I rooted my phone so long ago just following JFs instructions I cant remember what spl I installed and now with the need for the Danger SPL or Eng SPL to run the new eclair roms I wanted to know what I am running I booted into the spl and it says HSPL10.95.3000 so I am pretty sure that I am using the Hard spl, is that correct ? Does this mean I can not use the new eclair roms with installing a new spl ?
If you booted into fastboot and it said HSPL10.95.3000, then yes, you are running the Hard SPL, and yes, you need to install the new SPL before flashing any Eclair ROMs.
Joe333x said:
I rooted my phone so long ago just following JFs instructions I cant remember what spl I installed and now with the need for the Danger SPL or Eng SPL to run the new eclair roms I wanted to know what I am running I booted into the spl and it says HSPL10.95.3000 so I am pretty sure that I am using the Hard spl, is that correct ? Does this mean I can not use the new eclair roms with installing a new spl ?
Click to expand...
Click to collapse
All you do is press
Camer+power then look next to Hboot.
tardie said:
If you booted into fastboot and it said HSPL10.95.3000, then yes, you are running the Hard SPL, and yes, you need to install the new SPL before flashing any Eclair ROMs.
Click to expand...
Click to collapse
thanks, man I just l wanted to double check. Do you think that eclair roms will always require a danger spl or eng spl? I just dont want to bother changin before the eclair roms are even stable enough to flash for regular every day use.
Joe333x said:
thanks, man I just l wanted to double check. Do you think that eclair roms will always require a danger spl or eng spl? I just dont want to bother changin before the eclair roms are even stable enough to flash for regular every day use.
Click to expand...
Click to collapse
1.They need Haykuro SPl
2.Didnt you hear the news?
Tmo will give the Mytouch/G1 up to 2.6 updates.This was said by tmo and some devs on twitter.
Ace42 said:
1.They need Haykuro SPl
2.Didnt you hear the news?
Tmo will give the Mytouch/G1 up to 2.6 updates.This was said by tmo and some devs on twitter.
Click to expand...
Click to collapse
according to one ROM thread I read the creator of the ROM said you must have Danger or Engineering SPL. I have heard of people bricking there phones using Haykuro SPL. Thats great news though, I had thought they were stopping G1 updates after 1.6
Related
Hi all,
I really wanted to try out the latest Hero build. So I began the procedure, first by flashing the radio, then the SPL. The radio update went fine. I also installed the new SPL (no errors whatsoever), but when I checked to see whether I had the correct version, it displayed HSPL10.95.3000 (I had installed a HardSPL before). I reapplied Haykuro's SPL update, and still no change. How can I remove the HardSPL, and is it okay to continue the Hero install with my version? I don't want to brick my phone (obviously) and I'm quite a newbie.
You cannot "remove" the SPL. it can only be overwritten by the Haykuro SPL. I suggest re-downloading the Haykuro SPL and flashing it again. Do not flash a hero rom with the SPL that you currently have.
Thanks for the reply. I tried overwriting it again with Haykuro's SPL, but it didn't work. On this website, I found that
The second type of HardSPL is truly HARD...They bypass the vendor checks on ROMs, allowing you to load any ROM onto your device. This is a necessity if you want to run a cooked ROM. They disable overwrite of the current SPL. This is why I say they are truly HARD. So, even if your ROM comes with a new SPL, it won't overwrite your HardSPL.
Click to expand...
Click to collapse
So, is there a way to remove HardSPL? I've been looking for info on this for hours and found nothing.
peshkata said:
Thanks for the reply. I tried overwriting it again with Haykuro's SPL, but it didn't work. On this website, I found that
So, is there a way to remove HardSPL? I've been looking for info on this for hours and found nothing.
Click to expand...
Click to collapse
Well if you remove HardSPL what SPL will you have for that like 5 minutes or so? Try flashing to Engineering SPL first and then flash Haykuro's Special SPL
Try flashing to Engineering SPL first and then flash Haykuro's Special SPL
Click to expand...
Click to collapse
Tried it, worked great. Thanks!
Glad it worked peshkata! Could you (or a mod) please edit the title so it stated SOLVED so people know? Thanks!
how do you find out what spl you have ?
can someone breifly explain to me what SPL is
and i right in thinking SPL is what can make a brick ?
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Downgrade to Hard SPL from Danger SPL??
