I need help with connection, pc not recognition ppc, I was try lot of advices, but noting happend. I use Windows XP SP2 and I have HTC HD Win 6.1. I wish change SPL from SD card, but I can not find solution. Thanks for any help.
Read this - http://forum.xda-developers.com/showthread.php?t=505377
You may also need to update your usb drivers - follow this thread - http://forum.xda-developers.com/showthread.php?t=524619
You can't update spl via sd card to my knowledge, this has to be done via usb.
Nothing
I was try, but nothing, I will try to explain, sometimes whan I connected HD everything is ok, about 10 or 15 seconds, after that disconnected. I try unpluged and pluged again, but nothing happened. If I wait some time, again 10 or 15 seconds is ok and again disconnect.
My English is not good, but I try to find help.
So to confirm, you have changed your usb drivers as explained in the thread I referred you to?
If so, you can try to reinstall ActiveSync.
...
I was reinstal windows xp and nothing happened. When I wait 10 minutes and try again I have cinnection only 10 seconds, if I unpluged cabl and pluged again nothing happened, but if I wait 10 minutes and try show me connection 10 seconds.
And again I ask, did you replace your usb drivers using the link I gave above.
I will send HTC in service, thank you for help.
You still haven't answered my question and now you want to send the device in. Why send it in for service if you haven't even tried to fix it or if you don't know what the problem is?
Did you try replacing the usb drivers on your pc according to the link I gave you? Do you perhaps not understand what I'm asking?
As ClydeB1 stated above your issue is probably easily solved and maybe no need to leave it back to HTC for service, but you need to try the suggestions made by people first.
There is a number of reasons why your pc wouldn't pick up your HD. One as provided by ClydeB1 is that your usb drivers aren't correct and would need updating by following this guide.
You could also make sure that 'allow usb connections' is turned on in activesync connection settings.
Let us know if you have tried these and then we can offer more suggestions
Ta
Rick
Yes I was replace drivers, And I have one more problem with HTC, last night when I try turn on HTC nothing show on display, only black screen, I try about 10 times and I successful turn on HTC, HTC working about 5 minutes and when I look display is black, I try 100 times turned on but nothing, I think the best way to send my HTC in service. I am very disappointed in HTC, my HTC was working only 5 months, I think 10 hours of conference. (When I press power button, display is black, but I hear sound when HTC power on), HTC working but display is black, like the HTC extinct.
I took out the battery and waited about 2 hours and tried again to start the HTC and successfully started, then I did the clear storage and again refused to start again, I took out the battery and waited 2 hours and then started again, HTC, now he works, but not know whether to USB connection,I will try later. I do not know what is happening with my HTC.
The camera also will not start.
Related
for the past few weeks i have not been able to connect my phone with any computer using any cord. all are either vista computers or they have active sync 4.5. at this point i have reached the conclusion that the problem lies with the phone itself. i may have deleted the whatever it is that runs the usb on the phone.
any suggestions or past experience would help. i don't really feel like spending money on a new one. it gets frustrating when many mods are done from (or at least started) on the computer, and then require my to connect my phone.
btw... i have synced the phone many times before the problem started using all the same components i am trying now.
EDIT: the battery icon shows it is charging when i plug it into a usb, but from there, i have nothing, and i have also reset memory a few times since then too.
Thanks again from a modding newb!
-mike
How are you trying to sync it? Plug it in and wait for Active to launch? Launching Active yourself and clicking connect, or from within the phone itself?
I wonder if disabaling USB charging would allow you to sync it up again.. Have you reinstalled the computer software from the CD again?
I am sure there is something you can do aside from a full phone reset...
At first, i just plugged it in, like i do every day, and wait for active to launch, but it didn't, so i opened it manually.
I tried reinstalling from the OEM disk, and also downloading directly from Microsoft (both AS 4.5).
ill poke around and see if i can disable USB charging like u suggested. thank you.
It had been going so well, until 9 months later...today. This morning I noticed my battery low (12%), and I thought I'd charge it when I got to work. However it never made it to work - when I went to charge it the back light was on and it was frozen. Thought nothing of it, plugged in the charger, hit the reset button and... nothing. So battery out, back in - press the power light and all I get is the solid green light, no screen, no activity, nothing.
The charging light isn't on either when it is charging, yet the battery shows good charge (tried it on a friends). I'm guessing it's dead, any other takers? I'll ring Vodafone tomorrow, but I'm running with a Duty rom. Hopefully as it looks terminal it should be ok, fingers crossed??
Same thing happened to me just now. WTF? I didn't even do anything. Just totally dead with green light only on. I've tried everything. Pull battery, connect USB, charger, took out SIM, took out memory card, even tried with another new battery, nothing at all. and I just got this phone as replacement last week.
You are stuck in OEMSBL. I can help, but it will be later or tomorrow.
Tell me your ROM, SPL Version, Radio Version, & device model number as well as typey, i.e. Tilt, TYTNII, etc...
