick your phone without 3 button so if something went wrong you have the change to go with the 3 buttons to the recovery menu...
Sent from my GT-I9000 using XDA App

Try getting the battery out for 1-2 seconds, put it back in and then try getting into download mode manually by holding first volume down+home and then also the power button.
If you can get into download mode, which is something I've found not to be pretty easy to erase, as it's independant from boot settings and files, all is still OK.

Yeah, I'll be out in the morning to buy the mats for a JIG, found a pretty easy guide how to make one, with pictures and everything.
The files being corrupt is something I didn't even think about, I'll re-download them if/when I manage to get the phone working.
Battery pull didn't do the trick, left it out of the phone for 4 hours, no dice.
After all, the phone is still under warranty and was recently 2.1 untill my gf updated it. Maybe I can tell that it's her fault, messing up Kies update or what? Then I'll get a free service/replacement, but I'll need a solid excuse to tell them. Any ideas? (yeah I know I'm an awful person but I can't afford a second Galaxy S, and the thought of giving her *my precious* because of my stupidity is just as awful)

rolfmao you made my day bro, my gf just bought a SGS as well but she saw me almost crying with the bricks i created, so as soon as i asked her if i could update her phone
she almost kicked me in the nutsack.
building a jig is pretty easy, you just need to practice touching the correct pins and you will be good to go.
as for the odin, it happends....i bricked my phone so many times
i just forced download mode and then reflashed with THE SAME FILES and it worked
my guess is that the connection is interrupted or something...causing it to abort or fail

FYI: Bricking means turning it to a brick, you can't revert from a "bricking"... Bad flash, ok! Black screen, ok! Brick, hum... if you can "unbrick", well, that's not bricking my friend!
All this to say the SGS is ALMOST unbrickable! With Jig, download mode, ADB, etc, there's so many way you can undo/redo things right!
You can say a lot of thing about the SGS, but the thing is made for developpers and flashers!

dikime said:
Yeah, I'll be out in the morning to buy the mats for a JIG, found a pretty easy guide how to make one, with pictures and everything.
The files being corrupt is something I didn't even think about, I'll re-download them if/when I manage to get the phone working.
Battery pull didn't do the trick, left it out of the phone for 4 hours, no dice.
After all, the phone is still under warranty and was recently 2.1 untill my gf updated it. Maybe I can tell that it's her fault, messing up Kies update or what? Then I'll get a free service/replacement, but I'll need a solid excuse to tell them. Any ideas? (yeah I know I'm an awful person but I can't afford a second Galaxy S, and the thought of giving her *my precious* because of my stupidity is just as awful)
Click to expand...
Click to collapse
Build a jig and do it yourself. Then if you run into trouble in the future - hey! you have a jig, no problem. Warranty situation is a bit iffy, sometimes they see that you screwed it up yourself....

t1mman said:
FYI: Bricking means turning it to a brick, you can't revert from a "bricking"... Bad flash, ok! Black screen, ok! Brick, hum... if you can "unbrick", well, that's not bricking my friend!
All this to say the SGS is ALMOST unbrickable! With Jig, download mode, ADB, etc, there's so many way you can undo/redo things right!
You can say a lot of thing about the SGS, but the thing is made for developpers and flashers!
Click to expand...
Click to collapse
Yeah, I know, but I read in another thread that if I get this screen AND can't get into download mode then I'm toast. That's why I used the word brick.
I decided I'll send her return the phone, equipped with her cutest and n00biest face so that they won't even think that there's a real idiot involved (me). And if they don't fall for that, I'll build a jig and try myself.

