ITS HAPPEN AFTER INSTALL THIS ROM
Duttys WM6.1 V4.3 ROM Final
I NEED HELP THE DVICE DONT RECONIZE THE SD MEMORY/
WHAT TO DO.
tried to flash another rom?
when you flash all cards have to be taken out.
afterwards you put them back in the phone.
it is a norma phenomen.
you need to format your card again and the will be recognized.
if the phone card is damaged change it.
As above post, plus this has been asked many times before
Thread closed
Related
Hi,
Can I install a new ROM via my SD card because I cannot connect to Active Sync? I've been searching for hours but still can't fix my problem.
I tried to upgrade the radio rom only, but after that there is no radio version, no phone or internet, system on MDA is VERY slow, and I can't connect to active sync.
I can get bootloader up, but I cannot install the stock rom I downloaded from this site, because i can't connect with active sync. I've tried to copy it to an SD card and install from there, but that doesn't work either. In bootloader I do not have USB at bottom left on my screen.
only
IPL 1.03
SPL 1.03
Any help would be MUCH appreciated.
Thanks in advance!!!!!
I have the same problem :-(
It would be very nice if there´s a solution for this problem
Thanks a lot
Daniel
You don't need activesynce
You just need to get into bootloader search for it then run the RUU.
kyphur said:
You don't need activesynce
You just need to get into bootloader search for it then run the RUU.
Click to expand...
Click to collapse
If USB is not showing up in the bootloader (rainbow screen) then the only known way to backup is via SD card. The RUU cannot be used in this case.
You'll want to dig out the original backup that you made when you first got the phone and do a restore boot. Restore the image from the SD card.
If you want the improved radio ROM, I'd suggest restoring from SD card, CID unlocking the device, upgrading to an AKU 2.x ROM (so you've got a 2.x bootloader) and then applying the 2.x radio ROM upgrade.
sd card
Check this
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151
I installed a back up rom on my SD card with another phone of a friend of myne
same problem; wizard_radio version-2.25.11
will follow link in above post and see hoe it goes; anyone got any other comments?
no SD backup
well, funnily enough I ran the ROM backup as a precaution, but it seems a. not to have worked and b. to have wiped my SD card, so am buggered whichever way you look at it.
Does anyone have a backup image they could email/FTP to me so I can at least get to USB in bootloader?
THanks,
Jolyon
the CURE
ok, thanks to the tip from a99tandem.
Reset, holding down the camera button, allows you to go into boatloader, and you can flash a ROM from the PC using RUU. Bootloader comes up with 'USB' in the corner.
Thank god for that; that's 5 hours wasted...
Hey guys,
I'm having trouble flashing a new OS on my X1i.
I had to RMA my phone at the start of january due to a display screen failure. Sony Ericsson, a month later, told me that they had not recieved my phone yet and wanted proof that i sent it. After some running around between them and canada post they finally said "our bad" fixed the phone and sent it back to me.
Finally after 2 months, i had my X1i. Alas, i sent them an english OS phone and they sent me back a German OS phone. I called them back and they said they would "escalate" the call and i should expect someone to call me back within 24 hours. Its been 4 days and i havent got a call back. I longer want to deal with them and have decided that voiding my warranty by changing the ROM is no longer a concern.
I downloaded the HardSPL from this thread and installed it
/showthread.php?t=431218
Apologies for not providing a direct link, but new users cant post links due to spam issues
Now my bootloader reads:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Then i downloaded the English Rom from this thread
/showthread.php?t=475482
APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R2AA010
i renamed the file to
Kovsimg.nbh
Then i formatted my 4gb SD Card with FAT32
then copied the Kovsimg.nbh file to the root folder
then i turned my phone off, unplugged everything from it, inserted my SD Card into the phone and started up the boot loader
however i get an error message saying "no image found"
i tried the process again but with the filename in all lowercase. this did not work either
what am i doing wrong?
Can anyone point me to in the correct direction?
Is there another easier way to do this?
I would greatly appreciate any help.
Thanks,
Ravi
Re:
Hello all,
I did some more reading on the SD method and it turned out i was using the incorrect type of MicroSD card.
