Related
Alright there are a few people with the exact same problem as I, vr24 is one that can attest..
Basically I flashed JacHero2.63slowSD and it worked, but after flashing to another hero build (non slow sd), it would get to the screen unlock.. but when i pull that screen down all I see is a loading HTC screen. It never goes beyond that!
I have two seperate SD cards that were retabled, formatted, and set up using parted from cynorecovery 1.3.1. Both of them with full wipes and reflashes with any Hero build give me the same problem. Any non hero build works fine. The only big whoops I can remember is that I downloaded and used swapper even though i had it automatically set up?
I reflashed the phone all the way back to fresh start with dreaimg.nbh to rc29, rerooted, and installed everything properly and still have the same problems.
When trying jachero 2.5 i can at least get a root access request for swapper, which i deny. Anyone have any experience with this?
viccyran said:
Alright there are a few people with the exact same problem as I, vr24 is one that can attest..
Basically I flashed JacHero2.63slowSD and it worked, but after flashing to another hero build (non slow sd), it would get to the screen unlock.. but when i pull that screen down all I see is a loading HTC screen. It never goes beyond that!
I have two seperate SD cards that were retabled, formatted, and set up using parted from cynorecovery 1.3.1. Both of them with full wipes and reflashes with any Hero build give me the same problem. Any non hero build works fine. The only big whoops I can remember is that I downloaded and used swapper even though i had it automatically set up?
I reflashed the phone all the way back to fresh start with dreaimg.nbh to rc29, rerooted, and installed everything properly and still have the same problems.
When trying jachero 2.5 i can at least get a root access request for swapper, which i deny. Anyone have any experience with this?
Click to expand...
Click to collapse
Hit the back button, see if that loads up Rosie.
lukekirstein said:
Hit the back button, see if that loads up Rosie.
Click to expand...
Click to collapse
nope :[ just stuck at htc screen. i can hit end phone call to go to screen lock again, but when i pull it down back to htc screen
I would recommend then reformatting your SD card. Hero stores weird things on the SD card and can sometimes cause problems even between Hero builds (like in your case.) See if that works for you :]
lukekirstein said:
I would recommend then reformatting your SD card. Hero stores weird things on the SD card and can sometimes cause problems even between Hero builds (like in your case.) See if that works for you :]
Click to expand...
Click to collapse
i managed to format using both the panasonic SD tool, and tablerm on parted.. any other trhings i could do?
viccyran said:
Alright there are a few people with the exact same problem as I, vr24 is one that can attest..
Basically I flashed JacHero2.63slowSD and it worked, but after flashing to another hero build (non slow sd), it would get to the screen unlock.. but when i pull that screen down all I see is a loading HTC screen. It never goes beyond that!
I have two seperate SD cards that were retabled, formatted, and set up using parted from cynorecovery 1.3.1. Both of them with full wipes and reflashes with any Hero build give me the same problem. Any non hero build works fine. The only big whoops I can remember is that I downloaded and used swapper even though i had it automatically set up?
I reflashed the phone all the way back to fresh start with dreaimg.nbh to rc29, rerooted, and installed everything properly and still have the same problems.
When trying jachero 2.5 i can at least get a root access request for swapper, which i deny. Anyone have any experience with this?
Click to expand...
Click to collapse
does anyone think thtis could be because of an improper flash or when i activated swapper (even though swapper was automatic on jachero doh), it wrote some corrupted files in some god forsaken place that they cant write to now?
and if so, how would i wipe it clean? i reflashed to rc29 nbut im not sure i f that did the whole job
Hi
I have flashed my G1 T-mobile following the the one-click process in here! i have now root access. The ROM is CyanogenMod-3.9.11.2
After all that i bought a trascend SDcard 8GB class 6, formatted about 600MB to EXT4 using gparted on a live cd, winxp and my G1.
The first thing i noticed is that the phone is slower to load up. it stays about 35secs on the G1 logo and then move to android for a total of about 1min to be ready.
Second thing my free space on internal memory went from 38MB to 68MB, i believe somehow the phone moved the cache on the sdcard...if i install new programs they get installed on the phone memory as far as i understand...however i could be wrong on this. i never started the phone without sdcard since, I'm not sure if this could damage the phone in some way.
I would like to have some feedback on this (the slow boot and memory thing) if someone has experienced a similar situation.
I'm thinking to flash my phone again and move to a stable version of Cyanogen so that i can use app2Sd and Cyanogen updater!!
- how can i flash a new room, considering that i have the latest radio but not HARDspl. (as far as i understand the oneclick method doesn't change the SPL)
I was looking at using again the small oneclick software and flash the Cyanogen 4.0 this time, would that make sense since i have already root access on the phone?
thank you for the help
kirk
update
After installing and unistalling few softwares i found out that all programs are actually on the SDcard however the Mobile uses still the internal memory for the cache. This doesn't bother me for now since i still have about 68MB free. Basically if you install CyanogenMod and you don't have a partitioned SDcard all software get installed on the internal memory however as soon as you put in an partioned card all programs get transfered automatically after the first boot. At least this is what happen to me. Somehow i got what i wanted and because of this i don't need to flash my phone anymore... maybe I'll flash it again when android 2 is out, if i don't have to change spl, image recovery or anythingelse too risky
I used the 1-click method as well, and I just download the latest cyanogen rom, rename it to update, boot into cm-recovery and apply the update.
One more thing, the latest versions of Cyanogen's rom have auto apps2sd built into the rom. It will automatically move all apps to the sd card as long as you have an ext2/ext3/ext4 partition on your sd card.
Your still going to have the same boot time. It's still going to take awhile to boot, just because you have a custom rom doesn't mean it will boot faster. And to load a new rom either rename to update.zip and update or if you have the newest recovery then you can just flash whatever rom without renaming because you can flash any .zip file.
In reading your post I think you said you wanted to use the small 1 click software to download cm4.0 You are done rooting your phone you no longer need to use the 1 click software.