THIS IS WHY I HAVE NO GIRLFRIEND!!!
nah j/k!
But man... I didn't think you could actually brick the SGS. I mean, I always screw my rom up somehow, but the 3 button combos always work... Guess I'm just lucky... I'll try to be more careful from now on lol.
You bricking your SGS has taught me a valuable lesson! So thanks for that ^^

Sinotek said:
THIS IS WHY I HAVE NO GIRLFRIEND!!!
nah j/k!
But man... I didn't think you could actually brick the SGS. I mean, I always screw my rom up somehow, but the 3 button combos always work... Guess I'm just lucky... I'll try to be more careful from now on lol.
You bricking your SGS has taught me a valuable lesson! So thanks for that ^^
Click to expand...
Click to collapse
LOL, np
Anyway, I just sent her to return the phone, maybe it's a common problem because the guy there didn't even listen to her explaining the crude story I made her tell ("PC froze and then rebooted itself while updating" - yeah right!).
They said it'll be ready next week (hopefully).
This also thought me a lesson - maybe even two.
1) Never try crazy stuff on a Galaxy S without 3 button combo working properly.
2) Always have a JIG ready for use
When she gets it back next week I'll see if the 3BC works and if it does - yeah, I'll try to flash a custom ROM again

Thanks for this highly amusing thread lol the moral is.....don't mess with the womans phone if you want to live AND love
GTi 9000 insanity007/insane glitch

dikime said:
I decided I'll send her return the phone, equipped with her cutest and n00biest face so that they won't even think that there's a real idiot involved (me). And if they don't fall for that, I'll build a jig and try myself.
Click to expand...
Click to collapse
Best I've heard all day
But I must ask - how the ... did you manage to talk her into returning the phone herself...?? If that would have been me screwing up my gf's phone, she wouldn't let me in the house until I had fixed the darn thing myself.

I gave her mine - already heavily tweaked and loaded it with games like Plants vs. Zombies and Let's Create! : Pottery (she just loves that game). Plus I equipped MY cutest and n00biest face when I showed up to tell her the *cough* results.

This made my day. Apparently I thought only girls can put on a cute face and disarm anyone. LOL!
Regarding the brick, what I did was to repeatedly tried doing the 3BC then held all of it until the brick icon goes to download mode. Held it for 5minutes. No jig needed! If you keep it held down for some time, the phone resets itself. MAKE SURE THAT YOUR SGS IS CONNECTED VIA USB!
Good luck!
Sent using this XDA App thing from my awesome SGS

i think this is why all flash posts say make sure 3 button combo is working before you start... but I have had to use a jig to get mine back from the brink/brick once, almost made me cry as i needed my phone in 2 hours to meet up with friends

Oh yea... you will have to let us know what they said when she took it back. I am curious if they ask questions about how it got there and if they believed her... don't want to make things difficult in there but I know some companies who have products that are highly customisable (if "hacked like this") are suspicious of most software related problems

But getting the soft-bricked phone back to a new state with a new ROM would have been a great gift while returning the phone!
Dont u think so?

The whole idea was to get rid of the stock firmware and flash something epic ( in my case - Darky's 9.2).
They didn't ask her anything at the service centre so I/we got lucky with that, and even better - I formatted the internal SD card before flashing so even if the phone isn't hard bricked there won't be any evidence of software modifications (because I rooted the phone to backup everything with TB and to be able to put it in download mode via ADB).
Next week I'll report what happened and if I finally managed to flash a custom ROM (if not, expect a new thread: "Can't believe I bricked my Galaxy S... again!")

Can't get into recovery/dload mode Phone boots to white At&t screen makes few sounds

Can't get into recovery/dload mode Phone boots to white At&t screen makes few sounds
I have recently messed up my Captivate when I was trying to flash a ROM. My phone goes up to the white At&t sign and then makes a few sounds and stops. It also goes to the charging screen when plugged in the cpu when off. I have tried countless ways to get it to go into dl mode or even recovery mode. Ive tried: ADB vol up and down plus power with usb plugged in/battery put in, vol down usb plugged in/battery put in, vol up usb plugged in/battery put in, just vol up and down usb plugged in/battery put in, and nothing seems to be working. WITHOUT someone tellin me to use a jig can ANYBODY please help me find a way to do this. I have even pressed menu and volume down while the phone was in off charging state with green bar loading and the cpu made a sound and cpu said unrecognized device...from there I have tried to root my phone hoping it goes into recovery mod(which ive done to fix my phone before) also from there i have tried odin but no recognizance and I also have tried adb reboot download and adb reboot recovery. NOTHING WORKS...someone please HELP ME!
thanks in advance

