Database Develop

[GUIDE] The Ultimate Beginner's Guide {Downgrade, Root, Partition, ADB, and MORE!}

The Ultimate Beginner's Guide
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
Click to expand...
Click to collapse
Rooting your Phone
Q: What is Root?
A: Root is linux operator allowing access to all files in the file system. With root or administrative rights, developers can create or "cook" roms, get access to core files and of course create themes.
For a more detailed explanation go HERE
Q: Why Should I Root My Phone?
A: Here is a couple of reasons:
- A huge preformance boost
- Multi-Touch web browsing
- Install Apps directly to your SD Card
- Wireless and Wired Internet Tethering
- Faster Download Speeds
- Bonus Apps and Widgets from other builds
- Many many many more
Ok, since you kept reading, I think you are ready to root your phone! The only question now is HOW?!?
Check your Phone Version:
1. Go to settings
2. Press on "About Phone"
3. Scroll Down to "Firmware Version" if you have 1.5 please skip to the Rooting Your Phone part of this Guide. If you have 1.6 or higher please follow the downgrading part of the Guide.
-------------------------------------------------------------------------------------------------------------------------------
Downgrading your G1 to Cupcake 1.5
Load the DreaIMG.nbh File
1. Download the Original DreaIMG.nbh file:
Original DREAIMG.nbh
2. Extract the .zip file to get the DreamIMG.nbh file. Place the .nbh file in the root of your sd card. (root = not in any folders)
Note: Make sure your sd card is partition as FAT32 or your phone will not detect the .nbh files.
To Format:
- Load your SD card in the card reader and connect to PC.
- Make sure you back up everything on your card. a format will erase all data on the card.
- Now open “My Computer” and right click on the drive with the SD card (Warning! Make sure its the correct drive).
- Click on Format and select FAT32 on the file system drop down and click then click Start.
- Once completed, Copy your files back to the SD card and make sure the “Original DREAIMG.nbh” is at the topmost folder of your SD card.
3. Turn the phone off if it is on.
4. Turn on the phone by holding the Camera button and the End key until the bootloader screen turns on.
5. Hit the End key to start the update. DO NOT INTERUPT THIS PROCESS.
6. Once it is done, hit the trackball to restart the phone. You now are on the stock firmware RC29. You must do the next section to get back to cupcake.
Get Back to Cupcake
1. Download the cupcake update from HERE
2. Rename the .zip file to update.zip
Note: Make sure its update.zip not update.zip.zip. If you cannot update rename your file to update not update.zip
3. Turn off your phone
4. Hold the HOME key while pressing the POWER key
5. You will see a "!" which means you are in recovery
6. Open your keyboard and type alt+l to see text
7. Type alt+s to updpate
8. Congrats you have now downgraded your phone to the Cupcake 1.5 OS
-------------------------------------------------------------------------------------------------------------------------------
Rooting Your Phone
1. On your phone, Do the following,
- Go to Settings --> Applications
- Make sure Unknown source is checked ON.
THEN,
- Go to Settings --> SD Card and Phone Storage
- Click on Unmount SD Card
- Now Click Format SD Card (Make sure you backed up all your files!)
- It should remount the SD Card for you
2. Go to the Android Market on your phone and Download & Install "Linda File Manager" or "Astro File Manager" if you dont already have a file manager installed.
3. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
4. Download the Following:
FlashRec.apk
Amon Ra’s Recovery Image (12/13/09)
5. Put both files in the root of your sd card (root = not in any folders!)
7. Unplug the phone from the computer once completed
9. Open the file manager and goto SDCard and then find the FlashRec apk file and click it (If asked tell it to use Package Installer to open it. It should automatically install the apk)
10. Open the FlashRec program and click on Backup Recovery Image and wait for it to finish.
11. Once done, click on the empty text box in the FlashRec program and type:
/sdcard/recovery-RA-dream-v1.5.2.img
Then click on the Flash Custom RecoveryImage button and wait for it to finish.
12. Turn off the phone and turn it on into Recovery mode by holding down Home and Power to turn it on (keep holding until the recovery screen comes up has a bunch of text on a black background).
13. Congrats! You have rooted your phone! To keep your root, you MUST continue to the next part of this guide!
-------------------------------------------------------------------------------------------------------------------------------
Installing CyanogenMOD (Custom ROM)
1. While still in recovery scroll down and click on "USB-MS Toggle"
2. Connect your phone to your PC
3. Download the following:
- Latest CyanogenROM HERE (Download should be toward the bottom of the post)
- ADP 1.6 DRC83 Update - HERE
4. Put the .zip files you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
5. Once done, unplug your phone from your PC
6. Press HOME to disable USB-MS
7. Scroll down to "Flash ZIP from sdcard"
8. Select HTC_ADP_1.6_DRC83_rooted_base.zip and Press HOME to install
