[GUIDE] The Ultimate Beginner's Guide {Downgrade, Root, Partition, ADB, and MORE!} - G1 Q&A, Help & Troubleshooting

The Ultimate Beginner's Guide
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
Click to expand...
Click to collapse
Rooting your Phone
Q: What is Root?
A: Root is linux operator allowing access to all files in the file system. With root or administrative rights, developers can create or "cook" roms, get access to core files and of course create themes.
For a more detailed explanation go HERE
Q: Why Should I Root My Phone?
A: Here is a couple of reasons:
- A huge preformance boost
- Multi-Touch web browsing
- Install Apps directly to your SD Card
- Wireless and Wired Internet Tethering
- Faster Download Speeds
- Bonus Apps and Widgets from other builds
- Many many many more
Ok, since you kept reading, I think you are ready to root your phone! The only question now is HOW?!?
Check your Phone Version:
1. Go to settings
2. Press on "About Phone"
3. Scroll Down to "Firmware Version" if you have 1.5 please skip to the Rooting Your Phone part of this Guide. If you have 1.6 or higher please follow the downgrading part of the Guide.
-------------------------------------------------------------------------------------------------------------------------------
Downgrading your G1 to Cupcake 1.5
Load the DreaIMG.nbh File
1. Download the Original DreaIMG.nbh file:
Original DREAIMG.nbh
2. Extract the .zip file to get the DreamIMG.nbh file. Place the .nbh file in the root of your sd card. (root = not in any folders)
Note: Make sure your sd card is partition as FAT32 or your phone will not detect the .nbh files.
To Format:
- Load your SD card in the card reader and connect to PC.
- Make sure you back up everything on your card. a format will erase all data on the card.
- Now open “My Computer” and right click on the drive with the SD card (Warning! Make sure its the correct drive).
- Click on Format and select FAT32 on the file system drop down and click then click Start.
- Once completed, Copy your files back to the SD card and make sure the “Original DREAIMG.nbh” is at the topmost folder of your SD card.
3. Turn the phone off if it is on.
4. Turn on the phone by holding the Camera button and the End key until the bootloader screen turns on.
5. Hit the End key to start the update. DO NOT INTERUPT THIS PROCESS.
6. Once it is done, hit the trackball to restart the phone. You now are on the stock firmware RC29. You must do the next section to get back to cupcake.
Get Back to Cupcake
1. Download the cupcake update from HERE
2. Rename the .zip file to update.zip
Note: Make sure its update.zip not update.zip.zip. If you cannot update rename your file to update not update.zip
3. Turn off your phone
4. Hold the HOME key while pressing the POWER key
5. You will see a "!" which means you are in recovery
6. Open your keyboard and type alt+l to see text
7. Type alt+s to updpate
8. Congrats you have now downgraded your phone to the Cupcake 1.5 OS
-------------------------------------------------------------------------------------------------------------------------------
Rooting Your Phone
1. On your phone, Do the following,
- Go to Settings --> Applications
- Make sure Unknown source is checked ON.
THEN,
- Go to Settings --> SD Card and Phone Storage
- Click on Unmount SD Card
- Now Click Format SD Card (Make sure you backed up all your files!)
- It should remount the SD Card for you
2. Go to the Android Market on your phone and Download & Install "Linda File Manager" or "Astro File Manager" if you dont already have a file manager installed.
3. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
4. Download the Following:
FlashRec.apk
Amon Ra’s Recovery Image (12/13/09)
5. Put both files in the root of your sd card (root = not in any folders!)
7. Unplug the phone from the computer once completed
9. Open the file manager and goto SDCard and then find the FlashRec apk file and click it (If asked tell it to use Package Installer to open it. It should automatically install the apk)
10. Open the FlashRec program and click on Backup Recovery Image and wait for it to finish.
11. Once done, click on the empty text box in the FlashRec program and type:
/sdcard/recovery-RA-dream-v1.5.2.img
Then click on the Flash Custom RecoveryImage button and wait for it to finish.
12. Turn off the phone and turn it on into Recovery mode by holding down Home and Power to turn it on (keep holding until the recovery screen comes up has a bunch of text on a black background).
13. Congrats! You have rooted your phone! To keep your root, you MUST continue to the next part of this guide!
-------------------------------------------------------------------------------------------------------------------------------
Installing CyanogenMOD (Custom ROM)
1. While still in recovery scroll down and click on "USB-MS Toggle"
2. Connect your phone to your PC
3. Download the following:
- Latest CyanogenROM HERE (Download should be toward the bottom of the post)
- ADP 1.6 DRC83 Update - HERE
4. Put the .zip files you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
5. Once done, unplug your phone from your PC
6. Press HOME to disable USB-MS
7. Scroll down to "Flash ZIP from sdcard"
8. Select HTC_ADP_1.6_DRC83_rooted_base.zip and Press HOME to install
