Related
Okay so there seems to be a good amount of people here with Sprint and Verizon as their carrier, but there is not that much support for MetroPCS, which is a growing CDMA provider. I thought this would be a good place to gather information as far as what can work with the network concerning the HTC Vogue, MetroPCS, and Android.
So far this is what I have:
Data is for sure working on Donut AOSP, but I did have some issues when trying to connect with facebook and google sync, but I was successfully able to access the internet. I will come back to this build later but am currently downloading this in the themed version and I will report back on how it goes.
Using this Hero build I can once again get data, text, and calls, but I cannot get any data apps to work, therefore rendering GPS useless, which I currently can't even check to see if it works.
So the only thing that seems to work with Android with MetroPcs is Data (browser only), Text, and Calls. Not bad if that is all you need but in this case I prefer WM. But I will continue to fiddle with it. Hopefully some more builds will be pushed out that will hopefully resolve this. And using the SD card method is the only method in which I have successfully gotten data to work. Data is a no-go for me with the NAND flashing.
To set up your data the easiest way is as follows:
-Activate voice dialer
-Say "Open APN"
-hit okay okay to open the APN
-Click on your current APN to edit the settings or activate the menu and create a new one
-Enter in these settings
Proxy: wap.metropcs.net
Port: 3128
Username: your [email protected]
Password: metropcs
The other settings dont really matter. I always just left them how they were.
Credit for the initial data settings goes to L0GiC4L 3ViL.
juicy.cook said:
Okay so there seems to be a good amount of people here with Sprint and Verizon as their carrier, but there is not that much support for MetroPCS, which is a growing CDMA provider. I thought this would be a good place to gather information as far as what can work with the network concerning the HTC Vogue, MetroPCS, and Android.
So far this is what I have:
Data is for sure working on Donut AOSP, but I did have some issues when trying to connect with facebook and google sync, but I was successfully able to access the internet. I will come back to this build later but am currently downloading this in the themed version and I will report back on how it goes.
Click to expand...
Click to collapse
Are you booting through the SD card or NAND? Are you able to use GPS?
whitey10tc said:
Are you booting through the SD card or NAND? Are you able to use GPS?
Click to expand...
Click to collapse
I was using SD. And I didn't try out GPS yet. I tried NAND and I could never successfully get data working.
Yes I have that same problem with cricket setting! If I come up with a solution I will post it.
juicy.cook said:
I was using SD. And I didn't try out GPS yet. I tried NAND and I could never successfully get data working.
Click to expand...
Click to collapse
this is a stab in the dark, but did you delete your blank files off your SD card? I had trouble once, and by deleting the rootfstonand and systemfstonand files, etc and rebooting my data started working. Just something to try
berardi said:
this is a stab in the dark, but did you delete your blank files off your SD card? I had trouble once, and by deleting the rootfstonand and systemfstonand files, etc and rebooting my data started working. Just something to try
Click to expand...
Click to collapse
No I never did try it. I will have to look into it though. Was everything that required data working (maps, apps, and weather?) or just the browser?
NAND method works on Android using MetroPCS APN. I have one running, but only WAP, marketplace doesn't work, youtube doesn't work, googlemaps doesn't work, etc etc.
I believe the reason for these not working is they have their own way of communicating with network, so they don't use the APN settings, maybe this is wrong and they (google) should fix it (their libraries) to use APN information?
I heard from a reliable source that there will be a Kyocera phone running android before the end of 2010 on the Metropcs network. I googled around and I found this ://phandroid.com/2009/10/08/kyocera-android-phone-coming-2010/
FYI I work for metro...
vlizad said:
I heard from a reliable source that there will be a Kyocera phone running android before the end of 2010 on the Metropcs network. I googled around and I found this ://phandroid.com/2009/10/08/kyocera-android-phone-coming-2010/
FYI I work for metro...
Click to expand...
Click to collapse
If you work for Metro, can you find out how to get the google apps to work? I can browse the web, but that is about it. I am not certain if these apps are trying to go in through a restricted port, but if you could find that out I am certain that a lot of people would be more than grateful.
Did anyone get any of the apps to work via Metropcs? I have data working, but would love to sync to google for contacts, calender etc...
Thanks.
geekvideo.org said:
Did anyone get any of the apps to work via Metropcs? I have data working, but would love to sync to google for contacts, calender etc...