I was using a SDHC card before and it was not reading the card correctly. When i switched to my other MicroSD card it worked fine.
Thanks to everyone who was kind enough to spend time getting all of this information together in one place so i could avoid another support call
Cheers
Ravi
There's nothing wrong with using MicroSDHC to flash phones, it's just that some MicroSDHC chip can't be detected by the SPL program.
Although some old phones really can't flash using MicroSDHC, but Xperia doesn't have any problem with flashing using MicroSDHC.
Previously I was using Kingston 16GB MicroSDHC and the "no image found" problem occurs.
But when I switch to Team Group 16GB MicroSDHC, the "no image found" problem doesn't occur anymore.
Yup, it's usually an incompatible or bad SD card that prevents an SD flash.
By the way, if you just want to flash a stock ROM, you don't need to hard-spl your phone. The stock SPL will work. But since you already have hard spl, have fun trying out the custom ROMs! It's the same procedure you did when you flashed the English ROM. Try them out and you won't regret it.
re:
@Tom: Yep, i have a kingston SD card too! it must be that kingson is one of the ones that doesnt work
There's almost a sense of information overload in the roms forum. I'm trying to read up on it and get a handle on all everything but i definately will try. Worse come to worse, and i break my phone, will i always be able to load up the bootloader and flash back to the stock ROM?
Routaran said:
@Tom: Yep, i have a kingston SD card too! it must be that kingson is one of the ones that doesnt work
There's almost a sense of information overload in the roms forum. I'm trying to read up on it and get a handle on all everything but i definately will try. Worse come to worse, and i break my phone, will i always be able to load up the bootloader and flash back to the stock ROM?
Click to expand...
Click to collapse
Isn't that I stated in the SD flash thread that kingston is known for problem.
I had different 16G SDHC and no issue so far for flashing.
Since you already break the cage and HardSPL, isn't that a good time to try cooked rom as well. ;p
haha! that must have been where i got the idea of trying the other SD card and i just forgot i read it. Thanks for posting it.
I've got Touch 10 Extreme Blue downloaded. gonna throw that on over the weekend and see what its like.
But overall i'm glad i got my phone working again.
Oh and i finally got a call back from Sony Ericsson Escalations. The girl that spoke me to said that the place i got my phone from timtechs.com must have got a german phone and flashed it to english and then sold it to me and that act itsef would void the warranty. And then went on to say that i dont have a choice and i will have to simply use it(in german) or sell it to someone else.
So yeah, screw the warranty, its worthless anyway lol
Ok I am having the same issues. I tried to install HDWall cab on the latest march 9th energyrom with WM6.5.5 and Sense 2.5. It prompted me to restart so I did and ever since I tried rebooting it, its stuck on the bootloader. tried to hard reset a bunch of times and just goes back to bootloader. Took battery out a bunch of times. Tried to flash back to AT&T stock ROM via USB. Flash went to 100% and then when it tries to restart after flash, back to bootloader. Ran mtty1_1_.42_538 on PC and then tried to reflash to energyrom and still stuck on bootloader. The weird thing is when I try to flash via USB it the current Rom image is blank. Oh and also I attached an image of what mtty1_1_.42_538 shows when running the application. Please help chefs!!! You chefs are the brains!
bratch15 said:
Tried to flash back to AT&T stock ROM via USB.
Click to expand...
Click to collapse
I am not a chef but at this point I would do an SD flash of my favorite ROM.
Hope that helps.
I would if I could flash from a 16gb micro SD. That is the only card I have. I have read you can't flash with any card over 2GB. Don't know if its true because I don't have any other card. Card is formatted through my pc. Please help!
Something got messed up between installing HDWallpaper cab and the soft reset after.
bratch15 said:
I would if I could flash from a 16gb micro SD. That is the only card I have. I have read you can't flash with any card over 2GB. Don't know if its true because I don't have any other card. Card is formatted through my pc. Please help!
Click to expand...
