Hi, guys.
I became recently an owner of AT&T Tilt. I got it with KaiserTouch (two months old release) and I wanted to flash the newest version. But there is the problem.
I downloaded the newest release, connected the phone with my computer, started the KaiserCustomRUU.exe and when the installation is about to begin, it just hangs on 0%?! And the computer shows the error 262, or something like that.
I tried ALOT of times and it's always the same.
Tried flashing from an SD card, but it just shows "Loading..." and hangs there until I take the battery out.
Then I succeded flashing the official ROM with KaiserCustomRUU and now I'm stuck on 6.1 AT&T ROM. Won't flash ANY of the cooked ROMs. :/
Tried to flash HardSPL with both methods and the things are the same (hangs at 0%, hangs at "Loading...")...
So, PLEASE help me!
Edit: My SPL says: SPL-3.56.0000
Edit 2: Made it! HardSPL wasn't installed. So I installed HardSPL 3.56 and it worked! Installed the cooked rom without problem from SD card!
lol How bizzare. I asked the question and I answered it in the same post. Sorry for this.
Related
I am trying to upgrade ROMS. I have the Ollipro boot loader - ALL OK, the Radio ROM I want, ALL OK. When I try to flash a ROM ([P3600i] Karmba_a v10.1 - Diamond [fixed].rar) or (cmE_0.9_beta.rar) or (n0610e_beta_m2d.7z) I get the above error. I am flashing by SD as I do not use Windoze on my PC. Radio's flash this way fine. Would this be the problem?
tchoklat
3600i
tchoklat said:
I am trying to upgrade ROMS. I have the Ollipro boot loader - ALL OK, the Radio ROM I want, ALL OK. When I try to flash a ROM ([P3600i] Karmba_a v10.1 - Diamond [fixed].rar) or (cmE_0.9_beta.rar) or (n0610e_beta_m2d.7z) I get the above error. I am flashing by SD as I do not use Windoze on my PC. Radio's flash this way fine. Would this be the problem?
tchoklat
3600i
Click to expand...
Click to collapse
Hey, i think you have bricked your trin. Read my post also! there is a solution for your problem by making gold card. Haven't luck yet, but i still tried to get my trin working again.
thekidz.rocks said:
Hey, i think you have bricked your trin. Read my post also! there is a solution for your problem by making gold card. Haven't luck yet, but i still tried to get my trin working again.
Click to expand...
Click to collapse
Not sure if my 3600i is bricked as I have the Olipro 3.6 Hard SPL and I can SD-flash any Radio ROM. It is just the ROM it self that fails with the error as mentioned in the topic. Any guidance appreciated!
tchoklat
Hi all,
Most definitely it is not bricked. Been there with my tinity.
On my pda only the WM5 could be installed without the error code (i only could install it from SD, because i have vista on my computer, and even with trying to follow others advice i didn't managed to flash from my computer)
and after something like 6 hours of hard searches and many tries here is my solution:
1.installed Olios's hardspl_120 (tried both 130 and DES):
first i booted om WM5, copied SSPL-TRIN.exe and the hard-spl nbh that i've renamed it to trinimg.nbh, and run SSPL-TRIN.exe, that will get you in the famous tricoloured screen (i don't know why it only installed the hard spl this way, if i try to manually enter the boot with power+camera+the stylus inserted in the reset it didn't installed and i end up with "Upgrade fail" after 1-2% or i got i restart during the flash upgrade).
2. installed the last radio Trinity_Radio-1.50.08.11
the same way like the hard-spl from SD card.
3. installed WM6 ROM
I've taken a WM6 rom (the first that i tried was Mary v3.7) and installed from SD card.
That was it.... success.
After i've managed to put a wm6 rom i've tried wm6.5 rom and worked and a couple of firmwares.
Hope this post will help in need trinity owners, because i was last night very desperate.....and i didn't found any answers, just tried and tried and...... and hope this solution will work for you too.
good luck!
Hi,
I've just upgraded to a new Dutch rom, but since then I only have trouble.