Thanks.
Click to expand...
Click to collapse
Nothing yet and patiently awaiting for a solution on this. I am pretty sure that it has to do with the APN info, but... I am not completely sure.
gas there been any advancement in this?
Has anyone got market to work yet at least
Jio110890 said:
gas there been any advancement in this?
Has anyone got market to work yet at least
Click to expand...
Click to collapse
No market and no gapps as of yet. It could be Metro itself blocking the ports...
hi, I am also considering MetroPCS with my out of contract XV6900.
Did you have to unlock the phone first and if so how did you do it?
I already installed polymod 2.1 gamma and I can't find an unlock option in the menus... thanks!
wujuyamakin said:
hi, I am also considering MetroPCS with my out of contract XV6900.
Did you have to unlock the phone first and if so how did you do it?
I already installed polymod 2.1 gamma and I can't find an unlock option in the menus... thanks!
Click to expand...
Click to collapse
I don't believe that there is any way to unlock the phone via Android. It has to be done from WM. Check out my signature on how to do this.
*bump*
so no data for anyone on metropcs using xdandroid yet?
wolfpack612 said:
*bump*
so no data for anyone on metropcs using xdandroid yet?
Click to expand...
Click to collapse
This project isn't really part of the xdandroid development afaik...
No new developments on this?
Its been a while since you all were talking about this. If you are still looking for help let me know as I have it all working on my hero.
djowen6565 said:
Its been a while since you all were talking about this. If you are still looking for help let me know as I have it all working on my hero.
Click to expand...
Click to collapse
yea id like to kno
hi guy's long time lurker first time poster...
i'm having a problem with all sms sending 'failing' when ever i've got packet data turned on. its not something i've ever come across on any of my previous devices... any nudge in the right direction will be very welcomed.
p.s i'm on t-mobile uk if that make any difference.
Thanks in advance
john
check your APN settings and MMS settings.
They are sharing the same apn, but i've been playing with the setting (all know variations) but still every time i use packet data it will always fail to send any sms's.
It's becoming very annoying to have to manually connect every time i want to use some data.
tiboric said:
They are sharing the same apn, but i've been playing with the setting (all know variations) but still every time i use packet data it will always fail to send any sms's.
It's becoming very annoying to have to manually connect every time i want to use some data.
Click to expand...
Click to collapse
Hey!
Just ask from you mobile provider, what must be your APN settings. In 2.3.4 you must ALWAYS put the APN settings manually. If you added them, save and pick it. ALL DONE!
CHEERS!
thanks i'll give it ago, was just using the setting they sent me over the air and already in sim card, will input manually when i get home, and let you know.
Thanks again for the help.
Edit: no this didn't work either, now im really peeved(lol). can't for the life of me think what else it could be. would flashing the wrong modem file cause this? as its all i can think that is left to try....
tiboric said:
thanks i'll give it ago, was just using the setting they sent me over the air and already in sim card, will input manually when i get home, and let you know.
Thanks again for the help.
Edit: no this didn't work either, now im really peeved(lol). can't for the life of me think what else it could be. would flashing the wrong modem file cause this? as its all i can think that is left to try....
Click to expand...
Click to collapse
Hey!
Try to flash stock ROM. We will see what happens then, dose the settings working in 2.2.1. For me was the stock ROM XXKC1. Let it try.
CHEERS!
I flashed 2.3.3 this morning.... will try 2.2.1 tonight, hopefully this will solve it,
Thanks
tiboric said:
I flashed 2.3.3 this morning.... will try 2.2.1 tonight, hopefully this will solve it,
Thanks
Click to expand...
Click to collapse
Hey!
THX man, but you not need to thank always(thx anyway ). If you dont get you problem fixed, you can try others STOCK firmwares. Sometimes it takes a lot of flashing, but it can help sometimes too.
CHEERS!
yeah flashing to 2.2.1 fixed it but i want to use FirstUA-ROM-v1.2 do you think theres a way round it?
p.s i always thank those that try to help me.
Same issue
I have the same problem, bud.
Updated my Ace to Gingerbread and found I couldn't send SMS with Packet Data turned on. Turn it off and SMS sends OK. I'm with Virgin (UK) which I believe is the same network as T-Mobile.