9. Once done DO NOT reboot! DO NOT!
10. Scroll down to "Flash ZIP from sdcard"
11. Select update-cm-X.X.X-signed.zip and Press HOME to install
12. Press HOME to install
13. Once Done, press on "Reboot System Now"
NOTE: Reboot will take up to 5-10 min
14. Congrats! You are now DONE!
-------------------------------------------------------------------------------------------------------------------------------
Flash the New RADIO and SPL
Q. Why do i NEED this?
A. This will give your phone more internal memory and is REQUIRED for MOST new roms! This is a requirement for ALL Hero ROMS
NOTE: Please read carefully before flashing! This could BRICK your phone!!!
1. Check if you have a PVT or DVT board
a. Power off your phone and enter bootloader (Camera + Power)
b. Check look at the top and see if it says PVT of DVT
2. If you have a DVT board YOU CANNOT CONTINUE BECUASE THIS WILL BRICK YOUR PHONE!
3. For all you luck PVT board people Download the following:
OTA Radio Update - HERE
Danger SPL - HERE
Latest CyanogenMOD - HERE
4. Rename ota-radio-2_22_19_26I.zip to Radio.zip. Rename spl-signed.zip to SPL.zip. Rename update-cm-4.0.1-signed.zip to ROM.zip
5. Place the 3 renamed files at the ROOT of your SD Card
6. Enter Recovery (Home + Power)
7. Scroll down and press on "Apply any zip from sd"
8. Press on Radio.zip
9. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
10. It will reboot back to recovery. Once it does, Scroll down and press on "Apply any zip from sd"
11. Press on SPL.zip
12. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
13. It will NOT reboot into recovery. Your phone will be stuck on the G1 screen. Once it gets there, reboot your phone by pressing Talk+Menu+Power and then hold the HOME button to enter back into recovery.
14. Scroll down and press on "Apply any zip from sd"
15. Press on ROM.zip and let it install.
16. Reboot your phone to finish.
-------------------------------------------------------------------------------------------------------------------------------
Partition your SD Card to have EXT3 and Swap
Q. What is partitioning?
A. This breaks up your sd card to 3 file systems. Allowing apps to be stored on your SD Card
Q. What is EXT2/3/4?
A. EXT is a filesystem that is only read by a linux OS such as Android. This allows apps to be stored on the SD Card
Q. What is SWAP?
A. Swap is a space on your SD Card that the phone will use as "fake" internal RAM allowing for a major speed increase
1. Backup all your files!
2. Power off your phone
3. Boot into recovery (Hold HOME while holding the POWER button)
4. Scroll down to Partition SD CARD in the recovery menu and press on it
5. Click on Partition SD
6. In the menu, it will ask for you to input two numbers. Swap, then EXT space.
Enter the following:
- SWAP: 96 MB
- EXT: 512 MB
- FAT32: Rest of SD Card
7. Once done go back to the Partition SDcard menu
8 Click on SD:ext2 to ext3
9. Press HOME to confirm
10. Once done, you need to install your current ROM to enable auto apps2sd and swap
11. Download your currently used rom
- Latest CyanogenMOD - HERE
12. Put the .zip file you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
13. Once done, unplug your phone from your PC
14. Press HOME to disable USB-MS
15. Scroll down to "Flash ZIP from sdcard"
16. Select update-cm-X.X.X-signed.zip and Press HOME to install
17. Press HOME to install
18. Once Done, press on "Reboot System Now"
19. Congrats! You are now done!
-------------------------------------------------------------------------------------------------------------------------------
Installing a Theme
1. Download your favorite theme
- XDA Theme Forum - HERE
NOTE: Make sure you know that the theme is ment for your currently install rom
2. Put the .zip file you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
3. Once done, unplug your phone from your PC
4. Press HOME to disable USB-MS
5. Scroll down to "Flash ZIP from sdcard"
6. Select "themeExampleX.zip" and Press HOME to install
7. Press HOME to install
8. Once Done, press on "Reboot System Now"
9. Enjoy your newly themed ROM
-------------------------------------------------------------------------------------------------------------------------------
Factory Reset Your Phone (Data + Cache WIPE)
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to WIPE and click it
4. Click on "Wipe data/factory reset"
5. Press HOME to continue
6. Reboot your phone once done
-------------------------------------------------------------------------------------------------------------------------------
Full SD Card WIPE (EXT, DATA, Dalvik-Cache)
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to WIPE and click it
4. Click on "Wipe data/factory reset"
5. Press HOME to continue
6. repeat steps 3, 4, and 5 for "WIPE Dalvik-Cache" and "WIPE SD:ext partition"
6. Reboot your phone once done
-------------------------------------------------------------------------------------------------------------------------------
Donate
Hey guys, if you think my Guides have helped you and in general are very helpful, please considering Donating!
Like My Guide(s)? Donate
-------------------------------------------------------------------------------------------------------------------------------

