Hello gays!
I hav a problem with my Mda.
In my mda was windows 05 and i want to upgrade to 06
And im download rom from thiece site:
http://forum.xda-developers.com/showthread.php?t=305125
And i Upgrade rom thiece method :
ANOTHER FLASH METHOD :
If you have the chinese WM6 rom, downgrade to some WM5 with official RUU, then:
download this:
http://rapidshare.com/files/29098553...fixed.zip.html
Once you unpack it, please put the nk.nbf (charmer wm6) into the Shelltool folder. Open shelltool.exe. Click Get Rom info, then click Extract OS. Wait until its finished and you'll receive a file called 8004000-OS.nb (save it for later).
Download the xbeta Chinese WM6 rom : http://rapidshare.com/files/27671349...eta.exe. html
Extract it and put that 8004000.OS you saved before in the XBETA directory. In the itsutils folder of xbeta rom you will find enablerapi.cab and cert_spcs.cab. Copy them to your device, install them on Device Memory, then soft reset.
run xbeta.cmd and choose the 8004000OS.nb file to flash (you should be connected with AS and have your radio module turned off).
When the screen goes green and the flashing is finished make a HARD RESET!. Press Camera and Voice Dail buttons (hold them). Put and hold the stylus in reset button for 2 seconds. Release it. Wait until you see some white fonts on black screen. Then release those 2 buttons. Push the green dial button.
I choose thiece method becouse the first method in the rom subject doesnt work.
But after im instal new rom i have Era rom and when im complete upgrading to wm6 the phone is restart and im see era splash screen and its strange for me :/
So the problem is it is in startup screen showin Era splash screen and he STOP! i tried to hard reset but it gives fat partition error.
Please HElp me!
sounds like your device is CID locked at the time you flash it.. which gives you the same splash screen. However, the fat partition error (I presume it said format fail), is a big problem that AFAIK, it has no solution.
What you can do (at least) now is to put your phone in to bootloader mode and flash it (check the wiki, I think there is a section on this).
I turn on boot loader and i upgrade to another rom Era name and still thiece same Can you give me link with rom ?? to my phone ? Yes i dont unlock the cid
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
Now i download my Net is so slowly :d when im download and upgrade i write and good luck to me ;]
Rom t mobile Doesnt work. Other minds?? But the splash screen is T mobile ;]
ipl 2. 06
spl 2.06. 0000
gsm 02.19.21
os 2.6.2.27
meybe Rescue Rom like i wizard ?? do you now where i can find it??
the splash screen indicated that it has already flashed, but, as I've mentioned above, the partition failure are more complicated than that and may not be fixable yourself. I can't help anymore now, you can try to find some other solution. Good luck.
How to unlock cid ?? can you tell me what i hawe g 3 or g 4
at the top section of this screen, there is this "XDA-Wiki", go in to the 'Wizard' section. G3 G4 CID unlock info is there.
Raptorgda said:
I turn on boot loader and i upgrade to another rom Era name and still thiece same Can you give me link with rom ?? to my phone ? Yes i dont unlock the cid
Click to expand...
Click to collapse
""Splash screen freezing -> SOLUTION !!! DIY
--------------------------------------------------------------------------------
Damn... I walked around and around and solution was all near me and able to do it myself...
Ok here´s how I done it.
First, I must explain what was the problem.
After update the firmware (not actually upgrade, I had the phone full of trash, so I decided to reflash same firmware v2.18 PTG), the Qtek 9100 / HTC Wizard freezed at 2nd splash screen (the one that shows OS versions IPL version, ect). Tried many different versions, upgraded to 2.24, 2.25, downgraded even to 1.6.7.3, but always same problem, freezed on second splash screen. I read many topics on xda-dev, and seen some people with same problem. Apparently there was 2 solutions. 1- send phone back to warranty. 2- write backup ROM from SD in bootloader.
Passed more then 15 hours asking for this SD backup everywhere, and COULDN´T find any help. Apparently no one had this "SD dump ROM Backup".
So here´s how I solved my problem
1- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem""
In Wizard forum
Oszi link doesnt work Do you have other??
