There are two small buttons (each marked with a small horizontal line) on the keyboard. The left is over the letters R and T. It is assigned to the "Send" button for email. The trouble is that it is very easy to hit by accident when typing R or T, and then the email flies off prematurely! The right one is assigned to the Menu and if you hit it by accident, it is easy to correct (just hit the OK button). Is there a way of remapping these two buttons? Except for this issue, the email with Kaiser is perfect. Does the AT&T Tilt have the same problem?
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
dscline said:
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
Click to expand...
Click to collapse
Err... I don't think this addresses the problem the OP has. I too suffer from this problem (must be big fingers!).
When using Outlook the soft keys change function so remapping the Today Calendar softkey, for example, doesn't help.
Anyone else got a solution to this problem, I'm fed up with sending half-finished e-mails!
I haven't played with AE Button Plus, but if you can assign "No Action" to a button (which some of the add-ons let you do) and do that for the messaging app specifically, then that would be a solution to the problem of large fingers/thumbs. The you could remap one of the FN keys you never use to the context menu or send...
TexasPenguin said:
Err... I don't think this addresses the problem the OP has. I too suffer from this problem (must be big fingers!).
When using Outlook the soft keys change function so remapping the Today Calendar softkey, for example, doesn't help.
Click to expand...
Click to collapse
As PerfAlbion pointed out, you can just remap them to nothing. I remapped these keys, not because of the problem with the keyboard, but simply because I never used them since it's just as easy to use the touch screen. But if you want to maintain the softkey functionality on those buttons, use AE button to map a single press to nothing, and a double-click (or even a click-hold) to the softkey function. You would then still be able to use them for their original purpose, but they wouldn't be as easy to accidentally activate.
dscline said:
As PerfAlbion pointed out, you can just remap them to nothing. I remapped these keys, not because of the problem with the keyboard, but simply because I never used them since it's just as easy to use the touch screen. But if you want to maintain the softkey functionality on those buttons, use AE button to map a single press to nothing, and a double-click (or even a click-hold) to the softkey function. You would then still be able to use them for their original purpose, but they wouldn't be as easy to accidentally activate.
Click to expand...
Click to collapse
I'm sorry, I must be missing something obvious here.
Any of the soft button remappers will NOT work on application-specific softkeys - AE ButtonPlus specifically says this in it's FAQ. Remapping the "send" key is application-specific - it only becomes the Send key when you launch Outlook. So how did you manage to re-map this key?
TexasPenguin said:
I'm sorry, I must be missing something obvious here.
Any of the soft button remappers will NOT work on application-specific softkeys...
Click to expand...
Click to collapse
The distinction is between remapping the softkey, or remapping the hardkey that correlates to the softkey. What the remappers can't do is change the function of the softkey... if, for example, Outlook is coded to make the left softkey the send key, you can't change that. That's programmed in to Outlook. But what you CAN change is whether or not the hard button that corresponds to the left softkey is recognized as the left softkey. For example, I've remapped the single press of the hard keys that correspond to the L & R softkeys to copy and paste, respectively. If I open Outlook, the soft softkey (the button on the touchscreen) is still going to be send. But my hard button is no longer mapped to be a softkey, it's mapped to be copy.
I used all the programs from the thread that you pointed out, including the cab file that was mentioned. This allowed me to change the left front soft key but does not affect the assignment of the left keyboard soft key as "Reply" when in email mode and with the keyboard slided out. Is there a way to change the left soft key assignment only for the email (eliminate the reply option) or just inactivate the left soft key altogether? I have installed the SoftKey applet form your thread in my Settings.
I sent my reply to one of the earlier messages wihout having read all the answers that came after it....I was out of the office for a couple of hours..my apologies. I will find the AE button plus and give it a try, but is there any registry solution? they usually work the best.
I downloaded and used the AE Button Plus, and it worked! I set it to double press and that did the trick. The program is very good by the way, the only one that allows multiple pressing options, etc.Many thanks!
I have benefited from this thread!
Thanks everybody.
