Hi
I ve just bought a second HTC rhodium, my first Rhodium was broken
It's a used one in SPA Lang.
I decided to isntalla the Official FRA ROM, but i had that errror [294] : INVALID VENDER ID
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility
I tried also the European version of the official rom, the same problem.
I tried to install the ROM also using a memory card but i had this error: not allow
I Tried to install the HARD SPL also,but it tells me that I have already HarSPL on device before !! (Commercial error).
Please Help
Thanks
You can't install updates not made for your particular device, even if they're official, unless you have HardSPL. Explain how you had to get your device replaced (in this thread) and you should hopefully get another HardSPL license from cmonex and olipro.
Related
Hello everybody, my name is sebastien and i come from belgium.
I have a problem with my mteor mobile phone. I was one version 1.32 and i tried like everybody to upgrade it on 1.34. Now the phone doesnt work anymore (freezing on the startup screen).
The bootloader is working (power + cam button), but i have different versions of rom upgrade utility on my computer. Only one version works (v3.12.3.0, properties of ROMUpgradeUt.exe). This version of upgrade rom utility came with the 1.34 rom.
The others one give me an 260 Error : Update Error. (crash on "verifying information on your smartphone, please wait").
So i tried the working Upgraderom Utility with all the roms i have (1.13, 1.32 and 1.34) and i have always the same error after 1% updating : 294 invalid vender ID.
I tried to put the firmware on the root of my microSD card (rename BREEIMG.nbh). The bootlaoader checks the firmware ("checking") and then it says "00028002" "Not allow" and then it goes back to the bootloader. I tried this method with the three firmware i've got.
Could you help me please !! Thank you very very much. Sebastien.
Hi
I have a same problem
Hi lacenko!
just put your mteor in bootloader mode
connecto to pc (disable activesync usb connection)
and start the mtty (usb console program) -> infos about in wiki!!
now just use the info command and look what cid you have!!!
after you know that search/ask provider for an update !!!
only this can help!!
after you have the original shipped rom, please upload it to rapidshare and we can link it...
when you have flashed you can reflash with a other newer better rom!!
but theres no way now until you become a rom that matches your cid to flash the phone to working state!
Hi guys,
I tried to upgrade my trinity and it stopped at 80% with error about connection problem. I've entered bootloader manually (I get:
"TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000")
I then run the updater again, and it fails at %1 every time with "error 270"
How can I restore my device ?
Which updater are you using?
Try a ROM that matched your CID (official HTC Rom if you have a non-branded device).
Good luck.
The crash happened when I tried to update to mUn wm6 rom
Now I've got the same issue (error 270) with all the roms (even the one matching my CID)
The problem is that it says that my device sould be synchronized with activesync but I cannot connect to activesync as it only start in bootloader.
tonio94 said:
The crash happened when I tried to update to mUn wm6 rom
Now I've got the same issue (error 270) with all the roms (even the one matching my CID)
The problem is that it says that my device sould be synchronized with activesync but I cannot connect to activesync as it only start in bootloader.
Click to expand...
Click to collapse
You definitely should've followed other forum member's suggestion to flash HSPL before trying mUn's WM6 ROM... I might be able to help you, though, contact me in private if you want.
I hope your trin will get alive again!!!
Please post any news after pms...
Good luck bro
Unbricked thanks to stepw. You're a genious stepw thank you so much
OK, can you please write here the procedure that helped you?
So if anyone else will have same problem, it will see the solution...
Thanks!
same Problem here with Herald....How can i flash from Bootloader if i don´t have the original HTC Rom file, that fits my CID ?
Thanks !
stepw sent me a tool he made to flash HSPL from the PC. As he is still working on it, he asked me not to distribute it but I think you can ask him with a private message
A little correction - HSPL was NOT flashed to tonio94's device, unless he flashed it manually.
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
PCServe said:
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
Click to expand...
Click to collapse
not many details, but let's see
you successfully flashed h-spl (from olinex thread)? and when trying to flash custom rom you get the error 260? that right?
ensure to use customruu for flashing and not the ruu (hardspl.exe) from h-spl thread
if you use sd for storage of rom image, why not flash using sd-method in the first place?
a newer german rom is here
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...