AdrianK said:
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Click to expand...
Click to collapse
When I rooted my phone I installed Haykuro's danger spl with the latest radio. I didn't know it can potentially brick your phone (hence the danger part lol). I'm running cyanogen 4.0.1 and it's working just fine so far but I had 3 questions
1) Is Hykuro's Danger SPL only risky during the installation process or can it still possibly brick your phone after a successful installation (in other words, elaborate on the "danger" part please)
2) Can I downgrade to Hard SPL after installing the Danger SPL
3) How would I downgrade to Hard SPL?
Thanks guys!!!
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
rondey- said:
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Click to expand...
Click to collapse
AdrianK said:
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
Click to expand...
Click to collapse
Thank you guys! In that case I'll just keep H's SPL seeing that I already installed it successfully without bricking my phone (yay)
Really appreciate both of your time!
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Unless you are Unrooting and flash the original spl. I've done this many times so I know it works.
Does SPL: 1.33.2005 help the regular ROMS run better (Cyanogen's)?
I use dxTop, seems to run out of memory quickly.
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Thanks for the warning!
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
sasa3791 said:
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
Click to expand...
Click to collapse
If you didn't downgrade to RC29/7 then you should have the 1.5 radio. Check by going to Settings > About Phone and baseband version. It should be 2.22.19.26I.
I think you can just flash HardSPL as update.zip as you are, but I' not completely sure...
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I swear I've heard people say they have, but dowgrading the radio after installing Danger SPL did cause bricks...
I'll go check
You WILL brick your phone if you attempt to downgrade your radio after flashing the new SPL or if you do not have the latest radio installed before flashing the new SPL
Click to expand...
Click to collapse
Hmm can't find anyone that said they did :-(
FYI
FYI
@Adrian K and nephron
When I unrooted my spare G1, I got it completely back to stock (circa October original shipment stock)
I downgraded my SPL successfully from the danger SPL all the way back to the original SPL. Also when I downgraded back DREAIMG.nbh, I confirmed at the time that the radio downgraded with it. My original post was on the unlockr.com when I was trying to help David of unlockr.com with some tutorials.
My original quote from unlockr
BTW: I have confirmed via the bootloader that the radio DOWNGRADES back to stock by applying the DREAIMG.nbh update FYI
From the bootloader I am now at
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Click to expand...
Click to collapse
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I think it's downgrading the Radio, while on Danger SPL that will brick your phone b.
I have also gone from Hard to Danger back to Hard again with no issues.
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
polarbearmc said:
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
Click to expand...
Click to collapse
If you are talking about the one click method that is know on the market as recovery flasher, that only takes care of granting root access and flashing cyanogen's recovery image. The radio and spl upgrades are on you.
Try here for more explanation
http://forum.xda-developers.com/showthread.php?t=550050
yea that's what i'm talking about... now don't get me wrong, i believe you guys here on xda first and foremost... but theres a video tutorial on android and me, and it doesn't show them installing the radio and spl between using the recovery flasher and then installing cyanogens 4.0.1... are they not doing it right in the video or are the radio and spl optional? all the guides on here seem to say you do have to flash them but the video clearly shows them not stopping to do it. so maybe their video just sucks haha. but any idea on that?
thanks so much
I have 1 click rooted and installed Cyanogen 4.01, I am on CRC1, my understanding was as I was already on 1.5 Cupcake, my current SPL and Radio were current.
I read somewhere that the 1 click method is only temporary root. But if someone could elaborate on this it would be very helpful. Also what is this hard spl ?
I have the latest cyanogen rom and i know it flashed a new radio when i did that (via the htc update)
now if i wanted to swtich to a new rom like MLIGN hero 2.8 would i need to flash back to the older radio(radio 2.22.19.26I)?
im just trying to avoid a brick, i've already bricked one of my phones switching radios lol
mswiss said:
I have the latest cyanogen rom and i know it flashed a new radio when i did that (via the htc update)
now if i wanted to swtich to a new rom like MLIGN hero 2.8 would i need to flash back to the older radio(radio 2.22.19.26I)?
im just trying to avoid a brick, i've already bricked one of my phones switching radios lol
Click to expand...
Click to collapse
Pretty sure 2.22.19.26I is the latest radio.
2.22.19.26I is the latest radio and has been since cupcake.
