So my mate owns an X1 and he tried flashing a ROM last nigth but somethings gone wrong and now it's stuck in bootloader mode.
I said i'd have a look at it for him to see if i could do anything.
I was thinking of trying the microSD flashing without the need of a PC as it won't sync, but then lies the problem of it turning on and going straight to bootloader.
When charging it turns itself on automatically and loads up bootloader then a white screen with blue loading text.
When ever i try putting it in bootloader mode on charge, it just goes straight to the loading screen and then goes off.
Anyone know a way of fixing or flashing new rom to fix it?
Any help would be much appreciated.
Thanks
Related
Hello all,
as the title says, one of my touch diamond's is stuck in bootloader screen.
I didnt do anything in between it working and not working, it was on my desk, put it there working, got it 5mins later, and it was in bootloader screen (tricolor screen).
What i've already done to try and fix it:
flash it with the original HTC rom, flash completes succesfully, phone reboots to tricolor screen, so no solution there.
install mtty and format the phone, this completes, reboot the phone, again goes to the bootloader.
reflash the phone with original rom after cleaning it with mtty, flash again completes succesfully but when it reboots after flashing it just goes to bootloader again.
Tried to flash a Hardspl: stuck at 0% and stays there. so that doesnt work.
BUT! when in mtty i give the "boot" command, it DOES start to boot WM. but then again, when i turn the phone of, and on again, or it reboots because of first start after flash, it goes to bootloader again. The VOLDOWN button is NOT stuck, cause when it boots i can use the vol buttons perfectly fine.
Anyone got an suggestion in how to unbrick it? i have a second, perfectly working diamond here too, if that helps in any way.
Some more info ive just seen in mtty, when i told it to boot, it said ONE BAD BLOCK IN CE, remove block ---- to ---- (dont know the exact numbers anymore)
hi..i had something like that...
just download this.
"RUU_Signed_1_93OliNex_HSPL_UnsignedEdition"
it's only 1.7MB and it's will make it work.. atleast it did the job for me...
Hi,
My T mobile touch diamond stuck in bootloader screen? Any experties to help me please.
Thanks in advance.
Hi all
I unlocked the bootloader, then rooted the phone then flashed a custom ROM. All went well, then for some reason the phone switched off and for a few hours it would not turn on at all. I left it on charge and eventually I could turn it back on.
However since then I have not be able to boot into fastboot made at all. When i first turn the phone on I am clicking the up volume to get into fastboot, but I never get the sony logo, instead it goes straight to the boot image from the rom (the colourful X), and it does not progress any further, I think the ROM was KA revolution.
Anyone have any ideas? I am completely stuck
and I have followed the steps here using the Update service tool from SONY http://forum.xda-developers.com/show....php?t=2216974
the phone detects fine but it tells me I have custom software and it can't be updated.
fixed now... its all good
Sorry for the bump but do you mind telling me how you got it working?
Hi all,
I use CM12 from MacLaw in combination with TWRP 2.8.1.0 recovery for about 3 weeks now.
Yesterday the phone didn't respond properly, was very very slow and I basically couldn't use the phone. It felt like the CPU was at 100% all the time, so unlocking the phone, calling and so was nearly impossible. A reboot (battery removal) didn't solve it, also the pin code for the sim card came after a few minutes while usually this will come right after starting.
So eventually I did a factory reset from the menu as I did on other occasions just to get rid of this kind of problems.
Well, right after the Samsung s3 mini logo I get the TWRP logo and it will be stuck in there, I see it blinking every few seconds and that's it. When I connect the phone to USB I hear it connecting-disconnecting every few seconds (bing-bong, bong-bing sound).
After a while I flashed TWRP using Odin again, this didn't give any problem but it will still hang in this TWRP loop.
I found some references to this problem but no real solutions. Someone suggested to use ADB but I don't know how to do that, nor could I find a suitable guide on this.
Can anyone help me? Or is it bricked somehow?? I suspect not, download mode is still working.
Thanks for any help!
As I said in the title. The phone's memory seems to be read only.
I can access the fastboot mode of the phone and issue commands like flashing the recovery but it doesn't seem to update anything on the phone even though I get the "OKAY" message.
My phone is unlocked and until last night I was running CyanogenMod on it just fine. But now I can't flash a new recovery or access it. I have TWRP installed but everytime I try to boot into recovery the phone gets stuck on the logo screen and flashes every couple of seconds.
If I try to start my phone normally I get the cyanogenmod logo on start up (even after flashing stock) and the phone never actually boots up.
Anyone had the same problem before? If you need more details I'll reply ASAP.
My phone is the retail European XT1068 Dual Sim. Thank you in advance for any help.
Same issue here (I'm MrPowerGamerBR on Reddit), the more I read about trying to fix this issue, the more I start thinking "this phone is dead, move on..."
There isn't no fix for this, the only way to fix is replacing the logic board.
hello to all,
So my problem is that i got a black screen after i flashed with sp flash tool. I am not able to see anything on screen nor put it in recovery or fastboot. If i connect to pc you can here where the pc picks it up. But still cant see anything on the screen. Ive tried charging it, changing cables, reflashing because am able to put it in broom mode so the sp flash picks it up and the result always complets good with the green check mark but you can still not see anything in the screen. Did my screen burn out or what? Can you please help.