Install Andrioid sdk
(I renamed the Android folder sdk to simplify things)
Install ADB
(see Karolis post... thanks)
Now I have make some corrections to the standard install and this has worked flawlessly for me.
1. Unzip "Root.zip". Place "ota.zip" & "update.zip" into Android SDK.
(You wont need loop)
2. I started with the 2gig sd provided, formatted it in windows and copied attn1's ROM to it (leave it zipped).
3. Then I downloaded Clockwork_Aria_MT3GS.zip and placed that and a copy of the above ROM in the android sdk/tools folder.
4. Open terminal in Ubuntu and type cd /sdk/tools and hit enter
5. Heres where the differences start. Plug the phone in to you pc powered on WITHOUT the sd card in it. When the phone asks select charge only.
6. In the terminal type sudo ./adb devices and hit enter
(your device should show up)
7. In terminal type sudo ./adb reboot bootloader and hit enter
8. Now the phone should have rebooted showing the white screen. Select BOOTLOADER and hit the power button on the phone. Wait for the text to change to "HBOOT USB Plug. This is the tricky part use volume down on the phone to select "Recovery" but DONT hit the power button until you are ready to push the sd card in after you hit the power button.
9. You should come to the red triangle screen now. In terminal type sudo ./adb devices again and your devise should show up. If not eject the sd card switch to the terminal and type sudo ./adb reboot bootloader again.
10. If your device showed up Hit Volume up and the power button on your phone.
11. Now use volume down to select Apply sdcard:update.zip and push the power button to execute. Let that run trough, finish and go back to the screen you started at.
12. In terminal type adb push ota.zip /sdcard/update.zip and hit enter.
13. in terminal type adb push update.zip /sdcard/update.zip but do NOT press enter yet.In recovery, again scroll down with power down to select sdcard:update.zip but do not execute yet.Press the power button and then watch phone to say "verifying" and then press enter IMMEDIATELY on the keyboard. If timed right, Clockwork recovery should load. If not, start back at step push ota.zip /sdcard/update.zip and repeat from there until clockwork loads.
14. From Clockwork Recovery, do a Nandroid backup. From Clockwork Recovery, select install zip from sdcard, and execute, then choose zip from sdcard and execute, and then you can scroll down to your pre-rooted rom of choice and execute that to flash it. In Clockwork you can scroll with trackpad or volume buttons, and you can execute with either the power button or a trackpad button push.
Thanks to attn1. I stole alot of what you typed, your ROM and for getting this working in the first place.
Let me know if I screwed anything up. Its been a long day : )
I think that your method works well, but I find that of attn and eugene is easier to manage, since plugin a usb cable is easier than popin a sd card.
Anyway, great summary. But you don't really need step 1 if you are using attn's ROMs.
sd73ta said:
Let me know if I screwed anything up. Its been a long day : )
Click to expand...
Click to collapse
I'll edit the first part out when I get home. This worked for me because I couldn't get it to find my device the other way and this way found the device first try each time i did it. Thanks for the input
plutino99 said:
I think that your method works well, but I find that of attn and eugene is easier to manage, since plugin a usb cable is easier than popin a sd card.
Anyway, great summary. But you don't really need step 1 if you are using attn's ROMs.
Click to expand...
Click to collapse
if you dont mind Im still kinda new to this which step should I take out?
After hours of failing to get things to work on my Win7 machine, this saved the day. Thanks!
I was unable to success with the SD card method, so I cannot really comment on which steps are unnecessary. But now the almighty unrevoked has automated the whole process and we don't need to chase the bear any longer.
sd73ta said:
if you dont mind Im still kinda new to this which step should I take out?
Click to expand...
Click to collapse
May NOT work for 2.3.3, if attempting on 2.3.3 use old part 1! - Will wipe all data though
Windows ONLY!
Hey guys, rooted my Nexus S today, and decided to write a thorough, detailed guide on how I did it, as none of the guides I had found had everything detailed. I came across a few problems, and all of this is in the guide. I successfully completed it on my Nexus S running 2.3.2, so any version below that will also work.
The original guide was made by AllGamer, and can be found here. I followed this guide, and added things when I found it was needed
The full guide with everything (including links, pictures) can be found on my site, Complete Android.