HMMMM seems we have a new problem here
Hi Guys
Guess this is now new problem with tytn ii had my phone repaired a couple of weeks ago. technician said something about 3 bad block in the CE was responsible for the TRI color boot screen i used to get.
He said that he formated the phone and reloaded all "firmware".
Prior to sending it in i had Confused Stu Vista Mobile 1.3 running on the phone. Also had OLIPRO 1.0 as the sspl
Tried Frankenkaiser but the phone will not complete step 7 keeps showing that it is an unknown USB device, once i replug the USB cable.
Loaded all the Qualicom Drivers for the Phone as well.
GSLEO3 you and JockeyW are "GOD'S" when it comes to these issues.
Please grace me with your knowledge.
Running Confused Stu Vista Mobile 1.3
Radio 1.65.14.06
wolffie02 said:
Tried Frankenkaiser but the phone will not complete step 7 keeps showing that it is an unknown USB device, once i replug the USB cable.
Loaded all the Qualicom Drivers for the Phone as well.
Click to expand...
Click to collapse
why did you even try frankenkaiser? you only need to use it if you have no SPL (and only if you have the radio from hell).
anyway, to everyone in this thread... if the device still causes the PC to load the qualcomm drivers, when plugged in, then you can recover it, though usually need to use another program as frankenkaiser is currently only compiled for specific radio versions.
Sorta Dead with solid green light
I am in the same boat ... I mistakenly flashed a non-Kaiser radio ( 1.65.28.25 ) and then thought I was reading a Kaiser page about ho to fix it and I ran a `2a`. Ooops on me.
I cannot get tricolor bootloader ... tried hard-reset ( two soft keys and reset ), and Camera-reset, but nothing is working.
What does work:
-bong when connected to PC
-mtty connects - but no `CMD>` prompt.
-able to issue `setboot` - and get back "ARM9BootMode:1".
I've read all the posts and it seems like without the bootloader, I am stuck.
This is an ATT Tilt/8925.
Any and ALL suggestions much appreciated.
seems i have such a problem
the kaiser shows only solid green led. nothing else
doesnt enter tricolor
when i plug it to usb, device manager shows first Qualcomm device and then finds several new devices such as Data Interface
device is AT&T Tilt 8925, original rom version, radio and spl are unknown
who can help me?
cmonex said:
anyway, to everyone in this thread... if the device still causes the PC to load the qualcomm drivers, when plugged in, then you can recover it, though usually need to use another program
Click to expand...
Click to collapse
what program?
Tried to flash button rom with full battery. Comunication error. Only boots to 3 color bars. Every time I retry the flash the phone starts flashing on and off.
Mmmmmm
What is the problem....?
Does your wizard dont begins... so it wont wake up... dont start ?
You cant turn it on?
What do you mean with turn on and off?
is blinking?
If the problem is its blinking and dont stands on... it is a serios problem but if the wizard saty on ... what ipls and spl got?
What did you do?
Men we need to much info..... than it is on bootloader, i cant upgrade etc etc etc.
FUUUUUUU******@@@@@
while flashing the button rom, i got a communication error. At random times after connecting the phone via usb the screen flashes on an off and communication is lost. sometimes the phone gets mostly through the flash, sometimes it wont even start to flash. But here is the f-ing kicker, while trying to recover in the button flasher proggie, my computer locked up and WILL NOT TOUR BACK ON. thats right, i lost my phone and computer in 5 minutes thanks to this flasding sh*t. i am only able to access this forum via a blackjack II smartphone.
OK, Feeling better
Sorry about that.
I got my computer back on.
It wouldnt even go to cmos so I traded out my cpu, still didnt work.
Put the old cpu back in and it booted just fine. Not sure why that happened but at least my computer is back on.
Ok so back to the phone. It boots to the 3 color bar screen and shows IPL/SPL as 2.25. After connecting the USB cable it will sometimes start flashing, not always. If I restart the button rom flasher it will start to flash, after getting to some % the phone starts flashing.
By flashing I mean the screen flashes on and off. Likely the phone is rebooting itself constantly.
Undo?
Is it possible to just undo what ive done? Is the old info still on the phone? IPL/SPL are still the same as before.
No, your old info is not on the phone anymore. The first thing that is done when the flashing process begins is deletion of your flash on your phone. This may seem like a n00b question, but have you tried using a different USB port? DO NOT flash with a port off of a hub, they are usually under powered when compared to direct board connected ports. Try one on the back of your tower(or directly in your notebook whatver.) and see if that works.
It also failed on the back usb port.
All is not lost is it?
I believe that this phone might need a new battery.
I had some problems with the phone turning off when it wasn't supposed to but it hasn't done it in a long time so I though I was ok. Do you think that a new battery might allow this downgrade to complete?
Its possible. The Wizard is kind of a tempermental device....it flashes when it wants to some time. You can try and see if a new battery is what fixes the problem, but in all honesty, it could be anything.