Adequate description on the issue provided, and adequate solutions and then a follow up post.
A really appealing solution would be to isolate the keyboard softkeys from the front ones. I tried the double press method but it turned out to be incredibly annoying and I'm not sure that constant annoyance is outweighed by an accidental softkey hit on the keyboard. What I'd like to do is disable the keyboard softkeys while leaving the front ones completely intact on a single press.
I find it surprising that you even need to use the softkeys, period. I came to the Kaiser from a Smartphone edition phone (no touchscreen), which I had for for over two years. So I was completely accustomed to using the smartkeys. Yet, surprisingly, once I got the Kaiser, I found myself immediately and instinctually accessing their functionality from the touchscreen rather than the hard buttons. Perhaps because the hard buttons aren't directly under the screen like they were on my smartphone, so the tie betwee the label and the button wasn't as obvious as it was on the smartphone.
dscline said:
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
Click to expand...
Click to collapse
Thank you, AE Button Plus worked great. I just deactivated the "Left Softkey" and now I don't have to take care of that damned button anymore.
dscline said:
I find it surprising that you even need to use the softkeys, period. I came to the Kaiser from a Smartphone edition phone (no touchscreen), which I had for for over two years. So I was completely accustomed to using the smartkeys. Yet, surprisingly, once I got the Kaiser, I found myself immediately and instinctually accessing their functionality from the touchscreen rather than the hard buttons. Perhaps because the hard buttons aren't directly under the screen like they were on my smartphone, so the tie betwee the label and the button wasn't as obvious as it was on the smartphone.
Click to expand...
Click to collapse
I've been using touchscreen pocket pc's for a while and no such instinct has kicked in.
so no one has an answer besides installing that AE button plus prog on the phone?
try removing the actual key. i wouldn't try it but it may work.
I'm really glad I found this thread, I keep sending half written and blank sms messages because of the left soft and keep doing weird things because of the right one. It's gonna cost me a fortune in text messages so I'm gonna go try that prog mentioned.
It would be better for a solution more specific to the application but this is certainly better than nothing!
the best solution I can think of is:
- remove the sender name whilst creating email.
if you accidently hit send it will prompt for sender info. when you are ready to send, simply insert the contact details in and all is well.
hope this helps some of you
firstbuddha said:
the best solution I can think of is:
- remove the sender name whilst creating email.
if you accidently hit send it will prompt for sender info. when you are ready to send, simply insert the contact details in and all is well.
hope this helps some of you
Click to expand...
Click to collapse
I think we have a WINNER SOLUTION
So I down loaded this:
http://www.innovisoft.com/virtuamouse/
Free trial, seems to work as stated. it gives you a mouse pointer that the direction keys control. But I got to thinking that the fuze has a touch sensitive control pad since Gscroll works with it. If one could get them both to work together (including double tap to open) you would have a regular laptop type touch pad control of the phone then. And control it one handed to do almost everything.
Is there a way to get Gscroll to work with this?
Looks good but there are two issues for Fuze users... #1, our directional pad is too low/flat for easy side to side scrolling. #2, the price for this program + Gscroll would be over $30.. lil steep for a virtual mouse.
Maybe someone thats handy at programming would take an interest in it. Doesnt look like much codewise, as both programs (mouse pointer and gscroll) are tiny bytewise. I wouldnt care if you had to swipe 2-3 times on the small Fuze touch pad to move the pointer across the device screen. At least you could do 99% of the control of your device one handed with a thumb then. Right now I have the mouse pointer set to my end call long key press to activate/deactivate it, and using the dpad buttons is a pain, along with having to press the center button as "click". Double tap and swipe on either side of the center button would be easy to control it.
I think,that it can be very useful with adjustable sensitivity. In comparison with Omnia/i780 touchpad,Raphael's space is much more bigger,so it couldn't be a problem. I am interesting too for kind tool.
I 've tried to make it work with Gscroll, but I had no luck...
