Database Develop

Programming Help

I have a US Cellular HTC 6900 -- running Incubus26Jc's Super Eclair Lite 2.1 [RLS5] installed on the NAND. I'm having a hard time programming my phone number into it (US Cellular does not have OTA programming so I need to manually program it). I got the APN setup and was able to run the USCC PRL update, but just can't figure out how to program my phone number. Can someone please point me in the right direction?
Reason for edit: Added detail

I believe you need to do that in Windows Mobile first and then install Android.

ThomasHW said:
I believe you need to do that in Windows Mobile first and then install Android.
Click to expand...
Click to collapse
Doh! That's what I was afraid of. What a pain. You'd think there would be some way to manually do it in Android.

how do you do the prl update and what apn info are you using

crackeyes said:
how do you do the prl update and what apn info are you using
Click to expand...
Click to collapse
all that stuff has to be set in WinMo before you flash

ii Candor ii said:
Doh! That's what I was afraid of. What a pain. You'd think there would be some way to manually do it in Android.
Click to expand...
Click to collapse
This should be able to do what you want:
http://forum.xda-developers.com/showpost.php?p=6097236&postcount=30
I've never actually used it to program a number and you'll have to figure out the hex format but it should work. In any case write down any settings you change so you can get things back to where you started.

dzo said:
This should be able to do what you want:
http://forum.xda-developers.com/showpost.php?p=6097236&postcount=30
I've never actually used it to program a number and you'll have to figure out the hex format but it should work. In any case write down any settings you change so you can get things back to where you started.
Click to expand...
Click to collapse
Thanks for this. Although, I ended up flashing back to WinMo, programmed my MDN and MSID and then flashed back to Android again using Incubus26Jc's Super FroYo RLS10 Themed.
Sorry I couldn't test out your app.
Getting it activated tomorrow. Hoping the data will work.

Just as an update -- I got it activated. Everything is working great so far. Voice, 3G data, SMS, camera, Exchange email, etc.
Thanks again.

Factory/Admin Menu access?

I know some have discovered how to access this menu on a WP7 device or two by dialing ##634# on the dialpad. We know this does not work on the HD7.
Has it been discovered for this phone yet? I'm in a bind where Wind Mobile has issues with WP7 devices and MMS messaging and read a few got it working by performing some changes within this menu.

No idea if this helps, but there's an HTC app called Connection Setup. It detects the carrier you're on and applies apn settings. Really not sure, but maybe it applies an apn for mms as well?

profets said:
No idea if this helps, but there's an HTC app called Connection Setup. It detects the carrier you're on and applies apn settings. Really not sure, but maybe it applies an apn for mms as well?
Click to expand...
Click to collapse
Actually that was my last resort and I tried that already. Sure it gave me a list of carriers to choose from but did not help even when selecting "Wind" in the end. I got excited for about 20 seconds.
People with Samsungs were able to resolve their issues by accessing this menu. So I have to rely on either someone getting the codes for the HD7 or if MS releases some kind of fix in their big update next month.

[Q] SMS problem

hi guy's long time lurker first time poster...
i'm having a problem with all sms sending 'failing' when ever i've got packet data turned on. its not something i've ever come across on any of my previous devices... any nudge in the right direction will be very welcomed.
p.s i'm on t-mobile uk if that make any difference.
Thanks in advance
john

check your APN settings and MMS settings.

