HELP - HARD-RESET and POWER button not working - Tilt, TyTN II, MDA Vario III General

Hi guys!
Yesterday my Kaiser hang and I had to do a Soft-Reset. Now, it boots into windows and immediatelly resets...I tried to make a Hard-Reset but it seems the soft buttons doesn't work, although they work fine in Windows...
After that I tried to flash a new ROM via SD card but when I press the Power Button to start the update, it does nothing, nor the Action Key to Cancel...
Do you have any idea of what it can be? I really need some help because I cant do anything with it....
Regards!

et_pedro said:
Hi guys!
Yesterday my Kaiser hang and I had to do a Soft-Reset. Now, it boots into windows and immediatelly resets...I tried to make a Hard-Reset but it seems the soft buttons doesn't work, although they work fine in Windows...
After that I tried to flash a new ROM via SD card but when I press the Power Button to start the update, it does nothing, nor the Action Key to Cancel...
Do you have any idea of what it can be? I really need some help because I cant do anything with it....
Regards!
Click to expand...
Click to collapse
I think you are not doing the hard reset properly, since you are stating that the buttons work while you are in windows. Retry and see what happens.

Yeah does sound like you need a hard reset and aren't doing it properly. 2 ways to do it listed below:
-Press and hold the Left & Right SOFT KEYs and at the same time use the stylus to press the RESET button. Release the stylus but keep pressing the SOFT KEYS until you see the Hard Reset warning screen. Release the SOFT KEYS and then press the LEFT PHONE KEY.
-A software option is also available. Start> Settings> System> Clear Storage.
Type 1234 in the box and tap YES.

Sorry for the silence guys...
I'm doing the Hard Reset OK, but the phone simply doesnt do it...
Also the Power button doesnt work when installing a new ROM with SD Card...
My phone is in a continuous soft reset :s

Related

Hard Reset Kaiser/AT&T Tile?

I did the search, but not finding anything...Thanks for the help
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
austinsnyc said:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
Click to expand...
Click to collapse
This is the information I found... bu t I HAVE NOT been able to get my Tilt to Hard Reset from pushing any combination of buttons...
But this does work...
grizzley said:
you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Ron
I know this already. I am looking for combination of bottons + reset. As press softkeys + reset for 8525...etc
grizzley said:
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Don't forget about your good friend, WIKI.
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Jim_R said:
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Click to expand...
Click to collapse
interestingly, it does not work on my TyTN II.
However, its working on the Trinity.
It worked on my Kaiser/Tytn ll. Thanks!!!
not for me :-(
Hi,
maybe me being stupid, but this procedure does not work for me. Problem is that I installed software for the iGo bluetooth keyboard (I know ...) and ever since the Kaiser is resetting itself every 30 seconds. So what I get is only the smart mobility message, a short vibrate and then back to start. Anyone any idea how to get out of that? May I just press the wrong softkeys?
many thanks in advance
eRay42
new situation: the keys I press are definitely the right ones, I can also get into bootloader mode. I flashed the original rom (RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship) back which finished successful but the situation is the same. When I hard reset I am told it has been done, being asked to press the green button and it reverts to the old problem immediately. I should say that I have not modded my device so far, it was in original state before I installed the above mentioned software. Could it be a coincidence and it is a hardware problem?
HELP!!!
I found hard-resetting my HTC TyTN "GB" somewhat unpredictable. Holding down both soft keys while depressing the reset buttone is the correct procedure. It's either related to the HTC_END.cab. Do you have this installed?
Cheers
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
pietrucci said:
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
Click to expand...
Click to collapse
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
pietrucci said:
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
Click to expand...
Click to collapse
Pencil trick worked for me tooooo
reset
thank you..my tilt went crazy and won't bot...just keep restarting and turning off.
I had to use the pen and hold down
damn it now i have to restore everything
No still not working. These button things doesnt work. BTW does using Clear Storage give same effect, anyone?
I also haven't been able to perform hard reset on my TyTN II with the Soft Keys.. it just keeps rebooting! Can anyone help me?
Cumpz
LoL.. nothing like keep trying..
Already got it..
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
icum said:
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
Click to expand...
Click to collapse
It's in the Kaiser Wiki, under 'Kaiser resets'.
this is what is says...
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
* Press and hold both soft keys
* Using a stylus, press and hold the soft reset button at the bottom of the phone
* Keep all three buttons pressed until the keypad lights turn off and then flash
* Release the soft reset button while still pressing the soft keys
* Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
* Finally, press the green call button to perform the hard reset, or press other key to cancel
1. what buttons are the soft keys..
2. i pressed the power and the camera buttons then the reset set pinhole button.. release the reset pinhole button after the keypads lights go off still nothing..