Just copy new rom (cm4.0.4) to sd card
unplug phone from computer
turn off phone
boot into recovery (home and power at the same time)
flash new rom
when you use one root, it flashes cm-recovery 1.4 so there is no need to rename, just put on the root of your sd and flash from recovery
supremeteam256 said:
Your still going to have the same boot time. It's still going to take awhile to boot, just because you have a custom rom doesn't mean it will boot faster. And to load a new rom either rename to update.zip and update or if you have the newest recovery then you can just flash whatever rom without renaming because you can flash any .zip file.
Click to expand...
Click to collapse
Are you aware of any reason for the slow boot after partition of the sdcard??
is it the stock 1GB sdcard?
Cause it has to read from the sd during boot up and it has to run the script for the apps2sd
Fingerlickin said:
is it the stock 1GB sdcard?
Click to expand...
Click to collapse
no is a transcend 8GB class 6.
gridlock32404 said:
Cause it has to read from the sd during boot up and it has to run the script for the apps2sd
Click to expand...
Click to collapse
As far as i know i'm not using app2sd yet. I partitioned my SDcard ONLY after i flashed my phone. however like i said i think the phone is somehow using the ext4 partition for something.
You reckon this would be a normal boot time i mean it takes between 50secs and 1.05 min to be ready. Phone is stable as far as i can tell.
I myself am not concerned with the boot time, the ext4 is another filesystem that it has to read and recongize, you basicly have a little mini computer in your hands so how long does your pc take to load up, there are many files and system checks that it has to go through starting up not to mention all the settings and components it has to turn on
Bottom line, if you want something to boot up quickly than get a basic phone because there is a very good way to speed up a mini computer to do the same
gridlock32404 said:
I myself am not concerned with the boot time, the ext4 is another filesystem that it has to read and recongize, you basicly have a little mini computer in your hands so how long does your pc take to load up, there are many files and system checks that it has to go through starting up not to mention all the settings and components it has to turn on
Bottom line, if you want something to boot up quickly than get a basic phone because there is a very good way to speed up a mini computer to do the same
Click to expand...
Click to collapse
Well i'm aware of all this and i'm not concerned too much about the boot time. I'm only trying to gather information and learn a bit more from other ppl experiences. I come from windows mobile and android OS is all new world for me.
have you a similar configuration to my G1? Do you run app2sd? is yor boot time similar to mine??
maybeoneday said:
Just copy new rom (cm4.0.4) to sd card
unplug phone from computer
turn off phone
boot into recovery (home and power at the same time)
flash new rom
Click to expand...
Click to collapse
Just a quick question for future reference...
do i need to put Cyanogen recovery image on the root of the sd card when i boot into recovery mode?
thank you
Kirk
Why did you root your phone? You have no desire to search to even do one of the most well documented things to your phone in these forums. What you need to do is take a DREAIMG.nbh file and put it in the root of your sdcard (or in no folders), then open up terminal emulator and type su then reboot bootloader once that happens wait for it to flash that image. Then you will have the most pimping room on your phone. Also you have amazing boot times. Everything you want.
david1171 said:
Why did you root your phone? You have no desire to search to even do one of the most well documented things to your phone in these forums. What you need to do is take a DREAIMG.nbh file and put it in the root of your sdcard (or in no folders), then open up terminal emulator and type su then reboot bootloader once that happens wait for it to flash that image. Then you will have the most pimping room on your phone. Also you have amazing boot times. Everything you want.
Click to expand...
Click to collapse
Hi David
I had specific reason to root 2 different G1 and this is not to play with it or try a new ROM or even experiment new things. I may change my ROM again when a major relase is out (i.e. Android 2 if it has something that i need)
Going back to reflashing the phone.
You now suggest me to use DREAIMG.nbh which is actually mentioned on the guide "hoe to downgrade-root-flash your phone" here
....am I missing something here?? thank you for taking the time to reply anyway.
..I have read quite a bit on this forum and i decided to use the one-click method (because is the quickest and safiest one). I thought reflashing should be as easy. go in safe mode wipe and reflash it. Anyway for my nature i tend to ask/investigate one thing before go and actually do it. My questions are:
- if i press home power right now, considering that i have nothing on my sdcard would it take me to the safemode screen?
- Consequently do i need to have Cyanogen image revovery together with the ROM on my sd card in order to flash a new version of CyanogenMod?
Thank you
Kirk
you can boot into recovery at any time by pressing home and power when the phone is powered down. it will go into recovery no matter what is on the sdcard.
Also the recovery image you have on your phone does not determine what rom you can flash.
wow... i am at a loss for words...... do you even know why you did any of the things you did? did you even read the release notes for cyan's rom's? ALL OF THE ANSWERS TO YOUR QUESTIONS ARE THERE...
if you have an ext partition on your sd card....it WILL AUTOMATICALLY be used for apps2sd with 80%-90% of the ROM's out there today... ITS IN ALL OF THE ROMS' CHANGE LOGS/RELEASE NOTES
I had specific reason to root 2 different G1 and this is not to play with it or try a new ROM or even experiment new things. I may change my ROM again when a major relase is out (i.e. Android 2 if it has something that i need)
Click to expand...
Click to collapse
if you didnt root to try a new rom or experiment with new things, your better off with the stock firmware...which is why david suggested you flash DREAIMG.nbh
go in safe mode wipe and reflash it
Click to expand...
Click to collapse
going into safemode wont flash anything.... i suggest you search and find out what exactly safemode is, especially since there was a thread only a few threads below yours detailing it.
All you need to flash a new ROM is the rom on your sd card and a working recovery, as well as anything that the ROM your installing has required which are noted in the changelog/release notes....
nothing else is needed on your SD card, except maybe specific partitioning, which will be noted in the ROM's requirements.
I try to help out here as much as i can when i have time (most of my posts are in Q&A helping out people) but it seems as though no one even bothers to look at the actual forums anymore. They just create an account, create a thread, bug people till a simple question is answered, and disappear forever.....