They are sharing the same apn, but i've been playing with the setting (all know variations) but still every time i use packet data it will always fail to send any sms's.
It's becoming very annoying to have to manually connect every time i want to use some data.

tiboric said:
They are sharing the same apn, but i've been playing with the setting (all know variations) but still every time i use packet data it will always fail to send any sms's.
It's becoming very annoying to have to manually connect every time i want to use some data.
Click to expand...
Click to collapse
Hey!
Just ask from you mobile provider, what must be your APN settings. In 2.3.4 you must ALWAYS put the APN settings manually. If you added them, save and pick it. ALL DONE!
CHEERS!

thanks i'll give it ago, was just using the setting they sent me over the air and already in sim card, will input manually when i get home, and let you know.
Thanks again for the help.
Edit: no this didn't work either, now im really peeved(lol). can't for the life of me think what else it could be. would flashing the wrong modem file cause this? as its all i can think that is left to try....

tiboric said:
thanks i'll give it ago, was just using the setting they sent me over the air and already in sim card, will input manually when i get home, and let you know.
Thanks again for the help.
Edit: no this didn't work either, now im really peeved(lol). can't for the life of me think what else it could be. would flashing the wrong modem file cause this? as its all i can think that is left to try....
Click to expand...
Click to collapse
Hey!
Try to flash stock ROM. We will see what happens then, dose the settings working in 2.2.1. For me was the stock ROM XXKC1. Let it try.
CHEERS!

I flashed 2.3.3 this morning.... will try 2.2.1 tonight, hopefully this will solve it,
Thanks

tiboric said:
I flashed 2.3.3 this morning.... will try 2.2.1 tonight, hopefully this will solve it,
Thanks
Click to expand...
Click to collapse
Hey!
THX man, but you not need to thank always(thx anyway ). If you dont get you problem fixed, you can try others STOCK firmwares. Sometimes it takes a lot of flashing, but it can help sometimes too.
CHEERS!

yeah flashing to 2.2.1 fixed it but i want to use FirstUA-ROM-v1.2 do you think theres a way round it?
p.s i always thank those that try to help me.

Same issue
I have the same problem, bud.
Updated my Ace to Gingerbread and found I couldn't send SMS with Packet Data turned on. Turn it off and SMS sends OK. I'm with Virgin (UK) which I believe is the same network as T-Mobile.
Re-flashed Froyo and all works as it used to. After that, I fired up Kies as I hoped to get an official version that way and sure enough it said there was a firmware update available so I installed that. Turned out to be the official Samsung Gingerbread and yet again i broke SMS when Packet Data was turned on.
I'm back to Froyo once more and have emailed Virgin to ask if they can offer any advice. I notice another report of this issue on another forum where the guy called Virgin and was apparently told the fault seemed to be with VM.
Sorry this doesn't provide an answer but thought it worth corroborating your symptoms.
Cheers!

Use fla.sh rom instead. Its very stable and fast . Multi csc too.
Sent from my GT-S5830 using XDA App

pssyche said:
I have the same problem, bud.
Updated my Ace to Gingerbread and found I couldn't send SMS with Packet Data turned on. Turn it off and SMS sends OK. I'm with Virgin (UK) which I believe is the same network as T-Mobile.
Re-flashed Froyo and all works as it used to. After that, I fired up Kies as I hoped to get an official version that way and sure enough it said there was a firmware update available so I installed that. Turned out to be the official Samsung Gingerbread and yet again i broke SMS when Packet Data was turned on.
I'm back to Froyo once more and have emailed Virgin to ask if they can offer any advice. I notice another report of this issue on another forum where the guy called Virgin and was apparently told the fault seemed to be with VM.
Sorry this doesn't provide an answer but thought it worth corroborating your symptoms.
Cheers!
Click to expand...
Click to collapse
Big thanks for letting me know I'm not the only one with the problem(thought i was loosing my mind,lol)
actually the phone was a virgin locked phone but was unlock to all networks by them for me... maybe something i can look into.
p.s flashing fla.sh didn't fix it either..

I am having this same issue using stock 2.3.3.
I bought my ace factory unlocked using it on orange. Sometimes sms will send, but majority of time it will fail until I disable packet data.
I tend to email or use gtalk/kik for messages but the odd time I want sms this gets annoying.
Oddly I never had this problem on the 2.3.4 I tried from samsfirmware.

