Upgrading from 6.1 to 6.5 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I'll be honest, this is my first smart phone and I just got it 3 days ago. I've been online reading about this phone almost non-stop (even at work) and I want to make this phone my best friend. I've already done some experimenting: overclocking with omap, attempting to keep it OC'd with smartskey, installing SPB mobile shell on top of the rom, installing ringtones, installing galarm (but not figuring it out), installing resco in conjunction with smartskey in the attempt to keep the phone OC'd. I've read the wiki, I've read the upgrade installation sticky, I've searched, and I still can't find anyone with the same question that I have.
HOW CAN I UPGRADE FROM WM6.1 SNN EDITION TO WM6.5, OR TO ANY OTHER WM6.1 ROM?
I'm not sure if it's self explanatory and you can upgrade to 6.1 or 6.5 or back or whatever, but I can't tell. I'm really really new at all of this and I'm hoping to get a lot of nice people to help me fall in love with my phone. The main thing that confuses me about the whole ordeal is the fact that when I had received the phone it already had WM6.1 SNN Edition installed on it. I have no idea what that is, but I'm not a fan. I'd really like to know how to upgrade to a newer rom, if that's even possible.
So here' s a prioritized list of some things I want to do and any help for any of them would be greatly appreciated!
1. Upgrade to a newer, faster, over-all better ROM
2. Over clock it and keep it overclocked
3. Upgrade to the newest radio
Any help with any of these would be so greatly appreciated! I really want to help out this community by learning my way inside and out of this phone and all other phones I get in the future to help other people like myself fall in love with their phones!
Here's my phone's current info:
Cingular 8125
Wizard Service Tool v4.2.2
03/01/10 21:45:14
=> Bootloaders:
IPL: 2.25.0001 (G4 device)
SPL: 2.25.0001 (G4 device)
Built on May 12 2006 at 00:36:52
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 19202.SNN 3.1 )
ROM: 2.18
Registry AKU: .SNN 3.1
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden

I just got a Cingular 8125 Wizard G4 given to me 3 days ago and this is the first smart phone I've ever had. I'm looking to upgrade it from this strange version of 6.1 that is running on it (SNN EDITION) to one of the 6.5 rom's on here, but I can't seem to find any information that tells me how to upgrade FROM 6.1 TO 6.5. It's all wm5 to 6.1 or 6.5. So far all I've done to this is install some things, uninstall some others, install SPB mobile 2.5 shell, uninstall SPB mobile 2.5 shell, try to get smartskey to work with omapclock, install galarm, overclock to 240 (but cannot get it to stay there after device turns off), install resco for better navigation, install ringtones, upload contacts from SIM. I know very little about cell phones and mobile technology, however I know very much about desktop computers. Essentially what I need help with to make my phone and I best friends are these few things:
1. Know if I can upgrade from 6.1 - 6.5 or how I can get to 6.5 (with some help)
2. Overclock the phone and keep it overclocked after it turns off.
3. Update the radio to 3.02.11 (already have the file just don't know all the rules to radio upgrades and if I should wait to get to 6.5 first or not)
Attempt to run android on the phone (not a priority)
I will truly appreciate all the help I get and I'll make sure to share the information that I acquire with others, and I plan on learning how to cook my own ROM, I'd just like a hand learning HOW to do the basics.
Thank you very much in advance!

Hi there and welcome.
First of all you have to know if your device is or not locked (yours seems to be locked)
then unlock, once its unlocked is very easy, download a ROM from here, the one you migth want to try (try, try and try until you find the rom to you) is very simple, just have to have a fully loaded battery and then flash it will take some mins.
Sometimes the flash bar (indicating the % on the flash way) gets "stuck" on 99 or 100% dont worry, it happens always, dont disconnect, unplug, or do something strange ok?
if still need help, i strongly suggest you to read "how to flash" , "how to unlock g4 devices"
Good luck

Here's an update. I have flashed to another ROM (I can't seem to find the page I located it on, hopefully my info in the signature will allow someone to tell ME what it is), I've flashed to the newest radio (3.02.11), and I've got it overclocked, but AGAIN it does not STAY overclocked when the screen goes dark or if I hit the power button (I don't know what mode that is called).
Here's what I've done to Overclock, please tell me if I've done something wrong.
I've copied OmapClock.exe, smartskey.exe, and smartskey.ini into the '/Windows' directory on the phone. Here's what my smartskey.ini file looks like:
; INI FILE MUST BE SAVED IN UNICODE, PLEASE USE NOTEPAD TO EDIT IT
[MAIN]
; set LSKEY to 1 if you want to override Left Soft Key (DEFAULT 1)
LSKEY=1
; set RSKEY to 1 if you want to override Right Soft Key (DEFAULT 1)
RSKEY=0
; set VOLKEY to 1 if you want to override Volume Key (DEFAULT 1)
VOLKEY=0
; set DPAD to 1 if you want to use dpad to launch call log, contacts in phone app (DEFAULT 1)
DPAD=1
; set CLOSEAPP to 1 if you want to close app instead of hide (DEFAULT 0)
CLOSEAPP=1
; set STARTONREBOOT=1 to 1 if you the program to be start automatically during
; reboot, use with RSKEY (DEFAULT 0)
STARTONREBOOT=1
; set VOLUMEONPHONE=1 if you want to set volume using volume key in phone app
; use with VOLKEY (DEFAULT 1)
VOLUMEONPHONE=0
; set VOLUMEONTODAY=1 if you want to set volume using volume key in today
; use with VOLKEY (DEFAULT 1)
VOLUMEONTODAY=1
; use with lskey, rskey (DEFAULT 1)
PAGEONEXPLORE=1
; set OMAPCLOCK to the clock if you want to use omapclock and automatically
; set the clock speed after wakeup, you should put OmapClock.exe in the same
; directory of smartskey.exe
; REMEMBER TO REMOVE ';' BEFORE THE LINE TO ENABLE IT
OMAPCLOCK=240
;REMOVEDUPSDDAEMON=0
;STARTMENUMETHOD=0
;DUP=0
;DDOWN=0
;DRIGHT=0
;DLEFT=0
; if you set CLOSEAPP to 1, the program will hide the following
; apps (by title) instead of closing. Other apps will be closed.
; maximum can set 16 apps
[EXCEPTIONLIST]
APP00=Text Messages
APP01=Outlook E-mail
APP02=Hotmail
APP04=MMS
APP05=Contacts
APP06=Calendar
APP07=Camera
But still sometimes it goes back to 180mhz after the screen goes dark or I hit the power button. It seems to be actually booting up from a hard reset with it overclocked, but it's also spotty. Any suggestions?!?!

