Been using a Kingston 1GB SD card for the last 4 months with no problems at all, until yesterday :shock:.
I was downloading the a file from the internet via GPRS directly to the SD card. The browser locked up the PPC so I had to reset it. Now the card is completely dead, whatever device I put it in.
What have I learned from this?
1. The XDA 2i kills SD cards if it is reset whilst writing to the card.
2. Don't use flakey apps to write to the SD card, or download from the internet directly to the SD card!
yup my xda2i killed on of my sd cards as well can't read it on any device
same card same problem ... later some freeze and soft reset my sd kingstone 1gb is missing and also winxp don't format!!
i have seek this utility to format my sd and now all run good!!
http://h18007.www1.hp.com/support/files/hpcpqdt/us/download/20306.html
..you must have a usb card reader to use this utility
hi have a new minisd card which i bought few days ago, used it on wm5, worked perfectly. Yesterday i upgraded to mw6.1 elegance and the sd card stopped working. When i take it out, i get the screen that the card cannot be formatted.
I tried to format it in vista through a inbuild cd card reader/writer but the formatting doesent work. Tried also the panasonic sd formatter but it doesent work either. Does anyone know if there are any programs which can handle that type och programs?
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
bump bump bump
cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
keep the card in your phone and connect to pc with usb cable in card reader mode.
Format card.
If still dont work you got a fake/pirate micro sd
How did you format it ?
On the official SD Association web site http://www.sdcard.org/consumers/formatter/ there is the following statement:
"SD or SDHC memory card file systems formatted with generic operating system formatting software do not comply with official SD memory card requirements and optimum performance may not be experienced."
The site also provide an SD card formatter program, fully compliant with SD Association specifications, but, unfortunately for you, it runs only on PC, so you need a card reader.
I had the same problem some time ago, with a 2GB full size SD formatted with my iPaq and recognized as 1GB, this tool fixed it.
If you connect your device to PC as a card reader, as stated above, it should work.
Go to Settings / Connections / USB to PC and choose Disk Drive. At least, my Xperia, and many HTC have this control panel.
cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
chinese fake
you are a chinese fake, formatted with device that one of u recommended me and working
thx
Hi, basically I put my 512mb micro sd card in to my X1 and then check if it is working, but it says Not Installed.
I tryed another card and same problem. I have formatted to fat32 and still same problem. But when I put my phone in to Disk Transfer it says insert memory card etc. but on my Windows machine it shows me the memory card.
It seems like software to me, is there anyway of fixing this?
I have also installed the HARD SPL to install a new ROM but unable.
Anyhelp is great
hi i installed wp7 then after it i go back to win mo 6.5
but my device can not detect my micro sd card i format it and i change my sd card with new one but my device said no sd card include in tools format sd card said # the storage card has been damaged and unable to be formated #
i do every thing after this problem with my device changing rom install nand android and re install wp7 but non of them can detect memory card i do hard reset , task 29
is it soft wear problem or hard wear problem????
please help me urgent
So you are saying that you previously had WP7..So after changing ROM (windows 6.5 or Android) you need to format your card with Panasonic SD formater so it can read the full capacity of your card....BUT.....! You are saying that you did all this steps and still your device doesn't recognize your sd card and also you changed the card with a new one! HMMMMM......
Most probably a hardware problem (sd card holder and reader in the device)
Imo something went wrong with Installation or so! Dunno!
Some guys here said that WP7 will burn your card or something!
What SD cards did you use?
Anyone else that experienced this problem????
hi
i use 8 gb sandisk micro sd memory when i put memory in my divice in stting sd card & phone storoge show no sd card
when i connect my phone to pc mass storage showe mass storeg but when i click it no data sho and my system tell please inset meomry
when i want format my sd card from my phone th phoe alert the storage card has boon damaged and unable to be formated
is this the hard wear probiem or soft wear problem
please tell me what can i do
if it's hard wear problam can i chang my sd card slot or i should change my phone mother board?????
help me as soon as posibel