I get different colours (like drivers are not loaded), it keeps getting stuck or resets itself, and nothing helps.
I've tried to put on a different rom, with succes, but I still have the same problems.
On startup, however, I see the right colours.
I also put back the latest original ROM, but no luck...
Can anybody help me?
guessing you have hspl 1.14 installed
Yeah, I reinstalled that, as one of the latest things I did.
The problem you describe happens when you flash a 1.56 based rom with 1.14 HSPL. First flash a stock 1.56 ROM (a new SPL is then flashed as well) or use the new HSPL. Then you should be fine. So no, it's nor corrupt!
For more info, read crackwhore's guide (sticky)
Well, I'm trying to do so now, but it keeps getting stuck at 0%...
Does it matter I have an NLD-version, and not a WWE?
Update: I cannot get a proper connection via activesync, and through the bootloader it stays at 0%, and after a while the update utility says no.
Update 2: ah, thanks to troubleshooting, it looks fine!
THANKS!
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
PCServe said:
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
Click to expand...
Click to collapse
not many details, but let's see
you successfully flashed h-spl (from olinex thread)? and when trying to flash custom rom you get the error 260? that right?
ensure to use customruu for flashing and not the ruu (hardspl.exe) from h-spl thread
if you use sd for storage of rom image, why not flash using sd-method in the first place?
a newer german rom is here
I've done many flashes before. Maybe 1 too many (if possible???). I just flashed it and it seems to be stuck at the "update in progress..." screen, but it's at 99 -100% and it hasn't moved. I reflashed it 3 times and it's still stuck at this stage. I already HardSPLed it and i'm using energy rom. Do you guys have any idea what could be wrong? could it be because i flashed my phone too many times? i think i flashed it a total of 25+ times because after a certain point the phone starts to glitch up so i need a new flash... and i also like to keep updated..
please help! thank you in advance!
btw, I'm flashing via sdcard
Try RUU
Dear friend,
I had the same situation with my old Tytn II.
This is my recommendation:
If you have already done the HARD Spl,which is great,now do the following:
Go to the OFFICIAL HTC site and grab the latest stock 2.07 ROM.
Download it and you will get the RUU with it. RUU ( Rom Update Utility). Updating with RUU usually solves many problems when phones stuck at boot or whatever.
Follow the instructions in RUU and flash stock ROM.
But BEFORE you do anything,REMOVE that SD card with Energy ROM on it.
Please let me know if I was helpful.
Good luck,
Alexander.
Hi there
I just bought a new Topaz. I have HardSPL and then tried to apply a new ROM. Now it keeps on rebooting - it only gets to the screen where it says TOUCH DIAMOND 2 - and the the red numbers appear in the lower right corner - and then it reboots..
Is it bricked or is there anything I can do??
I tried to hard reset - but it still keeps rebooting
No not bricked.
Must be an incompatible ROM or you didn't HSPL to 2.51.
Just find another ROM, Stock or otherwise (since you are HSPL'd, but check your version first), go into Bootloader Mode and flash with RUU.exe.
Thank you Bruce!!
I'm still having problems though. I have tried to install a few different stock ROM - both 6.1 and 6.5. Everytime the same issue - I get stuck on loading the new ROM and it keeps rebooting.
I have tried to upgrade spl to 2.51 but still the same issue
What else can I do??
What does your SPL show in bootloader mode?
Make sure it has Olinex as a suffix.
Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?
niknik76 said:
Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?
Click to expand...
Click to collapse
Is it 1.83.Olinex or 2.51.Olinex?
Flashing a ROM w/o HSPL will most certainly mess up your device but it should be recoverable if you can find your stock ROM for your carrier and region.
You symptoms sound as if you are on 1.83 trying to flash 2.51 SPL ROMS.
Hi, im having the same issue as OP, i tried to flash the latest Energy rom (sept 8) onto my td2 and the bootscreen is showing 1.83.Olinex. What do i do to fix this?
You must have HSPL 2.51 for this ROM and for all newest roms.