Re-flashed Froyo and all works as it used to. After that, I fired up Kies as I hoped to get an official version that way and sure enough it said there was a firmware update available so I installed that. Turned out to be the official Samsung Gingerbread and yet again i broke SMS when Packet Data was turned on.
I'm back to Froyo once more and have emailed Virgin to ask if they can offer any advice. I notice another report of this issue on another forum where the guy called Virgin and was apparently told the fault seemed to be with VM.
Sorry this doesn't provide an answer but thought it worth corroborating your symptoms.
Cheers!
Use fla.sh rom instead. Its very stable and fast . Multi csc too.
Sent from my GT-S5830 using XDA App
pssyche said:
I have the same problem, bud.
Updated my Ace to Gingerbread and found I couldn't send SMS with Packet Data turned on. Turn it off and SMS sends OK. I'm with Virgin (UK) which I believe is the same network as T-Mobile.
Re-flashed Froyo and all works as it used to. After that, I fired up Kies as I hoped to get an official version that way and sure enough it said there was a firmware update available so I installed that. Turned out to be the official Samsung Gingerbread and yet again i broke SMS when Packet Data was turned on.
I'm back to Froyo once more and have emailed Virgin to ask if they can offer any advice. I notice another report of this issue on another forum where the guy called Virgin and was apparently told the fault seemed to be with VM.
Sorry this doesn't provide an answer but thought it worth corroborating your symptoms.
Cheers!
Click to expand...
Click to collapse
Big thanks for letting me know I'm not the only one with the problem(thought i was loosing my mind,lol)
actually the phone was a virgin locked phone but was unlock to all networks by them for me... maybe something i can look into.
p.s flashing fla.sh didn't fix it either..
I am having this same issue using stock 2.3.3.
I bought my ace factory unlocked using it on orange. Sometimes sms will send, but majority of time it will fail until I disable packet data.
I tend to email or use gtalk/kik for messages but the odd time I want sms this gets annoying.
Oddly I never had this problem on the 2.3.4 I tried from samsfirmware.
Got the same problem. Using 3, and they just gave me a new SIM-card. Gotta finde some clever way of disabling data every time I open Messaging
yeah im looking for a way of re enabling the option in the extended power menu but with out much luck, all the modded ones seem to leave it out.
tiboric said:
yeah im looking for a way of re enabling the option in the extended power menu but with out much luck, all the modded ones seem to leave it out.
Click to expand...
Click to collapse
Found a solution to it!
Although a quite complicated one
The_Hamster said:
Found a solution to it!
Although a quite complicated one
Click to expand...
Click to collapse
Complicated is my middle name, I own a n900, lol.
So how did you get around it?
tiboric said:
Complicated is my middle name, I own a n900, lol.
So how did you get around it?
Click to expand...
Click to collapse
Okay, gonna try to explain it.
1. Go to /system/app and rename Mms.apk to Mms.apk.bak
2. Install the attached Mms.apk (It's from CM6)
3. Download AutomateIt from the Android Market (Just the free one)
4. Open it and add a rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should not be marked.
5. Save it and add a new rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is NOT marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should BE marked. Save this one, and you are done!
This will disable Mobile Data every time you open your Texts, and enable it then you exit your texts. The reason you need the CM6 Messaging-app, is that this tricks doesn't work with the original Samsung-app
The_Hamster said:
Okay, gonna try to explain it.
1. Go to /system/app and rename Mms.apk to Mms.apk.bak
2. Install the attached Mms.apk (It's from CM6)
3. Download AutomateIt from the Android Market (Just the free one)
4. Open it and add a rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should not be marked.
5. Save it and add a new rule. Trigger should be "Application Status Trigger" and the app is Messaging. Make sure "Application Adtivated" is NOT marked. And the action should be "Set Mobile Data" and "Mobile Data Enabled" should BE marked. Save this one, and you are done!
This will disable Mobile Data every time you open your Texts, and enable it then you exit your texts. The reason you need the CM6 Messaging-app, is that this tricks doesn't work with the original Samsung-app
Click to expand...
Click to collapse
Working perfectly, Thanks a lot.
AutomateIt is a very cool app, there's so much you can do with it.
Thanks again
john
tiboric said:
Working perfectly, Thanks a lot.
AutomateIt is a very cool app, there's so much you can do with it.