9. Once done DO NOT reboot! DO NOT!
10. Scroll down to "Flash ZIP from sdcard"
11. Select update-cm-X.X.X-signed.zip and Press HOME to install
12. Press HOME to install
13. Once Done, press on "Reboot System Now"
NOTE: Reboot will take up to 5-10 min
14. Congrats! You are now DONE!
-------------------------------------------------------------------------------------------------------------------------------
Flash the New RADIO and SPL
Q. Why do i NEED this?
A. This will give your phone more internal memory and is REQUIRED for MOST new roms! This is a requirement for ALL Hero ROMS
NOTE: Please read carefully before flashing! This could BRICK your phone!!!
1. Check if you have a PVT or DVT board
a. Power off your phone and enter bootloader (Camera + Power)
b. Check look at the top and see if it says PVT of DVT
2. If you have a DVT board YOU CANNOT CONTINUE BECUASE THIS WILL BRICK YOUR PHONE!
3. For all you luck PVT board people Download the following:
OTA Radio Update - HERE
Danger SPL - HERE
Latest CyanogenMOD - HERE
4. Rename ota-radio-2_22_19_26I.zip to Radio.zip. Rename spl-signed.zip to SPL.zip. Rename update-cm-4.0.1-signed.zip to ROM.zip
5. Place the 3 renamed files at the ROOT of your SD Card
6. Enter Recovery (Home + Power)
7. Scroll down and press on "Apply any zip from sd"
8. Press on Radio.zip
9. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
10. It will reboot back to recovery. Once it does, Scroll down and press on "Apply any zip from sd"
11. Press on SPL.zip
12. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
13. It will NOT reboot into recovery. Your phone will be stuck on the G1 screen. Once it gets there, reboot your phone by pressing Talk+Menu+Power and then hold the HOME button to enter back into recovery.
14. Scroll down and press on "Apply any zip from sd"
15. Press on ROM.zip and let it install.
16. Reboot your phone to finish.
-------------------------------------------------------------------------------------------------------------------------------
Partition your SD Card to have EXT3 and Swap
Q. What is partitioning?
A. This breaks up your sd card to 3 file systems. Allowing apps to be stored on your SD Card
Q. What is EXT2/3/4?
A. EXT is a filesystem that is only read by a linux OS such as Android. This allows apps to be stored on the SD Card
Q. What is SWAP?
A. Swap is a space on your SD Card that the phone will use as "fake" internal RAM allowing for a major speed increase
1. Backup all your files!
2. Power off your phone
3. Boot into recovery (Hold HOME while holding the POWER button)
4. Scroll down to Partition SD CARD in the recovery menu and press on it
5. Click on Partition SD
6. In the menu, it will ask for you to input two numbers. Swap, then EXT space.
Enter the following:
- SWAP: 96 MB
- EXT: 512 MB
- FAT32: Rest of SD Card
7. Once done go back to the Partition SDcard menu
8 Click on SD:ext2 to ext3
9. Press HOME to confirm
10. Once done, you need to install your current ROM to enable auto apps2sd and swap
11. Download your currently used rom
- Latest CyanogenMOD - HERE
12. Put the .zip file you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
13. Once done, unplug your phone from your PC
14. Press HOME to disable USB-MS
15. Scroll down to "Flash ZIP from sdcard"
16. Select update-cm-X.X.X-signed.zip and Press HOME to install
17. Press HOME to install
18. Once Done, press on "Reboot System Now"
19. Congrats! You are now done!
-------------------------------------------------------------------------------------------------------------------------------
Installing a Theme
1. Download your favorite theme
- XDA Theme Forum - HERE
NOTE: Make sure you know that the theme is ment for your currently install rom
2. Put the .zip file you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
3. Once done, unplug your phone from your PC
4. Press HOME to disable USB-MS
5. Scroll down to "Flash ZIP from sdcard"
6. Select "themeExampleX.zip" and Press HOME to install
7. Press HOME to install
8. Once Done, press on "Reboot System Now"
9. Enjoy your newly themed ROM
-------------------------------------------------------------------------------------------------------------------------------
Factory Reset Your Phone (Data + Cache WIPE)
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to WIPE and click it
4. Click on "Wipe data/factory reset"
5. Press HOME to continue
6. Reboot your phone once done
-------------------------------------------------------------------------------------------------------------------------------
Full SD Card WIPE (EXT, DATA, Dalvik-Cache)
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to WIPE and click it
4. Click on "Wipe data/factory reset"
5. Press HOME to continue
6. repeat steps 3, 4, and 5 for "WIPE Dalvik-Cache" and "WIPE SD:ext partition"
6. Reboot your phone once done
-------------------------------------------------------------------------------------------------------------------------------
Donate
Hey guys, if you think my Guides have helped you and in general are very helpful, please considering Donating!
Like My Guide(s)? Donate
-------------------------------------------------------------------------------------------------------------------------------