Got the same problem. Using 3, and they just gave me a new SIM-card. Gotta finde some clever way of disabling data every time I open Messaging

yeah im looking for a way of re enabling the option in the extended power menu but with out much luck, all the modded ones seem to leave it out.

tiboric said:
yeah im looking for a way of re enabling the option in the extended power menu but with out much luck, all the modded ones seem to leave it out.
Click to expand...
Click to collapse
Found a solution to it!
Although a quite complicated one

The_Hamster said:
Found a solution to it!
Although a quite complicated one
Click to expand...
Click to collapse
Complicated is my middle name, I own a n900, lol.
So how did you get around it?

tiboric said:
Complicated is my middle name, I own a n900, lol.
So how did you get around it?
Click to expand...
Click to collapse
Okay, gonna try to explain it.
1. Go to /system/app and rename Mms.apk to Mms.apk.bak
2. Install the attached Mms.apk (It's from CM6)
3. Download AutomateIt from the Android Market (Just the free one)
4. Open it and add a rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should not be marked.
5. Save it and add a new rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is NOT marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should BE marked. Save this one, and you are done!
This will disable Mobile Data every time you open your Texts, and enable it then you exit your texts. The reason you need the CM6 Messaging-app, is that this tricks doesn't work with the original Samsung-app

The_Hamster said:
Okay, gonna try to explain it.
1. Go to /system/app and rename Mms.apk to Mms.apk.bak
2. Install the attached Mms.apk (It's from CM6)
3. Download AutomateIt from the Android Market (Just the free one)
4. Open it and add a rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should not be marked.
5. Save it and add a new rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is NOT marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should BE marked. Save this one, and you are done!
This will disable Mobile Data every time you open your Texts, and enable it then you exit your texts. The reason you need the CM6 Messaging-app, is that this tricks doesn't work with the original Samsung-app
Click to expand...
Click to collapse
Working perfectly, Thanks a lot.
AutomateIt is a very cool app, there's so much you can do with it.
Thanks again
john

tiboric said:
Working perfectly, Thanks a lot.
AutomateIt is a very cool app, there's so much you can do with it.
Thanks again
john
Click to expand...
Click to collapse
Found a problem though. MMS doesn't seem to work. Downloading the message fails..

[Q] Install carrier exclusive apps

Is there any way to install carrier exclusive apps on non-carrier phones? I'm not talking about OEM exclusive apps, but carrier exclusive ones.
For example I want to install AT&T Locker on my Lumia, but I'm not in the US, let alone on AT&T.
Can this be done?

Yeah, same proxy technique as for OEM apps...

I tried Reker's proxy: 117.135.139.179, and also another one: 103.13.29.118.
I could freely install OEM apps, but not that AT&T Locker one.
What else can I try?

You have to actually create your own proxy rules. It should be pretty obvious what part of the URL specified from your phone is the MO identifier; you just have to change that to another MO. (For example, T-Mobile USA uses "TMO-US" and Rogers Canada uses "ROG-CA"; I think AT&T uses "ATT-US".) Those "public" proxies are only aimed at the OEM apps, since normally the MO apps aren't worth anything to people who don't use that MO.

GoodDayToDie said:
You have to actually create your own proxy rules. It should be pretty obvious what part of the URL specified from your phone is the MO identifier; you just have to change that to another MO. (For example, T-Mobile USA uses "TMO-US" and Rogers Canada uses "ROG-CA"; I think AT&T uses "ATT-US".) Those "public" proxies are only aimed at the OEM apps, since normally the MO apps aren't worth anything to people who don't use that MO.
Click to expand...
Click to collapse
Thanks a lot. After meddling a bit with Fiddler2, I finally managed to install that AT&T Locker app. It fu**ed up anyway, opened fine but crashed at login. Guess it's not my luck.