Thanks again
john
Click to expand...
Click to collapse
Found a problem though. MMS doesn't seem to work. Downloading the message fails..
Thanks:
Scary Alien for helping with some of my brainstorms
CPCookieMan for pointing me in the right direction with my initial thoughts for this project
MongooseHelix for the idea of the script vs a flashable zip
This is a very simple script that utilizes the radiooptions command to disable the radio but still allow use of WiFi without having to use airplane mode. Great for people who just upgraded and want to use their older device for an mp3 player with WiFi access. I wanted to make it to be run in init.d on startup but haven't successfully got it working that way yet so for now it can be run with script manager. This script can be run as follows:
1. Download the script and place it somewhere on your SD Card. (Maybe make a folder named Scripts to keep things organized)
2. Download Script Manager from the market.
3. Open Script Manager and navigate to where you saved the script then select the script.
4. Check the options for run as root and if you always use wifi only because you don't have service on your device check off Run at boot as well.
5. When prompted by superuser allow superuser permissions.
I have tested this script on my Incredible and my Eris as well and should be universal to run on any android device.
Download Here
If you are using this on an inactive device and don't want the activation screen coming up after reboot and new ROM flash follow these simple steps.
*NOTE: you need to be using a ROM that has EPST.apk in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
cvbcbcmv said:
cool! Will this work on any rom? I guess it should. This is just what I've been looking for. I'm getting a second dinc to test roms, this won't be on a line so this will be perfect. I haven't flashed scripts before (however it sounds easy enough) is it easy to disable it?
Click to expand...
Click to collapse
Yes. It will work on any rooted device and any ROM. Just run through Script Manager and if you want to disable it change the settings within Script Manager to disable run on boot then reboot. It's that easy.
cvbcbcmv said:
hey, will this work on a nexus one? I'm getting one for rom testing instead of a second incredible, so, same deal. I would think this would work, but will it?
Click to expand...
Click to collapse
Yes.. It should work on any rooted device running any ROM. If you want to double check to be certain you can check inside the ROM for /system/bin/radiooptions, then you will know for certain it should work. The script uses that to shut down the radio.
Cool, almost makes me wish I would have kept my Eris.
tether?
So can this allow us to tether the wi-fi only phone to our new network phone? the idea being to use the non-network phone to stream pandora, use google maps, etc?
jumperalex said:
So can this allow us to tether the wi-fi only phone to our new network phone? the idea being to use the non-network phone to stream pandora, use google maps, etc?
Click to expand...
Click to collapse
Yes. That can be done or connected to a WiFi ap. Whatever you would like to do with it.
Sent from my ADR6300
Quick question, I have an old incredible with a cracked screen I wanted to turn into an MP3 player like youre suggesting here. How exactly do I download from the market on a deactivated phone? Can't get past setup without the phone being activated.
Carnage9270 said:
Quick question, I have an old incredible with a cracked screen I wanted to turn into an MP3 player like youre suggesting here. How exactly do I download from the market on a deactivated phone? Can't get past setup without the phone being activated.
Click to expand...
Click to collapse
There is a way to get past that using ##778. I don't remember without going through it exactly what in all to do but i have a link at home
On ny comp and I can add the details when i get home.
Sent from my ADR6300
CondemnedSoul said:
There is a way to get past that using ##778. I don't remember without going through it exactly what in all to do but i have a link at home
On ny comp and I can add the details when i get home.
Sent from my ADR6300
Click to expand...
Click to collapse
Actually got through it by pressing activate and cancelling several times. It finally just bypassed it. Thanks for the script, working perfectly.
Carnage9270 said:
Actually got through it by pressing activate and cancelling several times. It finally just bypassed it. Thanks for the script, working perfectly.
Click to expand...
Click to collapse
Doing that will work but next reboot you'll probably get the activation screen again. If not you'll get it again after another ROM flash but it will come back at some point. I think I noticed on my Eris it was after a reboot. This procedure below got rid of it permanently.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Then you shouldn't be prompted to activate again even after a new ROM is flashed
Just to be sure, is this reversible? Say if I needed to reactivate the the phone?
slow88lx said:
Just to be sure, is this reversible? Say if I needed to reactivate the the phone?
Click to expand...
Click to collapse
Absolutely. Simply open script manager and disable run on boot. You can then remove the script from your SD card.