Xtrange
ok
try to get connecte with that cable other device, maybe is broken the cable...
try another usb port...
download again the button rom, maybe is corrupted.
lets wait what happen
Its your battery , replace the battery and it will charge and then you can flash it,you can get two batteries for a tenner on ebay
Battery
OK, so once the new battery comes, it will charge via usb and wall charger just as it would with the OS installed? Im not sure if charging is dependent on the OS at all.
Thanks for all of your help guys.
Does it charge?
It charges??????
in bootloader dont charge men....
if the phone stuckson welcome screen maybe charges, on htc logo dont, neither on splash screen.
All we do is try to help people to upgrade and try to found solutions for those who made a bad upgrade, but i didn't cook, and dont develop anything so my only contribution is for experiences.
Hope your wizard revives.
My wizard does not bootup...only three color bars
I was trying to flush with new ROM and it stopped after 100% and in the mean times, my system rebooted. Now I got this MDA with three color bars, battery is OK but important thing is that it does not connect to computer thru Active Sync............any help>
So, I went to sleep one night when battery was around 55%, woke up 8 hours later, my phone surprising turned off (turn out to be out of battery)..
I charge and turn it back up, the screen for the first time since I got the phone start flickering (the first screen before windows boot). Looking for a quick fix, I want to hard reset, but I would like to backup everything before I do a hard-reset. The problem - I cannot get neither activesync to work NOR disk mode to work.
This flickering screen had never happened before, I don't know the cause. Very confused myself what happened while I slept, solution to at least ONE of the problem would be helpful
Thanks
Ok, I read on forums that I could potentially fix the problem by downgrading to HardSPL 1.37. The problem is that it requires activesync to work. Not being able to get it to work, I did a hard reset, now everytime i try to go into activesync, it tells me that i need to install some software from the Getting Started CD which I don't have.
Someone help me, this is driving me insane
Thanks.
I havn't notice this, but I cannot get anything out of hte speaker because the phone thinks a headphone is plugged in, i dont know if this disables any activesync from the usb cable.. but either way, I cannot get pass the screen where it asks to install software from Getting Started Disc.....
it seems like the computer doesn't recognize that a phone has been plugged, tried on diff computers already
someone help, my phone is useless with this problem.
I have also this problem, it happened about a year ago and I have not used it since.
Now I wanted to recover the contents of the flash drive, but I can't get it connected to the pc.
I made a hard reset, and it stays the same flickering and heating a lot. And now I can't go past the screen calibration.
How can I access the flash?
Ok guys,
as the title says Lumia 710 is bricked.
It had last factory update and everything was working fine. Then i had to mess with it and to try to install Rataplan V9.1.
The process was working ok. By default, bootloader was in DLOAD mode, so in order to install custom ROM i needed to upgrade to Qualcomm. I have upgraded it and installed Rataplan .nb rom to the phone with NSSPro V0.54.
This is when my problems start.
The phone starts with one long vibration followed after few seconds with one short virbtation and thats it. No screen, no system, zip!
When i try to connect it again by usb to check it with NSSPro, it always starts in NAND disk mode. It does not matter do i start it normally on power button or with volume up. Its always in NAND. And it is always stuck. While the phone is connected to USB i can see Qualcomm CDMA Technologies MSM device in device manager but it has yellow mark like the driver is not installed.
I have tried several other roms, and NSS always shows that the rom is successfully installed, but the phone (other than vibration and NAND mode) is dead.
I have also tried all the solutions i could find on the net but no help. Tried, nokia recovery tool, WP recovery tool, Chimera e.t.c. Nothing works. Now i have a problem with NSS. It keeps stucking and beeing unresponsive for every option except Custom OS flash. Whatever else i click it either says tha phone is not detected or the app stucks and shuts itself down.
Is there other tool i can try?
Can i do anything to recover this phone or did i kill it?
PLEASE HELP!!!
Well that sucks and it sucks no one has tried to help here. I'm fair with Android but too new to WP's to probably be much help. Can you pull the battery out of the phone? Might pull it and leave it out a couple minutes then retry. You also might try from a different computer in case something has gone wrong on your computer in terms of port communication or maybe even a virus of some sort. Good luck.
droidzer1 said:
Well that sucks and it sucks no one has tried to help here. I'm fair with Android but too new to WP's to probably be much help. Can you pull the battery out of the phone? Might pull it and leave it out a couple minutes then retry. You also might try from a different computer in case something has gone wrong on your computer in terms of port communication or maybe even a virus of some sort. Good luck.
Click to expand...
Click to collapse
Tried allready every solution that i could find or think of, including things You described. Nothing. I was left with no other option but to send phone to service. They have a box unit with which they should be able to recover phone.
That was 2 days ago. today is third day so i am thinking that my phone has gone beyond repair. Only thing i can do is to wait and see...
Why not...?
Why not send it in real life to a windows phone expert. There should be a place to get phones repaired But, if they say that it isn't possible for them you may have rendered your phone useless. Google should be your mighty friend in this case :crying: I wish you very good luck.