Boot into hboot [camera]+[power] and it'll tell you what version you're using. I will bet my own anus it's 2.22.19.26I.
yea it is... i was pretty sure in order to get cyanogen's rom it changed your radio image when you flashed the htc recovery image, im guessing it was the same one i already had then
mswiss said:
yea it is... i was pretty sure in order to get cyanogen's rom it changed your radio image when you flashed the htc recovery image, im guessing it was the same one i already had then
Click to expand...
Click to collapse
Yea the HTC recovery image does include a radio, but its the same one we've been using for ages.
Incidentally, it's not radio images that brick your phone, its the 1.33.2005 spl (also known as Haykuro's spl, deathspl, etc), which is only compatible with radio 2.22.19.26I, so unless you're using that spl you can flash radios freely.
lol i wouldnt say freely.... radios can cause bricks just like spls lol
Is it safe to "revert" to HardSPL from Danger SPL?
-I use the OpenEclair ROMs, and the newest ones seem to not require Danger SPL anymore...do you think I should change the SPL?
Baalzamon said:
Is it safe to "revert" to HardSPL from Danger SPL?
Click to expand...
Click to collapse
yes.. its safe
Baalzamon said:
-I use the OpenEclair ROMs, and the newest ones seem to not require Danger SPL anymore...
Click to expand...
Click to collapse
OE 1.2.2 needs Danger SPL, ignore what the changelog says it's wrong
http://code.google.com/p/openeclair... Type Status Priority Owner Component Summary
Baalzamon said:
do you think I should change the SPL?
Click to expand...
Click to collapse
nope .. why would you want/need to downgrade it?
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong(old) radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
Baalzamon said:
Is it safe to "revert" to HardSPL from Danger SPL?
-I use the OpenEclair ROMs, and the newest ones seem to not require Danger SPL anymore...do you think I should change the SPL?
Click to expand...
Click to collapse
There's almost no point in reverting. What's the harm in having the extra space for future necessities?
Firerat said:
yes.. its safe
OE 1.2.2 needs Danger SPL, ignore what the changelog says it's wrong
Click to expand...
Click to collapse
Nope. It may be broken, but that is a very minor tweak to fix.
nope .. why would you want/need to downgrade it?
Click to expand...
Click to collapse
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
lbcoder said:
Nope. It may be broken, but that is a very minor tweak to fix.
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
Click to expand...
Click to collapse
Why revert and have to risk another potential brick when he's already using the DangerSPL and successfully installed it without a brick?
lbcoder said:
Nope. It may be broken, but that is a very minor tweak to fix.
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
Click to expand...
Click to collapse
accidental bricking? How do you accidentally flash an old radio with out knowing? The newest radio that was just posted in the dev section is compatible. Basically the reason why the old radio wasnt compatible with the Danger SPL is because the Danger SPL is simply the MT3G SPL just modified to be used on the G1. The MT3G was never compatible with the older radio since it came out after the radio update. Also there are advantages to having the Hard SPL do some research before bashing SPLs.
http://code.google.com/p/android-roms/wiki/SPL
http://forum.xda-developers.com/showthread.php?t=625886
Joe333x said:
accidental bricking? How do you accidentally flash an old radio with out knowing? The newest radio that was just posted in the dev section is compatible. Basically the reason why the old radio wasnt compatible with the Danger SPL is because the Danger SPL is simply the MT3G SPL just modified to be used on the G1. The MT3G was never compatible with the older radio since it came out after the radio update. Also there are advantages to having the Hard SPL do some research before bashing SPLs.
Click to expand...
Click to collapse
I have looked into your future.. I see a long, aggressive post from lbcoder detailing EXACTLY why you're WRONG.
He's quite passionate about this spl.
goldenarmZ said:
I have looked into your future.. I see a long, aggressive post from lbcoder detailing EXACTLY why you're WRONG.
He's quite passionate about this spl.
Click to expand...
Click to collapse
I am not wrong our opinions just differ. I use to be against the Danger SPL also until I flashed it myself and seen that it was safe if you could follow directions which is why I made a How-To for others.
Joe333x said:
I am not wrong our opinions just differ. I use to be against the Danger SPL also until I flashed it myself and seen that it was safe if you could follow directions which is why I made a How-To for others.
Click to expand...
Click to collapse
I'm not saying you are wrong, but I'm pretty sure he will.