Backup/Restore your phone (Includes EXT Partition)
Backup:
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to "backup/restore" and click it
4. Click on "Nand + ext backup"
5. Press HOME to continue
6. This will take 5-10 min to finish
Restore:
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to "backup/restore" and click it
4. Click on "Nand Restore"
5. Press HOME to continue
6. This will take 5-10 min to finish
-------------------------------------------------------------------------------------------------------------------------------
ADB and FASTBOOT
Q. What is ADB?
A. ADB is a source tool for developers and avid android modders such as yourself to access the commands prompt of your phone through your PC. This allows full access to your phone through your computer which makes moving, installing, removing, and replacing files on your phone MUCH faster
Q. What is fastboot?
A. Similar to ADB, this allows you in flash a while img to any partition in your phone, including recovery, system, and user-data.
To setup ADB and Fastboot, please follow my very detailed guide found HERE
-------------------------------------------------------------------------------------------------------------------------------
Difference between a Boot-Loop, Semi-Brick, and a full Brick
Boot-Loop
Q. What is a Boot-Loop?
A. A boot loop is when your phone is stuck on the "ANDROID" screen when u first boot your phone (after the G1 screen or the My Touch screen). This occurs when something you have flashed went bad or interfeared with something you already had installed.
Solution:
1. Turn off your phone
2. Enter Recovery (Hold HOME while holding the POWEr button)
3. Choose from the following:
- Install a rom you KNOW works. Such as the latest cyanogenROM or the rom you have been preivously using
or
- Make a full wipe of your SD Card an phone and flash your update again
Semi-Brick
Q. What is a Semi-Brick?
A. A Semi-Brick is when your phone wont boot at all. The only thing is, you still have access to the recovery and/or fastboot menu
Solution:
1. Turn off your phone
2. Enter Recovery (Hold HOME while holding the POWEr button)
3. Choose from the following:
- Install a rom you KNOW works. Such as the latest cyanogenROM or the rom you have been preivously using
or
- Make a full wipe of your SD Card an phone and flash your update again
Brick
Q. What is a Brick?
A. A Brick is when your phone wont boot at all. This time, you DO NOT have access to the recovery AND fastboot menu. Basically, your phone is a paper weight.
Solution:
You can try this fix here which requires a Donor G1 to work:
HERE
OR
Try to get a new phone.
-------------------------------------------------------------------------------------------------------------------------------
Donate
Hey guys, if you think my Guides have helped you and in general are very helpful, please considering Donating!
Like My Guide(s)? Donate
-------------------------------------------------------------------------------------------------------------------------------
Additions and Questions
- If you think I should add anything to this guide or have any feedback please post it here!
- You can always PM me with questions or even post them here. I would be very glad to help!
-------------------------------------------------------------------------------------------------------------------------------
Credits
- Cyanogen
- Amon_RA
- XDA Community
- Anyone else who i am forgeting
-------------------------------------------------------------------------------------------------------------------------------