Related

TuMa v1.1 - ALPHA - WM5 ROM - Wizard Ported to BA

Ok everyone, the next "incantation" of the TuMa ROM is now available!
This ROM is a radical expansion and departure from mamaich's original. I've replaced a number of elements which were OMAP code, with XScale code - taken from the Himalaya, Jasjar, and various ROMs I have had access to. I've also upgraded some applications, and put duplicates of different versions in as well (to determine which is better), and have added other various features, tools, and widgets.
The ROM requires a fair amount of testing now, and the only way I believe this can be done would be to let "everyone" at it and see how it goes. There is a LOT of untested functionality in the ROM, as I don't have access to a number of devices or configurations. So, feedback is definately needed!
There have been a LOT of changes in this ROM, and because of this I'd like to term this ROM as being an ALPHA version. If you have the will and the way, give it a go. I'm finding the performance even better (so far) - but it's only been an hour of testing, and in truth ... I've only managed to test very little of it. 8)
Considerations for this ROM:
All core elements of WM5 are now in the ROM. This includes the previously removed Pocket Powerpoint, Excel, and other files. So, all of the CAB files which I've created specifically for this ROM can be OPTIONALLY installed!
There are now 3 CABs by default in the EXTROM folder:
1). Midlet Manager
2). Arcsoft MMS Composer
3). IA Camera
This means that the ROM should be directly usable in devices without a Camera. If you have such a device, then make sure that you don't install the CAB file (just cancel it)!
If you do have a Camera, you MUST install the Camera AFTER the MMS Installation, as I've chained the two installations together. MMS will install without Camera, and then the Camera CAB will enable the Camera in MMS Composer.
One thing - localization is set to "New Zealand" (since that's where I am), so some of you will need to change this back to your region. (Sorry - it's my ROM after all )
The ROM is in /Uploads/Blue Angel/wm5_test/WM5 BA - TuMa v1.1.zip
Contents: nk.nbf, and the EXTROM folder with CAB files - so, update the operator and Flash away ...
Explore the features, test all of the elements, and let me know if everything is working properly.
All the best of luck with it!
*** D-OH! First Bug ... The "Contacts" SoftKey is wrong ... just open up the SoftKey Control Panel Applet and reset it ... works fine then. Sorry Guys. :-(
Is it possible to put a direct link to the file? I can't really find it...
I get a checksum error using BAUpgrade; MaUpgradeUt doesnt show any rom info. This is what i have always used to fix my roms previously
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -sd PH20B -so O2___001 -sl WWE nk.nba
xda3nbftool -c -u NK.nba
xda3nbftool -x nk.nba nk.nbf 0x20040521
Anything wrong here?
Edit: I was in bootloader mode
Hello efjay, could you help me here? I can't really find the file to download
raymondu999 are you using an FTP client? Thats probably the best way to get it.
Edit: try this link ftp://ftp.xda-developers.com/Uploads/Blueangel/wm5_test/WM5 BA - TuMa v1.1.zip
No actually, I'm only going the ftp://xd[email protected] whatever thing...
Does it work for you? Or is it my computer that's acting funny and not letting me download it?
Actually, nevermind, efjay, it's working for me now. THANKS A LOT!!!! I owe you one!
No problem, pls post if you are able to flash ok. I seem to be stuck.
No problem, willdo. However, don't expect anything too soon... My internet is slow as hell, so I'll be downloading for a looooooooooooong time....
Hi All
First post so please be gentle LOL
Flashed rom ok but have doubled up on programs (exel x2 word x2 etc)? tried reflashing /hard reseting but with no luck this rom is faster than any other i have tried and some nice additions too...
will let ya all know how i get on
any ideas on the double programs would be most greatful
cheers for now
Nic
Oh thanks for all your time and work on these roms u guys are somthing else
nks said:
Flashed rom ok but have doubled up on programs (exel x2 word x2 etc)? tried reflashing /hard reseting but with no luck this rom is faster than any other i have tried and some nice additions too...
Click to expand...
Click to collapse
Hmmm ... I had this as well when I was building this ROM myself. I think it's because some folders have been specified as "PermDir()", and the shortcuts are being kept.
For anyone experiencing the same problem try this:
(NOTE: This will require a HARD RESET & REBUILD)
1). Run "File Explorer" and goto "My Device"
2). Tap and Hold "My Documents", then select "Delete" and delete everything
3). Tap and Hold "Program Files", then select "Delete" and delete everything
4). goto "Windows"
5). Tap and Hold "Start Menu", then select "Delete" and delete everything
6). Tap and Hold "Startup", then select "Delete" and delete everything
Then HARD RESET your device, select "Format Storage", and "Clear Registry", and the duplicates should be gone.
I think I may have messed something up in the formatting specifications for the Flash Storage device ... i.e. it checks the existing format, and if it's still ok, it keeps all permament items around. This is probably BUG #2. *sigh*
Let me know how you get on ...
nks said:
Oh thanks for all your time and work on these roms u guys are somthing else
Click to expand...
Click to collapse
Just hoping that this will solve my issues with the device, and be useful for other people too. 8)
Cheers Tuatara
Followed steps 1-6 and it looks ok now :lol: will do some more testing tomorrow with gps,phone,sms etc and let you know...
nearly 3am here in uk so time for bed
thanks again
Nic
Tuatara said:
For anyone experiencing the same problem try this:
(NOTE: This will require a HARD RESET & REBUILD)
1). Run "File Explorer" and goto "My Device"
2). Tap and Hold "My Documents", then select "Delete" and delete everything
3). Tap and Hold "Program Files", then select "Delete" and delete everything
4). goto "Windows"
5). Tap and Hold "Start Menu", then select "Delete" and delete everything
6). Tap and Hold "Startup", then select "Delete" and delete everything
Then HARD RESET your device, select "Format Storage", and "Clear Registry", and the duplicates should be gone.
Click to expand...
Click to collapse
Installed the upgrade, did note the above problem. In step 2) and 5) files exist that prohibit the folder deletion, like PIE in step 5. Not sure why I get a different response than nks. Ended up deleting the duplicate entries in the Start Menu.
This version is much faster, great work.
rschell said:
1) Noticed the Double menu items, can delete some directories.
2) Noticed that the activesync connection does not remain connected. I have to disconnect and reconnect
3) Sound issues with WM Player playing off a SD card remain until the buffer is full (about 1 min into the song)
Will keeping probing for other issues.
Click to expand...
Click to collapse
Thanks heaps for the feedback!
Right ... I think my reworking of the Flash Storage specification - while improving the performance, has had a few other 'odd' side effects. Probably the SD Card buffering/paging has been affected, and similarly resulting in the double menu items.
As for the ActiveSync disconnect issue - I did have that happen to me just now as well. Very strange though, I simply opened another "explorer" window, and everything came back immediately. Maybe I've changed the timeouts/timing for the usb driver too much.
One really BIG question though - since you're using a SX66, did everything work flawlessly for you with respect to the NON-Camera installation (i.e. just cancelling the CAB install?). Is MMS fully operational and everything else working?
I'll try to have a look into this sometime (very late) tonight after I get my "real" work done now.
Oh ... and on the "bad news" front ... I'm going to be away again for another 2 weeks now - this time in Germany, going to be exhibiting at Cebit - leaving Sunday. *sigh* a bit last minute and unexpected all this.
Hopefully though, I'll have time enough to do some patches or an upgrade to the ROM for anything which is found before that time. So keep testing and letting me know!
Hello Mr. T Great work by the way !!! it really works great, much faster and responsive!! you will be a saint for all us geeks !!!
I have my first bug to report! in hopes of furthering the development.
there is no support (at least for me) for MIDI as ring tone, it does not play. also I get the following error when trying to play in WM "The source filter for this file could not be loaded."
well just happy to report! cheers!!
Great Work!!
another thing, I really believe that the problem with WM5 for BA is the phone side of the ROM I really think that there is an incompatibility issue here. because when I use the device with Radio off, it works perfect! on every issue.
Tuatara said:
One really BIG question though - since you're using a SX66, did everything work flawlessly for you with respect to the NON-Camera installation (i.e. just cancelling the CAB install?). Is MMS fully operational and everything else working?
Click to expand...
Click to collapse
I deleted the Camera CAB and modified the cfg.txt file before copying the files to the EXTROM directory and flashing, same effect as cancelling the CAB install. It installed without error. I tried installing the camera cab on an earlier version with no adverse effects on the SX66, but I prefer not to have it around in the PDA. I like the option to pick and choose what to install.
I'm not a user of MMS right now, so I can't tell there. Pocket MSN works. The activesync connection dropping out does have something to do internet access, connection stays active until an attempt to connect to the internet. MSN and FTP don't appear to use the activesync connection when it is available.
Wifi works, but I can't thru the portal at the hotel I'm at tonight, so I can't do a full test. Don't have my bluetooth adapter with me to check it.
Removed the screen rotate tool from the tray, I prefer the special button 9 on the keyboard for that function.
SysCrasher13 said:
I have my first bug to report! in hopes of furthering the development.
there is no support (at least for me) for MIDI as ring tone, it does not play. also I get the following error when trying to play in WM "The source filter for this file could not be loaded."
Click to expand...
Click to collapse
Move the desired ringtone to the \windows\rings folder and it should work, it does for me.
rschell said:
Tuatara said:
... SX66 ... NON-Camera installation ...
Click to expand...
Click to collapse
I deleted the Camera CAB and modified the cfg.txt file before copying the files to the EXTROM directory and flashing, same effect as cancelling the CAB install. It installed without error.
Click to expand...
Click to collapse
That's great to hear ... and no slowdowns either I presume, which is very good news for SX66 users now.
rschell said:
I like the option to pick and choose what to install.
Click to expand...
Click to collapse
Yeah ... I think a lot of people are like that - so having the choice to add MMS, Camera, or Midlets lets everyone decide to keep just what they want.
rschell said:
Pocket MSN works.
Click to expand...
Click to collapse
Oh ... forgot to mention in my first post ... Pocket MSN was also updated to the latest version I could find/merge into the ROM.
rschell said:
Removed the screen rotate tool from the tray, I prefer the special button 9 on the keyboard for that function.
Click to expand...
Click to collapse
NOTE: This is very easy to do for anyone else. All 'accessories' are simply loaded in the /Windows/Startup folder, so if you don't want something (like Cyberon Voice Dial, or Screen Rotate, or psShutXP, etc.) you can simply remove it from this directory, or disable it, and it'll no longer run. Similarly, all buttons are now configured as configurable buttons (not hard coded through registry, etc.) This way you can easily customize the device how you like it.
Remember, it's also not using any of your Storage memory for these 'extra' applications - so there's no cost in having or deleting them.
I'll check the board again in a little while ... must get back to work! I might be able to make a v1.1a later tonight, which will hopefully correct some of these initial problems which have been found. (If I find the time ... )
hello all ...
im not try this new ROM but 1 question... ist work to use BA as modem with this ROM ???
thanks in advanced...