blackberry connect install problem / reboot frozen screen

I've searched the forums, and can't find a report of anything similar...so this might be new...if it isn't, help locating a thread would be great.
- Downloaded Blackberry connect install cab
- Seems to install fine (log looked good before reboot)
- Press "ok" to reboot device, but upon reboot, the device screen is locked at the Windows Mobile screen
The unit seems to be operating fine... I can receive calls - the phone rings, the caller ID pops up, but it stays on top of the Windows Mobile boot screen...
The power button will not shut the unit off...only turns the locked screen on and off
Battery removal and reboot freezes at same spot.
I had deselected all the ActiveSync options including the 'connect via USB' option... and now can't view my device from my laptop...
I've had the TILT only a couple of days...I'm running the stock ATT Tilt ROM & software...added two themes (night palms and the planet reflection ones)... have a 6G microSD card with some songs, pictures, and a device backup...
Looking forward to your suggestions & solutions!!
I tried it on mine and it did the same. So I gave up and did the hard reset and started over without even attempting to install the bb connect.
after hard reset
thanks for the quick response...
the hard reset worked fine...
I repeated the bbconnect setup, this time installing to the device instead of to my card... everything worked fine.
How did you do a hard reset on it?
hard reset
a hard reset will wipe all your data and set it everything back to the default status...it isn't supposed to clear anything on your sd card ... i take mine out anyway.
to do a hard reset, hold both the soft buttons while pressing the reset button w/ the stylus (the reset button is on the bottom edge under the hard OK button )
wprocter said:
a hard reset will wipe all your data and set it everything back to the default status...it isn't supposed to clear anything on your sd card ... i take mine out anyway.
to do a hard reset, hold both the soft buttons while pressing the reset button w/ the stylus (the reset button is on the bottom edge under the hard OK button )
Click to expand...
Click to collapse
One thing the instruction did not say rright was to hold the two soft keys and then press the reset then release and wait for the screen to give the instructions. Well the real way is to hold all 3 and wait and the process will be on its way.
wprocter said:
a hard reset will wipe all your data and set it everything back to the default status...it isn't supposed to clear anything on your sd card ... i take mine out anyway.
to do a hard reset, hold both the soft buttons while pressing the reset button w/ the stylus (the reset button is on the bottom edge under the hard OK button )
Click to expand...
Click to collapse
this is just not working for me, how long are you pressing the stylus in? how long are you holding the buttons?
When I do it I get the AT&T logo screen (a short vibrate) then it continues to the windows mobile boot screen. I can never get the prompt to erase all data. I've tried the procedure a dozen times, no luck.
Make sure you are pressing the soft buttons and not the 'call' and 'end call' buttons as stated on some sites. Hold those and press stylus into reset until it turns off. Continue holding the buttons until the message comes up.
I've just had to do this for exactly the same reason!
I had the same problem on my Touch. After the hard reset I have found a solution: install application to device memory not on storage card. That helped me and now BB Connect is working fine.

AEB button plus bricked my Tilt

AEB button plus bricked my device. It will start but when the green screen appears it will not continue. Activesync will not connect and I cannot hard reset. Please help!
You should be able to hard reset as you dont need to be in the OS to do this. Try following the hard reset procedure whilst your phone is booting up.
PROCEDURE EXTRACTED FROM WIKI:
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Hope this helps
I have ae button plus on my tilt. How in the world did it brick your tilt?
You installed it to your storage card didn't you? tsk, tsk, tsk...
It will work in storage card only if you change it's start up number in the reg. Otherwise it's stuck trying to load a program from a place it can't see yet. Because the startup directory tells it to boot before your SD card loads. It's not bricked though. You can hard reset you just have to know how.
Firstly do a soft reset. Immediately after the reset depress both softkeys. As soon as the green screen comes up depress the reset button again while still holding the soft keys. Then follow the directions on the screen! Voila!
Thanks guys, I did not install to my card. During installation it read some type of "language" error. Eventually I did get it to hard reset. I hooked it up to my comp and then tried a hard reset, after about 10 tries it worked. Thank you for your help...