Backup/Restore your phone (Includes EXT Partition)
Backup:
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to "backup/restore" and click it
4. Click on "Nand + ext backup"
5. Press HOME to continue
6. This will take 5-10 min to finish
Restore:
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to "backup/restore" and click it
4. Click on "Nand Restore"
5. Press HOME to continue
6. This will take 5-10 min to finish
-------------------------------------------------------------------------------------------------------------------------------
ADB and FASTBOOT
Q. What is ADB?
A. ADB is a source tool for developers and avid android modders such as yourself to access the commands prompt of your phone through your PC. This allows full access to your phone through your computer which makes moving, installing, removing, and replacing files on your phone MUCH faster
Q. What is fastboot?
A. Similar to ADB, this allows you in flash a while img to any partition in your phone, including recovery, system, and user-data.
To setup ADB and Fastboot, please follow my very detailed guide found HERE
-------------------------------------------------------------------------------------------------------------------------------
Difference between a Boot-Loop, Semi-Brick, and a full Brick
Boot-Loop
Q. What is a Boot-Loop?
A. A boot loop is when your phone is stuck on the "ANDROID" screen when u first boot your phone (after the G1 screen or the My Touch screen). This occurs when something you have flashed went bad or interfeared with something you already had installed.
Solution:
1. Turn off your phone
2. Enter Recovery (Hold HOME while holding the POWEr button)
3. Choose from the following:
- Install a rom you KNOW works. Such as the latest cyanogenROM or the rom you have been preivously using
or
- Make a full wipe of your SD Card an phone and flash your update again
Semi-Brick
Q. What is a Semi-Brick?
A. A Semi-Brick is when your phone wont boot at all. The only thing is, you still have access to the recovery and/or fastboot menu
Solution:
1. Turn off your phone
2. Enter Recovery (Hold HOME while holding the POWEr button)
3. Choose from the following:
- Install a rom you KNOW works. Such as the latest cyanogenROM or the rom you have been preivously using
or
- Make a full wipe of your SD Card an phone and flash your update again
Brick
Q. What is a Brick?
A. A Brick is when your phone wont boot at all. This time, you DO NOT have access to the recovery AND fastboot menu. Basically, your phone is a paper weight.
Solution:
You can try this fix here which requires a Donor G1 to work:
HERE
OR
Try to get a new phone.
-------------------------------------------------------------------------------------------------------------------------------
Donate
Hey guys, if you think my Guides have helped you and in general are very helpful, please considering Donating!
Like My Guide(s)? Donate
-------------------------------------------------------------------------------------------------------------------------------
Additions and Questions
- If you think I should add anything to this guide or have any feedback please post it here!
- You can always PM me with questions or even post them here. I would be very glad to help!
-------------------------------------------------------------------------------------------------------------------------------
Credits
- Cyanogen
- Amon_RA
- XDA Community
- Anyone else who i am forgeting
-------------------------------------------------------------------------------------------------------------------------------

saved for future additions

saved for another future posting that i might need

When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?

rpdiddy11 said:
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
Click to expand...
Click to collapse
......Android opens .apks, you would need androzip to extract a zip file. Linda will only open .apks to install..

Nicely done, as usual.

Would this guide be the same if I was using Super D as the rom?

hiddengopher said:
Would this guide be the same if I was using Super D as the rom?
Click to expand...
Click to collapse
ya u can use any rom that has root enabled.

rpdiddy11 said:
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
Click to expand...
Click to collapse
u need to unzip the file on your computer and only place the .apk files on ur sd card
edit: It doesnt even come in a .zip
Download it here
http://zenthought.org/system/files/asset/2/flashrec-1.1.3-20091107-2.apk
Place on SD and install through linda or any file manager.