Not only that, but it disables the gscroll functions...
yzf750 said:
Maybe someone thats handy at programming would take an interest in it. Doesnt look like much codewise, as both programs (mouse pointer and gscroll) are tiny bytewise. I wouldnt care if you had to swipe 2-3 times on the small Fuze touch pad to move the pointer across the device screen. At least you could do 99% of the control of your device one handed with a thumb then. Right now I have the mouse pointer set to my end call long key press to activate/deactivate it, and using the dpad buttons is a pain, along with having to press the center button as "click". Double tap and swipe on either side of the center button would be easy to control it.
Click to expand...
Click to collapse
How did you managed to change the functions of the Long Press End key, could you help me with that, please?
Hi i have a problem with my MDA IV Compact. I searched the forums but found no answer to my problem.
I want to do some basic button remapping and so i go to settings -> personal -> buttons and guess what. There are NO buttons listed in the buttons list.
Has anyone come across this before and if so can you help me solve it? I mean there are only few hardware buttons present in diamond its a shame not to be able to map them.
Button mapping...
The only button you can map by default is the long press of the 'dial' hardware key. This should be showing in your button list as 'Button 1(Hold)'. There is an application called GScroll available here, which lets you map the four hardware keys by touch (double tapping them). Not exactly what you're after, but it's all I can think of to help you out
thats thing. i get NO buttons on my list gscroll looks nice. too bad its not free ware. but its cheap so i may get it.
you can use dredsensor
this tool allow you to remap buttons depending on running programs
No, no, no!
Diamond CAN have its call key remapped via Windows.
I had the opposite; a glitch entry appeared in the buttons list.
I am attaching a reg-file which will bring back the call button mapping. But be careful, this comes from Windows with localization patch.
Or, you can hard reset. If MDA CIV ROM creators didn't remove it intentionally, it should be there.
I would like KforTP integrated onto my Fuze keyboard, but only for the shortcut keys on the bottom, while leaving every other key alone. This would most likely involve changing the keyboard input ROM or something. I'm not sure what to do, but if anyone could make a cab adjusting those 4 keys, that would be very helpful so people who don't use the shortcut keys on the bottom don't have to activate/unactivate KforTP every time a game emulator is used. Information would also be helpful too, thanks
Hello XDA'ers,
I am wondering what the reason behind why the buttons (camera, power, green, red, etc.) in Android on HTC Vogue map to the various tasks they do? For example, the camera button is back, but why not the red button? Is this something hard set in Android and cannot be changed or did someone specifically set it up this way for a reason?
Secondly I am wondering if I create a new "keylayout file" (source.android.com/porting/keymaps_keyboard_input.html) or modify the default one in /system/usr/keylayout/qwerty.kl will I be able to change the mapping of these buttons?
Compared to the Win Mobile mapping, they button layout can take some getting used to,
but once you get used to it, it's actually a very cool layout, especially if you are right handed.
You can hold the phone in your left hand, and use your thumb to access the settings 'top button',
Use your ring-finger to always back-out or end an app
Green button for phone / initiating calls
Red button to end a call, sleep mode, or power off
I wish the d-pad had more use, but I'm always using the stylus, so barely use it.
Would love for the d-pad center key to maybe be the main power-off button.
Does_It_Matter said:
... It's actually a very cool layout.
...
I wish the d-pad had more use, but I'm always using the stylus, so barely use it.
Would love for the d-pad center key to maybe be the main power-off button.
Click to expand...
Click to collapse
I completely agree the current layout is a very cool layout indeed, but as I imagine most people on here like to tinker it may be interesting to know how to customize the button bindings.
I am not sure if its just a matter of changing the button layout file.
I looked at that qwerty.kl file in the android.tgz
It looks like its just a mapping file, and if you change the mapping, you change
buttons,
but doesn't that mean you're just re-mapping the button itself?
Not re-mapping its functionality?
I.e., if you remapped the camera button to the d-pad center, for example, then
the d-pad center would do all functions the camera button used to do,
and the camera button would do any functions the d-pad center would?
Seems like you'd actually have to change more code than just the .kl file?
i wrote this application for polaris, and with simple changes you can add the vogue setup...