New info: Upon finding another thread over at XDA (http://forum.xda-developers.com/showthread.php?t=931865) it has been realized that you can root your Nexus S without unlocking the bootloader, and therefore not loosing your data on the SD card. Part 1 for the new method is still the same, but choose the new Part 2!
WARNING: Rooting your device will wipe all data off it, so you will loose EVERYTHING! Make sure you backup all important data first. Only applies to old Part 2 (fastboot oem unlock method), but it is still a good idea to backup important information!
Click to expand...
Click to collapse
What you will need:
Nexus S (obviously)
Android 2.3 SDK
USB Cable
PDAnet (for drivers)
Clockwork Recovery Image
Superuser
Part 1
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Once it has finished downloading, unzip it, and run the SDK manager.
Select whatever components you wish to install, but you MUST make sure you install Google USB Driver (Available packages > Third party Add-ons > Google Inc. Add-ons > Google Usb Driver package, revision 4) otherwise this guide will not work!
We must now install the Google USB Driver, or the phone will not be recognised as a device other than a mass storage device.
Connect your Nexus S to your computer, and put it in USB storage mode.
Put it in USB Debugging Mode (Settings > Applications > Development > USB Debugging)
Windows should now recognise your Nexus S when you plug it in, and ask to install drivers. It probably won’t find anything, so we need to help it manually.
(Installing drivers manually varies between Windows versions, so please refer to http://developer.android.com/sdk/win-usb.html if you are having trouble). Launch Device Manager (you can find it in Control Panel), find Other Devices, and listed under that heading, you should find Nexus S. Right click, and select Update Driver Software. Click Browse my computer for driver software, find your SDK folder, then the google-usb_driver folder inside it, click OK, then Next. This should install the USB driver successfully. Reboot your computer.
Power off your Nexus S, connect it to your computer via USB cable, and boot it into the Bootloader Interface (you can do so by holding down the Power and Volume Up buttons at the same time).
It should say LOCK STATE – LOCKED, in white just above the green Android. You are now ready to move on!
Part 2 - Fastboot oem unlock method - WIPES ALL DATA!
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use ‘fastboot oem unlock’ (the rooting command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn’t).
Now in the command prompt, type in (without the quotes) ‘fastboot oem unlock’.
Now turn your attention to the phone, and read through the new information displayed on the screen. Using the Volume keys select Yes, then press the Power button. This will WIPE EVERYTHING! I bear no responsibility for any lost data on your phone!
If everything is successful, on your phone, the LOCK STATE should now read UNLOCKED, and on your computer, the command prompt window should say something like this:
Download the Clockwork Recovery image (here if you don’t already have it) to your Android SDK tools folder (*Android SDK*\tools).
Rename the newly downloaded Clockwork Recovery image to ‘recovery.img’ (no quotes).
Now we need to flash it to our Nexus S, so enter this command into the Command Prompt (make sure it is in the Androis SDK tools folder!) ‘fastboot flash recovery recovery.img’ (without the quotes).
If all is successful, the Command Prompt window should look something like this now:
Download the superuser app to the Android SDK tools folder.
Power on your Nexus S, leaving it connected to USB.
Mount the USB storage, and drag and drop the superuser .zip file you just downloaded into the root of the internal SD card (so Computer > *Device Name*, not in any other folders!). It should look something like this:
Power off the Nexus S, and return to the Bootloader Interface (step 9, part 1).
Select Recovery using the Volume buttons, then the Power button.
The phone should reboot into Clockwork Recovery, but if not don’t panic, just repeat steps 9-12, including downloading a new copy of the file (mine only worked the second time around, don’t worry!)
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot. (You will now also have an unlocked padlock when you boot up)
Done! You now have to set up your phone again like when you first got it, but it will be rooted now.
New Part 2 - Does NOT wipe everything - Keeps a locked bootloader
Make sure Part 1 is completed.
Make sure you have downloaded the Clockwork Recovery file and the Superuser file.
Move the Clockwork Recovery file to your tools folder within the Android SDK folder, and rename it to recovery.img (for simplicity).
Connect your Nexus S via USB to your computer and mount it as USB storage. Copy across the Superuser file to the top level of your sdcard. (So the first window you see, not in any other folders. The sdcard is just where all the files are stored, don't worry about it too much for now).