Gnad said:
Thanks a lot. After meddling a bit with Fiddler2, I finally managed to install that AT&T Locker app. It fu**ed up anyway, opened fine but crashed at login. Guess it's not my luck.
Click to expand...
Click to collapse
Yeah, I can understand that Fiddler isn't the easiest thing to run... Are you using my app to install AT&T Locker or are you using the direct URL? Also after you got it installed, is it requiring an AT&T SIM or something?
Oh, another thought... What device are you using? This app actually has some provxml stuff that gets deployed on Lumia devices.

thals1992 said:
Yeah, I can understand that Fiddler isn't the easiest thing to run... Are you using my app to install AT&T Locker or are you using the direct URL? Also after you got it installed, is it requiring an AT&T SIM or something?
Oh, another thought... What device are you using? This app actually has some provxml stuff that gets deployed on Lumia devices.
Click to expand...
Click to collapse
I have a Lumia (1020). So what I did was using the Auto-responder function to capture the URL then redirect it. I changed product code to a 1020 AT&T (dm=RM-877_nam_att_205), change carrier to AT&T (moId=ATT-US). I accessed it with IE using the direct URL (bookmarked in advance). I think it worked fine, since it did display the install button.
When I opened the app, it displayed a signup/login window. After enter my credentials and hit login, it crashed, and kept crashing when I tried to access back to the app. Had to remove and reinstall. Then I tried to signup for a new account, it still crashed and crashed. From my laptop, I can login fine.
I didn't see anything on the app that said it requires an AT&T sim. But since I'd changed moID to AT&T, it should be tricked into thinking my sim is AT&T isn't it? And I did keep the proxy on all the time. If you can install and run it fine, could you give me some instructions about how you did it? Like what and how parameters should be changed?

I actually have only ran it on my 520, not even on my 928 yet... I just know it needs extra privileges once installed, as it shows up inside the Tier3 list. Check on your phone if its in that list if you can.
Sent from my RM-860 using Tapatalk

thals1992 said:
I actually have only ran it on my 520, not even on my 928 yet... I just know it needs extra privileges once installed, as it shows up inside the Tier3 list. Check on your phone if its in that list if you can.
Sent from my RM-860 using Tapatalk
Click to expand...
Click to collapse
I'm a little confused here. It sure requires an OEM level restricted capability, which is ID_CAP_MEDIALIB_PHOTO_FULL, I think, so we cannot sideload it. But since I'm installing it from the store, it should be okay, isn't it? Like we can use proxy method to install Nokia Camera which obviously has this capability.

Gnad said:
I'm a little confused here. It sure requires an OEM level restricted capability, which is ID_CAP_MEDIALIB_PHOTO_FULL, I think, so we cannot sideload it. But since I'm installing it from the store, it should be okay, isn't it? Like we can use proxy method to install Nokia Camera which obviously has this capability.
Click to expand...
Click to collapse
The app installs from the store, but the provxml that's inside might not be executed. Usually you can launch Tier3 using the dial string to check if it's fully installed. You can find the code in the WP8 Diagnostics thread in my sig.
EDIT: Never mind... I thought this app had one and it doesn't. I'll need to look at the xap to investigate...
Those ATIV S devices are looking to be more and more useful...
Sent from my RM-860 using Tapatalk

How to use Hotspot and USB tethering for FREE (Sprint, possibly more)

Go into airplane mode, then come out, directly after hit whichever one you want to do (wifi hotspot/USB tethering) and it should work without problems. I have tried and used both. If you have an easier way, please share!

Go to An settings and add dun to the end of the pan type. Works everytime. Not just Motorola, works on Note8 and V20

"An settings"? "pan type"?
Are these typos we have to decrypt? I don't have anything like this is my Network Settings.

Quantumstate said:
"An settings"? "pan type"?
Are these typos we have to decrypt? I don't have anything like this is my Network Settings.
Click to expand...
Click to collapse
He's meaning APN settings and APN type "settings>More>cellular networks>access point names"
But this didn't work for me

Comet1966 said:
He's meaning APN settings and APN type
Click to expand...
Click to collapse
No kidding?
I sure hope he's not a coder, an editor, or missile tech.
Salesman, or driving a mop would be good fits.