TuMa v1.3 - BETA - WM5 ROM - Wizard Ported to BA

Updated to TuMa v1.3 ... all in the quest for perfection!
Apologies for the "fast" update to the previous ROM, but there were a number of things which DID need fixing and improving, especially the filesystem bug, and I believe I've accomplished that now.
All of the bugs and issues which were mentioned in the TuMa v1.1 thread (I believe) have been addressed - except for the BlueTooth disconnect issue. However, I have news directly from mamaich, that he is looking into the BT issue, and will hopefully have a solution soon.
The BIGGEST and BEST news is that my Phone RINGS after 1 RING now!
Although for this to work it is REQUIRED that you use a WAV file for your RingTone. Converting any MP3, WMA, or whatever into a WAV is a simple exercise - but it just uses a LOT of storage space. I've made a new "LoudOldPhone.wav" file, and set it as the default ring in this ROM. Test it out first and let me know your results.
TuMa v1.3 removes the LoudOldPhone.wav, and has all the standard Ring Tones converted to WAV format appropriately, so that ALL default rings will RING the phone quickly.
NOTE: The WAV file RULE applies for all NOTIFICATION sounds as well. Ensure that you choose only WAV files for these elements, and you'll have a snappy Blue Angel!
TuMa v1.2 (Wizard Port) Features:
- Originally based on the Wizard Port by mamaich
- OS and Application extracted from Himalaya, Jasjar, Wizard, and other ROMs
- Core Applications entirely contained in the ROM - Additional CABs not required
- EXTROM is now available again! You can repartition the EXTROM as you wish
- Quantum Timing (Thread Switching) set to 25ms timeslice (performance boost)
- Filesystem Performance improved (maximized), while still retaining reliability
- Notification and Phone Ring Time Improved (MUST USE xxx.WAV FILES!!!)
- Numerous other OS Level Performance Tweaks and Improvements made
- Useful Applications added to Startup Folder (easily disabled)
- So you can easily add whatever you want to this "base" ROM
TuMa v1.3 (Wizard Port) Features:
- Fixed Voice Command Registry Bug. Now you can remap the button as desired without registry hacking.
- Converted all Standard/Default Ring Tones to be WAV files for FAST Ring Times (with maximum volume)
- Fixed the Arcsoft MMS CABs to put the media files into the correct/best folders (avoid Ringtone issues, etc.)
- Fixed the HTC Camera CABs to NOT reset the MMS Manager DLL Entries if a different MMS Manager is used in future
- Added the RamDisk version of the Camera CAB for those who want to use it (must edit your EXTROM)
- Removed the Waterfall.jpg, and Flower.jpg default images, since I ran out of space in the ROM :roll:
- Fixed a Spelling and Versioning mistake in the v1.2 ROM
- Updated the readme.txt in the TuMa v1.3 ZIP file ...
There are presently 3 optional CAB files. During installation you may simply CANCEL the installation of the CAB file, and not have the feature installed.
i.e. Users with a SX66 will NOT want to install the HTC Camera application.
* MidletManager-TuMa.cab - Installs the Java Midlet Manager
* ArcsoftMMS-TuMa.cab - Installs the Arcsoft MMS Composer (NOTE: You must create an account)
* HTC Camera-TuMa.cab - Installs the HTC Camera and updates MMS for Camera operation on device
TuMa v1.3 adds:
* HTC Camera-TuMa-RamDisk.cab - Installs the HTC Camera and updates MMS for Camera operation on "Temp Disk"
Camera users will want to CHOOSE which Camera CAB they use. You can either rename the CAB file to be the same (without the "-RamDisk") or change the "Cfg.txt" configuration file to suit your choice.
I've included FULL installation instructions, and the "BaUpgradeUt.exe" and support files into the ZIP file. Please read the "readme.txt" file for full upgrading instructions. There is a SetOperator.bat file included in the ZIP which will make setting the Operator ID a "piece of cake" now. 8)
The EXTROM files are unchanged from TuMa v1.1 for those who are upgrading to v1.2.
The EXTROM files are different for TuMa v1.3. Use the new ones for best results. 8)
FYI: For anyone providing feedback, I will be leaving for Germany (from New Zealand) on Sunday, so I'll only have until then to respond and/or make any updates/patches or corrections. Hopefully there won't be any!
Most importantly now ... Download from here:
*** Edit: Fixed download locations ... again! ***
Download Tuma v1.3 (recommended)
ftp://xda:[email protected]/TuMa 1.3/WM5 BA - TuMa v1.3 - Release.zip
ftp://xda:[email protected]_Updates/TuMa 1.3/WM5-BA-TuMa.v1.3.rar (Probably just a repackage of the above ???)
All other WM5 ROMs are also located here:
ftp://xda:[email protected]/BlueAngel/BA_WM5/Shipped_Extracted_Updates/
Look around!
That's all ... enjoy the ROM.
thanks
thank you and god luk
Go GO Go Tuatara...
Make we Blueangel Great & Fast !!
:lol:
Feature & Upgrade Information ...
paullim29 said:
Not sure if anyone has this... The top of the screen seems to covered by 1 px of blue & black line.
Click to expand...
Click to collapse
This is actually a battery meter! Check out the "Battery Meter" in "Tools", and you can configure it as you wish. It's a very low-low overhead way of having the battery status at a glance. As always, if you don't want it - simply remove the shortcut from the "Startup" folder and it's gone.
paullim29 said:
By not doing so, all my installed applications are still there after the upgrade.
Click to expand...
Click to collapse
When upgrading the ROM, it is VERY STRONGLY recommended (scratch that REQUIRED!!!) that you perform a full HARD RESET of your device, and Clean the Registry, and Format the Storage (read the readme in TuMa v1.2). By not doing so you run the risk of having corrupted registry information, and you will NOT have the benefit of the changes made in this ROM.
It will then run slowly, it will have problems, and it will give random errors nobody else has. In essence, your device will be running a new ROM with old instructions ... not a good look.
So, it's still your choice (I can't hit the buttons for you) ... if you don't do it YMMV. 8)
I luv u Tuatara ! :lol:
But I have question, why don't changing Splash Image??? :?:
Is it still have a color strip when u do hard/soft reset ?
How fast (percent) if u compare with ROM Wizard To BA v2 ?
Thanks
Nice release, Tuatara, can't wait to get home and try it out. WIll do the wiki page too.
I'm using your grea new update but for me the same problems ....
No bt Headest , and no mms.
I've had an hard reset but no cleaning registry ...
Regards
cescof said:
I'm using your grea new update but for me the same problems ....
No bt Headest , and no mms.
I've had an hard reset but no cleaning registry ...
Regards
Click to expand...
Click to collapse
Like I said in the post above ... you NEED to clean the Registry (and Format Storage to get the performance increase). If you don't do that, you're running your new ROM on old registry settings, and you end up with something which MAY or MAY NOT work. MMS for example isn't working for you ... other things probably won't as well. Sorry, but it's an excuse to BACKUP everything (not registry!), and then clean out the chaff on your device.
Think about it as if you're upgrading Windows 98 to Windows XP. I can't really think of anything more "evil" ... If you ever did this, you know that you have to pray your machine still boots afterwards.
In other news ... mamaich is HOT on the heels of a BT fix ... PLEASE DO NOT PRESSURE HIM - It will be ready, when it's ready.
Watch this space [ ].
i am having a problem setting the record button to the record function on my sx66. it is consistently the voice speed dial program. i use windows voice command anyhow so i was wondering if you can make the voice speed dial optional unless many people find it absolutely necessary
Camera is installable on "Temp Disk" !!!
For the "cool toys" department ...
mamaich asked me if the additional CAB files could be installed into the "Temp Disk" (RamDisk) instead of into storage, since re-installing those CABs if power is ever lost is trivial. Well, I tried to modify the Arcsoft MMS, and the Midlet Manager - but I was unsuccessful.
However, (comma ... pause for dramatic effect)
The Camera CAN be installed to the Temp Disk, freeing up another 1.5Mb of Storage! This is especially useful for those who don't use MMS, and couldn't care about having Java Midlets running on their device!
Now you CAN have a device with the WHOLE STORAGE SPACE available, including your (now probably miniscule like mine @ 128Kb) EXTROM !!!
ftp://ftp.xda-developers.com/Uploads/Blueangel/wm5_test/HTC Camera-TuMa-RamDisk.cab
You CAN install this CAB after uninstalling the original CAB, but you will need to soft reset your device to have the Camera detection & initialization happen properly.
Better yet, you can replace it in your EXTROM (rename the file and/or edit the config file) before doing the TuMa v1.2 upgrade. 8)
Removing Voice Dial ...
joecartoon22 said:
i am having a problem setting the record button to the record function on my sx66. it is consistently the voice speed dial program. i use windows voice command anyhow so i was wondering if you can make the voice speed dial optional unless many people find it absolutely necessary
Click to expand...
Click to collapse
It is (or rather was) entirely optional in the ROM, but it appears that on HARD RESET, the Voice Dial software re-installs itself as the default button handler. *sigh*
This will again need to be added to the Wiki (as before KTamas), but at least it's easier for everyone to do now ...
"Record" button is fixedly mapped to Voice Dial
1). Open up "Regedit" and delete the registry entry "LOCAL_MACHINE\Software\OEM\VoiceCommand"
2). Open up "File Explorer" and delete the "SD Daemon" link from the "/Windows/Startup" Directory
3). Open up "Buttons" (in Settings), and set your "Record" button
4). Return to the "Today Screen", and use psShutXP to Soft-Reset your device.
Presto ... you now have the "Record" button mapped to ... well ... "Record". 8)
Installation Hints ...
For those of you who could possibly still have a shred of patience, I believe it's quite worthwhile to add a little bit of "waiting time" in, when installing this ROM.
When your device resets from the HARD RESET, and the "Windows Mobile" welcome screen comes up and greets you merrily ... wait a little while until the "Blue LED" (on my iMate) stops blinking on the top left (about 15-20 seconds or so).
Only then continue and configure up your device. You'll notice that the alignment cursor, pages, cut & paste selctions, etc. are all 'lightning quick'.
This is because the OS is still booting, starting applications, and building up the registry information in the background.
So, take a little bit of time, and your device will love you for it. 8)
Tuatara
You did it again the ringtone resolve is just great mine rings about half way through the first ring with a converted mp3.
Did some testing with v1.1 yesterday and was happy with that but this looks even more promising..
oh well back to installing tom tom and all the other junk needed for work :lol:
will report back later and let you know how ive got on..
Thanks Again
Nic
Flashed, formatted storage, cleaned registry, MMS still not there.
d3vil said:
Flashed, formatted storage, cleaned registry, MMS still not there.
Click to expand...
Click to collapse
Ok ... like with EVERYTHING in this ROM, I've left it up to you (the user) to add (i.e. configure) or remove (i.e. delete from /Windows/Startup) any or all of the elements you do or don't want. In this way the ROM is a BASE for anything you wish to do, without having stuff installed which isn't to your liking. (Ok, barring the Speed Dialer issue, but that's also easily resolvable).
To configure up your MMS Account do the following 13 step process:
1). Check that you have "MMS Configuration ..." available in your Outlook Menu. If you don't then something has seriously gone wrong. Did you install the "ArcsoftMMS-TuMa.cab" file through the EXTROM or manually? If not - do so now. MMS is NOT available in the Base ROM.
2). Click it, and just ensure that it comes up and is active. The about should say "MMS Composer Version 3.0.7.11"
3). Click [ok] and close it.
4). Menu -> Tools -> New Account
5). Enter "[email protected]" as your email (doesn't matter what). Click Next.
6). Detect settings ... wait ... Click Next.
7). Enter a username "mms" will do. Click Next.
8). Select "MMS" as the Account Type. Click Next.
9). Incoming Server = "mms", Outgoing Server = "mms". Click Finish.
10). Finally ... click "NO" to not download mail for this account.
11). Now go back to Menu -> "MMS Configuration ..." -> Servers
12). Edit and modify the "Sample Server" to your required settings ... (which I can't help you with)
13). Presto ... you now have an MMS account.
Hope that gets you up and going ...
---
NOTE: KTamas ... probably another one for the Wiki ...
Ok, it's there..I just assumed it was the same as previous one, in which i did that procedure, but MMS account type wasn't there. Shame on me
Nice work Tuatara
Having problems downloading your link ... can't be found eoor message.. any suggestions
Solved -- Thanks
Wishtobe29again2
I am having the same problem with downloading. How did you fix it?