saved for future additions

saved for another future posting that i might need

When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?

rpdiddy11 said:
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
Click to expand...
Click to collapse
......Android opens .apks, you would need androzip to extract a zip file. Linda will only open .apks to install..

Nicely done, as usual.

Would this guide be the same if I was using Super D as the rom?

hiddengopher said:
Would this guide be the same if I was using Super D as the rom?
Click to expand...
Click to collapse
ya u can use any rom that has root enabled.

rpdiddy11 said:
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
Click to expand...
Click to collapse
u need to unzip the file on your computer and only place the .apk files on ur sd card
edit: It doesnt even come in a .zip
Download it here
http://zenthought.org/system/files/asset/2/flashrec-1.1.3-20091107-2.apk
Place on SD and install through linda or any file manager.

Force close
Hey so I did the whole then and it worked mint thank you very much. But one hiccup every time I open something from the original Google install like contacts or market it force closes the app. Any idea on whats going on??

Help please!
why does my G1 get stuck on D" blue android logo? i can't load it. omfg guys please help. I'm in a state of panick here.
I just installed D' latest cm and D' drc83 thingy i just skipped D" upgrade to cupcake part. omg i'm really really panick right now
help please RASAP!

OMG
OMG I"M FINALLY ABLE TO LOAD but why can't i load my 3G settings? D' apn is set by default and all but why can't i use it?
please help me really please

snOwrOse said:
why does my G1 get stuck on D" blue android logo? i can't load it. omfg guys please help. I'm in a state of panick here.
I just installed D' latest cm and D' drc83 thingy i just skipped D" upgrade to cupcake part. omg i'm really really panick right now
help please RASAP!
Click to expand...
Click to collapse
No need to panic. As long as you can access the Blue Android Logo, you are fine.
Please list, step by step, what you did (including ROM Version Numbers).
Also - you might want to try flashing/wiping your phone. That seems to take care of many issues, but I'd still like to see what you did.

elitemonkie said:
Hey so I did the whole then and it worked mint thank you very much. But one hiccup every time I open something from the original Google install like contacts or market it force closes the app. Any idea on whats going on??
Click to expand...
Click to collapse
Best guess would to be to wipe and try again.

a little help!
guys why can't i download apps from market place after following this guide? It keep saying forces close i just can't download any apps at all however i can browse them.
Anywhere to find apk. file apps or any solution please?
Some help here guys!
Thanks! appreciated!

Well I fixed it but I installed Dwangs OS and works mint.

because my Phone had PVT i updated everything... and then i would reboot at the end after installing the ROM and it will not boot... it gets stuck at the T-Mobile G1 Logo... is there anyway to fix this?
Cheers...

ElChibo said:
because my Phone had PVT i updated everything... and then i would reboot at the end after installing the ROM and it will not boot... it gets stuck at the T-Mobile G1 Logo... is there anyway to fix this?
Cheers...
Click to expand...
Click to collapse
Depends, can you get into recovery or bootloader?

JAguirre1231 said:
Depends, can you get into recovery or bootloader?
Click to expand...
Click to collapse
i can get into recovery mode.. i have been trying to reflash.. but no matter what.. i get stuck on The G1 screen...