I came to this site simply to get roms, but i stayed because there was so much to learn and i created an account to help out people as well...i did all of my major modifications without asking any questions....all the questions are already answered somewhere...
i understand its hard to go through all the clutter, but it is starting to look as if no one even cares anymore
@B-man007 i am starting to feel like you do, i had my phone rooted and all that good stuff at least a month before i made an account just to download something uploaded to the forum. I wish i could see how many post i have in a ceratin forum bc i imagine at least 450 or 500 of them would be in this one helping people. Its getting to the point where i no longer care to help people and i thought i had a lot of patience. I porbably do but people are sinking to new lows with the questions they ask...
I think I have maybe 5 posts in dev, most of my posts are q&a and general, but then again half of those posts are from hijacking threads. I just got tired of answering the same questions over and over and over
gridlock32404 said:
I think I have maybe 5 posts in dev, most of my posts are q&a and general, but then again half of those posts are from hijacking threads. I just got tired of answering the same questions over and over and over
Click to expand...
Click to collapse
u hijack the hell outa threads. there should some type of entrance exam for xda. like do u know how to search, can u read do u have a brain. i mean god i actually helped a guy who couldnt open the terminal
Hi there Android people.
I am having some issues with running the current Cyanogen *4.2.11.1*.
Phone: G1 Drea100 PVT 32B with stock 1GB SD
using anmon RA 1.5.2 recovery image
-wipe all available in menu.
-created a new partition- FAT32, Ext1 (upgraded to 4), Swap 32MB
-wiped all again.
-repair SD: ext
-flash signed-dream-devphone-userbug-ota-14721
-Once the flash above completed I did not restart, I simply flashed to update-cm-4.2.11.1
-reboot
Once it boots, my home process stops responding if I touch anything. This last for about 15 seconds, after that it seems to responds fine, but the browser and market place seems to auto-close on me from time to time, and I get random phone reboots, after a few reboots my phone simply stops turning on. I have to wait about 10 minutes to get into recovery and try to flash all over again.
I tried fix_permissions in the terminal, no luck.
I did some reading and noticed a lot of people are running different Radio/SPL versions other than stock, I am no super user, so I don't know if any of this effects ROMs, or if I should be flashing either for any sort of benefits I am missing out on? could this be the issue? Current SPL/Radio below:
HSPL10.95.3000
CDLP-4
Radio-2.22.19.261
Any input would be much appreciated.
Thanks,
D3AD PIX3L said:
Hi there Android people.
I am having some issues with running the current Cyanogen *4.2.11.1*.
Phone: G1 Drea100 PVT 32B with stock 1GB SD
using anmon RA 1.5.2 recovery image
-wipe all available in menu.
-created a new partition- FAT32, Ext1 (upgraded to 4), Swap 32MB
-wiped all again.
-repair SD: ext
-flash signed-dream-devphone-userbug-ota-14721
-Once the flash above completed I did not restart, I simply flashed to update-cm-4.2.11.1
-reboot
Once it boots, my home process stops responding if I touch anything. This last for about 15 seconds, after that it seems to responds fine, but the browser and market place seems to auto-close on me from time to time, and I get random phone reboots, after a few reboots my phone simply stops turning on. I have to wait about 10 minutes to get into recovery and try to flash all over again.
I tried fix_permissions in the terminal, no luck.
I did some reading and noticed a lot of people are running different Radio/SPL versions other than stock, I am no super user, so I don't know if any of this effects ROMs, or if I should be flashing either for any sort of benefits I am missing out on? could this be the issue? Current SPL/Radio below:
HSPL10.95.3000
CDLP-4
Radio-2.22.19.261
Any input would be much appreciated.
Thanks,
Click to expand...
Click to collapse
Why did you use "signed-dream-devphone-userbug-ota-14721"
I'm no pro but I used the base image that cyanogen recommends on his wiki page. The DRC83 defanged located here:
http://wiki.cyanogenmod.com/index.php/Latest_version#Defanged_DRC83
staunty said:
Why did you use "signed-dream-devphone-userbug-ota-14721"
I'm no pro but I used the base image that cyanogen recommends on his wiki page. The DRC83 defanged located here:
http://wiki.cyanogenmod.com/index.php/Latest_version#Defanged_DRC83
Click to expand...
Click to collapse
He used that because it is the proper image to use. A defanged file simply means that it has been rendered safe to download with no fear of infection. The link on his site is to the file used by the OP, so no worries there. Also, your radio is good, so do not worry about that either.
I have to ask, because you did not mention part of the process that should be happening. You flash the HTC image, then you do not reboot and flash the CyanogenROM. At this point you reboot. What happens? It should flash the radio, go to an HTC screen, stay for awhile, then reboot itself back to recovery where it gives a message regarding the cache being cleared. At this point you reboot for the actual boot process. Is this not happening for you?
cloverdale said:
He used that because it is the proper image to use. A defanged file simply means that it has been rendered safe to download with no fear of infection. The link on his site is to the file used by the OP, so no worries there. Also, your radio is good, so do not worry about that either.
I have to ask, because you did not mention part of the process that should be happening. You flash the HTC image, then you do not reboot and flash the CyanogenROM. At this point you reboot. What happens? It should flash the radio, go to an HTC screen, stay for awhile, then reboot itself back to recovery where it gives a message regarding the cache being cleared. At this point you reboot for the actual boot process. Is this not happening for you?
Click to expand...
Click to collapse
You are correct- after flashing CM the phone will flash the radio and reboot to the recovery screen where I will reboot again. Sorry for not including that detail.
Home process hanging in the beginning is not a problem, most people have that happenning. Eventhough home screen is shown, Android is still booting up, you just have to wait a little bit for everything to finish up.
Problems with stock apps usually indicate that something went wrong with instalation of the rom (i.e HTC 1.6 rom was not installed properly) so you may want to re-flash that again followed by CM rom of your choice.
Next time you phone reboots itself, try to get a log (there's more on how to do it in Cyan's thread), it's the only way to find out what happens.
Last, but not least, stock 1GB card is not advised for swap/apps2sd because if it's slow speed (it's class 2). Get one that's faster (class 6 preffered) and try that out, it may be the source of your problems after all.
Good luck.
how do i install this Cyanogen on my G1 with 1.6 firmware ?
simple007 said:
how do i install this Cyanogen on my G1 with 1.6 firmware ?
Click to expand...
