Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
PCServe said:
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
Click to expand...
Click to collapse
not many details, but let's see
you successfully flashed h-spl (from olinex thread)? and when trying to flash custom rom you get the error 260? that right?
ensure to use customruu for flashing and not the ruu (hardspl.exe) from h-spl thread
if you use sd for storage of rom image, why not flash using sd-method in the first place?
a newer german rom is here
Related
Hey Chaps,
Just thought earlier today i'd have a go at upgrading my phone with the new HTC firmware for my Vodafone Kaiser. First i tried it on it's own only to find the 'vendor' had blocked the upgrade, then i ran the HARDSPL software, when it rebooted my phone to the tri-colour screen i stopped pressing enter on the batch file and ran the HTC upgrade again! ... success - sort of; the upgrade got to 15% and stopped with a connection error (my usb's dodgy i think), then when the phone rebooted to the tri-colour boot loader it'd a) no longer accept the HTC Rom (vendor thing again) and b) become irritatingly broken.
Is it possible to flash an older vodafone rom to the device? if so, where can i find such a beast. Or does anyone know of any devilish ways to put the new rom on using the bog standard bootloader?
Thanks in advance big time to any clever phone experts who can de-brick my... er... brick
Dan.
your supposed to install hardspl before upgrading it if you try it on its own it will brick it at least thats what i heard from the stickies
azazelx, he has hardSPL installed, anyway.
@JimmyJangle: flash via microSD card. [url="http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash" URL]Read here.[/url]
You need winrar to extract file nbh from the shipped ROM.exe.
Hmm, i don't think i do have HardSPL actually installed,
When i saw the tricolour screen come up with different version information I stopped that batch file that was installing HARDSPL (impatiently) and started the HTC one (which failed at 15%). So now i (think) i have a phone with no firmware and the bootloader says:
KAIS130
SPL-1.56.0000
CPLD=8
I reckon if i can find a vodafone made rom the bootloader'll let me install it.
Any idea where i could find one?
What is ur orginal shipped ROM?
Your solution now is flash back the orginal ROM by using microSD card method I mentioned above, install HardSPL succesfully, then flash whatever ROM you prefer.
Hey Nghiem,
Thanks for the help, that link doesn't go anywhere though.
Also, wouldn't i need the original rom from somewhere in order to do that?
Thanks,
Dan
where did you buy the phone e.g vodafone, orange, etc...so I can tell you the original ROM? Because you phone CID is not unlock, hence you must flash the back the shippied one.
Get the WM 6.1 Vodaphone official here http://forum.xda-developers.com/showthread.php?t=365058
Hi,
I got the phone from Vodafone in the UK.
It had WM5 on it... erm, that's it.
I've just beem trying to load original voda roms back on to it but it's not happy - i don't know if they really are the originals though, one says 'reconstructed'.
Dan
Actually, that was the rom i tried and it came up with the Vendor ID error.
Dan.
Link on post #6 is the official not reconstructed. How about download directly from Vodafone website? It's strange when you have carrier ID block even with its ROM. Also, try reconstructed ROM listed here http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
Search for mtty, see if it can help you out.
MTTY saved the day!
Only 3 hours of my life lost!
Thanks,
Dan
Cheers. Don't forget to flash HardSPL and read the wiki before doing anything.
I am trying to upgrade ROMS. I have the Ollipro boot loader - ALL OK, the Radio ROM I want, ALL OK. When I try to flash a ROM ([P3600i] Karmba_a v10.1 - Diamond [fixed].rar) or (cmE_0.9_beta.rar) or (n0610e_beta_m2d.7z) I get the above error. I am flashing by SD as I do not use Windoze on my PC. Radio's flash this way fine. Would this be the problem?
tchoklat
3600i
tchoklat said:
I am trying to upgrade ROMS. I have the Ollipro boot loader - ALL OK, the Radio ROM I want, ALL OK. When I try to flash a ROM ([P3600i] Karmba_a v10.1 - Diamond [fixed].rar) or (cmE_0.9_beta.rar) or (n0610e_beta_m2d.7z) I get the above error. I am flashing by SD as I do not use Windoze on my PC. Radio's flash this way fine. Would this be the problem?
tchoklat
3600i
Click to expand...
Click to collapse
Hey, i think you have bricked your trin. Read my post also! there is a solution for your problem by making gold card. Haven't luck yet, but i still tried to get my trin working again.
thekidz.rocks said:
Hey, i think you have bricked your trin. Read my post also! there is a solution for your problem by making gold card. Haven't luck yet, but i still tried to get my trin working again.
Click to expand...
Click to collapse
Not sure if my 3600i is bricked as I have the Olipro 3.6 Hard SPL and I can SD-flash any Radio ROM. It is just the ROM it self that fails with the error as mentioned in the topic. Any guidance appreciated!
tchoklat
Hi all,
Most definitely it is not bricked. Been there with my tinity.