Force close
Hey so I did the whole then and it worked mint thank you very much. But one hiccup every time I open something from the original Google install like contacts or market it force closes the app. Any idea on whats going on??

Help please!
why does my G1 get stuck on D" blue android logo? i can't load it. omfg guys please help. I'm in a state of panick here.
I just installed D' latest cm and D' drc83 thingy i just skipped D" upgrade to cupcake part. omg i'm really really panick right now
help please RASAP!

OMG
OMG I"M FINALLY ABLE TO LOAD but why can't i load my 3G settings? D' apn is set by default and all but why can't i use it?
please help me really please

snOwrOse said:
why does my G1 get stuck on D" blue android logo? i can't load it. omfg guys please help. I'm in a state of panick here.
I just installed D' latest cm and D' drc83 thingy i just skipped D" upgrade to cupcake part. omg i'm really really panick right now
help please RASAP!
Click to expand...
Click to collapse
No need to panic. As long as you can access the Blue Android Logo, you are fine.
Please list, step by step, what you did (including ROM Version Numbers).
Also - you might want to try flashing/wiping your phone. That seems to take care of many issues, but I'd still like to see what you did.

elitemonkie said:
Hey so I did the whole then and it worked mint thank you very much. But one hiccup every time I open something from the original Google install like contacts or market it force closes the app. Any idea on whats going on??
Click to expand...
Click to collapse
Best guess would to be to wipe and try again.

a little help!
guys why can't i download apps from market place after following this guide? It keep saying forces close i just can't download any apps at all however i can browse them.
Anywhere to find apk. file apps or any solution please?
Some help here guys!
Thanks! appreciated!

Well I fixed it but I installed Dwangs OS and works mint.

because my Phone had PVT i updated everything... and then i would reboot at the end after installing the ROM and it will not boot... it gets stuck at the T-Mobile G1 Logo... is there anyway to fix this?
Cheers...

ElChibo said:
because my Phone had PVT i updated everything... and then i would reboot at the end after installing the ROM and it will not boot... it gets stuck at the T-Mobile G1 Logo... is there anyway to fix this?
Cheers...
Click to expand...
Click to collapse
Depends, can you get into recovery or bootloader?

JAguirre1231 said:
Depends, can you get into recovery or bootloader?
Click to expand...
Click to collapse
i can get into recovery mode.. i have been trying to reflash.. but no matter what.. i get stuck on The G1 screen...

Related

Not bricked but surely a mess....