Click to collapse
http://tinyurl.com/yjuy6u3
But in all seriousness
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
This would work. Please use search, this is such a n00b question.
Did another fresh install, so far no issues.
I will get a log the next time I install to see if I can track down the issue.
Also had time to install Enoch 4.2.11.2 theme. <3 this theme.
I will be heading to Frys today to pick up some cooling fans for the old PC, I will take a look for new mini SD
thank you to everyone that responded.
Just got home from Frys Electronics.
Purchases an A-DATA 8GB Class 6 microSD.
wiping/flashing again.
I am having a hard time learning about the swap file part of all this... I can find guides on how to create a Swap Partition, but not sure how to make it work and/or optimize it.
So I created a 32MB Swap- Previously I read the commands to enable Swap through the terminal- "linux_swap_en=1" I have used this and it does indeed turn on swap, but is there some sort of command to optimize? I believe tweaking the swap files is adjusting the "swappiness"?
The other way I enabled the Swap file was from the spare parts menu- Enabling Compache enabled my Swap file. Does this need adjustment? for size? or any other parameters? Or is this kind of an auto on for Swap?
Sorry I am a total noob, and want to know if I am missing out, I just keep loving this phone more and more.
I will be buying Cyanogen some beer soon ^_^
I've played with swap a long time ago and never quite understood it neither. As of lately, I've been running 10mb hack (in the developement section) and it works great. If you're inclined to get the swap thing going I suggest you read this thread. This will give you an idea of how to enable and tweak swap-related tasks.
Glad to hear that you have original problems taken care of (so far at least).
Good luck.
I think I just may have bricked my phone...
I did all the steps stated in my first post while flashing to 4.2.12.2 and got things going great. Flashed Enoch's Theme 4.2.12.2. Everything was rocking.
Then today, it shut it self off, I rebooted. Got to Enoch load screen then shut off, tried it again, and it won't even get past the G1 splash screen. I have had this happen a few times before, where it would power off randomly and I had to pull the battery, wait like 5 minutes and then get into recovery and clear/flash again. Now I am getting into recovery but after a minute or so it just shuts itself off again.
Can't wipe, Can't flash, cant even get into Cam+power to flash back to previous RC...
Not really sure what to do at this point...
If I do manage to get it running again, I do wonder why its doing this.
I use Cachemate to clear my catche and task killer to kill apps. Could Cachemate be the culprit in this mess, its the only app that I own that uses root? Not sure what else to blame it on other than the G1 one being one big POS and is only good if you can even get a ROM to run on it. I am 5 minutes away from ordering a Nexus.
once again thanks in advance for any input you can provide.
D3AD PIX3L said:
I think I just may have bricked my phone...
I did all the steps stated in my first post while flashing to 4.2.12.2 and got things going great. Flashed Enoch's Theme 4.2.12.2. Everything was rocking.
Then today, it shut it self off, I rebooted. Got to Enoch load screen then shut off, tried it again, and it won't even get past the G1 splash screen. I have had this happen a few times before, where it would power off randomly and I had to pull the battery, wait like 5 minutes and then get into recovery and clear/flash again. Now I am getting into recovery but after a minute or so it just shuts itself off again.
Can't wipe, Can't flash, cant even get into Cam+power to flash back to previous RC...
Not really sure what to do at this point...
If I do manage to get it running again, I do wonder why its doing this.
I use Cachemate to clear my catche and task killer to kill apps. Could Cachemate be the culprit in this mess, its the only app that I own that uses root? Not sure what else to blame it on other than the G1 one being one big POS and is only good if you can even get a ROM to run on it. I am 5 minutes away from ordering a Nexus.
once again thanks in advance for any input you can provide.
Click to expand...
Click to collapse
This sounds like a hardware issue, and not a bricking. Try a new battery, this may fix it, otherwise I am not sure.
cloverdale said:
This sounds like a hardware issue, and not a bricking. Try a new battery, this may fix it, otherwise I am not sure.
Click to expand...
Click to collapse
I will try the other battery I have at home in my other G1 and report back
D3AD PIX3L said:
I will try the other battery I have at home in my other G1 and report back
Click to expand...
Click to collapse
I tried it.
Same issue.
I did noticed that the batter pins were abnormal... One was sticking out more which was normal according to my other G1, the other 2 were shoved down. I tried to mess with the 2 to get them to pop back up to their normal position with no luck.
I am thinking about ordering a replacement.
okay, so tonight I am going to take the G1 apart and see if I can get those pins straightened out. Not sure if it will help, but its better than declaring it a paper weight.
will post the outcome.
Just out of curiousity (and I don't exactly know where I'm going with this) will your phone turn on and stay on if you plug it in (usb or charger)?
borodin1 said:
Just out of curiousity (and I don't exactly know where I'm going with this) will your phone turn on and stay on if you plug it in (usb or charger)?
Click to expand...
Click to collapse
It does not.
I think i will take both phones apart and swap out the screen since that is why I don't use the one. I watched a visual walkthrough seems easy enough
Has anyone disassembled their G1 and reassembled successfully? any tips?
Started to take apart the non-cracked bricked G1.
Once I removed the motherboard and started on the next step, I realized how bad it would be to end up getting the parts swapped and then have it not work... Put it back together and loaded up the latest Cyanogen on my working cracked G1.
*shrugs* it will do for now.
Waiting till the end of next month to order my Nexus 1, then I will have fun ripping apart both G1's and hopefully end up with one great looking, fully functional G1 to possibly sell or keep as an extra phone...
thanks to all who replied!
Ok so I have totally messed my brand new device, this is second day I have had it. I got it yesterday and first thing I did was install DeeperBlues HC v4 on my eMMC. It was easy. I had to use Autonooter first. I was on 1.0.1. Well after playing with it all night. I started to not like the functioning of apps on the platform. They were great but was in my opinion, no greater than when it was just rooted. So I decided to bring it back to stock. I accidently placed wrong sd card in it, the one with Autonooter on it. Now when it boots up it says Loading.... then I get the word ANDROID in lower left had side of screen in landscape. I am a noob when it comes to this. Now I flash and mess with my phones rom and themes and kernels all the time kind of a junkie, but this is no walk in the park.