What rom were you trying to flash?

why SO resistant to someone telling you to make/buy a jig? its a very easy thing to make and it will solve your no download mode issue in seconds. if nothing else will get you in download mode a jig will for sure (unless your usb port is broken) you can try and exhaust all other solutions but after you've ripped all your hair out build a jig.
its like trying to dig a ditch with a garden spade when you have access to a back hoe

Good point
stud u really make a goop point about it being easier to buy a jig than to pull ur hair out. Which if this kid really was pulling his hair out he shouldn't have been doing this at all. But, I am also having this same problem. I was using a CM7 build and it worked great until i tried to install the gapps. then it went crazy. It rebooted itself and went through the Cyanogen Mod first screen then would get stuck on the CM7 blue android on skateboard bootscreen. If I touched the screen at the bottom right it would vibrate for some reason. Shortly after realizing I needed a jig for it I decide to buy a new one cause at the time I didnt know if I could properly make one. So I've kept my first captivate still trying to find a non-jig method. I recently taught myself begginers adb on Windows XP OS but I am very much a noob except for rooting and flashing. Any help of yours would be great anytime. Thanks,
Matt

gujuplaya111 said:
NOTHING WORKS...someone please HELP ME!
thanks in advance
Click to expand...
Click to collapse
Shows that youve been a member since Dec-2010 so Im assuming that you really did try everything because you have read and read and read (riiiiiiight!?) and without telling us whether you tried to flash a Froyo or Gingerbread ROM I'd sugguest that you buy a JIG. Its really the best solution and the less time consuming if you cant think of anything else to try. You can order one or make your own...literally took about 30 minutes for me to get my phone to a place where i can work with it....a trip to the radioshack and making the JIG and back home.
If you are making requests on specifically NOT to tell you to do it a certain way then you may have to accept that you might have to solve this problem on your own, especially if you said that you tried everything except the one thing that you cant do (which is what we might suggest) and probably will fix your situation.

So i re-read after making my first post to this. I've bought my 5th Cap. now and have quite a bit more knowledge than before. So my question is. If I've completely bricked my 3rd cap... No battery charge screen and all will a jig still work for me to get into download? I was tryin to come back from cm7 but something went wrong.... I really don't need the extra phone but it would be nice to have my back up
Sent from my SGS Captivate on Cog. 5 v2 using XDA Premium App

dm63755 said:
So i re-read after making my first post to this. I've bought my 5th Cap. now and have quite a bit more knowledge than before. So my question is. If I've completely bricked my 3rd cap... No battery charge screen and all will a jig still work for me to get into download? I was tryin to come back from cm7 but something went wrong.... I really don't need the extra phone but it would be nice to have my back up
Sent from my SGS Captivate on Cog. 5 v2 using XDA Premium App
Click to expand...
Click to collapse
If the screen doesnt turn on at all and there is no charge screen or recognition at all of usb than it is more likely then not hard bricked.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.

Thanks xijar then i will for sure purchase a jig. Worth a try anyway.
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] PROPERLY BRICkEd SAMSUNG GALAXY S I9000's ONLY - (no screen response)