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don't worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use 'fastboot boot' (the boot image command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) 'cd c:\*YOUR SDK*\tools'.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn't).
We now need to use the 'fastboot boot' command to load Clockwork Recovery onto our Nexus S. In the command prompt, type in the following (but without the quotes, as always) 'fastboot boot recovery.img'
Once you are in Clockwork Recovery (it may take a couple of tries, don't panic, just redownload Clockwork Recovery, and complete steps 3 and 10, part 2) it should look something like this:
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot.
Done! You should still have all your data present on your phone, and have root access!
Notes
As AllGamer said in his tutorial:
It’s normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you’ll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you’ll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Keep this in mind! It's not because you did something wrong
Also, some root apps require BusyBox to be installed, as I found out with Titanium Backup, so once you set up your Nexus S again, head on into the Market, and download BusyBox. It installed fine on my Nexus S this way, and now TB works fine.
I hope this is the best, most thorough guide you will find on rooting the Nexus S. Enjoy! Feedback is appreciated, and I will help out if you need any extra help.
Your guide has been wonderful however I'm stuck on part 2, step 4. I tried writing in the path to my directory and they keep giving me whatever I wrote in the command prompt "is not recognized as an internal or external command, operable program or batch file"
"Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’."
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
STARSCR33M said:
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Click to expand...
Click to collapse
Ok so if you want to change directories in the command prompt, you need to use the command
Code:
cd
So in your case I would type in
Code:
cd c:\Users\Du\Downloads\android-sdk_r09-windows\android-sdk-windows\tools
That way is fool proof, however you could take a shortcut, because you are already in the Users/Du folder (because of how it looks when you first open it), you could just type in
Code:
cd Downloads\android-sdk_r09-windows\android-sdk-windows\tools
Hope that helps
ravidavi said:
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Click to expand...
Click to collapse
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
EDIT: New approach added, now there is choice and easyness for all
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
Click to expand...
Click to collapse
Thanks
Jonathon Grigg said:
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
Thanks
Click to expand...
Click to collapse
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step. Once you're in clockwork you pretty much own the phone. I'll be interested to see if someone can use clockwork to flash a new boot image once rooted without the unlock; if so I can't see any reason to unlock the bootloader. That said, mine is unlocked, and I like it that way, but many won't root for fear of losing data on the phone.
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it. I guess that's there own fault for not doing enough searching on their own...
Anyways, nice and thorough effort. I'm sure many will benefit from your additions to AllGamer's tutorial.
distortedloop said:
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step.
Click to expand...
Click to collapse
I have been wondering that myself. My guess is that for the average user you don't need to, but maybe it's for real power users who build their own ROM which has been fully modded or something, I'm not sure.
but many won't root for fear of losing data on the phone.
Click to expand...
Click to collapse
I definitely agree with that, and your guide is probably the best way for those people!
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
Click to expand...
Click to collapse
Exactly, this is one of the better uses for both methods. I already had to wipe my phone twice due to Samsung CS so I'm used to it Although it does give you a chance to clear out the apps you don't need. Doing that I noticed better battery life on my phone.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it.
Click to expand...
Click to collapse
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Thanks distortedloop
This is awesome cause i relocked my bootloader i really just needed root. Thanks!
Edit oops lost track of tabs open.
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Jonathon Grigg said:
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Click to expand...
Click to collapse
Nicely done. Thanks.
sam4free said:
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Click to expand...
Click to collapse
That's what I suggesting a couple of posts above (root without unlock to at least make a backup of user data).
Restoring a titanium backup would not re-lock the phone. A nandroid restore might, depends on what all it imaged and restores, but it's so easy to re-root, that doesn't seem like a big deal.
Jonathon Grigg said:
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Click to expand...
Click to collapse
Looks like you forgot to add the link in your copy pasta.
AtomicPC said:
Looks like you forgot to add the link in your copy pasta.
Click to expand...
Click to collapse
I've been working on it I just wanted to get it up here as soon as I could That's why I mentioned that the full guide is available on my website. I'm going back to school today, so I don't really have too much time for changing links now. Besides, most people on XDA should know how to look at the 'What's needed' part
Sent from my Nexus S using XDA App
Jonathon,
Thank you for posting this detailed guide to rooting without losing your data! I do have a question. As you've probably heard, there are a few updates coming soon and if they are like they were on the N1, they always broke root. So getting root back was tricky unless I "unrooted" before applying the update. Using your method, is it easy to "unroot"? Thanks!