Personally, I think the 2005 spl is pointless on a g1, but I flashed it ages ago and see no point reverting. There definitely is an advantage to the hardspl for non-US users though.. Some of the european people in particular need the ability to flash international images to get root in the first place.
goldenarmZ said:
I'm not saying you are wrong, but I'm pretty sure he will.
Click to expand...
Click to collapse
lol i will agree with you on that one
goldenarmZ said:
Some of the european people in particular need the ability to flash international images to get root in the first place.
Click to expand...
Click to collapse
... and do tell how you can flash the SPL ***BEFORE*** you get root....
lbcoder said:
... and do tell how you can flash the SPL ***BEFORE*** you get root....
Click to expand...
Click to collapse
"......"
I'm sure I had a point there, but until I remember what it was, I'll just hang my head and walk away quietly.
goldenarmZ said:
"......"
I'm sure I had a point there, but until I remember what it was, I'll just hang my head and walk away quietly.
Click to expand...
Click to collapse
Your point was that the Hard SPL is required to flash images from another region and you are correct.
Joe333x said:
Your point was that the Hard SPL is required to flash images from another region and you are correct.
Click to expand...
Click to collapse
Get ready for more action! I sense lbcoder cooking something up...
Joe333x said:
Your point was that the Hard SPL is required to flash images from another region and you are correct.
Click to expand...
Click to collapse
..but I can't remember why that was useful. I thought I knew when I typed it but I don't anymore.. I blame this evil beverage in my hand.
grandomegabosses said:
Get ready for more action! I sense lbcoder cooking something up...
Click to expand...
Click to collapse
http://code.google.com/p/android-roms/wiki/SPL said:
HardSPL is a modification of the Engineering SPL by cmonex. In addition to the functionality of the Engineering SPL, HardSPL also allows NBH files to be used without matching the CID (carrier ID) check. At the current time the main benefit of this is to allow European G1s flash American NBH files and vice versa.
Click to expand...
Click to collapse
http://code.google.com/p/android-roms/wiki/SPL
goldenarmZ said:
..but I can't remember why that was useful. I thought I knew when I typed it but I don't anymore.. I blame this evil beverage in my hand.
Click to expand...
Click to collapse
You typed it be lbcoder said that there is no advantage to using the Hard SPL.
Firerat said:
yes.. its safe
OE 1.2.2 needs Danger SPL, ignore what the changelog says it's wrong
http://code.google.com/p/openeclair... Type Status Priority Owner Component Summary
Click to expand...
Click to collapse
lbcoder said:
Nope. It may be broken, but that is a very minor tweak to fix.
Click to expand...
Click to collapse
OP wants OE 1.2.2 , you need danger to flash, 'bugged' OE 1.2.2 means that danger is needed, OP downgrades, OP can't flash 1.2.2 therefore no point downgrading... No point downgrading fullstop... even if not 'broken' it would still flash over Danger.
tbh OE Devs/beta testers should have at least confirmed danger was not needed by downgrading and flashing.
Firerat said:
nope .. why would you want/need to downgrade it?
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong(old) radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
Click to expand...
Click to collapse
lbcoder said:
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Click to expand...
Click to collapse
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
removed the old, is that better?
lbcoder said:
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
Click to expand...
Click to collapse
errm, Hardspl lets you flash things you wouldn't normally be able to flash, that is why Hardspl is needed..
your comments were largely pointless, you don't score any points for not full quoting me
Firerat said:
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
removed the old, is that better?
Click to expand...
Click to collapse
Don't forget that a radio flash can be included in ANY update.zip archive.
That includes the possibility of accidentally flashing a MALICIOUS system image designed to cause bricks.
And as I've said before, there is no guarantee AT ALL regarding what some future radio will be compatible with. Just because HTC has ***LATELY*** been releasing radio images compatible with both SPLs does NOT mean that this trend will continue in the FUTURE. The ONLY guarantee you have is that HTC WILL NOT release RADIO UPGRADES for DREAM that ARE NOT compatible with the STOCK 0.95.x000 SPLs.
errm, Hardspl lets you flash things you wouldn't normally be able to flash, that is why Hardspl is needed..
Click to expand...
Click to collapse
No... it doesn't.
It only lets you flash foreign NBH files.
If you have an engineering SPL, there is NO REASON AT ALL to flash NBH files!!!