Click to collapse
it doesnt hurt to try
i'm using an 8GB card and I can flash from SD with no prob
I can't flash from the microSD. I formatted FAT32 through the PC and tried putting a couple different NBH files (stock Roms and custom Roms) and neither my old fuze or my Tilt 2 read it. I don't know if it is because it is a MicroSDHC 2 card. Anybody???
For some reason my fuze and Tilt 2 will not read the card in bootloader. I'm thinking I might have a hardware issue but would like to keep plugging away at possible solutions it might be... The phone is only 2 months old so I'm questioning whether it is a software or hardware issue
In case anybody was wondering, my bootloader reads as follows:
RHOD300 32M SS-BC
SPL-0.85.OliNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
522, 535 815, 860
812, 211 226, 210
232, 860 Calibrated
At the bottom of the screen it will show the USB when plugged into the PC and Serial when unplugged like it should
Possible fix
Format your card again but in 16bit.
Copy the ROM image you wish to burn to the root of the card.
Make sure it is named RHODIMG.nbh and nothing else.
Before trying to burn this rom, I would actually burn HardSPL again to your phone.
Then insert card and see if it will reburn your rom.
I am using a 16GB card in my TP2 without problems, but found I actually had less problems by formatting it to 16bit. And any access to the card was actually faster than formatting it in 32bit.
Hope this helps
I will try that tonight when I get home. Any other ideas until then?
bratch15 said:
I would if I could flash from a 16gb micro SD. That is the only card I have. I have read you can't flash with any card over 2GB. Don't know if its true because I don't have any other card. Card is formatted through my pc. Please help!
Click to expand...
Click to collapse
I think it's not a matter of capacity so much as a matter of brand. If your 16GB is from eBay you might well have a defect/reject card. I have a 4GB A-Data from Newegg that I only use for flashing. Never saw any problem with it.
bratch15 said:
For some reason my fuze and Tilt 2 will not read the card in bootloader. I'm thinking I might have a hardware issue but would like to keep plugging away at possible solutions it might be... The phone is only 2 months old so I'm questioning whether it is a software or hardware issue
Click to expand...
Click to collapse
It seems the read can not be read in two devices. That sounds like a defective card. Get your self a 2GB (non HC) card from a reliable source (maybe BestBuy) and keep it just for flashing.
I had this same problem I solved it check this thread http://forum.xda-developers.com/showthread.php?t=638825
Tried everything on the thread and still no go. Called HTC and sending it in to get fixed.
I've always experienced trouble (mainly Windows or connection trouble) flashing over USB cable, so I used to prefer flashing directly from SD Card. Did this on my old Hermes and Kaiser and never once experienced problems with it.
Recently got myself a Rhodium, and installed OliNex HardSPL on it.
Downloaded few roms, formatted SD card to FAT32, and put one in the root named "RHODIMG.nbh" as supposed to.
Went into bootloader, it started flashing, but at a certain point the progress meter just stopped moving. I left it for like an hour, but nothing had happened anymore.
Pulled the battery and fixed the phone by flashing a shipped ROM over USB cable successfully, and tried flashing from SD card again with a different ROM. Resulted in the same issue.
Anyone know what could be causing trouble here?
Are you maybe flashing A GSM device with a CDMA ROM, or the other way around?
Very sorry for not updating sooner, unexpectedly been away for a while.
I did make sure both the ROMs and the unit are GSM, not CDMA. Had the same problem in an attempt to flash the factory ROM from SD card.
Hello guys,
now i have got a hd7 windows phone flashed with a custom ROM. (deep shining i think ...)
After the official mango update i had the first reset. The HTC-screen freezed and i couldnt do anything, so i reset my device. After that i installed a custom rom on my phone. Until now there are 8 months since the first reset and 5 hard resets. The resets werent made by me, the phone resets himself. So can you help me please ?? What can i do to stop this ?
I've already asked this in a german forum and they answered that the issue is my mini sd card ! So i tryed to change it today. I've did it but the phone didnt recongnized my new card. So i put the old card back. I looked at my new card and it was only a simple MINI SD CARD 2GB. The card of the device is MINI SD CARD HC 16GB. So my second question is, does only a mini sd HC card fit into the HD7 ?