No problems
As for your problem, I never actually had a N1 so I don't exactly know why that would happen. So far from the 2 updates available to NS owners it seems like the OTA update does break root but it appears to be the same to get it back again. Can someone confirm this? I haven't been through an update with my root yet.
As for unrooting, if you haven't unlocked the bootloader (so you have followed the new part 2) I think it is just a case of finding a stock image (I think there's a GRH78 one around here somewhere) and booting into Clockwork Recovery and flashing it. That should remove root and then also give you a notice to install the GRH78C OTA update so you get the latest version.
I think that is what you meant? If you did unlock the bootloader (using the original part 2) then I think you just have to follow the same steps as I mentioned just then but afterwards go back into the bootloader interface and run 'fastboot oem lock' and it should be right.
Sent from my Nexus S using XDA App
Question on Part 2- step 1.
Code:
# We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
hmanxx said:
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
Click to expand...
Click to collapse
When I tried to use the fastboot command with my Nexus S connected, it would hang and not do anything, despite leaving it for about 5 minutes. I searched online, and found the PDAnet solution, so I don't know what the difference is exactly. All I found the Google SDK USB drivers to do is enable you to see your device in Device Manager, however you could try it without the PDAnet drivers, and let me know what happens!
Thanks
Thanks for the prompt reply.. I tried out the google driver..it doesnt work under fastboot. I eventually get the fastboot enabled driver..that could explain why the pdanet driver required.
After i installed the fastboot enabled driver, i could test the connectivity under fastboot with "fastboot devices"
thanks going to try out rooting..i just want simple root access..without wiping data is a ++ ..
I managed to run fastboot boot recovery.img...going into clockwork menu..apply the superuser.zip.(for froyo version)..till completion..no word of failure..
However after rebooting, su and SuperUser.apk are not installed.( I used adb to check the system/app and system/bin folder.
Edit- manage to root properly after system mounting .
Just a note..to properly complete the rooting, one need to apply mounting then mount system before applying the Superuser.zip install from sdcard.
Prior to step 11, you may want to add the following steps for folks having problem to get the superuser.zip to install properly.
Originally Posted by droidmage
So all you guys who are having trouble getting root inside the rom, When your in recovery before you flash the superuser.zip file select -- mounts and storage -- then --mount /system -- then flash the .zip file and reboot
Click to expand...
Click to collapse
Thanks for the extra bit of info, I will attempt to add that in when I get a bit more time on my hands. when I did it it seemed to work fine so thanks for discovering that!
Enjoy your rooted phone
Sent from my Nexus S using XDA App
hi, this is how i managed to get root working on my tab, everything went fine for me till it came to booting into recovery then nothing use to happen so i combined two separate guides to get it working. thanks (bcmobile and 411tecknology)
the command in "(getting root 5) )" worked for me as i was getting stuck with "fastboot flash recovery skitzandroid-recovery.img"
i unlocked the bootloader by firmware upgrade the the following
for all those people like me with no experience in dos commands or linux, hope this works for you
PREPARE:
1) With your Tab in fastboot mode (step 1 of “GETTING ROOT” below), make sure you have a working fastboot implementation:
working dir\\fastboot devices
If all is well, you should see your device serial number. If there is a problem, you won’t get any response.
2) Downlad the two files attached to this thread
3) create a folder in drive c naming it "root"
This will be referred to as the working directory throughout the rest of this guide
4) Copy skitzandroid-10-1v-root.zip to your working directory (DO NOT UNZIP!) c: root
5) Extract the skitzandroid-recovery.img file from skitzandroid-stock-recovery.zip to your working folder. Your working folder( c: root) should now have 1 IMG file and one ZIP file.
6) copy fastboot files to the the folder that you are going to use as working dir ( c:root)
7) Copy the skitzandroid-10-1v-root.zip file to the root of your sdcard. You can eithe drag/drop, or run:
working dir or c:\root>adb push skitzandroid-10-1v-root.zip /sdcard
GETTING ROOT:
1) Power off your Tab and power it back on, while holding the VOLUME DOWN button.