Sent from my ADR6300
CondemnedSoul said:
Absolutely. Simply open script manager and disable run on boot. You can then remove the script from your SD card.
Sent from my ADR6300
Click to expand...
Click to collapse
Would they have to undo your other step from here? http://forum.xda-developers.com/showpost.php?p=16714569&postcount=12
Just asking before someone else does.
jermaine151 said:
Would they have to undo your other step from here? http://forum.xda-developers.com/showpost.php?p=16714569&postcount=12
Just asking before someone else does.
Click to expand...
Click to collapse
Good point . No they won't. Dial *228 option 1. It will ask for the phone number you want to activate and that stuff will be done ota. That's how I activated my Eris with a different number as well. I would suggest making sure to do that from a stock or stock based ROM as well.
Sent from my ADR6300
Hi!
Just a question? It isn't easir just use airplane mode + wifi on? on my CM7 nightly i can do it and runs fine. CM7 also remebers the last radio mode after hot reboot.
Sorry for my english. I'm not native
lordc said:
Hi!
Just a question? It isn't easir just use airplane mode + wifi on? on my CM7 nightly i can do it and runs fine. CM7 also remebers the last radio mode after hot reboot.
Sorry for my english. I'm not native
Click to expand...
Click to collapse
That is also an option to this script. Not everyone likes the airplane mode method for one reason or another though so this is an alternative for those people.
You're English isnt bad. I've seen natives with much worse and wouldn't have known you weren't
Sent from my ADR6300
I have the HTC Evo View 4G that I did this too, but for some reason when I ran the script I got the signal bar with an x through it saying "looking for service". Isn't it when it looks for service it's draining the battery more? Isn't there anyway to completly remove the signal bars?
Also, I'm trying to remove the activation upon startup, but the View doesn't have a phone to it. is there any other way to disable the activation throuhg the registry or something?
hasseye said:
I have the HTC Evo View 4G that I did this too, but for some reason when I ran the script I got the signal bar with an x through it saying "looking for service". Isn't it when it looks for service it's draining the battery more? Isn't there anyway to completly remove the signal bars?
Also, I'm trying to remove the activation upon startup, but the View doesn't have a phone to it. is there any other way to disable the activation throuhg the registry or something?
Click to expand...
Click to collapse
i think your right when you also go to battery it say cell standby is using alot of power mine was aroun23%
4218kris said:
i think your right when you also go to battery it say cell standby is using alot of power mine was aroun23%
Click to expand...
Click to collapse
It shouldn't be searching for service with the script running. Do you have the radiooptions command in system/bin? Apparently there are some roms around that do not.
Sent from my ADR6300
I'm confused....I have a non activated incredible that I use at work connected to wifi every day and i've never done anything special to it besides rooting and different roms...am i missing something here?
Go into airplane mode, then come out, directly after hit whichever one you want to do (wifi hotspot/USB tethering) and it should work without problems. I have tried and used both. If you have an easier way, please share!
Go to An settings and add dun to the end of the pan type. Works everytime. Not just Motorola, works on Note8 and V20
"An settings"? "pan type"?
Are these typos we have to decrypt? I don't have anything like this is my Network Settings.
Quantumstate said:
"An settings"? "pan type"?
Are these typos we have to decrypt? I don't have anything like this is my Network Settings.
Click to expand...
Click to collapse
He's meaning APN settings and APN type "settings>More>cellular networks>access point names"
But this didn't work for me
Comet1966 said:
He's meaning APN settings and APN type
Click to expand...
Click to collapse
No kidding?
I sure hope he's not a coder, an editor, or missile tech.
Salesman, or driving a mop would be good fits.
Quantumstate said:
No kidding?
I sure hope he's not a coder, an editor, or missile tech.
Click to expand...
Click to collapse
Lol if he's typing on this phone I can understand it, I mistype a lot on this one. But I do look back and fix them. You should try the APN settings and see if they work for you. I still gotta stick with the airplane mode method.
You do realize Sprint includes hotspot in the unlimited plan, right?
donjuro said:
You do realize Sprint includes hotspot in the unlimited plan, right?
Click to expand...
Click to collapse
No they don't. Maybe in one of them, but not mine.