hi iv had a serious journey with my sgs i9000 here's how it goes:
i had it on 2.2 and then upgraded it officially to 2.3.3
not much else happened until i realised i wanted voodoo sound (apparently it was hyped to be awesome....its not that great) and neither is the ext4 file system 2.3.3 seems to be just as fast...dont know if it was a major problem on 2.2 but it aint really on 2.3.3
so i flashed voodoo on 2.3.3 from some website ... downloaded the app for the sound as the kernel didnt support that...
then i was using it and played around with the settings in clock work manager and i mounted and unmounted sd/card i dont think it made much difference but i thought i'd mention it ... the reason i did this is because when i tried to load a rom it wouldnt find all my sd card files beyond like the first 5 folders so i thought i'd give it a kick start....
then what happened is the phone just went off and i couldnt get it back on.... little did i know this was soft brick... i didnt know why....
i got the computer screen with the phone and exclamation mark.... i got into download mode a few times....
NOW .... i cant get it to turn on AT ALL using any combo buttons....
i think the nail in the coffin was flashing it with the "one-click odin" which was for the captivate but it said i could use it on the i9000 too.... which blatently screwed up the device....
anyway iv ordered a jig device... if this gets me into download mode ....what am i supposed to do...?
also is there anything i can do to get it into download mode now ? (bearing in mind iv done all the combo's ... some people say leave the battery out for a couple of minutes or half an hour....)
i think the bootloader is screwed up because it doesnt switch on....
even after i did a clean install of 2.3.3 with the pda phone and csc roms... it still just randomly switched off after 2/3 minutes of boot time....
what do i do now ?
samsung repair centre said they couldnt do anything and i'd have to send it back to samsung.... is it that bad?

Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..

yeah i guess i was vague on the combo thing...
i've tried:
a) holding power, menu and volume down while sliding battery in (no usb cable in )
b) same as above with usb cable in
c)just menu and volume down buttons while i put battery in
d) both volume buttons and cable in
e)both volume buttons and battery in
.... the reason for d and e is because when i flashed it with the one click odin installer thing.. it restarted and showed a a t&t screen so i think its flashed the software with a samsung capacitive rom....so in theory i need to use those buttons ? not sure .... yet more questions....
i just hope this jig thing works ... btw do i have to pay sammy is my phone is under warranty?
how do i reflash the bootloader so it works properly? is that even the problem? do i need to do that? which pit file do i use ? some people say 512.... some say thats outdated and the new pit file is the thing to use .. ?
Talon26 said:
Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..
Click to expand...
Click to collapse

ok now iv got it to turn on quite regularly .... but it keeps cycling (bootlooping) the at&t logo screen .... cant get into download mode or recovery mode.... just keeps boot looping.... oh and when i plug in the usb cable it just turns off.... its like i cant start it up with a usb in the phone...
update: been reading around and if anyone has this problem.... it looks like you might be hard bricked and apparently this cant be resolved via jig device..... dammit ...i'll still try and update the post... peace

So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.

Talon26 said:
So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.
Click to expand...
Click to collapse
jig arrived today! .... i plugged it in ..... NOTHING ..... (read on theres more to the story!!!)
so i put it in nothing happened...... i thought maybe the jig device was not working so i tried it in the i9100 (s2) .... WORKED ...!
im really stubborn so i needed to make mine work too..... i read in a review of the jig device that someone bought one and it hadnt worked .... i hadnt ruled that out
anyway all day i just kept trying to jump start it by putting in the wall charger in and out ... i usually get some reponse from that....nothing apart from a second of something like a loading circle......
anyway then i left it on charge for an hour ....maybe the battery was dead and then tried again ....
(btw i was getting no response at all at this stage, not even the at&t thing ...)
so it was pure black screening me.....
then i got home from work and thought let me exchange the battery and see what happens....
i changed the battery and put the jig device in ...... VOILA !!! download mode....
all is well so far i've flashed with 2.3.3 pda,phone and csc files and checked repartition... i haven't messed with the bootloader option
seems to be working ok....also gave it a restart too ... last time it got to this point but it didnt turn back on after a restart ....
in conclusion .... charge battery fully externally (putting the power in the phone in this state was not charging it)
then with a full battery put jig in .... if that doesnt work you phone might be seriously bricked.... bravo to whoever dreamt up the jig device

Glad to hear the great news!