Hello there.
I am a happy G1 owner for 3 days now
I ordered it from ebay because here in Greece it never came officially..
So I've orderder a used, already rooted and with another ROM
from JesusFreke.
I wanted to install the latest CM ROM so,
I downloaded the 4.2.5 CM ROM and the 1.6 Recovery from Android dev.
I placed them in sdcard and got into recovery mode.
I realised that I cannot use any zip file but I got only 3 options,
wipe cache
wipe everything
run update.zip
And then I did something stupid...
I renamed the recovery file into update.zip with the thought
that when I reboot again, I will press to install update.zip
and then the recovery will be installed. Then I thought to do
the same with the CM ROM.
But, ouch, the custom ROM disappeared, and now
when I go to see the information in the Settings I got this:
Firmware version: 1.6
Baseband version: 62.50S.20.17H_2.22.19.26I
Kernel version: 2.6.29-00479-g3c7df37
[email protected] #19
Build number:
dream_devphone-userdebug 1.6 DRC83 14721 test-keys
And still except the mess I cannot select any .zip files
to execute from recovery mode...
And of course I don't know what to do to install another ROM
or return to a factory default.
The phone is functioning, Market, calls, camera, everything
but I don't know how exactly to "fix" the recovery mode
so I could give it another try...
I don't know if this helps
but I got this message in recovery mode:
cannt open /cache/recovery/command
Any ideas / howtos / fix for this ? I tried search
but I didnt find something similar...
im gonna be lazy
Flash Android 1.6 & CyanogenMod 4.2.5/4.1.9999
You will now install the actual OS of the phone. First you will install the legal Google apps, and then you will install CyanogenMod on top of those apps.
1. Turn your phone off.
2. Hold the Home button while booting to get to Recovery mode.
3. If you wish to have an option to return to your factory settings, select nandroid backup now. If not, continue.
4. Press Alt-W (or select "wipe data/factory reset")Press home to confirm
5. Press Alt-A (or select "apply any zip from sd")
* Dream (G1): signed-dream_devphone_userdebug-ota-14721.zip
* Magic32A / Magic32B (MyTouch): See This Page
6. Press home to confirm and let installation complete
7. STOP - DO NOT REBOOT YOUR PHONE
8. Once again, press Alt-A (or select "apply any zip from sd")
* Dream (G1): update-cm-4.2.5-signed.zip
* Magic32A / Magic32B (MyTouch): See This Page
9. Press home to confirm and let installation complete
10. When this is complete, reboot your phone by pressing Home & Back.
11. Wait. Your phone will say writing radio image and then reboot. This will take a couple of minutes. Be patient!
12. If the phone enters Recovery mode after rebooting, press Home & Back again to reboot it once more. You should see the blue CyanogenMod Android logo this time.
directly from here
http://wiki.cyanogenmod.com/index.p..._Android_1.6_.26_CyanogenMod_4.2.5.2F4.1.9999
Yes, I was there,
and if you see I cannot do this:
5. Press Alt-A (or select "apply any zip from sd")
because it isn't in the list....
So as I said, I tried to rename the .zip to update.zip,
execute it and then a mess...
Ace42 said:
im gonna be lazy
Flash Android 1.6 & CyanogenMod 4.2.5/4.1.9999
You will now install the actual OS of the phone. First you will install the legal Google apps, and then you will install CyanogenMod on top of those apps.
1. Turn your phone off.
2. Hold the Home button while booting to get to Recovery mode.
3. If you wish to have an option to return to your factory settings, select nandroid backup now. If not, continue.
4. Press Alt-W (or select "wipe data/factory reset")Press home to confirm
5. Press Alt-A (or select "apply any zip from sd")
* Dream (G1): signed-dream_devphone_userdebug-ota-14721.zip
* Magic32A / Magic32B (MyTouch): See This Page
6. Press home to confirm and let installation complete
7. STOP - DO NOT REBOOT YOUR PHONE
8. Once again, press Alt-A (or select "apply any zip from sd")
* Dream (G1): update-cm-4.2.5-signed.zip
* Magic32A / Magic32B (MyTouch): See This Page
9. Press home to confirm and let installation complete
10. When this is complete, reboot your phone by pressing Home & Back.
11. Wait. Your phone will say writing radio image and then reboot. This will take a couple of minutes. Be patient!
12. If the phone enters Recovery mode after rebooting, press Home & Back again to reboot it once more. You should see the blue CyanogenMod Android logo this time.
directly from here
http://wiki.cyanogenmod.com/index.p..._Android_1.6_.26_CyanogenMod_4.2.5.2F4.1.9999
Click to expand...
Click to collapse
honestly...do you even read?
Chris, you booted off of the ADP Recovery Image which your not supposed to
http://forum.xda-developers.com/showthread.php?t=568171
Please follow the thread, particularly post 10
Your recovery is placed back to ADP stock. It needs to be upgraded back to Cyan 1.4/RA1.3.2
If you need anymore help, post back.
B-man007 said:
honestly...do you even read?
Chris, you booted off of the ADP Recovery Image which your not supposed to
http://forum.xda-developers.com/showthread.php?t=568171
Please follow the thread, particularly post 10
Your recovery is placed back to ADP stock. It needs to be upgraded back to Cyan 1.4/RA1.3.2
If you need anymore help, post back.
Click to expand...
Click to collapse
oops my bad dont need to be harsh i assumed he had amon ra 1,2,3 rec...
Thanks for the help, I really appreciate that and
sorry for this (mess), sleep issues + n00b in this ...section (G1) (...)
I'll give it a try and I'll update this.
I know this issue is solved, but I have a question. Could he have just flashed like cyanogen 4.0.4 and then flash a new recovery like amon_ra etc? Then started over?
I was in ...panic mode. After a coffee break I fixed it.
Booting into linux, downloaded sdk tools, adb and fastboot
and then I followed the directions in:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_ADP1_Firmware_to_CyanogenMod
Step by Step.
All solved, I have installed the Cyanogen recovery and the latest ROM
/me happy again starts playing around with more funny stuff
haha ok well at least you got it working
@psychopomp
If the ADP recovery flashed, the stock ADP recovery would be flash upon every boot.
@b-man007
Thanks, good info to know.