Quantumstate said:
No kidding?
I sure hope he's not a coder, an editor, or missile tech.
Click to expand...
Click to collapse
Lol if he's typing on this phone I can understand it, I mistype a lot on this one. But I do look back and fix them. You should try the APN settings and see if they work for you. I still gotta stick with the airplane mode method.

You do realize Sprint includes hotspot in the unlimited plan, right?

donjuro said:
You do realize Sprint includes hotspot in the unlimited plan, right?
Click to expand...
Click to collapse
No they don't. Maybe in one of them, but not mine.

If you go to sprint.com you'll see on the front page they include 10 GB of hotspot data. After those 10 gigs I believe it's throttled. I've had this for as long as I can remember.

donjuro said:
If you go to sprint.com you'll see on the front page they include 10 GB of hotspot data. After those 10 gigs I believe it's throttled. I've had this for as long as I can remember.
Click to expand...
Click to collapse
That's not the plan we have. We've had our plan since 2007. Everything family plan I believe

I did mean apn lol. I also used 253gb of data last month.

WARNING about switching to a plan with free 10GB/mounth Mobile Hot Spot: Despite confirming with the Sprint phone jockey that Google Voice carrier integration would still work when I switched from my Everything to a Freedom Unlimited plan; it ended up breaking the integration and "cancelling" my Google Voice account. It took me about five days talking to Google and Sprint; and only after going back to the Everything plan, I was able to get GV working again.
Sent from my iPad using Tapatalk

can someone update this post with the info of Android 8 ROM? does the procedure in OP work on Android 8?
if not what other way are there?

doctorman said:
can someone update this post with the info of Android 8 ROM? does the procedure in OP work on Android 8?
if not what other way are there?
Click to expand...
Click to collapse
Id be interested in knowing as well.

dohcdragon said:
Id be interested in knowing as well.
Click to expand...
Click to collapse
It works just tried it

doctorman said:
can someone update this post with the info of Android 8 ROM? does the procedure in OP work on Android 8?
if not what other way are there?
Click to expand...
Click to collapse
Yup it works just fine.

The apn is grey out. How to change it?

ericliujian said:
The apn is grey out. How to change it?
Click to expand...
Click to collapse
Add a new apn and use the same info from the greyed out apn.
Sent from my Moto Z (2) using XDA-Developers Legacy app

I just acquired a stock Sprint Z2 Force on Oreo 8.0 and the usual Airplane / Quick Hotspot tap fix isn't working like it did on the E5 Plus and Z3 Play, both of which were also running Oreo - the hotspot never activates on the Z2. APN's are all greyed out and locked and there's no way to add another one as of now. I need Hotspot in emergencies only, but I do need it for those occasional situations. Any other workarounds? Thanks!
Update - APN's can be added (not edited or removed) when the phone first reboots, but adding the dun command to the default "internet x.ispsn" APN - under a new APN with all other settings duplicated (as was suggested) - doesn't enable the hotspot as of now.

TVCCS said:
I just acquired a stock Sprint Z2 Force on Oreo 8.0 and the usual Airplane / Quick Hotspot tap fix isn't working like it did on the E5 Plus and Z3 Play, both of which were also running Oreo - the hotspot never activates on the Z2. APN's are all greyed out and locked and there's no way to add another one as of now. I need Hotspot in emergencies only, but I do need it for those occasional situations. Any other workarounds? Thanks!
Update - APN's can be added (not edited or removed) when the phone first reboots, but adding the dun command to the default "internet x.ispsn" APN - under a new APN with all other settings duplicated (as was suggested) - doesn't enable the hotspot as of now.
Click to expand...
Click to collapse
I was able to edit mine using an sq3lite editor from the PlayStore.
https://play.google.com/store/apps/details?id=com.dundastech.sqlitemasterlight
Add dun to the end of the internet apn, then change the dun apn to x.ispsn
It's under the app phone and messaging storage/databases/telephony.db/carriers
Just search for your operator by numeric. Sprint is 310120