Nice
Thanks for this useful info

[Q] another bricked captivate

i just went thru a problem with a broken power button. long story short i claimed my warranty and got a refurb. the refurb had 2.2 on it. like a jerk i thought it would be fine to use this guide ( https://docs.google.com/document/pub?id=1ItSONRa9nzI7MKeKqwIdHCTRA3RRiOM_6LcJGnK4p6Y ) just like i did with my previous phone to get miui back on my phone. i had to downgrade to 2.1 on my old phone but for some reason i thought it would be fine to use the 'safe froyo base' with my already froyo phone...
anyways i got as far as odin saying it was setting partition and it would go any further. no option but to unplug and try again. before trying i tried to boot and take a look at kies. the phone wouldnt boot. just a black screen. so.. i went ahead and tried odin again since i could still get into download mode. it still hung at the same spot. pulled the plug again and put it into download mode and got the great idea of using 1-click to go back to 2.1 stock. then it hung after, i think the 3rd message that it spits out in the log. cant remember what it said but it was a normal msg. so i pulled the plug and tried to put it into download mode again. NO LUCK. and still doesnt boot.
SO, i have a non-booting, non-download mode, non-recovery mode, no signs of life captivate...
is it a refurbished turd or is there hope with a jig or something else?
i know, long story short

those instructions were for i9000 not captivate...
odin sometimes gets stuck on set partition and i wipes the params.lfs partition where the download mode image is stored.
ill bet you 100 bucks if you restart odin. take out your battery, put back in, hold both volume buttons and plug in usb, THE SCREEN WILL NOT come on, BUT odin WILL turn YELLOW in the first box and windows will beep that it found the device.
Odin will flash with a black screen. when the flash starts, you will see a blue bar on the black screen.
use the one click stock roms in the XDA CAPTIVATE development section.
use XDA. period.

so you're saying use the same method again? or use an odin 1-click stock. 2.1, 2.2, or does it even matter? cuz im pretty sure in my rage of panic i tried both one click and full another time and nothing happened. ive got nothing to lose by trying again tho. thanks for the reply.
edit: just tried what you said with the one click i have and no go. ran odin as administrator. dont have time til after work for the full method or a different one click. but i will definatley try.

FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.

befreewv said:
FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.
Click to expand...
Click to collapse
thanks for the reply. im gonna give it a few more tries before attempting the jig. my power has been out for the last 11 hours so i havent been able to use my pc... or anything really. lost all my food in refrigerator and freezer too .
im gonna mess with this thing a bit more to see if i can make a pearl out of swine poop.

maybe someone can answer me this:
considering what i did to get the phone into this state, if i try to exchange it and tell at&t that i just powered off and it simpy wouldnt power back on is there any way for them tell if it was because of what i did?

anyone? still searching and trying to get dl mode or at least my pc/odin to recognize the device. nothing has worked yet. im downloading sdk now to try adb. i have a feeling that if adb doesnt work then AdamOutler will be $30 richer . and i have an even bigger feeling that adb will not work.

nawlage, PM sent.

4-2ndtwin said:
nawlage, PM sent.
Click to expand...
Click to collapse
thanks, just read it. the thing is, the phone has no signs of life. pbl or sbl seems to be borked but not possitive. ive heard that what i did shouldnt brick it like it has been bricked.
just tried using adb. couldnt even get to it after downloading sdk. there was a read me where adb normally is and said it was moved in the version i have. i tried to install it and it just said nothing was done. could create the directory. i gotta go to work now so i cant try anything else til i get home.

looks like im gonna try for another warranty claim on the grounds that i was putting my saved data from my old phone onto my replacement with kies when the power went out and my phone froze. pulled battery and wouldnt turn back on. if im denied then ill prolly pay for the unbrickable mod. might get the mod even if i get the warranty refurb. seems like a good investment. ill post the results. thanks to those who gave ideas.
EDIT 11/25: i ended up telling them that it worked fine when i went to bed and woke up 4 hours later and it was off and wouldnt turn on. the rep tried all the things i already tried while i snickered to myself and he said 'yeah its dead'. i got another refurb stock uckb2.

[Q] I messed up. Can get into download mode that's all..

I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.

Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975

akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.

Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!

sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium

akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.

Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD

You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1

Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
 @Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).

Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD

Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.

I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....

rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.

only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:

rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4

yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.

rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..

that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....

rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?

I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.