Make Your MDA Vario Wizard Work Better - tips and tweaks

Make Your MD Vario Work Better
This document is to save you time and make life easier. Updated from my earlier version.
ROM Update
Current Operating System: 1.6.2.4 (updated 9th March 2006)
Updates and instructions available at:
http://t-mobile.iris-global.com/download_manager_mda_vario.html
If the device appears locked at any stage, please check first the keypad lock isn’t “on”.
UNLOCKING THE SIM
So you can use it with any SIM card eg abroad on holidays with local SIM cards to reduce cost
Go to http://forum.xda-developers.com/
Do a search for the program lokiwiz (current version at this time is 0.3a)
Follow the instructions.
To download it, you must log into the site first. Then the link to the download is displayed. Download it to somewhere on your PC.
 Take out the SIM of your Vario
 Synchronise with PC via activesync
Copy enablerapi.cab to your PDA device (file from lokiwiz zip folder, in utilities folder. It is a zip file and not to be confused with enablerapi.bat)
 Run enablerapi.cab from your device
 Then run lokiwizmsl.bat from your PC, let it run in the DOS window
 DON’T CLOSE THE DOS WINDOW
 If successful, you’ll see your SIM unlock code – write it down
 Now insert a new SIM card and enter that number to unlock your phone
 Once complete, remove SIM card and re-insert your original SIM
 You’re done
Hard Resetting MDA Vario
There are different severities of hard resetting your MDA vario. Which one you use depends on what you are trying to achieve. If your phone is stuck and wont let you play, try the hard core resets (progress from method 1 (less sever) to method 3 (most severe). If it’s just a bit slow, try the soft reset.
HARDCORE RESET 1
start>settings>system tab> Clear Storage
This will still clear all your data and all the programs you have loaded onto your device. You’ll need to start all over again.
HARDCORE RESET 2
I hold the Comm and Voice Button (top two buttons on the side) AND the camera button (bottom right). Keep them pressed in and hit the reset with your stylus. Keep pressed in and let go of the stylus. Release when you see the following message:
PRESS Send to restore factory default,
SEND is the green lift up phone button on the left
It will do a brief format and restore to factory settings.
HARDCORE RESET 3
If your MDA wont budge with HARDCORE RESET 1 or 2, try this:
Enter Bootloader, - hold the "camera" (bottom right) and briefly press the reset button, don't release "camera" until you can see colour screen, connect USB cable, and start to re-flash the ROM (download the latest flash rom update from http://t-mobile.iris-global.com/download_manager_mda_vario.html
SOFT RESET METHOD 1
This is the lightest of the reset methods. This is the one to use if you want to reset your device without having to re-install all your personal programs and data
 Simply press the reset hole with your stylus on the right hand side of the MDA device.
Essential and Non-Essential Programs
See at the end of this document for a guide to some good programs “out there”. Try and decide which you feel are essential must haves and which are not necessary but useful (non-essential). Make two columns on an A4 sheet because this will come useful when setting up you Vario as detailed below.
Setting Up Your Vario for the First Time
1. Unlock your SIM card as above if you ever plan on using it on another network – If you got your phone from T-mobile, it’s likely that they’ve locked it so that you stay with them. However, it is your phone and it’s not illegal to unlock it: so unlock it in case you want to use it with another mobile network provider or even use a different local SIM card for instance when you are on holiday in Spain or somewhere (much cheaper way of making calls whilst abroad)
2. Install all the ESSENTIAL programs you will always want
3. Tweak the settings of all the programs you use eg setting Mobile Word to store documents on the storage card rather than eat away at your valuable device storage space. A full list of tweaks for programs I use can be found in the “Program Configuration” section at the end of this document.
4. Now BACKUP that device using software like SPB Backup so that you can always reset your device to this point if you ever get “stuck”. Call it something like “BACKUPESSENTIALPROGSANDTWEAKS”. ENSURE ALL BACKUPS ARE STORED ON THE SD CARD. With a program like SPB Backup, the backups are stored as self executable files on the storage card so that when your MDA goes pear shaped, you can simply reset it, insert your SD card and click on the back up file to restore your device without having to even load SPB backup again! How cool is that? Especially when you are on the move.
5. Then install the Registry Wizard program to help you tweak your PDA phone. You can download it here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
but you have to have logged into the site to see the downloadable files.
This really is a super program that you’ll be glad to have installed. However, I found that if you change the default input from keyboard to something else, your device may lock itself; leave it at keyboard and everything should be Ok.
To install, download the latest version or RegistryWizard AND the OpennetCF programme to your storage card. These are cab files and they might appear like zip files. Insert the SD card back into the device and navigate to where you stored them using your device’s file explorer (or something similar). First install the OpennetCF program (bottom of the list of the downloadable files in the link above) into the device memory. Second install the latest version (1.0T) of the RegistryWizard to the device memory. You install them simply by clicking on them. Once installed, soft reset the device (
Now tweak it as required
6. Install the camera patches – to make your camera work better
You can find the files on these links: (again, you need to be logged in to see the downloadable files)
http://forum.xda-developers.com/download.php?id=10524 : for the camera fix which gets rid of any speckling (a permanent fix that remains on hard resetting)
http://forum.xda-developers.com/download.php?id=10396 : a fix to make the camera image more sharper (needs re-installing after any hard reset)
http://forum.xda-developers.com/viewtopic.php?t=45123 : a list of discussions about these two fixes
The camera will work best on the auto setting and much better than before.
If you know how to registry tweak, consider this:
Increase camera frames per second: this tweak will let you increase the frames per second of the video camera to make more fluent movies:
HKey Local Machine\Software\HTC\Camera\ReParam\MP4Large (or Medium or Small).
Change the FrameRate value from 10 (default) to 19. Above 19 it is laggy .. so don’t go above it.
7. Synchronise your device with your PC to load calendar, diary and contacts.
8. Alter active sync settings to how you want them eg Tools>options>email; set to 2 weeks, 5Kb, max 50Kb attachments, Click OK. PDA will re-synchronise
9. Consider backing up again after this point. Call it something like Backupstage2. If your device causes problems for what ever reason, you now have two options where you can reset your device to.
10. After that, you can start installing programs that you’d like to “play” with. If things go wrong or the system slows down, no worries  you have a backup of the essential ones anyway.
A Note on the Two Backups
You might be wondering why the need for the two types of back up. Let me make this clear: you only need to do these backups ONCE. The two back ups then give you the flexibility of restoring to whichever point you want to when the need arises. Don’t ever delete these three backups.
Having said this though, don’t forget to regularly back up your device just to keep the most up to date back up at hand in case your battery goes dead and you simply want to restore it back to the last configuration (with email, calendar and contacts data). SPB Backup utility is ideally placed for this.
Resetting Your Device – if it starts to play up
1. Consider a soft reset, if this fails then do a hard reset (details above)
After the hard reset:
2. Run your back up program eg “BACKUPESSENTIALPROGSANDTWEAKS” ( to re-install all your ESSENTIAL programs
3. Then install the registry wizard program to help you tweak your PDA phone
4. Install camera patches (if you’ve installed the de-speckler before, u don’t need to do this particular one again)
Remember, install OpennetCF cab file first into the device memory; second install the latest version (1.0R) of the RegistryWizard.
Now tweak it as required
5. Synchronise your device with your PC
6. Voila! Your ready to go.
1. Essential Programs – all on www.handango.com
Program Location to Save to Notes
Pocket Informant DEFAULT DEVICE Great diary, contacts, tasks program; use international version
SPB Pocket Plus DEFAULT DEVICE for the X close button utility
Solvoed EngSpa Ultralingua SD CARD Spanish Advanced Dictionary
Paragon Spanish Sound Gold SD CARD Spanish Sound Module for the dictionary
SPB GPRS monitor DEFAULT DEVICE Monitor your data transfer when browsing the web to ensure you don’t exceed your monthly limit
SPB Backup ABSOLUTELY ESSENTIAL SD CARDSimply the best backup utility – backs up registry, PDA settings and programs all into one little executable program that you can save on your SD card and restore without even needing SBP backup loaded when your PDA goes funny
Vidya Pocket Registry Editor DEFAULT DEVICE Necessary for making the registry tweaks outlined below. Simplifies registry editing.
OMAP overclock ABSOLUTELY ESSENTIALDEFAULT DEVICE The MDA Vario has a TI OMAP processor running at 180 MHz. With this utility, improve performance by increasing it to max 240 Hz (some say 264Hz is the upper limit). Read instructions below; need to add an instruction to the startup menu to ensure it always runs at the set rate on soft-resetting the MDA (rather than defaulting back to 180 MHz)
Memmaid Tweaking program DEFAULT DEVICE Again, needed for processor clocking, BUT has a great clean utility to clean out all the crap that cumulatively builds up with use.
Resco File Explorer SD CARD Super program for finding the files you want. Much better than the file explorer in WM5