[FIXED] [Q] help! Trying to upgrade android 2.1 to 2.2 on Optus SGS

Hi all,
I'm a beginner to this stuff, so please bear with me. I've gotten an SGS from Optus here in Australia, with Android 2.1. I want to upgrade to 2.2, so here I am on these forums
I confirmed that there was no 3-button combo mode on this SGS, and have successfully installed the fix as detailed here: http://forum.xda-developers.com/showthread.php?t=785201 (a much more painful process than I thought, having to get a hold of a Windows computer (wasn't comfortable using Windows in a VM to flash my phone, couldn't figure out how to get the 3-button on my SGS with Hiemdall), get the USB drivers from the Android SDK, install Java, stab self with spoon, etc)
Now I've gotten the 3-button combo on the phone, I have read through the FAQ thread (http://forum.xda-developers.com/showthread.php?t=723596) and the thread on the newest ROM(?) Doc BUJP8 (http://forum.xda-developers.com/showthread.php?t=817703).
Bearing in mind that I have never done this before, what the heck do I do next? I tried putting the BUJP8 file (BUJP8_Doc_V9.zip, renamed to update.zip) on the phone storage in a folder titled 'sdcard', rebooted with ADB and got told that the phone couldn't extract the update.zip file. Is that correct? Do I need any other files to update my phone from 2.1 to 2.2?
Edit: The phone tells me "E:Can't open /sdcard/update.zip (No such file or directory) Installation aborted."
I'm rather frustrated and grumpy I know that I'm missing something, so if you can please let me know what to do next, that would be excellent!

From the threads installation instructions. This rom works fine on Optus (I'm using it as well) with Dark Theme.
BTW, don't rename the Doc ROM to update.zip. You need to use the clockwork file as update.zip (see below)
Good luck
Installation Steps (Read this very carefully!)
01. Download the ROM (which you seem to already have downloaded) and put it on your internal sdcard.
02. Download clockworkmod recovery from here: http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-galaxys.zip
You *need* Clockworkmod, this won’t work with stock recovery.
03. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
*SKIP THIS STEP AS YOU'RE COMING FROM AN OFFICIAL OPTUS ROM WITH NO TWEAKS*
04. If you had Voodoo installed prior to installing this ROM (Eclair or Froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
05. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
06. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
07. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
08. Select “choose zip from sdcard” and then select the ROM zip package. Then choose yes.
09. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
11. After the phone boots up, shutdown phone again, and then boot into recovery. The phone will boot DIRECTLY into Clockworkmod. From there, select "advanced ULK features", then "Lagfix options". You can select any of the lagfix schemes (description here). I recommend NO-RFS advanced EXT4 (others are known to have issues and may cause loss of data)
Click to expand...
Click to collapse

Woot! All working now The trick I hadn't worked out from all the instructions was to put the update.zip file in the root of the phone storage as seen by Windows, as it wasn't clear if I should have created a folder called 'sdcard' and putting update.zip there or not.
So once I worked out that putting update.zip in the root of the phone storage was the correct thing to do, I could finally get the recovery mode and have the phone successfully see 'update.zip'!
The phone has booted, and I've shut it down and gone back to clockwork, but there isn't a 'NO-RFS advanced EXT4' option for lagfix - the closest is 'NO-RFS advanced (a=e4)' - is this the EXT4 option, just badly rendered?

daehenoc said:
The phone has booted, and I've shut it down and gone back to clockwork, but there isn't a 'NO-RFS advanced EXT4' option for lagfix - the closest is 'NO-RFS advanced (a=e4)' - is this the EXT4 option, just badly rendered?
Click to expand...
Click to collapse
Good to hear you got it sorted.
And yes. That's the right EXT4 option

try this
http://webtrickz.com/how-to-update-...oid-2-2-froyo-via-kies-anywhere-in-the-world/
I did

[Q] Not booting into CWM?

My captivate won't boot into CWM recovery, even when directed by the Rom Manager app.
Completely stock rom, rooted. I've already flashed the latest version via the app.