Please can someone help me.
MentalDragon said:
Ok so I have totally messed my brand new device, this is second day I have had it. I got it yesterday and first thing I did was install DeeperBlues HC v4 on my eMMC. It was easy. I had to use Autonooter first. I was on 1.0.1. Well after playing with it all night. I started to not like the functioning of apps on the platform. They were great but was in my opinion, no greater than when it was just rooted. So I decided to bring it back to stock. I accidently placed wrong sd card in it, the one with Autonooter on it. Now when it boots up it says Loading.... then I get the word ANDROID in lower left had side of screen in landscape. I am a noob when it comes to this. Now I flash and mess with my phones rom and themes and kernels all the time kind of a junkie, but this is no walk in the park.
Please can someone help me.
Click to expand...
Click to collapse
I think you rooted your Nook which could be a fine thing. If that's not what you want, getting it back to stock is very easy.
Here's a link: http://nookdevs.com/Flash_back_to_clean_stock_ROM
The tricky part is to get the timing right so that you get the 8 failed boots (that took me a while). If it looks like it's about to boot up up, hold down the power button till it goes off (at least I think that's what I did). If you have adb installed (or install it) you can get around that.
BarryR1 said:
I think you rooted your Nook which could be a fine thing. If that's not what you want, getting it back to stock is very easy.
Here's a link: http://nookdevs.com/Flash_back_to_clean_stock_ROM
The tricky part is to get the timing right so that you get the 8 failed boots (that took me a while). If it looks like it's about to boot up up, hold down the power button till it goes off (at least I think that's what I did). If you have adb installed (or install it) you can get around that.
Click to expand...
Click to collapse
Yeah, but that's not going to work, he installed HC on the internal eMMC the first day he owned it.........
Probably the fix is here: http://forum.xda-developers.com/showthread.php?t=945838
khaytsus said:
Yeah, but that's not going to work, he installed HC on the internal eMMC the first day he owned it.........
Probably the fix is here: http://forum.xda-developers.com/showthread.php?t=945838
Click to expand...
Click to collapse
Is this going to help me. My original firmware was 1.0.1.
Just grab the CWR 1.1 Recovery image from the development forum. Burn that onto an SD Card and reboot. Wipe data boot system cache and flash. done.
Find rootpack in dev section, write that to sd card, add the flashable restore to stock zip from samuelhalffs restore to stock thread in the dev section to your sdcard, boot to sdcard with the rootpack on it, flash the restore to stock zip after formatting system and data. Wala, fixed! All info can be found in my dummies guide to my nook won't boot a few threads down.
Thank you Thank you Thank you. This worked. I now have my Nook back. Thanks.
MentalDragon said:
Thank you Thank you Thank you. This worked. I now have my Nook back. Thanks.
Click to expand...
Click to collapse
Ok still need help. I seem to have installed CWR but now i am watching the Nook Color boot animation looping over and over. I tried to reboot but it is still looping. What do I do again? Do I reinstall sd card? And reflash the rom?
khaytsus said:
Yeah, but that's not going to work, he installed HC on the internal eMMC the first day he owned it.........
Probably the fix is here: http://forum.xda-developers.com/showthread.php?t=945838
Click to expand...
Click to collapse
Oops. My bad. Sorry for the misinformation.
MentalDragon said:
Ok still need help. I seem to have installed CWR but now i am watching the Nook Color boot animation looping over and over. I tried to reboot but it is still looping. What do I do again? Do I reinstall sd card? And reflash the rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=949699
Try this Thread, "Dummies Guide to Fixing 'My Nook Won't Boot'""
This should work and get you back to stock so you can start all over.
Hello everyone,
Firstly what a great website. Thank you. I am a 'noob', I have watched the video, searched the posts etc, However as someone who understands very little technological jargon, I was looking for a step by step, recent, updated guide to rooting the HTC Salsa.
Now don't be fooled...I actually have no idea about rooting...I have only just learned about this from searching internal memory issues. However, I am good and following step by step instructions/videos etc
So, can anyone link me to the correct thread, if it has already been posted or help to guide me?
Thanks in advance
Ruthie
redruthie said:
Hello everyone,
Firstly what a great website. Thank you. I am a 'noob', I have watched the video, searched the posts etc, However as someone who understands very little technological jargon, I was looking for a step by step, recent, updated guide to rooting the HTC Salsa.
Now don't be fooled...I actually have no idea about rooting...I have only just learned about this from searching internal memory issues. However, I am good and following step by step instructions/videos etc
So, can anyone link me to the correct thread, if it has already been posted or help to guide me?
Thanks in advance
Ruthie
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1275410
there are several others..
Now the route for rooting just got easier....its much more easier to flash a new rom.....as it comes with preroot anyway, saving a lot of time and agro!
its a choice thats up to you!
Go here >http://www.wix.com/bigbearevo/salsa for how to create stuff and do stuff to your phone! I compiled it so people could find it easier...
Thank you BBE,
however I'd be lying if I said that I fully understood any of that!!
I am happy to choose whatever is the easier option, although I am not sure which that is. I looked on your website, but I really didn't understand what part I should be following. I could also not see how to join.
So, would it be possible for you advise me again, with one option that is the easiest. I do not know what flashing a ROM is, but am happy to follow instructions.
Thanks for your patience
Ruthie
Lol that's nps
Ok few questions first to help find which route you want to take.
Do you want to Change what your using right now?
I mean by u are using sense stock.
Check in android development for Roms of choice to figure out what u like.
Flashing is the process in which you install a new rom.
I myself am a serial flasher, meaning while I make Roms I constantly flash my phone lol.
What do u want out of rooting?
Are u just going for the increased memory or do u want a change in appearance too?
The options are.
Keep your stock rom, root it and increase memory.
Flash a custom rom, pleanty around now, advantage with this is most things are Inc that u would have to do on stock rom.
To do this also. U may need to su things prior.
Just to start you off.
Turn off phone and pull out battery.
Reinsert battery, hold down volume key and press power with volume key pressed down.
HBOOT will appear. At the top will be alot of numbers etc. I need to see if you have old or new updates.