SMARTSKEY ABSOLUTELY ESSENTIAL DEFAULT DEVICE A nifty little program that enables you to operate your MDA with one hand without the need for getting out the stylus. It does this by reconfiguring the buttons on your PDA so that a quick press of them does what they already do but a longer sustained press adds new functionality.
Read instructions below; the program already has an inbuilt startup instruction to set it to restart on reboot; smartskey will automatically set the OMAP clocking facility to 240; this means you can install OMAP and let smartskey do the tweaking.
NON ESSENTIAL PROGRAMS:
 Home pocket mobile inventory
 My Last Cigarette
 Speedreader (heavy and slow on CPU) vs fast reader
 Vito sketch artist
 Lexionary/English Pro Dictionary
 Bible
 Turboinvaders
 Microsoft Arcade Pack
 Palm games for pocket PC
Specific Program Installation and Configuration Instructions
Today screen = main screen you see
Pocket Informant
Start Pocket Informant (say yes to colour schemes)
Yes to customise it
Yes to make it the default
Add registration code
Start outlook messages on today screen
Menu>tools>options>storage
Click store attachments on storage card
Click  empty deleted items immediately
SPB Pocket Plus
After installing, remove the pink colour on the bar at the bottom: start>settings>personal>today>appearance; select windows default
On today screen tool bar click the system tab of SPB Pocket Plus
Click the house to get the screen display you want (takes time – I like the 5th one)
Then press right hand corner of screen (to the right of where the time is at the top)
Select options
Remove (uncheck the box):
 Safe mode
 Buttons
 File explorer and
 Today plug in
Click ok
OMAP Overclock
Instructions for overclocking Wizard (tested on Imate K-JAM). Use at your own risk!
1. Download the following file and unzip. Save the OmapClock.exe to your \Windows folder on your device: http://forum.xda-developers.com/download.php?id=9181
2. Open File Explorer on your device and open Omapclock.exe. Find the maximum speed that your device will handle without locking up. On each test, test all applications you use. This is important because once you place this in your startup, it will load up automatically and could cause your device to stop responding! 240Mhz works for me. Suspending the device at this point will cause the speed to be reset back to default. Execute Windows\OmapClock.exe again if this happens and you want to continue testing.
3. Download and install Resco File Explorer 2005: http://resco.net
4. Open Resco Explorer and go to the \Windows folder. Locate the OmapClock.exe file and hold the stylus on this file until menu pops. Choose “Copy”.
5. Now browse to \Windows\Startup then hold stylus in an empty area and when menu pops, choose paste shortcut.
6. Hold the stylus on the newly created OmapClock shortcut and choose Properties then click the Shortcut tab.
7. Target should be: “\Windows\OmapClock.exe” –clock 240
Change the 240 to the clock speed you tested in step 2 above.
8. Soft reset and test. Suspending the device will reset the device back to the default speed. This is a secondary test to make sure the device does not lock up!
9. Download and install DinarSoft MemMaid: http://www.handango.com/PlatformProd...23995&R=123995
10. Open MemMaid and choose the Notification queue button/tab on the bottom (second from left) then click the ADD button.
11. For Program, click the browse button and browse to the shortcut you created in steps 5-7. The location of the shortcut is \Windows\Startup.
12. From the event dropdown choose “The device woke up”.
13. Click Add.
14. Soft reset and you are done. The Clock speed will remain at the specified speed you specified in step 7 even when the device comes out of suspend.
Source: XDA-Developers
SmartsKeys
Enables mapping holding softkeys to close apps, open start menu, turn volume slider into scroll slider. Absolutely, the best software I've used on my device. Makes one handed use a breeze. Must register with XDA Developers to download.
The following functionality can be enabled by running the program:
• Tap soft key: orginal Soft Key functions
• Tap and hold left Soft Key: Start Menu
• Tap and hold right Soft Key: Close/OK button
• Volume Slider at the left = Page Up and Page Down
http://forum.xda-developers.com/viewtopic.php?t=41060&sid=fe9919e547cea5c146f1de0d7156a30a
To reset to default, soft reset the phone.
To make the program run after reset, put a shortcut at /windows/startup
Smartskey now includes a configuration file so you can make your own settings like which Soft Keys to alter, whether to use the Close/OK function to really close or only hide a program and an exception list for the Close/OK function.
That’s all great, but the best enhancement is the integration of the OMAP overclock program. From Smartskeys configuration you can overclock your processor to a configurable speed at start up, and even better, have that automatically activated after your devices comes back up from a soft-reset.
You can find Smartskey on
http://htcwizard.westlands.org/wp-content/uploads/2006/02/smartskey0.4.zip .
It includes the program itself, the configuration file and a readme.pdf . It does not include the OMAP overclok program, but I have it here for you:
http://htcwizard.westlands.org/wp-content/uploads/2006/02/OmapClock.exe
2. More MDA Vario Settings to Alter:
Word
Open Word
Menu>Options
Check the box “Save to storage card”
Other Settings
Check the box “Remove from display” (start>settings>today)
Check box “Cleartype”
Start>Settings>Personal>Input>Word Completion>Uncheck “Suggest words when entering text”
Start>settings>Personal>Menus: select which 7 programs you want listing in the start menu
Start>settings>Personal>Owner Information>Set Stuff in Identification; also look at “Notes” and “Options” tabs
Start>Settings>Personal>Today>Items tab: Decide which programs you want in “Today” screen
start>settings>system tab>Regional Settings>Choose your location
Start>Settings>Systems Tab>Screen>Cleartype tab>Enable ClearType
Registry Tweaks
(If you have installed RegistryWizard, you don’t need to read this section as you can do it all easily from that program)
These are all quotes I've compiles from other forums. I think I've done most of these and they work. Select whichever you would like to apply to your MDA device. You're going to need a registry editor. I strongly recommend Vidya Pocket Registry Editor. After you have made all the changes you want, soft reset the device to get them to “kick in”.
Improve Performance Generally
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=8192
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\EnableCache=1
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize=8192
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\
MSFlash\FATFS\Filters\DataCacheSize=8192 [this needs adding]
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ MSFlash\FATFS\Flags=40 [this needs adding]
All values are D-values
Caps/Shift Keyboard Notifier on Screen
Go to:
\HKCU\ControlPanel\Keybd
Create the registry entry called EnableIndicator and assign the DWORD value of 1
After soft-resetting the device, an indicator will appear next to the keyboard icon on the bottom of the screen! Tapping the Shift key shows a "C" while tapping the Dot key shows a dot! Very cool!
Keep the GPRS Connection Active At All Times
Remember, you’re only paying for the amount of data that is transferred; so why not keep the GPRS connection active all the time rather than waiting 1-2 mins for the device to connect every time you want to browse the net? You don’t pay anything for an active GPRS connection when you are not in internet explorer.
HKLM\Comm\ConnMgr\Providers\{7C4B7A3...}\Connections\GPRS...\
change value "AlwaysOn" from 0 to 1
Store Internet Clutter on Your SD Card to Save Device Memory
Put IE cache on storage card instead of memory; this increases the performance of your device. This hack will increase your available ROM memory and people have reported storage gains of over 9 mb. You will need to have a storage card with some free memory installed to utilize this hack.
First open up internet explorer and navigate Menu>Tools>Options>Memory
Press the delete files button to clear the cache
Press delete the cache
Press delete the history
Then open up file explorer from the programs folder in the start menu.
Navigate to the Storage Card and make sure that you are in the base directory of the card.
Then create an I.E. folder and within that folder create a folder called “cache” and “history”
Open up a registry edit program
Navigate to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache"
Change the default value "\Windows\Profiles\Guest\Temporary Internet Files" to "\Storage_Card\ie\cache"
Change the other values in the Shell Folders section of the registry to the folders you created and then soft reset.
Be warned that you will create errors in I.E. if you do not have a storage card inserted with those directories on it while you are surfing from now on.
Get a Different GPRS/EDGE Icon
Registry: HKLM\Drivers\BuiltIn\RIL
Key: EnableDifferGprsEdgeIcon (dWord)
Value: 0 = disabled
1 = enabled
Disable SMS Received Notification – switch it off if it annoys you
Hkey_current_user\software\microsoft\inbox\settings\SMSDeliveryNotify
Change Dword: 1  0=off
Disable Message Sent Notification
Registry: HKLM\Software\Microsoft\Inbox\Settings
Key: SMSNoSentMsg (dWord)
Value: 0 = disabled
1 = enabled
Turn On GPS Application (GPS not GPRS ie Navigation Stuff)
First of all, your MDA does NOT have GPS built-in; let's make that clear from the start.
However, Windows Mobile 5.0 includes a GPS Control Panel for ease of configuring Bluetooth GPS devices. This includes creating 'virtual ports' so that multiple programs can access the same NEMA GPS stream from said BT/GPS device. This is helpful for anyone who uses GPS for Navigation, War-Driving and lots of new emerging location-based programs which use GPS information available to your MDA.
Unfortunately, the Registry Wizard for tweaking the MDA available in this FAQ and over at xda-developers does not work with the T-Mobile ROMs. You have to manually edit the registry by following these instructions:
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2"
The GPS panel will now show up in your connection settings