Check your internal sd card for an update.zip file. If it's not there, I believe it's in the clockworkmod folder, named 'recovery-update.zip'. Copy and paste it to the root of your sd card and rename it update.zip. You should be good to go.

vunuts said:
Check your internal sd card for an update.zip file. If it's not there, I believe it's in the clockworkmod folder, named 'recovery-update.zip'. Copy and paste it to the root of your sd card and rename it update.zip. You should be good to go.
Click to expand...
Click to collapse
After this I reboot into recovery mode and flash update.zip?

Yes, reboot into recovery. Use the volume rocker to scroll to 're-install packages' and press the power button to select it. It will probably reboot you right back to the same screen again, with the blue and yellow letters, if it does, re-install packages again and that should boot you right into clockwork recovery. All the text in clockwork is green, so you'll know when it's a success.

vunuts said:
Yes, reboot into recovery. Use the volume rocker to scroll to 're-install packages' and press the power button to select it. It will probably reboot you right back to the same screen again, with the blue and yellow letters, if it does, re-install packages again and that should boot you right into clockwork recovery. All the text in clockwork is green, so you'll know when it's a success.
Click to expand...
Click to collapse
OK, I get to that, do a phone reboot, tell it to reboot into CWM and it still reverts back to the samsung recovery screen??

snapplefish said:
OK, I get to that, do a phone reboot, tell it to reboot into CWM and it still reverts back to the samsung recovery screen??
Click to expand...
Click to collapse
So have you seen the actual CWM recovery screen? Black background and green words? If you're still seeing the samsung recovery with the blue and yellow words, re-install packages again.
And double check to make sure that the update.zip is in the root/main part of the internal sd card.

vunuts said:
So have you seen the actual CWM recovery screen? Black background and green words? If you're still seeing the samsung recovery with the blue and yellow words, re-install packages again.
And double check to make sure that the update.zip is in the root/main part of the internal sd card.
Click to expand...
Click to collapse
Yes, I had made sure that the update.zip was in the right place, I did see the black background and green words, and I've flashed the update multiple times (have also tried redownloading, renaming again and reflashing). No dice.

Oh, ok, well that completes the process of booting into CWM. Now what do you need to use CWM for?
If you're flashing ROM's:
find a ROM that you want
download it
place it on your sd card
scroll down and select 'install zip from sd card'
then scroll and select 'choose zip from sd card'
then find the rom and select
then confirm your action by scrolling and selecting the rom again.

vunuts said:
Oh, ok, well that completes the process of booting into CWM. Now what do you need to use CWM for?
If you're flashing ROM's:
find a ROM that you want
download it
place it on your sd card
scroll down and select 'install zip from sd card'
then scroll and select 'choose zip from sd card'
then find the rom and select
then confirm your action by scrolling and selecting the rom again.
Click to expand...
Click to collapse
Well, I would select a rom to flash, but it would reboot into the samsung recovery screen; I can get to CWM by flashing the update again, and then flashing the zip from there, but I assume that's not the correct way to do it?

Yes, actually that is the correct way to do it. Sometimes you have to flash the update twice in order for samsung recovery to take you into CWM.
Just get into CWM and flash from there.

vunuts said:
Yes, actually that is the correct way to do it. Sometimes you have to flash the update twice in order for samsung recovery to take you into CWM.
Just get into CWM and flash from there.
Click to expand...
Click to collapse
Ah, alright, I thought what I had been doing was abnormal. Thanks a ton.

No problem at all. Glad I could help and glad it worked for ya!

Installing CWM on Captivate 2.1-update

Trying to get CWM installed (to eventually get CM7 installed) on my friend's Captivate running stock 2.1-update1 to no avail. We have it rooted, we have ROM manager installed, but no matter what I do when it comes to flashing a recovery, it does not work. When I go to flash the update.zip, it says file is not found because it doesn't seem to be downloading anything at all. Any help?
EDIT: I think I got it, might have just been selecting the wrong option.....