On my pda only the WM5 could be installed without the error code (i only could install it from SD, because i have vista on my computer, and even with trying to follow others advice i didn't managed to flash from my computer)
and after something like 6 hours of hard searches and many tries here is my solution:
1.installed Olios's hardspl_120 (tried both 130 and DES):
first i booted om WM5, copied SSPL-TRIN.exe and the hard-spl nbh that i've renamed it to trinimg.nbh, and run SSPL-TRIN.exe, that will get you in the famous tricoloured screen (i don't know why it only installed the hard spl this way, if i try to manually enter the boot with power+camera+the stylus inserted in the reset it didn't installed and i end up with "Upgrade fail" after 1-2% or i got i restart during the flash upgrade).
2. installed the last radio Trinity_Radio-1.50.08.11
the same way like the hard-spl from SD card.
3. installed WM6 ROM
I've taken a WM6 rom (the first that i tried was Mary v3.7) and installed from SD card.
That was it.... success.
After i've managed to put a wm6 rom i've tried wm6.5 rom and worked and a couple of firmwares.
Hope this post will help in need trinity owners, because i was last night very desperate.....and i didn't found any answers, just tried and tried and...... and hope this solution will work for you too.
good luck!
Hi, guys.
I became recently an owner of AT&T Tilt. I got it with KaiserTouch (two months old release) and I wanted to flash the newest version. But there is the problem.
I downloaded the newest release, connected the phone with my computer, started the KaiserCustomRUU.exe and when the installation is about to begin, it just hangs on 0%?! And the computer shows the error 262, or something like that.
I tried ALOT of times and it's always the same.
Tried flashing from an SD card, but it just shows "Loading..." and hangs there until I take the battery out.
Then I succeded flashing the official ROM with KaiserCustomRUU and now I'm stuck on 6.1 AT&T ROM. Won't flash ANY of the cooked ROMs. :/
Tried to flash HardSPL with both methods and the things are the same (hangs at 0%, hangs at "Loading...")...
So, PLEASE help me!
Edit: My SPL says: SPL-3.56.0000
Edit 2: Made it! HardSPL wasn't installed. So I installed HardSPL 3.56 and it worked! Installed the cooked rom without problem from SD card!
lol How bizzare. I asked the question and I answered it in the same post. Sorry for this.
Hello,
I have bought the VPA Compact from a friend in Germany, but I would like to use some italian ROMs, because on the device there was a bepi German ROM with WM5.
So I decided to change ROM; I found the HardSPL, but I didn't care about the fact that the Olipro HardSPL was not installed yet.
Then I putted on the device two italian ROMs, and all seemed ok, because I have installed Claros 3.51 ROM and another one with WM6.1, with also a new RADIO 1.46.11 (or 1.46.10).
Three days ago I saw on Internet about the possibility to put into my device a WM 6.1 Elegance ROM by eLIas, so, ignoring that I need to have Olipro HardSPL, I started to put the WM 6.1 Elegance, but the flashing has not finished well.
In that time, I didn't lost my courage, and I started to use MTTY and I found that there were some blocks corrupted.
Then I tried to flash ROM by miniSD card: neither in this way I reached the goal to put a working ROM on my device; because I tried to put old WM5 italian, Claros 3.51 ROM, some HardSPL (1.04 and 1.1).
So, I ask you if there's some possibility to recover the device and put some ROM, or I need to throw it into the basket?
Hope that someone will answer me.
I wanna say two more things:
everytime I try to flash by WinXP, there is an error (260) from the application utility.
When I try to put a new ROM, the device is turning off after only 1% of progress, and when I try to put an HardSPL, the progress reach 100% and the device is turning off, but I don't see any new change...
Thanks in advance for reading and replying
Hi there, I have a problem with my HTC Kaiser
I've managed to unlock it and flash any rom and radio i wanted, everything worked perfectly, I've had HardSPL 3.34 if i remember correctly
Them, i tried running android, flashed, started booting and... din’t boot. It starts booting but it stops with the following message: [4.2.08726] fake_vsync_int
No problem, i will just reflash back to WM6.1 and get going, BUT... i could not reflash anymore
I noticed that my SPL version has changed, it now shows: KAIS120 - SPL-3.34.0000 - CPLD-8 - USB
I could not flash any roms I've had, searching around i tried many solutions even trying flashing using the MicroSD card without luck
The errors: Either stays at 0% and... ERROR [262] : UPDATE ERROR
or
Gets to 1% and... ERROR [294] : INVALID VENDER ID (When flashing from USB)
Or remains stuck at “loading...” (When trying flashing from MicroSD)
Looking around i found that what i need was to flash the stock rom that came with my Kaiser, my kaiser was WM 6 Portuguese Brazilian, so i got the rom: RUU_Kaiser_HTC_WWE_PTBR_1.88.514.1_PTB_Shipped
Din’t worked
So i tried every rom found here: http://www.shipped-roms.com/index.php?category=windows mobile&model=Kaiser
Din’t worked either
So i tried every other rom i could find, from Chinese roms in support.htc.com to roms found online on file sharing sites, none of them worked
This is a similar problem encountered by Warbyte here, and -Rif- Here, -Rif- managed to find the correct rom, apparently Warbyte din’t have as much luck, to quote him: “Apparently the only solution is to find the matching original ROM which puzzles me as there apparently exists none”
Without other ideas i decided to come here and ask for advice, since i don’t know what else i could try
Any ideas? Thanks for your time.