Help with SPL

I've actually been needing help with the guide for avoiding a brick on the G1.
I don't really know what the update file of the build I'm currently using is.
If it's the CynogenMod file then I should be good.
Also, when I do install the SPL and then the mod, it hangs on the G1 screen for a long time.
It doesn't even continue to the Android screen.
I can boot into recovery and everything. . . but I can't get past the G1 screen.
Help please.
Thanks.
I used this guide to install the new radio and SPL by the way.
Flash the New RADIO and SPL
Q. Why do i NEED this?
A. This will give your phone more internal memory and is REQUIRED for MOST new roms! This is a requirement for ALL Hero ROMS
NOTE: Please read carefully before flashing! This could BRICK your phone!!!
1. Check if you have a PVT or DVT board
a. Power off your phone and enter bootloader (Camera + Power)
b. Check look at the top and see if it says PVT of DVT
2. If you have a DVT board YOU CANNOT CONTINUE BECUASE THIS WILL BRICK YOUR PHONE!
3. For all you luck PVT board people Download the following:
OTA Radio Update - HERE
Danger SPL - HERE
Latest CyanogenMOD - HERE
4. Rename ota-radio-2_22_19_26I.zip to Radio.zip. Rename spl-signed.zip to SPL.zip. Rename update-cm-4.0.1-signed.zip to ROM.zip
5. Place the 3 renamed files at the ROOT of your SD Card
6. Enter Recovery (Home + Power)
7. Scroll down and press on "Apply any zip from sd"
8. Press on Radio.zip
9. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
10. It will reboot back to recovery. Once it does, Scroll down and press on "Apply any zip from sd"
11. Press on SPL.zip
12. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
13. It will NOT reboot into recovery. Your phone will be stuck on the G1 screen. Once it gets there, reboot your phone by pressing Talk+Menu+Power and then hold the HOME button to enter back into recovery.
14. Scroll down and press on "Apply any zip from sd"
15. Press on ROM.zip and let it install.
16. Reboot your phone to finish.
Click to expand...
Click to collapse
Just flash a rom. Job done

[FIXED] [Q] help! Trying to upgrade android 2.1 to 2.2 on Optus SGS

Hi all,
I'm a beginner to this stuff, so please bear with me. I've gotten an SGS from Optus here in Australia, with Android 2.1. I want to upgrade to 2.2, so here I am on these forums
I confirmed that there was no 3-button combo mode on this SGS, and have successfully installed the fix as detailed here: http://forum.xda-developers.com/showthread.php?t=785201 (a much more painful process than I thought, having to get a hold of a Windows computer (wasn't comfortable using Windows in a VM to flash my phone, couldn't figure out how to get the 3-button on my SGS with Hiemdall), get the USB drivers from the Android SDK, install Java, stab self with spoon, etc)
Now I've gotten the 3-button combo on the phone, I have read through the FAQ thread (http://forum.xda-developers.com/showthread.php?t=723596) and the thread on the newest ROM(?) Doc BUJP8 (http://forum.xda-developers.com/showthread.php?t=817703).
Bearing in mind that I have never done this before, what the heck do I do next? I tried putting the BUJP8 file (BUJP8_Doc_V9.zip, renamed to update.zip) on the phone storage in a folder titled 'sdcard', rebooted with ADB and got told that the phone couldn't extract the update.zip file. Is that correct? Do I need any other files to update my phone from 2.1 to 2.2?
Edit: The phone tells me "E:Can't open /sdcard/update.zip (No such file or directory) Installation aborted."
I'm rather frustrated and grumpy I know that I'm missing something, so if you can please let me know what to do next, that would be excellent!
From the threads installation instructions. This rom works fine on Optus (I'm using it as well) with Dark Theme.
BTW, don't rename the Doc ROM to update.zip. You need to use the clockwork file as update.zip (see below)
Good luck
Installation Steps (Read this very carefully!)
01. Download the ROM (which you seem to already have downloaded) and put it on your internal sdcard.
02. Download clockworkmod recovery from here: http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-galaxys.zip
You *need* Clockworkmod, this won’t work with stock recovery.
03. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
*SKIP THIS STEP AS YOU'RE COMING FROM AN OFFICIAL OPTUS ROM WITH NO TWEAKS*
04. If you had Voodoo installed prior to installing this ROM (Eclair or Froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
05. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
06. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
07. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
08. Select “choose zip from sdcard” and then select the ROM zip package. Then choose yes.
09. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
11. After the phone boots up, shutdown phone again, and then boot into recovery. The phone will boot DIRECTLY into Clockworkmod. From there, select "advanced ULK features", then "Lagfix options". You can select any of the lagfix schemes (description here). I recommend NO-RFS advanced EXT4 (others are known to have issues and may cause loss of data)
Click to expand...
Click to collapse
Woot! All working now The trick I hadn't worked out from all the instructions was to put the update.zip file in the root of the phone storage as seen by Windows, as it wasn't clear if I should have created a folder called 'sdcard' and putting update.zip there or not.
So once I worked out that putting update.zip in the root of the phone storage was the correct thing to do, I could finally get the recovery mode and have the phone successfully see 'update.zip'!
The phone has booted, and I've shut it down and gone back to clockwork, but there isn't a 'NO-RFS advanced EXT4' option for lagfix - the closest is 'NO-RFS advanced (a=e4)' - is this the EXT4 option, just badly rendered?
daehenoc said:
The phone has booted, and I've shut it down and gone back to clockwork, but there isn't a 'NO-RFS advanced EXT4' option for lagfix - the closest is 'NO-RFS advanced (a=e4)' - is this the EXT4 option, just badly rendered?
Click to expand...
Click to collapse
Good to hear you got it sorted.
And yes. That's the right EXT4 option
try this
http://webtrickz.com/how-to-update-...oid-2-2-froyo-via-kies-anywhere-in-the-world/
I did

