I've done many flashes before. Maybe 1 too many (if possible???). I just flashed it and it seems to be stuck at the "update in progress..." screen, but it's at 99 -100% and it hasn't moved. I reflashed it 3 times and it's still stuck at this stage. I already HardSPLed it and i'm using energy rom. Do you guys have any idea what could be wrong? could it be because i flashed my phone too many times? i think i flashed it a total of 25+ times because after a certain point the phone starts to glitch up so i need a new flash... and i also like to keep updated..
please help! thank you in advance!
btw, I'm flashing via sdcard
Try RUU
Dear friend,
I had the same situation with my old Tytn II.
This is my recommendation:
If you have already done the HARD Spl,which is great,now do the following:
Go to the OFFICIAL HTC site and grab the latest stock 2.07 ROM.
Download it and you will get the RUU with it. RUU ( Rom Update Utility). Updating with RUU usually solves many problems when phones stuck at boot or whatever.
Follow the instructions in RUU and flash stock ROM.
But BEFORE you do anything,REMOVE that SD card with Energy ROM on it.
Please let me know if I was helpful.
Good luck,
Alexander.
Related
Hi,
I've just upgraded to a new Dutch rom, but since then I only have trouble.
I get different colours (like drivers are not loaded), it keeps getting stuck or resets itself, and nothing helps.
I've tried to put on a different rom, with succes, but I still have the same problems.
On startup, however, I see the right colours.
I also put back the latest original ROM, but no luck...
Can anybody help me?
guessing you have hspl 1.14 installed
Yeah, I reinstalled that, as one of the latest things I did.
The problem you describe happens when you flash a 1.56 based rom with 1.14 HSPL. First flash a stock 1.56 ROM (a new SPL is then flashed as well) or use the new HSPL. Then you should be fine. So no, it's nor corrupt!
For more info, read crackwhore's guide (sticky)
Well, I'm trying to do so now, but it keeps getting stuck at 0%...
Does it matter I have an NLD-version, and not a WWE?
Update: I cannot get a proper connection via activesync, and through the bootloader it stays at 0%, and after a while the update utility says no.
Update 2: ah, thanks to troubleshooting, it looks fine!
THANKS!
I know that I'm not supposed to start a new thread but I've been told that I can find help here, and could not find anyone with this issue. Apologies to the mods in advance.
Ok, my problem, is that I've flashed lot of ROMs for Blackstone, but lately I can't hold on any ROM longer than a day. After dozens of flashing, for example "XannyTech's" ROM, my phone freezes at the "smart mobility" screen. I've tried re-flashing other "XannyTech's" ROM (i like them the most), and it works for a day or two, but after one of the soft - resets, it gets stuck on this screen again. I've tried soft reset, hard reset, everything, but after awhile - same problem.
What could be the problem!?
I have no idea. But I'm guessing you'll soon be advised to bump down your SPL to the original one and then flash one of the original stock ROMs. And then go back to flashing w/e rom you want. That tends to be the steps/solution to unknown/unresolved issues. Hope you get it sorted out.
Did you try flashing back to the Stock ROM atleast once ?
As per above post, flash back to stock rom and then try flashing cooked rom again.
Also, this should have been posted in Dummies guide thread as it is a 'flashing' issue....but apology accepted
Rick
Hi, guys.
I became recently an owner of AT&T Tilt. I got it with KaiserTouch (two months old release) and I wanted to flash the newest version. But there is the problem.
I downloaded the newest release, connected the phone with my computer, started the KaiserCustomRUU.exe and when the installation is about to begin, it just hangs on 0%?! And the computer shows the error 262, or something like that.
I tried ALOT of times and it's always the same.
Tried flashing from an SD card, but it just shows "Loading..." and hangs there until I take the battery out.
Then I succeded flashing the official ROM with KaiserCustomRUU and now I'm stuck on 6.1 AT&T ROM. Won't flash ANY of the cooked ROMs. :/
Tried to flash HardSPL with both methods and the things are the same (hangs at 0%, hangs at "Loading...")...
So, PLEASE help me!
Edit: My SPL says: SPL-3.56.0000
Edit 2: Made it! HardSPL wasn't installed. So I installed HardSPL 3.56 and it worked! Installed the cooked rom without problem from SD card!
lol How bizzare. I asked the question and I answered it in the same post. Sorry for this.
Hi there
I just bought a new Topaz. I have HardSPL and then tried to apply a new ROM. Now it keeps on rebooting - it only gets to the screen where it says TOUCH DIAMOND 2 - and the the red numbers appear in the lower right corner - and then it reboots..
Is it bricked or is there anything I can do??
I tried to hard reset - but it still keeps rebooting
No not bricked.
Must be an incompatible ROM or you didn't HSPL to 2.51.
Just find another ROM, Stock or otherwise (since you are HSPL'd, but check your version first), go into Bootloader Mode and flash with RUU.exe.
Thank you Bruce!!
I'm still having problems though. I have tried to install a few different stock ROM - both 6.1 and 6.5. Everytime the same issue - I get stuck on loading the new ROM and it keeps rebooting.
I have tried to upgrade spl to 2.51 but still the same issue
What else can I do??
What does your SPL show in bootloader mode?
Make sure it has Olinex as a suffix.
Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?
niknik76 said:
Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?
Click to expand...
Click to collapse
Is it 1.83.Olinex or 2.51.Olinex?
Flashing a ROM w/o HSPL will most certainly mess up your device but it should be recoverable if you can find your stock ROM for your carrier and region.
You symptoms sound as if you are on 1.83 trying to flash 2.51 SPL ROMS.
Hi, im having the same issue as OP, i tried to flash the latest Energy rom (sept 8) onto my td2 and the bootscreen is showing 1.83.Olinex. What do i do to fix this?
You must have HSPL 2.51 for this ROM and for all newest roms.
Hello, so as I stated in the title, I want to flash a custom rom to my X1, I have already installed HardSPL, .72 version, and tried to flash an Energy rom.
The SDCard method won't work, I get the "Image file not found" with my card, and the same error but with some red letters appearing on top of the screen with the other 2 cards i tried. I tried to use KovskyAdvancedRUU to task28 (flash the phone regularly) and as soon as it gets to 1% I get the "Invalid Model ID" error.
Any ideas? Seriously, I don't know if this has been answered before but I have been searching for days and found nothing.
I will be really grateful if someone can provide help, and really sorry if there's already an answer on this.
My already installed rom is WM6.1, stock, Greek.
use hardSPL .78 try again.be sure u did steps in right order
Thanks for the reply! Please check the thread again later, I'll post the result!
dont forget use task 29 before flashing and hard reset after flashing for good perform for your rom...