If u have old u may need to unlock bootloader with updates first. Easy to do.
Fill in this and choose the way u want and I shall help you succeed in your goal.
BB
Wasn't me............ ;-)
Hi BBE
I still don't understand the abbreviations: nps, su etc?
Anyway this is what phone says:
ICON_g PVT SHIP S-ON RL
HBOOT-1.07.0000
MICROP-0558
RADIO-7.51.35.19
Dec 15 2011, 12:57:05
I am ideally looking to increase memory. My phone has been stuck without functioning properly for about 4 weeks now. I am happy to include a new ROM if this also increases my memory, but to be honest I don't really care about changing the image of my phone but am happy to do so if this helps.
I am not really sure what I am looking for in my 'ROM of choice' so there is little point in me looking unless it is really obvious? But perhaps you can guide me?
Thanks again
Ruthie
P.S I am more than happy to get rid of many of vodafones pre-installed applications.
redruthie said:
Hi BBE
I still don't understand the abbreviations: nps, su etc?
Anyway this is what phone says:
ICON_g PVT SHIP S-ON RL
HBOOT-1.07.0000
MICROP-0558
RADIO-7.51.35.19
Dec 15 2011, 12:57:05
I am ideally looking to increase memory. My phone has been stuck without functioning properly for about 4 weeks now. I am happy to include a new ROM if this also increases my memory, but to be honest I don't really care about changing the image of my phone but am happy to do so if this helps.
I am not really sure what I am looking for in my 'ROM of choice' so there is little point in me looking unless it is really obvious? But perhaps you can guide me?
Thanks again
Ruthie
Click to expand...
Click to collapse
nps = no problems
look in rom development section, see threads with[ROM] in it, see pictures and whats included in the roms it self.
personally if you want standard use a sense rom
Options are
Thing rom
Bigbear x series V10
Minds sense 3.5
reason i state this is the rooting part.
All custom roms have root/New SU (Superuser rights app)
This is required to run the increased memory.
NOTE Updating HBOOT?UNLOCKING BOOTLOADER WILL WIPE YOUR ROM CLEAN.
BACK EVERYTHING UP U CAN
You need to update your HBOOT.
Goto HTCDev >http://www.htcdev.com/bootloader
Register (takes a few mins)
plug your phone into the pc and select charge option.
Download these >http://www.mediafire.com/download.php?68k4zzzeamjwswt
extract these in to a new folder on c: called Android
now follow instructions to update your HBOOT.
Ok assuming the HBOOT is now updated via HTCDev
You can follow the rest of the instructions to unlock the bootloader, takes around 15mins or so.
So you got the email with the unlock.bin file.
add that into the Android folder u made with those files in there.
Follow instructions again to begin your unlock.
All Done.
so you have updated the HBOOT and unlock bootloader....
Good now for the next bit.
Installing CWM 5
This is a program installed into the phone itself.
This allows you to do pretty much anything you want.
Main thins are Backup and restore of your device.
Flashing of custom Roms
here is recovery >http://www.mediafire.com/download.php?bumma6im6fu8q4b
this is pretty easy to do.
http://forum.xda-developers.com/showthread.php?t=1438804
this shows how to install the recovery.
Once you have done this, then its upto you if your root it or install a new rom.
...................................................................................................
New Memory
So to increase the memory partition u need to complete the previous task.
Now then.
Tools required for this next task.
Minitool partition wizard >http://www.partitionwizard.com/free-partition-manager.html
SD READER for your pc.
About 30mins of your time.
Ok to start with
Turn off your phone, remove sd and place into the reader and into your pc via USB slot.
Now open up The partition wizard.
Personally id back up your sd right now...just in case.
Now select your sd and create a new partition
You want to create and EXT3 partition and select it as Primary only, apply actions, now it will do its thing, watch as it works.
Now if this has completed the sd may register as bad....don't worry.
Unplug reader and reinsert back to pc, now you should have 2 partitions on your sd EXT3 max 1gb and the rest fat32
this shouldn't have touched your fat32 section but if you didn't follow it right and it got wiped...just copy back your backup onto the sd now.
ok reinsert the sd into your phone and start it up.
now to get access to this new memory...it all depends on what rom you are using.
On stock or stock based rom which have NO APPS2SD.
all roms state if this has it or not. mine dont.
now using a set script you have to flash this in recovery mode to enable the new memory.
For APPS2SD use this >http://www.mediafire.com/download.php?qr5rh2fho1hnbnl
Roms WITHOUT APPS2SD >http://www.mediafire.com/download.php?duigp9ky9796b65
Using the wrong one will cause problems so be very clear what u want.
reboot phone and enjoy new memory.
here are my guides showing the how 2
HTC Unlock >http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides
Install recovery >http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides/recovery
EXT3 Creation > http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides/ext3-creation
ive tried to explain everything i can...any problems PM or email me
cwm
i can't understand how and where i will install the CWM 5??
what is recovery.img and flash_image?
from where i will get recovery.img, flash_image?
what is adb folder?
i am new, please help me .
smondal4u said:
i can't understand how and where i will install the CWM 5??
what is recovery.img and flash_image?
from where i will get recovery.img, flash_image?
what is adb folder?
i am new, please help me .
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1704495
S-off htc salsa
Hi,
I followed your thread and unlocked boot loader of my htc salsa from HTC Dev, and also successfully done with recovery.
but the main target to unlock my phone is to make it root so that i can run vpn application as root on my phone and also get rid of low internal memory issue.
Since my phone is S-On, so my question can i make it root ( I think no), what is the solution to make S-Off. Itsn't there any solution without using XTC Clip (I dnt wanna buy such thing)
Please reply.....
Thanks
Amit
BigBearEvo said:
nps = no problems
look in rom development section, see threads with[ROM] in it, see pictures and whats included in the roms it self.
personally if you want standard use a sense rom
Options are
Thing rom
Bigbear x series V10
Minds sense 3.5
reason i state this is the rooting part.
All custom roms have root/New SU (Superuser rights app)
This is required to run the increased memory.
