I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
Hi My Friends
I'm A Beginner In XDA
I Downloaded This ROM From HTC Web Site Support
Link : http://www.htc.com/www/SupportDownload.aspx?p_id=13&cat=2&dl_id=21
THis is an Original ROM From HTC (WM6.1)
I Tryed to Install It but I Have a Problem
When I Open The Install File and Continue The Parts Of Install And Then I'll See The Two Progress Bars On My PC & PDA
It's Go TO 1% percent and then Disconnect And After An Automatic Soft Reset I See The Previous Windows .
The Error Message That I Saw Is In The Attachment Picture.
The First Picture is The Finished Message
The Second Picture is My Upgrade Version From Ver To Ver !!
Please Help Me.
Thanks
Best Regards
MF2FX
STOP NOW
What phone are you using
What version of windows xp or vista
hi guys... i was updating my rom as usual, but during update "image file corrupted" error occured and my p3600 has died. i tried some suggestions from the forum, i tried camera+power+soft reset combination and after that updating the rom again but i stops at 1%. So i tried mtty.exe but it says "cannot open USB port". PLEASE PLEASE HELP ME ... (i use Windows XP SP3)
please guys... there're 220.000 active members here. i'm sure somebody knows the solution for my problem...
try using official rom from HTC website
go to the bootloder screen and then try using official rom from HTC website
best
nat
I have never been able to load images via the USB connection. I just take a memory card, copy the rom image to the root and change the name to RUU_signed.nbh hardboot and it loads. And I keep a original HTC rom to fall back to.
I am having trouble installing Windows Mobile 6.5 on a HTC Touch HD.
I have extracted all the files to a folder and then I have connected my Touch To the computer and have activated
active-sync. I have then opened up the PDA Phone Rom Update Utility and followed the instructions. The HTC Touch HD gets stuck on 0% and the PDA Phone Rom Update Utility displays an error 262-the update utility has encountered Communication problems with the device. how can i resolve this problem?
Urgent reply would be appreciate
Babar
First SEARCH and then READ, and please don't start 2 new separate threads to ask the same question.
Both of these threads of yours will be closed down soon, so go to this thread, read the steps and post any further questions you may have in that thread. There is no need to spam the forum with these questions.
As above thread closed
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Surely this phone is out of Warranty
hd2person said:
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Click to expand...
Click to collapse
You're out of warranty right?
So why not just use HardSPL?
Regards,
Tigermoto.
Same problem with Vista and Seven, even with the drivers that should work.
My solution is using an old backup notebook with XP.
Please post further queries/responses regarding flashing, USPL & HSPL here. No need for another thread
Thread closed