If it doesn't work then try this. This will work. Btw rom manager does not play nice with captivates. I would not suggest it.
Download this: http://www.mediafire.com/?ve234hbg64ctcu0
Then follow these instructions.
step 4: Install clockwork recovery.
1. Go to the download folder and rename clockworkrecovery.zip to update.zip. Mount your phone and drag the update.zip file into the root directory. It is ok to overwrite the update.zip you used before. When it is done copying turn off your phone.
2. Unplug your phone and hold down both volume buttons and the power button until a strange menu with blue items pops up. This is called the recovery menu.
3. Scroll using the volume buttons to the menu item titled "reinstall packages" and press the power button to select. (you may have to do this twice to get it to work)
4. Your phone should restart and you should be at a green menu.

capocaccia said:
If it doesn't work then try this. This will work. Btw rom manager does not play nice with captivates. I would not suggest it.
Download this: http://www.mediafire.com/?ve234hbg64ctcu0
Then follow these instructions.
step 4: Install clockwork recovery.
1. Go to the download folder and rename clockworkrecovery.zip to update.zip. Mount your phone and drag the update.zip file into the root directory. It is ok to overwrite the update.zip you used before. When it is done copying turn off your phone.
2. Unplug your phone and hold down both volume buttons and the power button until a strange menu with blue items pops up. This is called the recovery menu.
3. Scroll using the volume buttons to the menu item titled "reinstall packages" and press the power button to select. (you may have to do this twice to get it to work)
4. Your phone should restart and you should be at a green menu.
Click to expand...
Click to collapse
yeah we got it to work but thank you so very much for your instructions. My friend is basically amazed at the speed and flexibility of CM7 over that Eclair bloated it piece of garbage the stock rom is.

Wow... This Worked in July 2013
I pulled an old Captivate from the drawer that has Android 2.1-update (Eclair) on it and could not for the life of me recall how to get CWM Recovery so I can start installing some later ROMS.
The method you provided worked. Downloaded that file, put it into the phone's internal memory, root directory, changed name to update.zip, got into Samsung recovery, and on the SECOND try it installed CWM recovery.
Thanks.

I have cwm 6.0.3.6 installed. CWM website says 2.0.5.2 (or something close to that) is only available recovery.
How did I end up with 6.0.3.6? And should I flash 2.x.x.x?
Running 10.2 nightly.
Sent from my SGH-I897 using xda app-developers app

nespid said:
I have cwm 6.0.3.6 installed.
Click to expand...
Click to collapse
You don't need to flash anything.

[Q] Bricked Phone? Can't Load Recovery

This is my bro's old phone, and he said it's rooted and it has CWM installed.
1. I wanted to install a new rom so I put the zip file in an SD card.
2. There's a Recovery mode option when you want to restart the phone
3. I wiped the cache and data/partition.
4. I tried searching for the zip file, but I couldn't find it.
5. So I turned off the phone and relocated the zip file to the root of the sd drive.
Now! I'm trying to load into recovery, but I can't.
Is it bricked????
I plugged it on the pc and it made a sound that detected the device.
Btw, I'm a total amateur at programming/rooting, so all the help in the simplest form would be very appreciated.
Please help, the phone is still good and I don't want it to go to waste. I wanna start using it! Any help is appreciated (including reference links to other posts/threads)

to come into recovery mode, pull your battery out and then in again. then hold volume up, home button and power on all together....hold them all 3 till Samsung S logo is gone or till Kernel logo appears, the you can led the power button free but hold the other 2 till you will be in recovery mode again.
In CWM do not search or tick for the update zip. Go over: install zip from internal sd card and then phone should show you the files which are included there. Hopefully device will show you the rom.zip you want to flash there too.
If not, then i recommend to search here in the forum, and take you some to read and inform you about next steps....here are some links for first and further informations:
Firmwares and how to install via Odin:
http://forum.xda-developers.com/showthread.php?t=1102881&highlight=odin
[A.I.O Rescue & Recovery] My Android Collection:
http://forum.xda-developers.com/showthread.php?t=1796807