NOTE Updating HBOOT?UNLOCKING BOOTLOADER WILL WIPE YOUR ROM CLEAN.
BACK EVERYTHING UP U CAN
You need to update your HBOOT.
Goto HTCDev >http://www.htcdev.com/bootloader
Register (takes a few mins)
plug your phone into the pc and select charge option.
Download these >http://www.mediafire.com/download.php?68k4zzzeamjwswt
extract these in to a new folder on c: called Android
now follow instructions to update your HBOOT.
Ok assuming the HBOOT is now updated via HTCDev
You can follow the rest of the instructions to unlock the bootloader, takes around 15mins or so.
So you got the email with the unlock.bin file.
add that into the Android folder u made with those files in there.
Follow instructions again to begin your unlock.
All Done.
so you have updated the HBOOT and unlock bootloader....
Good now for the next bit.
Installing CWM 5
This is a program installed into the phone itself.
This allows you to do pretty much anything you want.
Main thins are Backup and restore of your device.
Flashing of custom Roms
here is recovery >http://www.mediafire.com/download.php?bumma6im6fu8q4b
this is pretty easy to do.
http://forum.xda-developers.com/showthread.php?t=1438804
this shows how to install the recovery.
Once you have done this, then its upto you if your root it or install a new rom.
...................................................................................................
New Memory
So to increase the memory partition u need to complete the previous task.
Now then.
Tools required for this next task.
Minitool partition wizard >http://www.partitionwizard.com/free-partition-manager.html
SD READER for your pc.
About 30mins of your time.
Ok to start with
Turn off your phone, remove sd and place into the reader and into your pc via USB slot.
Now open up The partition wizard.
Personally id back up your sd right now...just in case.
Now select your sd and create a new partition
You want to create and EXT3 partition and select it as Primary only, apply actions, now it will do its thing, watch as it works.
Now if this has completed the sd may register as bad....don't worry.
Unplug reader and reinsert back to pc, now you should have 2 partitions on your sd EXT3 max 1gb and the rest fat32
this shouldn't have touched your fat32 section but if you didn't follow it right and it got wiped...just copy back your backup onto the sd now.
ok reinsert the sd into your phone and start it up.
now to get access to this new memory...it all depends on what rom you are using.
On stock or stock based rom which have NO APPS2SD.
all roms state if this has it or not. mine dont.
now using a set script you have to flash this in recovery mode to enable the new memory.
For APPS2SD use this >http://www.mediafire.com/download.php?qr5rh2fho1hnbnl
Roms WITHOUT APPS2SD >http://www.mediafire.com/download.php?duigp9ky9796b65
Using the wrong one will cause problems so be very clear what u want.
reboot phone and enjoy new memory.
here are my guides showing the how 2
HTC Unlock >http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides
Install recovery >http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides/recovery
EXT3 Creation > http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides/ext3-creation
ive tried to explain everything i can...any problems PM or email me
Click to expand...
Click to collapse
Try not to add in a thread into your post. It takes up so much space and isn't required. Answer to your question is yes of course u can root without s-off. Its called unlocking your bootloader. Then add recoveery then root. Its easy. Please follow my guide in other threads to do this.
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
HTC Salsa Memory
Hi Big Bear, primarily thank you for all your posts and info which I found really helpful.
My Phone:HTC Salsa
HBOOT-1.07.0000
My problem is:
I used XTC Clip to S-OFF my HTC Salsa, and rooted it. My main aim is to increase its internal memory. So I followed the thread step by step. After rooting the phone (downloaded "root.zip"), I did the 3 wipes and installed CWM 5.0.2.6. Booted phone and all was fine. I did the 3 wipes again, booted the phone and allowed the ROM to fully boot. Then I entered into the HBOOT --> Recovery --> Install zip from SD Card --> installed "htc-data2sd-ext3.zip" and rebooted phone. I used 16gb Class 10 micro (Partitioned using Minitool to ext3 using just 800mb and the rest FAT32, first partition FAT32 and the second partition ext3 both as Primary). I was really happy with the result as when I booted my SD showed 800mb of free space.
I started to download my favourite applications and all was fine. I then switched off phone, placed the SIM and switched back on. Phone reception was very low too, just one or two bars but otherwise all was fine for about an hour until it started to give me several errors of Force Closing. SMSs won't arrive as when I clicked messages, it Force Closes, the same happened with the GMAIL application. I restored the phone to my back up and I did the process all again for about 6 times even using different SD cards but the result was always the same.
So now I restored again, using CWM 5026, created ext3 partition again and downloaded Link2SD. This however is making almost no difference and my internal memory left is now only about 40mb. Phone is working fine, Full Mobile Network Reception, messages work fine too but I did not solve the memory problem.
Am I missing something? Any help from you is greatly appreciated.
Looking forward to hearing from you when you have time.
Thank you so much once again.
Cheers,
ExplorerOn
ExplorerOn said:
Hi Big Bear, primarily thank you for all your posts and info which I found really helpful.
My Phone:HTC Salsa
HBOOT-1.07.0000
My problem is:
I used XTC Clip to S-OFF my HTC Salsa, and rooted it. My main aim is to increase its internal memory. So I followed the thread step by step. After rooting the phone (downloaded "root.zip"), I did the 3 wipes and installed CWM 5.0.2.6. Booted phone and all was fine. I did the 3 wipes again, booted the phone and allowed the ROM to fully boot. Then I entered into the HBOOT --> Recovery --> Install zip from SD Card --> installed "htc-data2sd-ext3.zip" and rebooted phone. I used 16gb Class 10 micro (Partitioned using Minitool to ext3 using just 800mb and the rest FAT32, first partition FAT32 and the second partition ext3 both as Primary). I was really happy with the result as when I booted my SD showed 800mb of free space.
I started to download my favourite applications and all was fine. I then switched off phone, placed the SIM and switched back on. Phone reception was very low too, just one or two bars but otherwise all was fine for about an hour until it started to give me several errors of Force Closing. SMSs won't arrive as when I clicked messages, it Force Closes, the same happened with the GMAIL application. I restored the phone to my back up and I did the process all again for about 6 times even using different SD cards but the result was always the same.
