Related
I am so lost.
Followed the directions in multiple ADB guides for installing Android SDK as best I could.
Googled everything I could.
Running an Android Dev Phone 1.
Windows 7 64 Bit Ultimate.
When I bring up CMD:
adb device shows my device.
adb shell lists $ (user) instead of # (root).
adb (command list) says I don't have permission.
Thoughts, ideas? I want to re install from scratch but I'm not even sure how to remove the device drivers (besides Deview) and the SDK material to start over.
Any help would be greatly appreciated.
Thank you in advance.
P.S. Sorry I'm new.
Start with "su".
I didn't really know where to put this question, but since it involves my Nexus One I put it here. I put Ubuntu 10.04 on a old Compaq V2000 laptop that I resurrected from the dead, and it's running beautifully. I spend more time on my Ubuntu machine then my new Toshiba/w/ W7. Anyway I need things working like I have on my Toshiba. I set up ADB after getting bits and pieces of information here and there, I just could never get fastboot to work for my N1, except when I'm in fastboot and I plug in my usb it changes from fastboot to fastboot usb, so it's recognized in fastboot, well sorta. But, when I run fastboot devices the terminal just hangs on >>waiting for device<<. Now I have another problem, adb works just fine, but yesterday I used it and where the number of your devices appears is blank now, no number shows up, but I can still run commands. I've done just about everything and I'm at a loss here. Some real help here, no snide remarks, and no [email protected], I need dev help or someone familiar with Ubuntu 10.04, or if you've had this problem lend some help. Once again I already have adb setup, but my number isn't showing anymore, and I need fastboot working, and yes I gave it executable permissions, I exported my path, I created my android rules, I edited my .bashrc file. Thanks much in advance. Long Live Linux!!!!!!
I'm good, found a executable script that solved my problem.
I think you just had to sudo adb. It's always polite to post what you did to fix a problem that way someone can search and find the answer, not just a question that says fixed.
Read Read Read!!!!!!!!!!
evilkorn said:
I think you just had to sudo adb. It's always polite to post what you did to fix a problem that way someone can search and find the answer, not just a question that says fixed.
Click to expand...
Click to collapse
I said in my post that I used a executable script, I mean thats all you should need to know. I read about it somewhere, that's all I needed to know, and I found it on my own. They have nuff post on how to setup your adb, but none are 100%, so you have to take bits and pieces from them, and kinda wing it from there. I don't sudo adb on my system, sudo adb =can't be found. It would be senseles to have to type sudo every time you wanted to run adb, I have my to autostart as root as soon as I run adb. If someone needed help all they have to do is ask. Since this post I've had to re-install ubuntu 3 times and I've gotten my adb & fastboot working with the same method I used the first time. I have my adb setup where I can push and pull from any directory, so I don't fill up my tools directory with too many files, and so I don't have to move files, I can just push & pull to & from anywhere.
Perhaps you can share the script you found?
Dude, chill out. The guides are fine and 100%. I don't need to know ****, I know how to setup adb. How the hell is someone going to find that script when you didn't link it.
First, you have to tell sudo where to look for adb, you obviously didn't link it init.d or some other way to tell the software what to do with adb. You have to do 'sudo /home/name/sdk/tools'.
google query: somewhere executable script ubuntu adb
rm -r -f /
Hope this helps
prettyboy85712 said:
Perhaps you can share the script you found?
Click to expand...
Click to collapse
Here's the links, the script isn't mine to give, and I think that would be against the rules. Go to the first link to get the installer, and the next one to get the fastboot exe. I would follow the instructions in the second link. Once you finish that, run the adb script, If nothing pops out of the script when it starts to run , run it again, or try running (in terminal) command. If you need detailed instructions PM me, it's a little process, you have to edit some files.
http://www.droidforums.net/forum/hacking-help/38186-linux-sdk-adb-autoinstaller-script.html
http://forum.xda-developers.com/showthread.php?t=537508
Good for you.
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Ok, so if you can see your phone through adb, then you are definitely on the right track. Unfortunately, I'm not really familiar with OS X anymore so I'm not quite sure how to do it. Just sit tight for now until someone who does use a Mac, or has more of a clue then I do can help you out.
But seriously, don't pull your hair out. It won't stay on your head forever ya know...
Edit: oops, just saw this is JI6 (Froyo) not JF6, so I can't help you, but here is a general overview:
from terminal inside Android sdk main directory:
tools/adb devices -> list all devices connected that ADB can see
tools/adb shell -> gets a normal user shell on your phone
tools/adb reboot recovery -> reboots into recovery mode, suitable for update.zip root method
--------------------------------
Place the root update.zip on internal sdcard.
from terminal inside Android sdk directory:
tools/adb reboot recovery
Select the update software option, and you will be done.
laxwillsch said:
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Click to expand...
Click to collapse
Start simple:
If you open a terminal on the mac, and go to your android SDK tools folder; what happens when you type ADB shell?
Or if you type any of the ADB push commands?
You need to give more detail around what you are seeing for us to help you.