[Q] Can't 'install zip from sd card' Help!

Hi all,
I've got a Samsung Galaxy S I9000, but I don't have the stock Live Wallpapers.
Now I wanna install/do this:
"First place SamsungLWP.zip on the root of your SDcard (plug your phone into your computer and transfer the samsungLWP.zip to your phone's sdcard)
1. Go into rom manager and reboot into recovery
2. scroll down to install zip from sd card and press the power button
3. scroll down choose zip from SD card again hit power button
4. highlight signed SamsungLWPs.zip
5. Hit power button
6. Go back until you get to the reboot option I think back twice Reboot phone
7. go to personalize in setting options select htc wallpapers select live wallpapers and pick one to enjoy one"
I can't do the 2nd step, because there is no choice to select 'install zip from sd card'.
Can anybody help me?
I've got the stock rom (Froyo) and the phone is rooted.
Help would be appreciated
Koen
nobody?, I really need this now
did you fetch cwm?
The instructions assume you have CWM recovery (or a similar tool) on your phone.
In order to install programs in this manner you have to get CWM recovery. (search for rom manager in market and flash cwm (it's the first option from the top),
then again, I'm assuming you're getting this since you're still on 3e (the recovery most galaxy s phones come with). What I'd like you to do is get your phone into recovery mode and tell me what the very first line on the top says.
Hi,
The first line says: 'Android system recovery <3e>'
theres your problem you need recovery 2e
search for CWM in either update.zip or Flashable Odin version like cf-root.
if you get the update.zip version you need to put it on the root of your internal sd card, boot into recovery and select apply:update.zip you will need to do this twice... then CWM will appear and let you flash unsigned zip files.
if you use odin version just flash it in download mode and when you next boot you will have 2e recovery.
I just fixed it, I did put the 'data/app' folder onto my phone, and installed it, and it worked.
Thx everyone
There's your problem
You currently do not have the option to install (most) zip files from recovery. If you do want this option it is very possible and not too complicated(although this might void warranty) please read the forum guide on how to get CWM (clockworkmod)
I'm having a similar problem, but azzledazzle's suggestion left me a little baffled. I've got rom manager installed, Clockworkmod flashed and all that good stuff, but I'm still not able to install new roms. Now, I'm just about to try recovery mode, and...
Yes, 3e.
But how do I find a 2e thingie? Imagine I'm a gigantic moron who can put things in folders, but that's about it. I apologise for the pathetic help request, but if there's anyone...
Any help guys?thanks
Also having problems installing from sd
* edit*
Nvm
Listen..I have a HTC One V and when I go in recovery mode it says E:Can't open...Then when i press Vol Up + Power Button a list of commands pops up but there is nothing saying install zip from SD card..And now it's stuck at the htc one screen i can't start it up \_/
can it work for i9300 ?
koenster said:
Hi all,
I've got a Samsung Galaxy S I9000, but I don't have the stock Live Wallpapers.
Now I wanna install/do this:
"First place SamsungLWP.zip on the root of your SDcard (plug your phone into your computer and transfer the samsungLWP.zip to your phone's sdcard)
1. Go into rom manager and reboot into recovery
2. scroll down to install zip from sd card and press the power button
3. scroll down choose zip from SD card again hit power button
4. highlight signed SamsungLWPs.zip
5. Hit power button
6. Go back until you get to the reboot option I think back twice Reboot phone
7. go to personalize in setting options select htc wallpapers select live wallpapers and pick one to enjoy one"
I can't do the 2nd step, because there is no choice to select 'install zip from sd card'.
Can anybody help me?
I've got the stock rom (Froyo) and the phone is rooted.
Help would be appreciated
Koen
Click to expand...
Click to collapse
pls can you send the file to me [email protected]
Obviously you need to flash the latest custom recovery CWM. After that flashing zip will work.
Sent from my GT-I9001 using xda premium

[Q] Help with ROOT or New Rom?