Doesnt work sesion like that :
r2sd all
Get_BitData
***** user area size = 0x7A80000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512 And stop hiere
You have Wizard but i have mda 2 compact do you now?? ;]
But i have a idea can you give me backup files?? on cd card ?? i will put it on my sd card
Raptorgda said:
Doesnt work sesion like that :
r2sd all
Get_BitData
***** user area size = 0x7A80000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512 And stop hiere
You have Wizard but i have mda 2 compact do you now?? ;]
But i have a idea can you give me backup files?? on cd card ?? i will put it on my sd card
Click to expand...
Click to collapse
Yes I know!I have MDA cII to and not wizard!
You must other MDA cII !your pda is dead you must other mda cII and save the rom the new mda cII.
He say maybe work other Pda (mda c,mda cII,prophet and more)
(sorry my bad english)
I will put Sd card with backup from my own wizard meybe it is will be work if not i take backup from my firend (he have mda 2 c ) Sory for my bad english!
I will put Sd card with backup from my own wizard meybe it is will be work if not i take backup from my firend (he have mda 2 c ) Sory for my bad english!
Format Is Failed (!?)
Hi. I know that the focus is now on the new ROM, but I am having a problem with my MDA Compact II after following the alternative flashing method. Original details:
IPL 1.12, SPL 1.12.0000, GSM 01.11.20, OS 1.12.2.23
All seemed to go ok, following step by step as per http://forum.xda-developers.com/attachment.php?attachmentid=39129&d=1179243687 and I got to the end step with ‘Congratulations’. I had no error messages. However upon hard reset I got the message: FORMAT FAT PARTITION, FORMAT IS FAILED (oops!)
The screen then showed the same details as before, but with OS now 10.2.0.8.
I’ve done some searching on the Forums & tried restoring the phone via bootloader using both “MDAc2_ROM_Johnnnnnnnnnny_v1.0” (stalls at 99%) and “RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship” (this completes 100% & reverts the OS to 1.12.2.23, but I get the same FORMAT IS FAILED message).
Any further suggestions how I can revert to the original state, or update to WM6?
(My wife has an MDA II as well – I’ve checked my battery in her phone & it is fully charged).
PS Ignore the details at the bottom - I also have an MDA COMPACT (I)
Chameleon846: if you read carefully, you would know that you need at least bootloader in ver. 2.x to flash WM6. And seeing you have 1.x, no wonder it didnt flash poperly. GO find an official HTC Prophet rom and flash it with RUU. It will help.
no problem with this, this happen time after time on every ppc, it's random flashing error.
http://forum.xda-developers.com/showthread.php?t=307332
please, read forums before asking, this was mentioned many times...
vlodeck, thanks. A little knowledge... I stupidly missed the 2.x bit...
I've tried the RUU method with an official ROM. It completes all 100%, but will not go any further. I've seen bits about a restore from an SD card, but can't find the exact method (copying the nk.nbf file to SD & running bootloader doesn't do anything. If I manage to sort this am I able to upgrade the bootloader to 2.x?
Thanks.
Chameleon: not charmer official ROM. Prophet ROM!
guys ...
few month ago i had instaled HTC ROM ... and it's working on my X1i ...
but i think it little bit slowly ...
then now i want to restore it into my original X1i rom ... i had download it from rapidshare ... i format my micro sd card ... then copy it on it ...
then i flash it ...
but i can't boot it ... just stop in SE logo ...
anyone can help me to turn my X1i back ...
please ...
T.T
Try to flash another official ROM, i.e. a previous version (R2AA, R1AA) or just connect to SEUS and let it flash your X1
Same issue
[email protected] said:
Try to flash another official ROM, i.e. a previous version (R2AA, R1AA) or just connect to SEUS and let it flash your X1
Click to expand...
Click to collapse
i have same isue
after installing windows 6.5 i cannot use TOMTOM in my fone always hang and neeed to remove battery and plug it back again
and on right top task bar icon is not appearing and due to this i cannot close or end any application
want to roll back to original ROm and i didnt figure out on net
if possible can you email me the link on masimk3 at h o t m ai l. c o m
Thanks
Asim
knuckle89 said:
guys ...
few month ago i had instaled HTC ROM ... and it's working on my X1i ...
but i think it little bit slowly ...
then now i want to restore it into my original X1i rom ... i had download it from rapidshare ... i format my micro sd card ... then copy it on it ...
then i flash it ...
but i can't boot it ... just stop in SE logo ...
anyone can help me to turn my X1i back ...
please ...
T.T
Click to expand...