If you go to sprint.com you'll see on the front page they include 10 GB of hotspot data. After those 10 gigs I believe it's throttled. I've had this for as long as I can remember.
donjuro said:
If you go to sprint.com you'll see on the front page they include 10 GB of hotspot data. After those 10 gigs I believe it's throttled. I've had this for as long as I can remember.
Click to expand...
Click to collapse
That's not the plan we have. We've had our plan since 2007. Everything family plan I believe
I did mean apn lol. I also used 253gb of data last month.
WARNING about switching to a plan with free 10GB/mounth Mobile Hot Spot: Despite confirming with the Sprint phone jockey that Google Voice carrier integration would still work when I switched from my Everything to a Freedom Unlimited plan; it ended up breaking the integration and "cancelling" my Google Voice account. It took me about five days talking to Google and Sprint; and only after going back to the Everything plan, I was able to get GV working again.
Sent from my iPad using Tapatalk
can someone update this post with the info of Android 8 ROM? does the procedure in OP work on Android 8?
if not what other way are there?
doctorman said:
can someone update this post with the info of Android 8 ROM? does the procedure in OP work on Android 8?
if not what other way are there?
Click to expand...
Click to collapse
Id be interested in knowing as well.
dohcdragon said:
Id be interested in knowing as well.
Click to expand...
Click to collapse
It works just tried it
doctorman said:
can someone update this post with the info of Android 8 ROM? does the procedure in OP work on Android 8?
if not what other way are there?
Click to expand...
Click to collapse
Yup it works just fine.
The apn is grey out. How to change it?
ericliujian said:
The apn is grey out. How to change it?
Click to expand...
Click to collapse
Add a new apn and use the same info from the greyed out apn.
Sent from my Moto Z (2) using XDA-Developers Legacy app
I just acquired a stock Sprint Z2 Force on Oreo 8.0 and the usual Airplane / Quick Hotspot tap fix isn't working like it did on the E5 Plus and Z3 Play, both of which were also running Oreo - the hotspot never activates on the Z2. APN's are all greyed out and locked and there's no way to add another one as of now. I need Hotspot in emergencies only, but I do need it for those occasional situations. Any other workarounds? Thanks!
Update - APN's can be added (not edited or removed) when the phone first reboots, but adding the dun command to the default "internet x.ispsn" APN - under a new APN with all other settings duplicated (as was suggested) - doesn't enable the hotspot as of now.
TVCCS said:
I just acquired a stock Sprint Z2 Force on Oreo 8.0 and the usual Airplane / Quick Hotspot tap fix isn't working like it did on the E5 Plus and Z3 Play, both of which were also running Oreo - the hotspot never activates on the Z2. APN's are all greyed out and locked and there's no way to add another one as of now. I need Hotspot in emergencies only, but I do need it for those occasional situations. Any other workarounds? Thanks!
Update - APN's can be added (not edited or removed) when the phone first reboots, but adding the dun command to the default "internet x.ispsn" APN - under a new APN with all other settings duplicated (as was suggested) - doesn't enable the hotspot as of now.
Click to expand...
Click to collapse
I was able to edit mine using an sq3lite editor from the PlayStore.
https://play.google.com/store/apps/details?id=com.dundastech.sqlitemasterlight
Add dun to the end of the internet apn, then change the dun apn to x.ispsn
It's under the app phone and messaging storage/databases/telephony.db/carriers
Just search for your operator by numeric. Sprint is 310120
So lovin the phone so far. I purchased the unlocked version directly from samsung. Activated on sprint no problem however being unlocked I dont have any of their bloat ware on my phone kinda nice. However I also do not have their visual voicemail app. I found a copy .apk from this thread
https://forum.xda-developers.com/galaxy-s4-sprint/themes-apps/modded-sprint-visual-voicemail-apk-t2994978
Loaded it however it does not seem to work app starts up but does not show the existing voicemail in the voicemail box. states activation message could not be sent check connection. I contacted sprint they were of no help and claim they do not even have visual voice mail. Any way was hoping somebody here far smarter than myself figured out how to get this to work. Its not the end of the world but would be nice to have the visual voicemail back.