***Note: You must delete 'Redirect' and 'Hide' keys completely***
Soft restart, wait 30 seconds, restart and viola, GPS Control Panel is now enabled.
NB 2=show; 1=hide GPS icon
How I set-up (after BT pairing with the GPS)
Open the new GPS Icon, I then set my GPS Settings on the MDA for 'GPS Program port:' to COM8 (the 'virtual port' for your programs to access the same GPS data) .
Then set the 'GPS hardware port:' to COM6.
Also set the Baud Rate to 9600 (default for my BT/GPS unit)
Check the box 'Manage GPS automatically'.
I'm using WiFiFoFum2, Socket MyNavigator and VisualGPSce to simultaneously run utilizing my BT GPS device. It works flawlessly.
Enable 802.11g WIFI Speed (rather than the default 801.11b)
For more info:
http://forum.xda-developers.com/viewtopic.php?t=38898
1) Locate the following key: HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
2) Add the following key:
name: dot11SupportedRateMaskG
D value: 8
Glyph Cache
Your MDA uses a section of the memory called glyph cache to store your fonts' glyphs and other graphical outputs for things like gaming. You can modify standard graphic rendering so that games run more smoothly with faster graphics. Noted improvement especially for racing, action and arcade games.
Enable Cleartype in Landscape mode
Clear type smoothes the edges of screen fonts for many programs to make reading easier and make your device appear more slick. You can turn this on by going to Start>Settings>Systems Tab>Screen>Cleartype tab>Enable ClearType
However, if you view anything in Landscape mode (by opening the keyboard for instance); for some reason, landscape doesn’t work in this mode. To enable it in landscape mode too, do this to the registry
HKLM\System\GDI\ClearTypeSettings
Key: OffOnRotation (string)
Value: 0
(NB 0 = on; 1 = off)
Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
Alter Horizontal Scrollbar Width
Registry: HKLM\System\GWE
Key: cyHScr (dWord)
Value: 13 = default
Alter Vertical Scrollbar Width
Registry: HKLM\System\GWE
Key: cxVScr (dWord)
Value: 13 = default
Alter Taskbar Date/Time
Registry: HKLM\Software\Microsoft\Shell
Key: TBOpt (dWord)
Value: 0 = Nothing
1 = Time
2 = Date
3 = Time and date
Enable Bluetooth Receive
Registry: HKLM\Software\Microsoft\Obex
Key: IsEnabled (dWord)
Value: 1 = enabled
2 = disabled
Increase Font Cache
Registry: HKLM\System\GDI\SYSFNT
Key: CS (dWord)
Value: 0 (Default)
4096
8192 (preferred)
16384
Store Internet Clutter on Storage Card
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\shell Folders
Key: Cache (string)
Value: \Storage Card\Temporary Internet Files
\Windows\Profiles\guest\Temporary Internet Files
Disable IE background sounds
Registry: HKCU\Software\Microsoft\Internet Explorer\Main
Key: Play_Background_Sounds (dWord)
Value: 1 (Default)
0 Disabled
Alter the Default Input Method
Registry: HKCU\ ControlPanel\SIP
Key: DefaultIM (string)
Value:
Keyboard {42429667-ae04-11d0-a4f8-00aa00a749b9}
Letter recogniser {42429690-ae04-11d0-a4f8-00aa00a749b9}
Block recogniser {42429691-ae04-11d0-a4f8-00aa00a749b9}
Transcriber ***0034DD0-2AD4-11d1-9CB0-E84BE8000000}
Phone pad {51A2CB38-154E-4C92-A625-A83871C99EC2}
OTHER USEFUL THINGS YOU SHOULD KNOW
Changing the Clock
You can change out of 24 hour clock mode by going to regional settings and choosing a non-capitalized option like hh:mm:ss
Switching between vibrate and ring mode
Hold down the Comm Manager button for a second or two on the side of the device above the volume slider. This will toggle the unit between silent (with vibrate) and your regular ringer on settings.
What do the LED lights on the front indicate?
Left LED:
Blinking blue - bluetooth enabled
Blinking green - Wifi enabled
Right LED:
Blinking green - Phone enabled
Blinking orange - Battery Low
Solid orange - Charging Quote:
Note: the right led blinking orange could also mean that you have an alert in addition to the low battery. It is dependant on how you set up your notifications.
Installing Your Own Sounds for Ring Tones, Alarms and Notifications
You need to have a set of “ring tones” and “alarms and notification sounds” in two separate folders to begin with on your PC.
Make sure those in” ring tones” are in mp3 format
Make sure those in “alarms and notifications” are in wav format
Connect and synchronise your device with the computer
On your PC:
Open the ring tones folder
Copy the mp3 files you want
On ActiveSyn, Click on Explore>My Device>Windows>Rings Folder
Paste them there
On your PC:
Open the “sounds and notifications” folder
Copy the wav files you want
On ActiveSyn, Click on Explore>My Device>Windows
Paste them there
That’s it. Now you should see them all. If you can’t see one or two, it is probably because they are too big in size.
Also I neglected to mention that you can load them on the minisd card (obviously if you have one) to the root folder and they will work. To change it to your new ringone, go to settings > sounds and notifications > notifications tab > change the event to incoming call check play sound and select the sound
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
I hope this document has proved useful.
this is a very very nice guide to wizard starters
That's great! Good work.
Superb!
This is great for new users!
mehayuk said:
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
Click to expand...
Click to collapse
Very useful guide thanks
the bluetooth app for sending messages and bluejacking is here:-
http://www.modaco.com/index.php?showtopic=241921&st=0
or like you say you can send text files via bluetooth
R
help
How do you install .cab files?
Re: help
diesel1218 said:
How do you install .cab files?
Click to expand...
Click to collapse
ActSync them to your device and run them using file manager.
Re: help
diesel1218 said:
How do you install .cab files?
Click to expand...
Click to collapse
1. Open the Drawer.
2. Place Manila Folder in the Drawer.
3. Close the Drawer.
Now it isn't always this easy. If there is securoty in place you will probably need a key or combination to unlock the Drawer before you can open it.
Also, these instructions assume that you have enough space in the Drawer for the Manila Folder and that you don't need to install any "Hanging Device" as it is already installed if needed.
Excellent read
This was a really helpful guide thanks so much for taking the time and care to produce something so readable and useful.
Two things don't make sense to me:
What is the benefit of having a backup that doesn't include my PIM data? Also, even if I could see the point I don't know how to do it. The moment I started installing my "essentials" was the moment that ActiveSync synced all of my PIM data.
Why backup before tweaking the registry? Wouldn't you want these included in the backup so that you only have to do them once?
reg editor on sd card?
do i install the registry editor on the sd card or directly on to the device?
thanks!
does it will work US T-Mobile MDA (not Vario)? thanks
I think we should all help and contribute to updating this. This is a VERY useful guide...as I've only had my MDA for 4 days and I'm learning more and more everday. ..
Re: reg editor on sd card?
simshady said:
do i install the registry editor on the sd card or directly on to the device?
thanks!
Click to expand...
Click to collapse
Either should be fine for programs like that. Generally anything that runs on the today screen should be installed directly to the device, most other programs are OK on a storage card. There are exceptions....best bet is to just give it a try
Bluetooth Messaging
I've seen people send and receive messages via bluetooth with regular phones like Nokia, and I was wondering whether this is possible with a T-Mobile Vario (Windows Mobile 5). Would I need to install any application for this? Thanks.
Well i think theyre not really sending SMS Messages.. these are actually Notes. You don´t need a program for it. Just create a new Note/Text-File and send it via Bluetooth!
If u r still interested
Using "btCrawler" might be solution. Search for in this forum or google I do not remember right now..
That's great mehayuk!!
Very useful!
As you seem quite clued up with tweaks and stuff, u may be able to help me on a couple of other things. (I'm only a n00by!)
I'm left handed, so using the stylus on the scroll bar is fiddly. Is there a registry hack/tweak to swap it to the LHS?
Is there a program to manage GPRS/WIFI more effectively? When I use my mobile at home I connect it to my wifi network to browse the net or go on IM (if I can't be bothered booting up PC etc). Yet my phone still wants to connect to GPRS! Even tho it's got a perfectly good source for checking my emails/browsing etc....
Hope u/someone can help, and thanks again for the guide, you must've put a lot of effort in.
Chewy
Fantastic guide, thanks.
Matt (about 10 days old in the Wizard world - and already my wife hates me/it! lol)
You are a genius for taking the time to make such a long and detailed guide. I wish you had made it a few months before you did because I had to learn it all the hard way
A new user is always lost at first and this guide really puts them onto the right track. Good work!
Smartskey Quirk
For an otherwise outstanding product, you would think they could find a way to make the program memory resident (in other words, not have to be reset every time you do a soft reset). And no, I don't feel like spending more money for memmaid, I already bought more software than I should have to make this thing work the way I want it too.
How can I alter my registry to make this reload on bootup?
Smartskey Quirk
For an otherwise outstanding product, you would think they could find a way to make the program memory resident (in other words, not have to be reset every time you do a soft reset). And no, I don't feel like spending more money for memmaid, I already bought more software than I should have to make this thing work the way I want it too.
How can I alter my registry to make this reload on bootup?
smartskeys link is dead
hi. i"ve been trying to download smartskeys forever and it keeps giving me the "404 Not Found
The requested URL /wp-content/uploads/2006/02/smartskey0.4.zip was not found on this server."
incase it matters, I registered with xda and I'm signed in when i hit the download link. any suggestions?
thanks, adam