So now I restored again, using CWM 5026, created ext3 partition again and downloaded Link2SD. This however is making almost no difference and my internal memory left is now only about 40mb. Phone is working fine, Full Mobile Network Reception, messages work fine too but I did not solve the memory problem.
Am I missing something? Any help from you is greatly appreciated.
Looking forward to hearing from you when you have time.
Thank you so much once again.
Cheers,
ExplorerOn
Click to expand...
Click to collapse
Yep... Hboot must be 1.08
Sent from my Samsung GALAXY Tab 2 7.0 using xda premium .
HTC Salsa
vigoos said:
Yep... Hboot must be 1.08
Sent from my Samsung GALAXY Tab 2 7.0 using xda premium .
Click to expand...
Click to collapse
Can I upgrade Hboot from 1.07 to 1.08 since I am now S-OFF? If yes, how can I go about it?
Thank you for your help.
HTC Salsa Hboot 1.08.000
Hi Vigoos, thank you once again for your help. I have managed to follow another thread about Hboot Update for S-OFF. I followed it, updated the bootloader and now I have 1 gb of ext3 memory.
Thanks to you, Problem solved. Wonderful job, keep it up!
Cheers:good:
Please help
Hey @BigBearEvo
I intend to root my friends HTC Salsa and I think yours is the best method out there. The rest kinda confuse me. However, the links dont seem to work. I am unable to download anything.
I understand that your post is old and there could be some updates as of today. Do you know of any better method or how to go about?
All my friend wants to do is get some more internal memory.
Thanks
BigBearEvo said:
nps = no problems
look in rom development section, see threads with[ROM] in it, see pictures and whats included in the roms it self.
personally if you want standard use a sense rom
Options are
Thing rom
Bigbear x series V10
Minds sense 3.5
reason i state this is the rooting part.
All custom roms have root/New SU (Superuser rights app)
This is required to run the increased memory.
NOTE Updating HBOOT?UNLOCKING BOOTLOADER WILL WIPE YOUR ROM CLEAN.
BACK EVERYTHING UP U CAN
You need to update your HBOOT.
Goto HTCDev >http://www.htcdev.com/bootloader
Register (takes a few mins)
plug your phone into the pc and select charge option.
Download these >http://www.mediafire.com/download.php?68k4zzzeamjwswt
extract these in to a new folder on c: called Android
now follow instructions to update your HBOOT.
Ok assuming the HBOOT is now updated via HTCDev
You can follow the rest of the instructions to unlock the bootloader, takes around 15mins or so.
So you got the email with the unlock.bin file.
add that into the Android folder u made with those files in there.
Follow instructions again to begin your unlock.
All Done.
so you have updated the HBOOT and unlock bootloader....
Good now for the next bit.
Installing CWM 5
This is a program installed into the phone itself.
This allows you to do pretty much anything you want.
Main thins are Backup and restore of your device.
Flashing of custom Roms
here is recovery >http://www.mediafire.com/download.php?bumma6im6fu8q4b
this is pretty easy to do.
http://forum.xda-developers.com/showthread.php?t=1438804
this shows how to install the recovery.
Once you have done this, then its upto you if your root it or install a new rom.
...................................................................................................
New Memory
So to increase the memory partition u need to complete the previous task.
Now then.
Tools required for this next task.
Minitool partition wizard >http://www.partitionwizard.com/free-partition-manager.html
SD READER for your pc.
About 30mins of your time.
Ok to start with
Turn off your phone, remove sd and place into the reader and into your pc via USB slot.
Now open up The partition wizard.
Personally id back up your sd right now...just in case.
Now select your sd and create a new partition
You want to create and EXT3 partition and select it as Primary only, apply actions, now it will do its thing, watch as it works.
Now if this has completed the sd may register as bad....don't worry.
Unplug reader and reinsert back to pc, now you should have 2 partitions on your sd EXT3 max 1gb and the rest fat32
this shouldn't have touched your fat32 section but if you didn't follow it right and it got wiped...just copy back your backup onto the sd now.
ok reinsert the sd into your phone and start it up.
now to get access to this new memory...it all depends on what rom you are using.
On stock or stock based rom which have NO APPS2SD.
all roms state if this has it or not. mine dont.
now using a set script you have to flash this in recovery mode to enable the new memory.
For APPS2SD use this >http://www.mediafire.com/download.php?qr5rh2fho1hnbnl
Roms WITHOUT APPS2SD >http://www.mediafire.com/download.php?duigp9ky9796b65
Using the wrong one will cause problems so be very clear what u want.
reboot phone and enjoy new memory.
here are my guides showing the how 2
HTC Unlock >http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides
Install recovery >http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides/recovery
EXT3 Creation > http://bigbearevo.wix.com/salsa/faqs---guides#!__faqs---guides/ext3-creation
ive tried to explain everything i can...any problems PM or email me
Click to expand...
Click to collapse
colind29 said:
Hey @BigBearEvo
I intend to root my friends HTC Salsa and I think yours is the best method out there. The rest kinda confuse me. However, the links dont seem to work. I am unable to download anything.
I understand that your post is old and there could be some updates as of today. Do you know of any better method or how to go about?
All my friend wants to do is get some more internal memory.
Thanks
Click to expand...
Click to collapse
BB's method is the only and best method out here. The links are working I've confirmed them.
Hey vigoos,
Thanks for your prompt reply. The second link, the mediafire link says "invalid file". it doesnt exist. Please help.
vigoos said:
BB's method is the only and best method out here. The links are working I've confirmed them.
Click to expand...
Click to collapse
colind29 said:
Hey vigoos,
Thanks for your prompt reply. The second link, the mediafire link says "invalid file". it doesnt exist. Please help.
Click to expand...
Click to collapse
Use this http://www.mediafire.com/download.php?uma19r3pysr93dr
Many thanks for your help @vigoos. Would it be ok if I bother you with some more questions if any pop up?
vigoos said:
Use this http://www.mediafire.com/download.php?uma19r3pysr93dr
Click to expand...
Click to collapse
Yeah no probs.
Sent from my GT-P3100 using xda app-developers app