In fact, if you have an engineering SPL, you SHOULD NEVER flash an NBH file because then you LOSE your ENGINEERING SPL as well as ROOT!!!!
your comments were largely pointless, you don't score any points for not full quoting me
Click to expand...
Click to collapse
Did I quote you enough this time?
lbcoder said:
Don't forget that a radio flash can be included in ANY update.zip archive.
That includes the possibility of accidentally flashing a MALICIOUS system image designed to cause bricks.
And as I've said before, there is no guarantee AT ALL regarding what some future radio will be compatible with. Just because HTC has ***LATELY*** been releasing radio images compatible with both SPLs does NOT mean that this trend will continue in the FUTURE. The ONLY guarantee you have is that HTC WILL NOT release RADIO UPGRADES for DREAM that ARE NOT compatible with the STOCK 0.95.x000 SPLs.
No... it doesn't.
It only lets you flash foreign NBH files.
If you have an engineering SPL, there is NO REASON AT ALL to flash NBH files!!!
In fact, if you have an engineering SPL, you SHOULD NEVER flash an NBH file because then you LOSE your ENGINEERING SPL as well as ROOT!!!!
Did I quote you enough this time?
Click to expand...
Click to collapse
Where on Earth would you be downloading malicious update.zips from? If you don't trust the source, you probably shouldn't try it. Also, you can open the zip and check for a radio image. And future radio images are not pushed to you anymore because you're on a custom rom. Why would you flash a random radio image you found here without other people trying it first?
Your arguments really do make sense. I'm not trying to say you don't have logical points. All I'm saying is if you use the brain, you probably won't brick your phone.
first of all, i'd like to say sorry for this stupid question.
im searching via google everything about downgrading 0013d SPL to 1.33.2005 SPL and found nothing.
so if u guys knows how to downgrade this "perfected" SPL,
please,
post it here..
I really need some guidance..
Thanks before..
Regards,
Brokenval
You should read in ezTerry's original post, there is written everything ...
(A link can be found in my signature)
AndDiSa said:
You should read in ezTerry's original post, there is written everything ...
(A link can be found in my signature)
Click to expand...
Click to collapse
letme make it clear, got some spinning bird above my head
so, after installing this 0013d SPL,
in case if i want to go back to my previous SPL (1.33.2005),
i should do this:
Dream
1) Download: orange-1.58.73.2.nbh (MD5: aca4dee0c1ece7e9773f2ecbdfbba7c0) (mirror)
2) enter fastboot and run 'fastboot flash nbh orange-1.58.73.2.nbh'
3) wait for the entire nbh to flash
4) boot into the bootloader again (it will be an engineering SPL 1.42.2000)
5) You can now re-flash the radio/hboot/recovery via fastboot that you wish to have installed.
So, wat ive got is, after flashing orange thing, now i have SPL 1.42.2000? not 1.33.0013d? So from this orange SPL i can flash radio then spl back to dangerSPL combo again?
btw im indonesian, well id like to ask u if u know ,about wats the best radio for 0013d in my area?
btw thanks a lot..
Yes, exactly, that's the procedure. A bit long way, but secure, because you are using only fastboot, no need top flash SPL and/or Radio through recovery.
About the radio in Indonesia, I don't know what's best, but as far as I know there shouldn't be any differences for different countries.
AndDiSa said:
Yes, exactly, that's the procedure. A bit long way, but secure, because you are using only fastboot, no need top flash SPL and/or Radio through recovery.
About the radio in Indonesia, I don't know what's best, but as far as I know there shouldn't be any differences for different countries.
Click to expand...
Click to collapse
NICE!!!
Thanks a lot.. ure so QUICK and FAST REPLYING!!
downloading orangeimg now..
preparing for failsafe system
btw, could u tell me wat rom i should use since in the bible there are som roms that doesnt hav overall score..
battery lifetime is the 1st one then speed then stable..
First, why do u want to downgrade? Ur current spl can gv u extra ram
For battery life and stability, I would recommend ezterry's AOSP for froyo(2.2), if u wanna try gingerbread (2.3) roms, go for AndDiSa magpie, check his signature
Gingerbread roms are not fully finished yet but they are very stable
Orang ckp radio 2708 tu elok pakai kat US, luar US elok pakai yang 2825
Sent from my HTC Dream using XDA Premium App