So these are the steps I did, I HAVE A CUSTOM RECOVERY, AND BOOTLOADER MY BOOTLOADER SAYS SERIAL10. I have done a backup in recovery in the telnet app I type su and I still have no root access. I have installed UniversalAndroot-1.6.2-beta5.apk on the phone but the program crashes. so I guess root is stopping me at this point. I am trying to upgrade the original rom with a new build and a stable 1 any ideas also........ THANKS IN ADVANCED"
The phone looks not to be rooted yet I went step by step.
LOWER BUILD
Preparing to Get Root on your Phone
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29. Copy the DREAIMG.nbh file to the SD card. (RC29 for US)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry boot loader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
Rooting your RC29:
Instructions:
1. Download recovery-RA-dream-v1.5.2.img and copy it to your SD card
2. Download the Hard SPL and copy the zip file to the SD card.
3. All files must be on the root of your SD card.
4. Restart your phone. Wait for your phone to start up fully and show the home screen.
5. After your phone starts up, hit the enter key twice, type "telnetd" and press enter.
6. Download an Android "Telnet" application from the Market and connect to localhost.
7. If you connect successfully, you will have a root prompt "#".
8. Type the following into Telnet (these commands will give you root access easier in the future):
* mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
* cd sdcard
* flash_image recovery RA-dream-v1.7.0.img
* cat recovery.img > /system/RA-dream-v1.7.0.img
1. Power off your phone.
2. Start up in recovery mode by holding home and pressing power.
3. You will now enter recovery mode. You should see an exclamation.
4. If you do not see a menu on screen, press Alt-L to show the menu.
5. Press Alt-S to apply the update from the SD card.
6. After the update is complete, hold Home and press Back to restart.
7. REBOOTS BACK INTO RECOVERY.
If you want to root try a easy method!
Only Download UniversalAndroot and copy it on your sdcard!
Then open it with a Filemanager and install it!
After open the app and click on root and wait!
After this you device is rooted!
the way i rooted my g1 was very simple all you have to do is pay close attention to this video. http://www.youtube.com/watch?v=DR0HpUVv-BY you'll notice in the video description there is another link on how to get your firmware from 1.6 to 1.5 (must do this first)
(there's a newer version of AmonRA 1.0.7) http://forum.xda-developers.com/showthread.php?t=566669
if you have any trouble figuring this out i will help you step by step jus send me an e-mail to [email protected] so i can answer your questions faster! but honestly its very simple jus pay close attention.
(Optional) also there is the new radio 2.22.28.25 and hboot 1.33.0013d which makes your phone run much faster and allows you to get an extra 14mb on your ram.
the only thing to be careful with is flashing certain froyo roms you need to flash a 2708/2825 kernel with it for it to flash correctly also with some hero/sense roms.
the link to the kernel (froyo) is: http://forum.xda-developers.com/show...&postcount=670
and to get your g1 to the new radio and hboot follow this link http://forum.xda-developers.com/showthread.php?t=831139 this step is tricky but again if you pay close attention you shouldnt have any issues.
at this point you should be free to start flashing some cool roms!! 2 of my personal favorites are FroyobyLazlo: http://forum.xda-developers.com/showthread.php?t=929678 and zachattack052 & xillius200's 2.1&1.5Hero: http://forum.xda-developers.com/showthread.php?t=670414
Happy flashing and good luck! hope this helped you out..
If anything happened and you dont wanna risk bricking your phone you can always Un-Root and get back to stock firmware by following this link http://forum.xda-developers.com/showthread.php?t=491350
at this point you will be back to original stock 1.0 firmware, from here you can either wait for the normal system update to show up which could take up to 24 hours, or if your impatient like me you can manually install the updates to get back to 1.6, i forget where i got the files for the updates and i dont know how to put file links in these posts so you can also email me and i will send you the zip files via e-mail [email protected]

Categories

Resources