Ok so if I am in terminal and i type in my /android-sdk-mac_x86/tools nothing happens and it just says /android-sdk-mac_x86/tools is a directory. But if I type the same but with /tools/abd it opens the abd command lines, like how to write code. Then when I try to "adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin"
it says "-bash: adb: command not found"
however when I type laxwillsch$ /android-sdk-mac_x86/tools/adb shell
it does give me the drop down $
but when I then try to write the next line of code "chmod 0755 rageagainstthecage-arm5.bin"
it says "chmod: rageagainstthecage-arm5.bin: No such file or directory"
I am stumped I am beginning to think i need to buy a pc as I am very interested in android development and want to learn more, but it seems all the tutorials are run assuming you are on a PC
EDIT** I have downloaded the android SDK started pack, and the 2.2 root pack and they are all in my /android-sdk-mac_x86/tools folder that is directly on my Macintosh HD for simplicity
Do you know how to change directories (cd command)?
The problem is that you are trying to work in one directory, but all your tools are in another.
So change directories to the tools directory:
cd /android-sdk-mac_x86/tools/
now run your adb commands - you may have to type ./adb to tell your mac to look in the current directory for the adb command (that is what ./ means "start here")
Also, try to understand what is happening so you can more easily troubleshoot: chmod is a command to change permissions, and you are running it on the phone. If you can't push the file to the phone, then you can change it's permisssions. I guess you never got rageagainstthecage on the phone, so there is no way to chmod it.
If you can't do this on a mac, a PC is not easier. I use both, and like both, but you need to learn basic commands first - they apply to the mac terminal and the windows cmd prompt.
Getting root means moving in and out of the phone - adb shell - puts you in a terminal on the phone. So you really need to understand cd (change directory); pwd (present working directory - shows you where you are); cp (copy); and know your current path - what the ./ does.
I hope this helps, not trying to sound condescending - maybe practice a linux terminal tutorial would help
Thanks so much, I am at school right now and cant test out all that but you are really helping me understand all this! I will post tonight and let you know how it goes. again thank you
ok so i dont have my usb cable with me but I was playing around with the commands that you suggested and ureka! i finally got to a point where it says "h70-33-65-19:tools laxwillsch$" thats a first! and when i type pwd it shows "/android-sdk-mac_x86/tools" so that means I am working out of the right directory right? and from here I enable usb debugging connect my phone then just copy and paste the codes from the thread correct?
yes, it sounds like you are on the right track. But take it nice and slow when you follow the steps. It is very important that the commands are entered exactly as you see them.
Also, one step tells you to wait for something to run and kick you out of ADB - wait just like it says - takes about 45 seconds but feels like forever.
If you are in the tools directory - just by typing "adb" no quotes will give you whole page of adb commands - if you get a "command not found", then you need to add the ./ and make it ./adb
Hope this helps and again, read the commands step by step a couple times first so you understand what is happening.
In a nutsell, you push the rage file;
change its permissions, run it;
get kicked out of ADB and then open a new ADB shell;
you are now root;
remount the system partition to give you write access when it reboots;
reboot;
push over some files;
change permissions on files you pushed;
reboot;
Some things to know - SU is a command for gaining root access; when you use SU your prompt changes (in adb shell) from $ to #
If you are succesful you should see the SuperUser app listed in your apps.
Done and Done just rooted successfully couldnt have done it without you! thanks so much
ok, so i wrote a program in C# that will open a process CMD.exe and send adb Commands from a Working directory i setup previously that includes Adb and all the other goodies i need for automating the process of rooting and such.
here's my issue, the program will work perfectly in Win 7, but when i run in XP,
i run ADB shell reboot. the phone will reboot. but never reconnect until i end the my program process. ive tried adb kill-server. tried closing the process within my program. i do notice in XP adb will open two adb.exe processes. even when running outside of my program in the command prompt.
i am using a backgroundworker thread to send the commands.
any help is appreciated.
let me know if you want me to post some code. though i don't think its the programming.
Don't think its the programming either. XP has all sorts of weird bugs and why I jumped ship immediately when 7 came out and have been quite happy since. Don't know much about programming but I've read alot of issues with XP and adb. Stick with 7 if you can.
ok, so still haven't found out why adb doesn't like Win XP. the way i got around it was to drop C# for the ADB commands. i made a batch script to run my adb commands. and a C# console app to send the Serial Modem Commands(for PRL and NV item writing) that i call in my Batch file.
but if anyone has any tips to try ill for sure try them.
more detailed description.
i create a new thread that will create a Process of cmd.exe then do a process.StandardInput("ADB Commands");
the current running thread will finish before the next can be started so no prob with multiple threads running.
all my adb commands ie. adb push recovery.img /wherever/recovery.img
work just fine and does what its 'spose to.
until i get to adb shell reboot.
the phone will reboot but the adb driver is never reconnected after the reboot. like it normally would when running the command from the terminal.
i will have to close my C# program before it will connect and recognize the driver again.
again all this works just fine in Win 7.
i also tried to do a "Scan new Hardware" in device manager after reboot and both programs will just go unresponsive at that point.
next, i will attempt to make my own ADB in C#. if im not mistaken adb uses a TCP connection to communicate with the device. default port 5037 me thinks.
