Related
HI to all, i'm a newbie here and this is my first time to write and ask for help here. I been read the entire forum to get all info about the wizard phone and i really like this forum here. Give me alot of info about my phone, so i hope all people here can read first before ask question.
After a long search here, i still can't find my answer so i hope someone can help me. I just install the windows vista rc1 and hack the windows mobile based device working for it and i can sync everything and install software to mobile but when i try to upgrade my rom it won't work??? it say usb not connected but its connected at all. Anyone have any idea my happen here?
Hope someone can help me out, and i really appreciate.
If you use RegEdit to add a key called "WHOS" under the HKEY_LOCAL_MACHINE/Software/Microsoft key in the registry, connect your Windows Mobile 5.0 device and go to Windows Update, a new 7.0MB update will be available that enables Windows Mobile Device Center. This should let you do the update.
I done it already, like im say i can run the windows mobile based device with no problem for sync with my phone but when i try to upgrade the rom, the rom program will say error no usb connection. hope this will make it clear. thanks for ur help.
Anyone have try on this and having a same problem like me?
nope,works fine with me. i have asus p4pe-deluxe MB with usb 2.0 and a usb cable from canon.
my only problem is i dnt have license key,so m only on 14 days trial
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
at buddy28, try to reflash it with atleast latest AKU 2.* for universal,just click ur softreset button so that the bootloader will appear again then flash with new rom(be careful though if ur not PRO)
For ArtTX, im now using the Asus Barebone T2-p computer and i have try with another computer with windows vista rc1, it also don't working. It is possible because i'm using vista rc1 not vista beta2?
I'm using Vista RC1 and I cant flash my Wizard too
hmmm.... seem like all the rom upgrade doesn't support vista RC1....thats too bad. Oh well have to switch back to windows xp.
I just want to connect so i can update to the newest swedish rom released.
And of course everything else
When i connect the usb to phone i get the alternatives "Activesync" or "disc-unit" or something like that.
I choose activesync.....it connects but after a few seconds it disconnects.
It will show up on my pc but just disconnects right after....it has always worked before.....i really don't know what to do.
Then i use the other alternative to connect.....it seems stable but it is extremely slow.....one mp3 at 3mb takes about 40minutes to upload to phone.
I have the "Official Update 1.37.401.3" installed but i want install the newer one.
Please help me.
My usb cords i have tried using is flawless....everything works.
Im running Vista Ultimate Retail.
Please help me through this ordeal....I'm almost at the point that I'm going tp buy another phone and leave htc forever
I really want this phone to work. It worked before actually...It might be when I updated with the Official Update 1.37.401.3 or exactly a few days after that my problems appeared.
REALLY NEED YOUR HELP XDA-PEOPLE!
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
poedgirl said:
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Click to expand...
Click to collapse
I don't know what bootloader is...sorry. And there was an older rom on the phone before i upgraded.
hms666 said:
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
Click to expand...
Click to collapse
Yes it is enabled.
Windows XP uses Active sync V.4.5.0
Windows Vista uses Windows Mobility center:
http://www.microsoft.com/windows/windows-vista/features/mobility-center.aspx
First check your advanced energy-settings (control panel, system)
To make sure put everything on 10 minutes, as these settings will reset as soon as your new (and faster 1.93) rom is installed.
Connect your phone and make sure you select the sync option, not the external disc option. Make a backup.
Then use an unsigned hard-spl if you have firmware 1.37 or higher. (signed won't work) http://forum.xda-developers.com/showthread.php?t=400950
When finished install the rom you like.
I Resolved It!
I managed to flash my phone with the new swedish official rom.
So I can connect now.
Thanx for helping me.
The problem seemed to be in Windows Vista...it wouldn't allow my HTC to keep beeing connected for too long
I resolved the problem on my other computer.
And I love the speed of the new rom by the way ...It gets better and better all the time.
Thanx again XDA Developers.
have same problem
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Chino68 said:
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Click to expand...
Click to collapse
I used my other computer (Win XP) to flash my htc diamond with the newest swedish rom...and now it will even work connecting to my vista computer.
Good luck with your phone
Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(
now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...
ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony
thanks now everythink is write ..
now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.
for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question
tony i need your help
I`ve installed WM 6.5 in my Qtek 9090, and when i put in dock to syncronize with my pc, said that the USB port is no longer availabile, chose another way to syncronize, or install a synchronazation software from the getting started disc... but i dont have this disk. what can i do to sync my phone with pc?
first of all, perform a hard reset by pressing power+reset+camera+record, in the menu that appears, set
Enable Kitl NO
Format Storage YES
Clear Registry Hive YES
using the camera and record buttons, confirm with the mail button.
make sure you delete older sync partnerships on your pc, you need to set up a new one.
if bot those actions did not work, try another usb port or finally flashing the rom again or maybe another rom, there are certain builds out there, that have sync issues, which one did you pick exactly?
Same problem
I have just updated a SPV M2000 to WM6.5 and cannot sync
I have tried a virgin PC running XP and this doesn't communicate. The USB connection is recognised by the PC but neither active sync works nor does the file manager recognise the PDA.
The PDA says that the USB port is a problem.
Can I still reupgrade? Maybe should I try an earlier version?
Is there a "known good" version of WM6.5 for SPV M2000?
Thanks for your help
hi and welcome to the forum.
what rom are you using (build number, chef)?
are you sure you followed the right upgrade procedure to the point? http://forum.xda-developers.com/showpost.php?p=4706441&postcount=2
especially the hard reset at the end is important and might help your case here.
yes, you will be able to upgrade/downgrade to change the rom, as long as activesync 4.5 is installed on a windows xp pc. that brings the needed driver for the device to connect, also if you can't sync.
there are many good wm6.5 roms here, just go to the blueangel rom development section and look at the different releases.
Same Problem sorted
Problem sorted.
Before you replied I tried one of the ROMs you recommended and Eureka.
This forum is really useful - thanks
I wonder if you can point me in the right direction. My real reason for upgrading the Blue Angel was to see if it would run Tom Tom Navigator 7 which needs WM6. It won't. I simply get the answer Program not for this device even though I am now running quite successfully WM6.5.
Hello!
I have a Tmobile MDA Vario 3 and the following problem:
I used my phone normally every day, and one day no ringtones are working... I can hear them choose one of the sounds, but no sound if somebody rings me...
what can it be? I dont wanna make a hardreset, because many programs on it and i dont wanna lose them...
I did a hardreset and used before sprite backup, i tested the ringtone and IT WORKS, now i put back my backup and no ringtones working now again, how can i find the mistake in the system? Can i look into the registry like normal windows too?
in another forum i saw someone means it can be the divx player, i deinstalled it, but nothings better...
I NEED HELP... what can i do?
Regards
Can't you just put the programs back on there? It's really not that hard.
ChumleyEX said:
Can't you just put the programs back on there? It's really not that hard.
Click to expand...
Click to collapse
Its too much for me...
Its an tmobile device and i putted manually the o2 internet settings in there nobody knows whats the defect on there?
Regards
I could flash and setup my Tilt in no time flat.
Ok, i will do a hardreset, but is there a ROM for the Vario 3 so that i have an original HTC ROM?
And can i flash the phone then to WM 6.5?
Do you have any links for me?
are you on a flashed non OEM rom?
I am on an original tmobile rom, and i i have to reset i wanna change to another rom like windows mobile 6.5, i have to change rom to a htc rom 6.1 and then i have to go to 6.5 right? i wanna put away tmobile settings on hardreset!
Well if you hard reset it will put the oem rom on it. Then you follow the instructions to be able to flash roms on it. Until you flash a rom on it, every time you hard reset it the factory rom will install.
Can you give me a link where i find a description what to do for this?
I wanna flash the rom to HTC WM 6.1 original, and after this i wanna install 6.5 is this the right way??
[Resources] Flashing Your First Kaiser Rom (For Noobs)
No need for interim flashes after hard-spl you can flash a 6.5 make sure you read about Radio update
Maybe you have installed some softwares. let check recent installed softs and uninstall them, then restart. No need to use other rom if you like it
If it still does not work, do hard-reset.
Goodluck