Diamond new users question/answer guide

to begin with, i want to tell you all how glad i am to have found and be a part of this community which taught and showed me a lot of things on how to configure and set up a decent working version of Windows Mobile. this is my first winmob phone, after having a dozen java/symbian/s60 operated phones.
i chose the HTC over the iPhone mainly because of the huge possibilities of tweaking, but for an inexperienced (WinMobile) user like me, to kick it off in the right way might prove to be harder than at first expected. so i decided to create this topic not only to ask for your help but hopefully to lay down some basic guidelines for all users new to this forum and to WinMob.
-----------------------------------------------------------------------------
my ROM version is 1.37.401.3 and my Radio version is 1.00.25.03 - that's how i bought it from store.
1. i installed the advanced confing utility but some options there don't work for me (e.g. Show SIM contacts - disable[doesn't work] or X button - close app [same]). why is that ?
2. is it in anyway possible to modify my start menu app list cause it laggs for about 2-3 seconds before opening the huge list i have there
3. what does the Radio version mean ? from what i've read on these forums, i'm thinking it has to do more than with the basic radio app, right ? what exactly does the higher version (.05) improve ?
4. the ROM version - correct me if i'm wrong .. are there official ROM versions from HTC that can be downloaded from their site that work regardless of the tweakings done to the phone? and how are user made ROMs better ? is there anything consistently better than my current version in terms of battery life and performance ?
5. i've read the manual and it says that the win media player supports .avi files yet mine doesn't open one. anything special i need to know of ?
6. what programs can i install apart from those i've found here? say yahoo messenger, if i don't want to use win messenger. and if that's possible, are there appz especially made for winmobile cause i doubt it that an ordinary PC .exe will work the same
7. is there any way to use the camera from the front of the phone for photos?
8. is there no other possibility of turning the phone ON from sleep mode other than the power button ? if not, where's the timer that sets how many seconds pass before entering sleep mode?
9. if i got it right, tomtom7 is a gps navigation program, right? does it work stand-alone? i mean, no external receiver? and does it connect to the internet while in usage ? what about google maps?
10. any other useful programs to recommend other than the ones found within this section of the forum ? i've read about users using Total Comander.. where can i find that ? or is it the normal PC program ?
--------------------------------------------------------------------------
i know these are a lot of questions but honestly these were the first things that popped in my mind after using this phone for nearly 5 days now i'll be grateful for whatever answers, advice and solutions you'll be kind enough to provide.
8. Take out the stylus - wakes it up. Just got mine today and found this out by accident. After all - why read the manual??
9. TomTom 6 is the version I bought for my Trinity, and it works just fine on my Diamond. I just chose Com Port 4 for 'other bluetooth receiver' and it works without the need for an external bluetooth GPS receiver. Curiously it turns bluetooth on while TT is running - then turns it off when stopping TT. Does it really need to connect to itself via bluetooth? Any readers got an idea?
domnu' iliescu,
a. go to:
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
and learn a few basics and in special a few therms some "slang"
b. go to:
http://modmydiamond.info/index.php and learn how to hardspl and flash a new ROM.
the "cooked" ROMs are by far better than the original one (the one u have for example). is like buying a car and using a kit to tune it, make it the way you like it. you tweak the motor and you''l get less consumption (more memory and longer battery life), more speed (faster and smoother diamond) and so on. escuse my car analogy but the thing i love even more than my diamond is my car (i wonder, is it really in this order?).
now, my answers to yr question. i might be wrong on some of the answers but there are enough ppl here hapy to correct me..lol
1. there is a high probability that flashing a new ROM will change that (see a.)
2. for sure flashing will solve it.
3. in simple words, the radio is the function that allows you to make calls, use bluetooth or yr gps. connectivity. see my a. for more info.
4. see the beginning of my replay namely, point b.
5. don't know why, again maybe a new ROM will solve this (strange ..)
6. live it to later. there is somewhere here a post regarding applications and programs supported by diamond. first flash new ROM and new radio, get familiar with the device and forget about applications. there are a few "must have" but again, l a t e r .
7. the camera is for video calls. why do u need to used when u have a better (much better) one dedicated to taking pictures?
8. pull out the stylus is my favorite.
regarding "the timer":
- go to settings/system/power/backlight for adjusting the backlight and go to settings/system/power/advanced for what u call "sleep mode". btw, it is in diamond's manual!
9. the diamond has an internal GPS. no need for external (see yr manual again). you can choose between lots of navigation programs. tomtom, igo8 and google maps (never used google maps, maybe somebody else is going to help you). i am using igo8.
10. total commander is somewhere as a cab file in the thread of one of the many ROMs here. i'll look for it or i'll upload mine somewhere.
important!!
read diamond's manual, keep reading in the forum, ask only after you are certain that the answer is not somewhere here (use search function) and read again some more! "invatzatzi! invatzatzi! invatzatzi!
good luck! Noroc!
On point 8, has anyone managed to wake the phone up/bring the screen light back on without pressing the power button or removing the stylus? Pushing the central button or even the home button would be better.
iliescu902 said:
1. i installed the advanced confing utility but some options there don't work for me (e.g. Show SIM contacts - disable[doesn't work] or X button - close app [same]). why is that ?
You should install diamond tweak, you'll find it on the forum, for easyier twaeking, it got 40 tweaks incl, and you can easy just disable or enable there.
if you hide sim contacs, it will be reset to show again after a soft reset i think.
4. the ROM version - correct me if i'm wrong .. are there official ROM versions from HTC that can be downloaded from their site that work regardless of the tweakings done to the phone? and how are user made ROMs better ? is there anything consistently better than my current version in terms of battery life and performance ?
Yes there is a new rom out, 1.93, you can download it from htc.com, htc e club, register there, and then register your product when you are logged on, and you should be able to install it.
5. i've read the manual and it says that the win media player supports .avi files yet mine doesn't open one. anything special i need to know of ?
Install TCPMP/core player, .avi, .mpeg etc. works there, best player for movies imo.
7. is there any way to use the camera from the front of the phone for photos?
Yes there is, when you use camera, go on settings and press the icon with 2 cameras on, and it will switch to the camera on the front
10. any other useful programs to recommend other than the ones found within this section of the forum ? i've read about users using Total Comander.. where can i find that ? or is it the normal PC program ?
NoData, tcpmp, S2P(music player), diamond TF3D config, diamond tweaks is some of those i find very good to have.
Click to expand...
Click to collapse
Hope it helps