Click to collapse
I'll try to help :
1. Unpack the file you've downloaded.
2. Rename the file (without quote) to "kovsimg.image" or "kovsimg.nbh" and make sure it's not "kovsimg.image.image" nor "kovsimg.nbh.image"
3. Copy the file to your micro SD card.
4. Turn off your device and release the battery for few seconds then turn it on again, bring i to boot-loader mode by by holding the "volume down" button on the right, and holding the power on button until you see the tri-color screen. Just follow the onscreen instruction. I believed you have known this method, otherwise you can read this.
5. If you don't have a plan to flash custom ROM again, restore to stock SPL. Find it and read the instruction here.
Just do search my friend, you'll find the answer.....
masimk said:
i have same isue
after installing windows 6.5 i cannot use TOMTOM in my fone always hang and neeed to remove battery and plug it back again
and on right top task bar icon is not appearing and due to this i cannot close or end any application
want to roll back to original ROm and i didnt figure out on net
if possible can you email me the link on masimk3 at h o t m ai l. c o m
Thanks
Asim
Click to expand...
Click to collapse
It is not the same issue. You have a compatibility software issue, that is normal since you are running a beta ROM or a software that was not designed to run on WM6.5. Knukle89 has a ROM issue, i.e. his phone doesn'e even turn on.
Follow bulux instruction or/and read this thread http://forum.xda-developers.com/showthread.php?t=431218
still can't work ...
i had run SEUS ...
but when identifying phone it always says that " the phone can't identified ... please reconect the USB "
i try it again n again but still no use ...
hard reset maybe?
Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(
now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...
ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony
thanks now everythink is write ..
now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.
for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question
tony i need your help
got an x1 the other day, and i want to mod it, you know , with a a wm 6.5 build and some x2 panels etc, but i can't make it to work, if i try it over the pc i get error 262 and it freezes at 0%, if i do it over the sd and put a KOVSIMG.nbh it hangs at loading, i letf the phone alone for 15 min, and still didn't got past the loading...what do i do wrong, can i ever mod my xperia, as i can tell it's unlocked but it has a vodafone branding on it, i've searched the xda-forum the past day, but i couldn't find anything that i can apply to mine, help me please !
Andrei said:
got an x1 the other day, and i want to mod it, you know , with a a wm 6.5 build and some x2 panels etc, but i can't make it to work, if i try it over the pc i get error 262 and it freezes at 0%, if i do it over the sd and put a KOVSIMG.nbh it hangs at loading, i letf the phone alone for 15 min, and still didn't got past the loading...what do i do wrong, can i ever mod my xperia, as i can tell it's unlocked but it has a vodafone branding on it, i've searched the xda-forum the past day, but i couldn't find anything that i can apply to mine, help me please !
Click to expand...
Click to collapse
you need to install h-spl first before trying to flash a custom rom
cheers
Hi gays. I need some help please...
The problem is - i can not make Hard spl..
So I should tell from the beginning..
It is my second Xperia X1. With first one i had no problems at all. I v´e done
Hard SPL, changed some custom FW´ etc.. Unfortunately my first Xperia X1 was stolen..
So I bought a new one, With T-Mobile Branding..
First of all I need to make Hard SPL, I donno why, but PC method do not work for me it stucks with 0%, so i decided tio make Hard SPL with SD Method.
I have 2Gb Sd formatted in FAT32
I have downloaded 3 SPL:
Original 72.000
72.Olinex
78.Olinex...
So if I copy 78.Olinex to sd card and rename it to Kovsimg.nbh and start phone with pressed Volume key and power button it goes in Tri-color Boot Mode and hangs with Loading...
IT IS WITH ALL SPL´S AND CUSTOM ROMS
I tought it is because Branding, so i have downloaded Generic Rom, and flashed it with SD..
THERE IS NO CHANNGES, STILL NO CHANCE TO FLASH OLINEX SPL, HANGS ON LOADING....
Please help me...
hi every body
i have problem my xperia not run and give me we i turn on it the logo of sony ericsson only and still along and not open . what the solution please
Have you tried to install another Operating System on it and this has happened?
If so, or not, check these links:
This one for a new original ROM:
http://forum.xda-developers.com/showthread.php?t=1452766
This one for HardSPL (if you haven't done it yet):
http://forum.xda-developers.com/showthread.php?t=497511
All Credit to the original posters
Hope this helps
Aseteo