Lee
leedawg said:
So lovin the phone so far. I purchased the unlocked version directly from samsung. Activated on sprint no problem however being unlocked I dont have any of their bloat ware on my phone kinda nice. However I also do not have their visual voicemail app. I found a copy .apk from this thread
https://forum.xda-developers.com/ga...s/modded-sprint-visual-voicemail-apk-t2994978
Loaded it however it does not seem to work app starts up but does not show the existing voicemail in the voicemail box. states activation message could not be sent check connection. I contacted sprint they were of no help and claim they do not even have visual voice mail. Any way was hoping somebody here far smarter than myself figured out how to get this to work. Its not the end of the world but would be nice to have the visual voicemail back.
Lee
Click to expand...
Click to collapse
In order to get the Sprint VVM working on unlocked you need to edit t he build prop and flash required files like done on earlier Samsung devices...the problem is root....which is on its way....until then install Google voice...get a separate Google voice number...dial in phone app *73yourgooglevoicenumber...to put it back to Sprint dial *730 alone
BlueFox721 said:
In order to get the Sprint VVM working on unlocked you need to edit t he build prop and flash required files like done on earlier Samsung devices...the problem is root....which is on its way....until then install Google voice...get a separate Google voice number...dial in phone app *73yourgooglevoicenumber...to put it back to Sprint dial *730 alone
Click to expand...
Click to collapse
ah yeah I was afraid of that figured stock OS might not have to do all that stuff. Thanks so much for the response ill probably do what you suggested with google voice.
sorry about necro
BlueFox721 said:
In order to get the Sprint VVM working on unlocked you need to edit t he build prop and flash required files like done on earlier Samsung devices...the problem is root....which is on its way....until then install Google voice...get a separate Google voice number...dial in phone app *73yourgooglevoicenumber...to put it back to Sprint dial *730 alone
Click to expand...
Click to collapse
I've tried using search, and cant seem to find my answer... My carrier is sprint, note 8 snapdragon rooted rev1 bootloader. I am not getting a single voicemail notification, nor is there any vvm app. I really only need the notifications. After being on the phone with sprint for a long time, their solution was to use google voicemail. Now that root is achieved how can I install and use sprint VVM? Do you have a copy of the apk you can share?
purchasedPhone said:
I've tried using search, and cant seem to find my answer... My carrier is sprint, note 8 snapdragon rooted rev1 bootloader. I am not getting a single voicemail notification, nor is there any vvm app. I really only need the notifications. After being on the phone with sprint for a long time, their solution was to use google voicemail. Now that root is achieved how can I install and use sprint VVM? Do you have a copy of the apk you can share?
Click to expand...
Click to collapse
I don't but you can get the voicemail to work...but if you root! Both the rooted system and the Sprint ROM have working VVM...
BlueFox721 said:
I don't but you can get the voicemail to work...but if you root! Both the rooted system and the Sprint ROM have working VVM...
Click to expand...
Click to collapse
I used the files from samfail to root, I didnt get any voicemail apps at all
What device model is it? Does it have the U (unlocked) or P (Sprint) at the end?
I use Instavoice app.
purchasedPhone said:
I used the files from samfail to root, I didnt get any voicemail apps at all
Click to expand...
Click to collapse
Flash DevDigitel's Sprint ROM
BlueFox721 said:
Flash DevDigitel's Sprint ROM
Click to expand...
Click to collapse
I appreciate the response, but I'm looking for an app solution. I really don't want to flash something and wipe again. It was months before I rooted because I couldn't find the time to re-set up the phone. Is it possible to just install the apk and edit build.prop like you suggested in your earlier post?
purchasedPhone said:
I appreciate the response, but I'm looking for an app solution. I really don't want to flash something and wipe again. It was months before I rooted because I couldn't find the time to re-set up the phone. Is it possible to just install the apk and edit build.prop like you suggested in your earlier post?
Click to expand...
Click to collapse
Yes...you can...just Google Sprint VVM for rooted ROMs and extract the app from your Sprint folder in csc directory or from DevDigitel's ROM...you can edit the build prop to designate greatltespr or something like that...you will see what others have done for ROMs before...I am going to try this with my ROM in the coming week...if you need, give DevDigitel a pm as he did this for his ROM....sorry I don't have the specifics at the moment...It has been a while since I had to do it and it was a Note3....if I get done with my ROM and come up with a clear method I'll let you know how I did it...but it may be a week or so...
I actually flashed your unbranded a long time ago, and I lost voicemail notifications then, so I can wait another week. Thanks for your help