2) When the DOWNLOAD / FASTBOOT icons appear, press VOLUME DOWN again to select FASTBOOT icon (the one with the USB logo) and press VOLUME UP to confirm selection.
3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
4) Open a terminal / CMD prompt and CD to your working folder
keep doing cd.. until you get to "c:>" then
cd/root
5) Run the following command:
c:\root> fastboot boot skitzandroid-recovery.img
..and wait. It might not look like anything is happening but it is.
6) You should now have a recovery menu. Use the volume rocker (up/down navigates menu options)
to select “Install zip from SDCARD” (or something like that)
7) Navigate to the root of your internal storage (/sdcard), select the skitzandroid-10-1v-root.zip file and press (tap!) the POWER button to confirm selection.
Once complete, use the Volume rocker to select “REBOOT” from the menu and press (tap!!!) the POWER button to confirm selection.
9) YOUR’RE DONE. Press the thanks button on this thread to continue
TESTING:
Check your apps menu to confirm the existence of SuperUser app.
whats wrong with this?
http://forum.xda-developers.com/showthread.php?t=1079781
Nothing!
I used it on UNLOCKED 10.1v (not from Vodafone) and had no data loss!
Great, Thanks
Frank
I do not understand: 3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
Where do I enter this data?
I mean - fastboot deviсes
TNTCOSMOS said:
I do not understand: 3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
Where do I enter this data?
I mean - fastboot deviсes
Click to expand...
Click to collapse
once you start your device in fastboot mode and connect it with the computer to make sure your device is recognized by the computer you open command prompt take it to your working dir.. (ie. c:>root) in our case type fastboot devices and hit enter, if your computer recognized your device you will the serial number under it.
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
TNTCOSMOS said:
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
Click to expand...
Click to collapse
assuming you have installed sdk if not please do so, then staying in sdk go to
(C:\android\android-sdk-windows\platform-tools ) by clicking your mouse in desktop
(not cmd prompt). above eg.. is how i installed sdk on my desktop yours may be different, now in platform-tools you will see two files called fastboot copy them both to to your folder called ..root.. and you are set to go.
bottom line is if you want to start fastboot from any folder in cmd you have to have these two files in the folder.
also if you know that your device is detected by your computer dont worry about step 3. all it does is tell you that your device is connected.
I have all turned out, the problem was the drivers. I copied the driver from pdanet and it worked!
TNTCOSMOS said:
I have all turned out, the problem was the drivers. I copied the driver from pdanet and it worked!
Click to expand...
Click to collapse
Glad to hear that you finally got the root.
same problem
TNTCOSMOS said:
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
Click to expand...
Click to collapse
i've tried with pdanet too but it's not working....like the computer can't see the device...any ideea ???
and when i write "fastboot boot ......etc......" it says <waiting for the device>
please help
You need the drivers installed for fastboot, have you installed them? Please have a look at the [Guide] Unlock your bootloader thread. it contains all the details to get fastboot working.
thank you...finally did it
another noob question...how do i enter in cwm for installing another ROM ???
zbuggy said:
thank you...finally did it
another noob question...how do i enter in cwm for installing another ROM ???
Click to expand...
Click to collapse
The easiest way if you are rooted is to install rom manager from the market. It has an option to reboot to recovery if you have CWM installed. It also allows you to update to the latest CWM recovery if there is one.
i've tried putting the TB Galaxy 1.0.9: Honeycomb 3.1 + TouchWiz UX and i made a mistake... in cwm i've uploaded the zip file only with the update and not the rom itself.since then the tab won't start...it stop's in the beggining at the "samsung galaxy tab 10.1v"...any ideea...what can i do ?
Download latest rom and instructions from samfirmware.com using odin Get ur tab into fastboot mode with 3 button recovery and start from scratch.
It should work out
Sent from my GT-P7500 using Tapatalk
zbuggy said:
i've tried putting the TB Galaxy 1.0.9: Honeycomb 3.1 + TouchWiz UX and i made a mistake... in cwm i've uploaded the zip file only with the update and not the rom itself.since then the tab won't start...it stop's in the beggining at the "samsung galaxy tab 10.1v"...any ideea...what can i do ?
Click to expand...
Click to collapse
Do the following. If you have not yet odin.
Download the full rom.
Follow instructions in how to get into fasboot in sticky thread.