i00 ROM (GPS+Phone+Mic+MMS) Updated 9/3/2009

Ok just cooked this up over the weekend .. still needs a little tweaking and testing - is the first ROM that I have released - I think it is kinda clean
Feedback is much appriciated (as always) ... and let me know if you find any bugs
BTW I read somewhere that it is possible to increase SnapVue's RAM to 64 MBs - sounds like a load of * to me ... but let me know if you know how to do this as it is really SnapVue's downfall IMHO
... I will also post some screen shots when I get the chance (is kinda late here atm)
... basically these are the specs:
Initial Release (8/2/2009):
Free RAM after hard reset: ~15MBs
Free Storage after hard reset: ~20MBs
Based on thaihugo's kitchen ROM
New input methods:
Full QWERTY (nicer and easier to input than the built in one)
Software included:
Office Mobile
Remote Desktop
Pictures and videos
Notes
Pocket Internet Explorer
Live/Messenger
Windows Media Player
Restored Today Items
Internet Sharing
Liberated
Opera Browser (Full)
MS Voice Command (Pre setup to read email subjects)
NET Compact Framework 3.5
Network Plugin
HTC Task Manager 2
HTC GPS Tool
SIM Manager
Task Manager
USB Tool
Automatically deletes Opera cache, PIE cache Temp folder and Google Maps cache each startup
Various registry tweaks... eg:
No SMS notification
Cleartype
Phone stuff removed since there is no phone functionality ... yet
The link is attached in the text document so I can see how many ppl download it
Note: you can free up alot of space by removing MS Voice Command from the cook - and save about 4 MBs of RAM by disabling it - It is important for me to be able to 'hear' my emails come in while I am at work though so this has been put in
However the overall stability of the ROM has been sacrificed in doing so -
To disable: Start > Settings > Voice Command > Uncheck Enabled
WARNING - IF PROGRAMS CLOSE UNEXPECTEDLY: This is because your low on RAM - you can stop the Voice Commander service as stated above, or download advanced config and prevent HTC Task Manager from closing apps automatically when low on RAM
Update (10/2/2009):
Free RAM after hard reset: ~16 MBs
Free Storage after hard reset: ~22.5 MBs (and 27.95 total user area)
Ripped out more from the stock ROM to free up some more space (bluetooth functionality etc since the snap view side can not see bluetooth anyway etc.)
Increased ROM stability and freed up some more ram by removing unnecessary services.
New registry tweaks:
Changed default area code to nothing
Added email and and txt msg sound notifications
Update (18/2/2009):
Free RAM after hard reset: ~19.58 MBs
Free Storage after hard reset: ~28.84 MBs (and 32.32 total user area)
Changes:
Ripped out even more from the ROM
REMOVED OPERA (download it from one of the other threads if you want it back - I use the Windows side for surfing the net)
Changed splash screen
Added i00 Reg Edit 0.99 B (my own registry editor made especially for my ROM - will be released soon in a separate thread)
Update (2/3/2009):
Free RAM after hard reset: ~16.78 MBs
Free Storage after hard reset: ~27.53 MBs (and 30.82 total user area)
Changes:
Comm Manager now works
Phone and Mic functionality now works
Added New Radio and SPL to the Flash so that n00be's don't brick their device
Screen rotation setting removed as it was buggy
Replaced Soft Reset with custom one so that the user is now prompted to confirm that they want to restart
Updated HTC GPS Tool
Help in start menu is now not empty
GPS Router Added
Internet Sharing moved to System folder
Media player removed
WM6 (NOT HTC) Task Manager Removed
Update (3/3/2009):
Free RAM after hard reset: ~17.25 MBs
Free Storage after hard reset: ~27.73 MBs (and 31.07 total user area)
Changes:
Voice Command now announces incoming calls by default
Remote Desktop put back in
IE defaults to high resolution
Speakerphone cannot be disabled on the phone now (there is no built in speaker so you could not hear the other caller when the speakerphone was disabled)
Ripped some unnecessary stuff from various places
Update 20090307 (7/3/2009):
Free RAM after hard reset: 17.09 MBs (Taken from HKCU\Performance\ after 2nd boot)
Free Storage after hard reset: 27.77 MBs (and 31.07 total user area) (Free storage taken after 2nd boot)
Changes:
.Net apps now work for apps not in the Windows directory
Update 20090309 (9/3/2009):
Free RAM after hard reset: 16.1 MBs (Taken from HKCU\Performance\ after 2nd boot)
Free Storage after hard reset: 25.83 MBs (and 29.45 total user area) (Free storage taken after 2nd boot)
Changes:
MMS intergrated into ROM
Known issues:
MMS recording voice note does not work
I now accept donations so please donate a beer if you like this ROM .
In the purpose section tell me that it's for i00 ROM and if you want me to list you below and if you want your donation amount to be shown.
Donations: (As of 22/5/2009)
$15 markus1983
Total $150 (6)
Current downloads: 1429 + text document download count (uploaded new text document and it cleared the count!)
OK here a few screen shots as promised
Common Questions
OK thought I'd put together a list of common questions that people have with this ROM to stop me answering the same questions again and again.
Q: What else is included in the Flash
A: Besides the OS the ROM includes Hard SPL and Radio 1.27.35.28
Q: Can I run this ROM on
A: Besides the OS the ROM includes Hard SPL and Radio 1.27.35.28
Q: How do I install this ROM?
A: Well if you have used custom ROMs in the Past you can just download and run the EXE - else you will have to "Liberate" your shift - connect it to your Vista side with USB Tools and then run the EXE
Q: How do I disable T9
A: Open the input options for the Full QWERTY Keyboard - Click T9 Settings then un-check all the checkboxes
Q: The WM side turns off and will not come back on
A: If this happens to you go to ( on the WM side) Settings > Connections > USB to PC application and tick "Enable Advanced Network Functionality" (thanks nbos04)
A2: You can also disable (Under Settings>Power>Advanced) the option to turn off the device when it is not used for X.
Q: Programs keep closing unexpectedly
A: You may be low on RAM - if this is the case you may want to kill the Voice Command Service, as this takes up to 4MBs of RAM constantly
Q: How can I change the Keyboard Language?
A: The registry setting for the keyboard layout is as follows HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CurLang; The complete list of values to enter can be found here; however not all are fully compatible with the Windows Mobile platform; also changing these key mappings will not change the large on screen keyboard - to change the on screen one you will need to either edit the eT9.Raphael.0409.kmap.txt file (advanced but allows for custom layouts); or download another layout from here.
I will consider including the additional on screen keyboard languages in future releases.
Q: How do I set the data connection on the W/M side to auto - disconnect as it drains the battery too quickly?
A: The registry setting for the to auto disconnect the data connection is at HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings. In there you have the setting CacheTime this is the number of seconds that will elapse before auto disconnection the data connection when not in use; change this as appropriate. You will also need to turn on the auto disconnection by editing the SuspendResume to read: GPRS_bye_if_device_off
(Note: if the auto disconnection still does not work make sure that you are not constantly connected to data - ie. Exchange server set to receive items as they arrive)
*Reserved 3*
Congrats on your rom. Looks heavy.
There is no way to get 64 mb of ram as this is the current chipset capacity, without OS loaded.
44Mb is my maximum storage available (with a functionning system of course)
I'm waiting for the new base with phone to work from there.
thaihugo said:
Congrats on your rom. Looks heavy.
There is no way to get 64 mb of ram as this is the current chipset capacity, without OS loaded.
44Mb is my maximum storage available (with a functionning system of course)
I'm waiting for the new base with phone to work from there.
Click to expand...
Click to collapse
Yea like I said it sounded like a load of * -ahh well - plan to re-release this ROM when the phone is hacked too!
I love this sort of ROM - stuffed full of goodies. It's like a Christmas treat.
I've installed the ROM just now and it's exactly how I would want the WM side to be. Thanks for setting up Opera for us layabouts that can't be bothered to
I have syncd the ROM with my huge Outlook file and it works great.
Will give you more feedback as I play.
Latest:
I'm very happy with Opera.
Haven't worked out how to disable T9 yet to set up email etc.
I can't install youtubeplay I'm getting an error. Anyone know how to get it working on this ROM?
Very Latest: I found the option to disable T9 under the keyboard options. I love the new large on-screen keypad!
I prefer the fancy calculator of Gullum's ROM IMHO.
Flanimal said:
I love this sort of ROM - stuffed full of goodies. It's like a Christmas treat.
I've installed the ROM just now and it's exactly how I would want the WM side to be. Thanks for setting up Opera for us layabouts that can't be bothered to
I have syncd the ROM with my huge Outlook file and it works great.
Will give you more feedback as I play.
Latest:
I'm very happy with Opera.
Haven't worked out how to disable T9 yet to set up email etc.
I can't install youtubeplay I'm getting an error. Anyone know how to get it working on this ROM?
Very Latest: I found the option to disable T9 under the keyboard options. I love the new large on-screen keypad!
I prefer the fancy calculator of Gullum's ROM IMHO.
Click to expand...
Click to collapse
I will install the calc skin from my touch pro and see how that runs - also will rip some more "unnecessary" stuff out such as bluetooth since it doesn't work anyway and will hopefully free up some memory too
As for you tube you could download the diamond/touch pro version here:
http://forum.xda-developers.com/showthread.php?t=395338
don't know if it works but judging by my touch pro the interface only works in Portrait (it may still work but will load in portrait)
as for the calc skin i have attached it to this post with a screen shot
will also post a newer version of my ROM, later tonight, that has ~22.5 MBs of free space (and 27.95 total user area) after boot and ~16 MBs of free ram ... seems to be more stable also
may embed the calc skin into later builds ... but it's a little big for my tastes for something i don't use
Thanks i00.
I agree that the default calculator is best now that I have seen the memory requirements of the fancy calculator skin.
Thanks for the youtubeplayer link. I haven't tried it yet but will do so this evening.
I'm having a bizzare problem setting up my email accounts for some reason. It is tricky entering my username and password, and when I try to auto detect the account configuration it says it cannot connect. When I go BACK, the password field contains more characters than I originally entered. I haven't tried manually setting up the full account yet, but this behaviour I haven't seen before.
I haven't worked out how to get the voice control goodies working yet but I'll enjoying tryin all of that out this week. I wouldn't miss voice control at all on your next ROM release however.
Edited:
Comm Manager under SnapVue Settings seems to run without displaying anything. I hope that can be fixed...
Looking forward to your next ROM release. Hope it is soon... your's is the best ROM yet IMHO.
Thanks again.
Updated.
Have been using the new ROM and am happy to report that it is notably more responsive and faster.
I was delighted to find screen orientation option for portrait under settings, so thanks for that. Although I did manage lose the start menu at some point so I was stuck on the Snapvue page and was forced to reboot from Vista. I'll let you know the details if I repeat it.
The modem is totally stable, which is great. I didn't manage to work out how to install youtubeplay but it's no showstopper, I'm very please with the ROM. I installed fexploreext which is small but infinitely useful.
Ta.
Will try to post a new release before Wed next week ... any suggestions for the new release? - I am considering taking out Opera Full and loading Opera mini instead as it requires less RAM.
Am also making a registry editor that I plan to include in the next release.
Let me know if you (anyone) has any requests.
Kris
hmmmm, any chance to have some kind of manila 2D on it?
erezj said:
hmmmm, any chance to have some kind of manila 2D on it?
Click to expand...
Click to collapse
hrm dont think that M2D works to well in landscape ... if i am wrong let me know
Kris
hey kris, you could be right.
how about that pointUI thingy from the dev forum? can it work?
i want to have somthing else for a change then the snapveiw/htc home .... hellp me ;-)
Hi everyone,
I'd really like to test this ROM but each time I launch le Custom RUU with this ROM, it ends uo with an "ERROR [262] : UPDATE ERROR"
Is there a special thing to do to use this ROM ?
snorlax said:
Hi everyone,
I'd really like to test this ROM but each time I launch le Custom RUU with this ROM, it ends uo with an "ERROR [262] : UPDATE ERROR"
Is there a special thing to do to use this ROM ?
Click to expand...
Click to collapse
Have you installed a custom rom onto your device before?
You need to Hard SPL on it prior to trying to flash this ROM
The error codes are listed here:
http://www.4winmobile.com/forums/windows-mobile-faq/13329-ruu-errors.html
This page states
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
I would try again and if that doesn't work
Download another RUU
I think that's my problem : I've only liberated the ROM shipped with my Shift.
I found the thread with Hard SPL... I've install it... Now's the ROM turn !
Thanks for the help !
snorlax said:
I think that's my problem : I've only liberated the ROM shipped with my Shift.
I found the thread with Hard SPL... I've install it... Now's the ROM turn !
Thanks for the help !
Click to expand...
Click to collapse
So did the ROM flash since u Hard SPLed? - and let me know what u think.
Also nice dog btw
going to try it
I have tried thai hugos and gullims and been disappointed with various things so i'm goign to try yours. I was intending to try to install my tiny kensington mouse which is bluetooth and worked with my advantage but if you've ripped BT out I can't is there a way to put it back in?
Thw worst thing i found about the other rom's is the fact stoopid usb tool never stays connected, anyone else have that issue?
edit: found some stuff about usb tool issues on the forum and trying those.
i00 said:
So did the ROM flash since u Hard SPLed? - and let me know what u think.
Click to expand...
Click to collapse
Yes, the "flashing process" worked perfectly... but I was a bit disappointed with the fact that the ActiveSync process was unable to complete the update of my 325 contacts : it always failed after 116 contacs updated...
So I tried a french ROM (the "French light GPS" one) and it worked...
Maybe a language issue...
If you want me to go back to your ROM and work together to sort this out, I'd be pleased to help...
i00 said:
Also nice dog btw
Click to expand...
Click to collapse
Thank's... it's my real dog...when she was young of course !

Categories

Resources