HELP... Tilt won't hard reset.

I press the power button and camera button while pressing the soft reset button. all I get is a 3 color bar screen that says serial. That's it...
Then I tried to use the clear storage app. I typed in 1234 and clicked yes. nothing happens.
I have htcs home / customier too. and ever since the install I can't fully turn off my phone using the power button.
help please. I just wanted the phone back to default. Not bloatware free.
wrong key combination dude, hard reset is the two soft keys, and then the soft reset button
Push and hold the two soft-keys, then HOLD soft reset until screen changes. It may take a couple attempts...
You're not kidding!!
I tried, same result.. tried again, and again... after about 12 tries it finally worked. Man what a PITA!!
Just persevere!
Luck

Hard reset problem

Can anyone help me out, I am trying to hard reset my phone, but what am I doing wrong?
My phone is turned on
I press volume down botton and enter round botton.
there after i press reset
I keep pressing the other 2 bottons
Still nothing happens, the phone restarts, but no hard reset!!!
I have 1.37 rom with unasigned hard spl. But I do not have any usb cable here at my work.
Help help help
Are you pressing and releasing the reset button? You need to hold it down until the device boots.
I had the same problem as well...couldnt get it to hard reset so i went through the settings list and did it through there.
Click on start, go to settings, then click on clear storage..choose clear storage and format internal storage...enter 1234 and then click on ok...when it asks to confirm press yes and once done it will then clear everything and reset the phone back to the way it was when you first got it.
voodooflux said:
Are you pressing and releasing the reset button? You need to hold it down until the device boots.
Click to expand...
Click to collapse
Still isn't doing that...
Should I press volume down botton and enter botton when the phone is in windows?
Keep all three pressed down dont release the reset button ... It will go through , well did for me as I noticed it did the same thing to me. I only released once the screen had changed to the options for format
Or why not do the hard reset as i described earlier?? lol..much easier and dont have to worry about pressing 3 buttons at the same time
Spawn12 said:
Or why not do the hard reset as i described earlier?? lol..much easier and dont have to worry about pressing 3 buttons at the same time
Click to expand...
Click to collapse
If I could of, I would of! I am at my work and I have sensative stuff on the internal storage. To big to blue tooth them.
oddball1 said:
If I could of, I would of! I am at my work and I have sensative stuff on the internal storage. To big to blue tooth them.
Click to expand...
Click to collapse
Ok well you do realise even with the way ive said to do it, you dont have to wipe your internal storage??..you have the options of clear storage only...format internal storage or clear storage and format internal storage.
If your going to do a hard reset with the way your trying to do it...you will lose all your info on your internal storage...so it doesnt make any difference does it??. Your still going to lose all your sensitive info doing it the way your trying to do it ie hold volume button down, press center button then press reset button and release the reset button whilst holding down the other 2 buttons.
Not sure whether this helps, but I also had the back of the device removed when I did a hard reset via the button method.
Sounds like Spawn's solution might suit you better though.
excuse me if im wrong as i dont own a diamond (waiting for the pro to decide) but doesnt the stylus have to be removed or something like that to hard reset. maybe thats the issue? I think i read that somewhere.
Again, not sure but try with the stylus in or out or something :S
billybobjones said:
excuse me if im wrong as i dont own a diamond (waiting for the pro to decide) but doesnt the stylus have to be removed or something like that to hard reset. maybe thats the issue? I think i read that somewhere.
Click to expand...
Click to collapse
That's certainly the case on the Diamond as the reset button is beneath the stylus.
I have the same problem. I'm using TruxT rom. Cannot perform a hard reset. I hold the Volume Down, Center, Press Reset with the stylus in my hard and hold it until the device reset but... no "hard reset screen". It's annoying.
I've installed the HTC Scrolling cab from (http://forum.xda-developers.com/showthread.php?t=343313) and since that my touchscreen don't work at all. There's only the D-Pad and all the hardware buttons that work.
I've read that simply uninstall this app will fix the problem but theres another problem. When I connect my phone to my computer, I'm force to connect it as an "external drive" because it's the way it was connect last time I did it. I cannot change the setting to "Active sync" when "Connect to pc" window appears using the hardware buttons so I'm stuck with a huge headache now. lol
Is there a way to force ActiveSync to detect my phone when I plug it ? My goal is to uninstall this app using ActiveSync instead of performing a hard reset. Anyway, it seems I can't do it.

Categories

Resources