Once in fastboot you can load recovery via it, to do that download the recovery from droidbasement.com/blog, search on pershoot's website for recovery 4.0.4 if i remember correctly then type
fastboot boot recovery.img
where recovery.img is the name of the file you downloaded from droidbasement.com
Recovery will then load give it a minute or so.
Once loaded you can push the downloaded full rom via adb. That is part of the android sdk.
Like this: adb push romfile.zip /data/media/ (this will take a few minutes)
Then in cwm instal rom.
I hope it helps. Btw, remember you need to flash the wipe script of the rom before you install the rom if you are comming from stock.
Send from my GT-P7100
10x everybody it worked!!!!!!!!
Still me, posting in yet another thread. Still can't get the proper drivers. Pda method is not working. Which version of PDanet should I use ? The latest ? This is ****ing irritating...
I'm used to have to struggle to get things work at the beginning, but with my Magic and Hd2 it was a matter of hours...not weeks ! I'm sure it's something stupid but everybody deserted these guides topics...
I'm actually considering posting in the Dev section just to get attention...
Also, pershoot blog's advices are a joke : with no tags, a not working search field, no categories, try to find an info ! Knowing that the word "Recovery" will pop about 3 times per subject, I'm good to spend the week-end searching...
DannyBiker said:
Still me, posting in yet another thread. Still can't get the proper drivers. Pda method is not working. Which version of PDanet should I use ? The latest ? This is ****ing irritating...
I'm used to have to struggle to get things work at the beginning, but with my Magic and Hd2 it was a matter of hours...not weeks ! I'm sure it's something stupid but everybody deserted these guides topics...
I'm actually considering posting in the Dev section just to get attention...
Also, pershoot blog's advices are a joke : with no tags, a not working search field, no categories, try to find an info ! Knowing that the word "Recovery" will pop about 3 times per subject, I'm good to spend the week-end searching...
Click to expand...
Click to collapse
Hello,
I have been successful with rooting on win7. With win xp - after a few day struggling - fastboot did not give a go. Hope this helps
I just can't get the "Adb Original" signature from Pdanet. I always get standard Adb. I add the galaxy tab lines in the .inf file but still...
Do you guys edit the inf file with Wordpad or another tool ?
Note: this will void your warrenty, and also I will not be responsible for the bricked devices, so proceed with caution,
Read all the instructions carefully, before proceeding, and check if this methods suites you...
Also remeber if you are going to hit thanks for me one time you should thank these guys 100 times, their methods were the ones which helped me post this.
Derjan23
esag21
fire3D
As all of you know this phone was condemned due to its lack of a proper method to unlock the bootloader, so many of the guys banned this phone, I never knew before I switched into it from a Lumia 820 in a refurbished market, when I ealized this phone was not easily breakable I was so worried and cursed much for the seller to cheating me. Also I knew I was going for a cheap buy and I realized I was a fool... but not for long. Enough chit chat.... let's go in deep
*the proper and extremely unofficial method of performing the tasks mentioned in the title..... for ESA-XXX
This method is different than usual way, it can be summerized into;
1. Root your device, and install any CWM version
2. Unlock the bootloader
3. Install the required version of CWM
4. Install any ROM via CWM methods.
Rooting
* Important: You need to be in the firmware update of v20a check it in settings > about device > software
otherwise update to it using LG PC studio
or
this thread (here), but remember you need to do this only once, if you are thinking to do it better in next time, you will relock your bootloader, and that's it...
1. You need files from the following links(I don't have any online space so email me a request on [email protected] and i will mail back you the files) to proceed, so you better download them and copy them to C:/unlock
2. Then open a command prompt as Administrator, and type 'cd C:/unlock'
3. boot into stock recovery by turning off your device and turn it back ON while pressing volume down key. (Vol. Dwn key + power key)
4. Connect it via USB to the computer and type in the cmd;
Code:
adb sideload Superuser.zip
5. After the installation, choose 'reboot to system' from the device to turn it on. And then install an app called 'root checker' from the play store and check if your device is rooted, and if it is, say 'yeah' a bit louder
6. Now install unsecured recovery;
typing in your CMD; make sure you type one by one and hit ENTER
Code:
adb push recovery-clockwork-touch-6.0.3.1-p880.img /sdcard/
adb shell
su
cat/mnt/sdcard/recovery-clockwork-touch-6.0.3.1-p880.img >/dev/block/mmcblk0p1
sync
at this point proceed to next major move without hesitating...