@TronofTroy
Hey do you mind sharing a couple of commands with me in C# on how to write the prl n nv items please.
Also I have been trying to send commands from a windows based form in C# but I can figure out how to do it properly.
Thank You very much!
I just use batch scripts and run them.
filmaker said:
I just use batch scripts and run them.
Click to expand...
Click to collapse
U mean u can write prl, nam, and Evdo with a batch script?
Slinged from my iPhone 4 On Straight Talk using Tapatalk
ADB:-
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as rebooting and rebooting in recovery mode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
USB Debugging MUST be turned ON in the device for ADB to see it & Developer options is hidden in Android 4.2 and
above, Hitting Build number 10 times in
About Phone/Tablet reveals the menu (Thanks lilHermit for reminding me to add it)
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE (If you however want to set environment variables. Click on Show Content)
We can easily append the sdk platform-tools and tools folder to your systems environmental path variable directly from command line(cmd) by simply issuing one command and performing a system reboot:
Code:
[COLOR=Black]SETX PATH "%PATH%;[/COLOR][COLOR=Indigo]SDK_Install_Path[/COLOR][COLOR=Black]\platform-tools;[/COLOR][COLOR=Indigo]SDK_Install_Path[/COLOR][COLOR=Black]\android-sdk-windows\tools" -m[/COLOR]
Just replace the "SDK_Install_Path" in the above with the proper path of your SDK installation. Example: C:\android-sdk-windows
(Thanks to WugFresh for telling me :victory
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. However, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Note:
If you have spaces in path of apk, you can execute the command without breakage if you include the path inside quotes. (Thanks to etcman)
Eg:-
Code:
adb install "G:\Program Files\AreeB.apk"
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped​
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
ls: Shows list of directory
cd: Changes working directory
rm: Removes the file
logcat: Displays logcat
mount: Mounts the partition
busybox: Busybox Applets
Credits
Google: For Android and several searchings
Samsung: For Galaxy Ace s5830I
paxChristos for amazing logcat guide
Broadcom: For their Open Sourceness
XDA Forums : For the precious knowledge
Reserved
Reserved Once More
Last One
Reserve the guide
install full rom
how to install a full rom from adb?
Pretty sure it's impossible. Sorry.
Sent from my E15i using XDA Premium App
Perfect Guide to use ADB Commands..
It is very clear and perfect guide to use ADB commands.. I tested this all and works fine..
You can use apks to do logcats from the phone too, I use catlog.
About Broadcom being open sourced made me laugh hahaha.
open source broadcomm, i see what you did there .
Updated OP
Hey, I have downloaded adb a week ago. I did everything like your tutorial and more but adb doesn't see my device. I already have USB Debugging on and have the USB Drivers, but it doesn't work. This is what I get (Screenshot)
Android-fany said:
Hey, I have downloaded adb a week ago. I did everything like your tutorial and more but adb doesn't see my device. I already have USB Debugging on and have the USB Drivers, but it doesn't work. This is what I get (Screenshot)
Click to expand...
Click to collapse
Probably because of bad drivers
Can you use any other software with your mob
Because when I had this problem, reinstalling drivers fixed it.
iamareebjamal said:
Probably because of bad drivers
Can you use any other software with your mob
Because when I had this problem, reinstalling drivers fixed it.
Click to expand...
Click to collapse
I already reinstalled it like 5 times. Still doesn't work.
Android-fany said:
I already reinstalled it like 5 times. Still doesn't work.
Click to expand...
Click to collapse
Which Windows?
Which ROM?
iamareebjamal said:
Which Windows?
Which ROM?
Click to expand...
Click to collapse
Windows Vista
Stock Rom + Interactive Kernel (If the kernel is important too)
Android-fany said:
Windows Vista
Stock Rom + Interactive Kernel (If the kernel is important too)
Click to expand...
Click to collapse
Ah Vista
That old Nemesis
Frankly telling you bro, Vista sucks big time
I unistalled it as soon as I found out that Android kitchen won't work on it
Sorry bro
I don't know much about Vista
Install 7 or 8
AW: [GUIDE][ADB]Easiest How to use adb, logcat, etc for noobs and newbies
iamareebjamal said:
Ah Vista
That old Nemesis
Frankly telling you bro, Vista sucks big time
I unistalled it as soon as I found out that Android kitchen won't work on it
Sorry bro
I don't know much about Vista
Install 7 or 8
Click to expand...
Click to collapse
I can't install Windows 7/8 because it is not my computer.
But Android Kitchen and the other tools works. Just not adb.
Tapatalked by s5830i
Android-fany said:
I can't install Windows 7/8 because it is not my computer.
But Android Kitchen and the other tools works. Just not adb.
Tapatalked by s5830i
Click to expand...
Click to collapse
Very strange
Download My Phone Explorer and check if its working!!
Its just 2mb-6mb