Unlocking the bootloader
1. If you are in the same CMD close it and re-open as admin, and type 'cd C:/unlock' and type one by one of the following and hit ENTER;
Code:
adb shell
su
cat /sys/firmware/fuse/odm_reserved >/data/local/tmp/odm_reserved
echo 0x00000000000000000000000000000000000000000000000000000040000000c8 > /data/local/tmp/odm_reserved
echo /data/local/tmp/odm_reserved >/sys/firmware/fuse/odm_reserved
2. Boot to bootloader
close the early CMD and open a new one as admin;
type;
Code:
adb reboot bootloader
at this point you will see LG logo
the type;
Code:
fastboot oem unlock
and press volume down key and then press power key to proceed (your screen won't show you anything)
at this point you will see nothing your screen will be turn black, count to 30 seconds and remove the battery, and put it back wait to check if the phone starts automatically, if not turn it on.
After the power on connect it via USB and type in the CMD;
Code:
adb reboot bootloader
after the LG logo shown up wait to see if anither screen is shown or a black screen may be,
and then type;
Code:
fastboot getvar all
wait for 15 sec. And remove the battery, put it back and turn the device on.
Now go to the hidden menu(3845*#880#) and check bootloader unlock status. Viola... Unlocked.... Say 'Yeah' more louder than before.
Flashing latest CWM in a non harmful way to the unlock state.
Your downloaded CWM file looks as;
Code:
recovery-clockwork-touch-6.0.*.*-p880.img
* - denotes any numbers
1. copy it to C:/unlock, and open a CMD as admin and cd into unlock folder, and type; type one by one and hit ENTER.
Code:
adb push recovery-clockwork-touch-6.0.*.*-p880.img /sdcard/
adb shell
su
cat /mnt/sdcard/recovery-clockwork-touch-6.0.*.*-p880.img >/dev/block/mmcblk0p1
sync
after boot into recovery after turning your phone off and powering on with (vol. Down + power) combination. Tadaa..... you're in the latest CWM...... now give away big load 'yeah' s...... :laugh:
Now proceed with any ROM flashing, but remember use only the flashing via CWM recovery. I don't suggest any other methods....
Why another thread?
Sent from my OmniROM-powered LG Optimus 4X HD
Ans it is harder than the other methods
Sent from my LG-P880 using Tapatalk
Is it same with v20b
Sent from my LG-P880 using xda app-developers app
Is there a way to reboot this thing without root. All the apps seen need root. Why isn't it available with the power button anyway? Am I missing something?
PolishPoet said:
Is there a way to reboot this thing without root. All the apps seen need root. Why isn't it available with the power button anyway? Am I missing something?
Click to expand...
Click to collapse
Root access is needed but the only way I know how to do it without root is with a computer via usb connection; install minimal adb and fastboot by shimp 208 and run through command prompt. Make sure you have updated motorola drivers and connect your phone, run command prompt and change directory to wherever you have adb installed; type "adb reboot" (without quotes, you may include -bootloader or -recovery to go into either of those); to install, go here.
http://forum.xda-developers.com/showthread.php?t=2317790
I've just moved to this phone from my S3, and it seems I have been spoiled by CM through the years, as the first thing I noticed about the OS was all the features I frequently used -- including a "reboot" menu item, which I wouldn't have considered a "feature" until now. The best part: when I first turned the thing on, it tried over and over to activate itself but failed, with the error message telling me it would try again the next time I reboot the phone. And how would you suggest I perform that reboot? This one I'm sure is trivial to most by now who have been using this phone for a while, but it just blows my mind.
Is shrimp's adb fastboot accepted as a recommended and reasonable workaround for this?
BTW, what other "features" am I going to notice are missing soon (and any recommended apps/methods to replace them)?
Thanks.
Doesn't just holding the power button a few seconds "reboot" the phone...or is that not really a reboot?
wjdunn3 said:
Doesn't just holding the power button a few seconds "reboot" the phone...or is that not really a reboot?
Click to expand...
Click to collapse
More of a hard power-off and back on than a clean reboot, and you would lose state and cached data, which to me isn't worth the risk.